Open Access. Powered by Scholars. Published by Universities.®

Chemistry Commons™

Open Access. Powered by Scholars. Published by Universities.®

Engineering

Institution
Keyword
Publication Year
Publication
Publication Type
File Type

Articles 1111 - 1140 of 4155

Full-Text Articles in Chemistry

Electrochemical Performance Improvement Of Li2Mno3 Cathode Materials By Mgf2 Coating, Du-Dan Wang, Fei Wang, Huan-Huan Zhai, Yu-Peng Li, Na-Chuan Yang, Kang-Hua Chen Apr 2020

Electrochemical Performance Improvement Of Li2Mno3 Cathode Materials By Mgf2 Coating, Du-Dan Wang, Fei Wang, Huan-Huan Zhai, Yu-Peng Li, Na-Chuan Yang, Kang-Hua Chen

Journal of Electrochemistry

Cathode material Li2MnO3 has received more and more attention owing to its high theoretical capacity (459 mAh·g -1). However, the low initial coulombic efficiency and the poor cycle stability hamper its practical application in lithium-ion batteries. Herein, we investigated the crystal structure and electrochemical performance of Li2MnO3 by introducing MgF2 coating layer. The results indicated that the conversion of partial layer Li2MnO3 to spinel phase induced by MgF2 coating could reduce the initial irreversible capacity and improve the first cycle efficiency. The initial coulombic efficiencies of the 0.5wt.%, …

Go to article

Syntheses And Properties Of Ta5+ Doped Li7La3Zr2O12, Feng-Feng Peng, Shi-You Li, Tong-Tong Geng, Chun-Lei Li, Shuang-Wei Zeng Apr 2020

Syntheses And Properties Of Ta5+ Doped Li7La3Zr2O12, Feng-Feng Peng, Shi-You Li, Tong-Tong Geng, Chun-Lei Li, Shuang-Wei Zeng

Journal of Electrochemistry

The tantalum ion (Ta 5+) doped garnet-type inorganic solid electrolyte Ta-LLZO was prepared by solid state reaction, and the effect of doping amount on the properties of the materials was investigated. The materials were characterized by X-ray diffraction (XRD), field emission electron scanning microscopy (FESEM) and electrochemical impedance spectroscopy (EIS). And the cycle stability was tested by assembly of LiFePO4//LLZTO//Li all solid lithium battery. The results show that with the increase of Ta 5+ doping amount, the material appeared to form a single cubic phase structure. When the Ta 5+ doping content became 14.09wt.%, x=0.3, the …

Go to article

Recent Advances Of Co2 Electrochemical Reduction In Solid Oxide Electrolysis Cells, Yi-Hang Li, Chang-Rong Xia Apr 2020

Recent Advances Of Co2 Electrochemical Reduction In Solid Oxide Electrolysis Cells, Yi-Hang Li, Chang-Rong Xia

Journal of Electrochemistry

Solid oxide electrolysis cells (SOECs) have stimulated wide interests for their promising application in the reduction of CO2 emissions and the storage of renewable energy. Here, the advances made in the development of cathode materials including cermets and perovskite oxides in our research group, are summarized, along with the design of cell configurations. The electrochemical kinetics and performances of cathodes and cells are discussed and analyzed. It is expected that this brief review offers critical insights and useful guidelines for developing superior electrodes and SOECs in the future.

Go to article

Perovskite Catalysts For Fuel Reforming In Sofc:A Review And Perspective, Tong Wei, Jian Li, Li-Chao Jia, Bo Chi, Jian Pu Apr 2020

Perovskite Catalysts For Fuel Reforming In Sofc:A Review And Perspective, Tong Wei, Jian Li, Li-Chao Jia, Bo Chi, Jian Pu

Journal of Electrochemistry

Solid oxide fuel cell (SOFC) is a generating device by electrochemical reaction to transfer the chemical energy of fossil fuels (coal, oil and gas, etc.), the biomass fuel or other hydrocarbon fuels directly into electricity with higher energy conversion efficiency and lower pollution, which is recognized to be efficient green energy technology in the 21st century. However, when hydrocarbons are directly used as fuel, carbon deposition is easy to occur in nickel-based anode, thus, losing electrochemical catalytic activity. Fuel pre-reforming on the outside of the anode is an effective solution, which strongly relies on highly efficient and stable reforming catalysts. …

Go to article

Research Progress In Ethane Dehydrogenation To Cogenerate Power And Value-Added Chemicals In Solid Oxide Fuel Cells, Yun Fan, Qi Wang, Jun Li, Jing-Li Luo, Xian-Zhu Fu Apr 2020

Research Progress In Ethane Dehydrogenation To Cogenerate Power And Value-Added Chemicals In Solid Oxide Fuel Cells, Yun Fan, Qi Wang, Jun Li, Jing-Li Luo, Xian-Zhu Fu

Journal of Electrochemistry

Increasing supplies of methane/shale gas have promoted global development of higher value chemicals such as ethylene production by ethane, which dramatically changes the markets of petrochemical industry. Clean and efficient transformation of ethane into higher value chemicals has far-reaching significance. Ethylene production through ethane steam cracking is a relatively matured technology for industrial production. However, the process consumes large amounts of energy and the presence of carbon deposition becomes a serious problem which is difficult to be solved. The cogenerated energy-chemicals solid oxide fuel cells have been widely studied because fuel gas can be converted into high-value chemicals via spontaneous …

Go to article

Preparation And Characterization Of Cathode Supported Solid Oxide Fuel Cell, Xiao-Nan Bao, Guang-Jun Zhang, Shao-Rong Wang Apr 2020

Preparation And Characterization Of Cathode Supported Solid Oxide Fuel Cell, Xiao-Nan Bao, Guang-Jun Zhang, Shao-Rong Wang

Journal of Electrochemistry

A site deficient (La0.8Sr0.2)0.95MnO3 (LSM95) powder was synthesized by solid state reaction as a cathode material. The commercial Zr0.9Sc0.1SO1.95 (SSZ) was selected as an electrolyte material and La0.8Sr0.2Cr0.5Mn0.5O3- (LSCrM) was synthesized by sol-gel method as an anode material. Accordingly, single cells of LSCrM-CeO2|SSZ|3YSZ-LSM95 were prepared by tape casting, sintering and impregnation. The single cell test results for LSCrM-CeO2|SSZ|3YSZ-LSM95 with 0.11 g·cm -2 CeO2 and using CH4 as a fuel showed the power …

Go to article

Direct Carbon Solid Oxide Fuel Cells, Jiang Liu, Xiao-Min Yan Apr 2020

Direct Carbon Solid Oxide Fuel Cells, Jiang Liu, Xiao-Min Yan

Journal of Electrochemistry

Carbon is richly reserved in coal, biomasses, and many other nature resources. It is usually used as an energy source through oxygen oxidation reaction. The oxidation is generally realized through combustion which causes serious air pollution. Besides, the conversion efficiency of generating electricity through the combustion process is limited by Carnot efficiency. A direct carbon solid oxide fuel cell (DC-SOFC) is a solid oxide fuel cell (SOFC) directly operated with solid carbon as the fuel. It can convert the chemical energy of carbon into electricity with high efficiency. The concentration of produced CO2 from a DC-SOFC is so high …

Go to article

Research Progress Of Fuel Electrode In Oxide-Ion Conducting Solid Oxide Electrolysers, Ling-Ting Ye, Kui Xie Apr 2020

Research Progress Of Fuel Electrode In Oxide-Ion Conducting Solid Oxide Electrolysers, Ling-Ting Ye, Kui Xie

Journal of Electrochemistry

Solid oxide electrolysers are now attracting much more attentions because they can efficiently produce fuels by electrolyzing H2O/CO2. In this paper, a comprehensive introduction to the recent progress in the development of fuel electrode (cathode) materials is provided. The advantages, disadvantages and development trend towards various cathode materials are pointed out. The key scientific and technological problems in this field are emphasized.

Go to article

Development Status And Prospects Of Hydrogen Production By High Temperature Solid Oxide Electrolysis, Wen-Qiang Zhang, Bo Yu Apr 2020

Development Status And Prospects Of Hydrogen Production By High Temperature Solid Oxide Electrolysis, Wen-Qiang Zhang, Bo Yu

Journal of Electrochemistry

Solid oxide electrolysis cell is an advanced energy conversion device with high efficiency, simplicity, flexibility, and environmental friendliness. It is currently a research hotspot in the international energy field. This paper introduces and analyzes the basic principles, key materials, system components and developments of solid oxidation electrolysis cells. Furthermore, the recent research progresses, challenges and future development directions in solid oxidation electrolysis cells in the field of high-efficiency hydrogen production are summarized and outlined.

Go to article

Nio@Rgo Supported Palladium And Silver Nanoparticles As Electrocatalysts For Oxygen Reduction Reaction, Shuo Yao, Tai-Zhong Huang, Rizwan Haider, Heng-Yi Fang, Jie-Mei Yu, Zhan-Kun Jiang, Dong Liang, Yue Sun, Xian-Xia Yuan Apr 2020

Nio@Rgo Supported Palladium And Silver Nanoparticles As Electrocatalysts For Oxygen Reduction Reaction, Shuo Yao, Tai-Zhong Huang, Rizwan Haider, Heng-Yi Fang, Jie-Mei Yu, Zhan-Kun Jiang, Dong Liang, Yue Sun, Xian-Xia Yuan

Journal of Electrochemistry

For pervasive applications of fuel cells, highly efficient and economical materials are required to replace Pt-based catalysts for oxygen reduction reaction (ORR). In this study, the NiO@rGO, Pd-NiO@rGO and Ag-NiO@rGO nanoparticles were synthesized, and their catalytic performances toward ORR were investigated. The results revealed that all the three materials were capable of catalyzing ORR, but both the Pd-NiO@rGO and Ag-NiO@rGO showed the better performances compared with the NiO@rGO in terms of the reaction pathway being 4-electron process, the increases of the onset potential and the intermediate yielding rate, as well as the extended stability. Moreover, the effect of Pd modification …

Go to article

Construction And Electrochemical Performance Of Garnet-Type Solid Electrolyte/Al-Li Alloy Interface, Jia-Lin Ma, Hong-Chun Wang, Zheng-Liang Gong, Yong Yang Apr 2020

Construction And Electrochemical Performance Of Garnet-Type Solid Electrolyte/Al-Li Alloy Interface, Jia-Lin Ma, Hong-Chun Wang, Zheng-Liang Gong, Yong Yang

Journal of Electrochemistry

Garnet-type solid electrolyte is a newly developed Li ion conductor and promising in the application of all-solid-state batteries. However, Garnet is incompatible with Li anode, which restricts the application of Garnet-type solid batteries. In order to improve the contact between Garnet-type solid electrolyte and Li electrode, a composite anode which contains Al-Li alloy (Al4Li9) was prepared as an electrode. Al-Li alloy has many advantages such as easy preparation, low cost, simple post-treatment and high capacity. Garnet-type Li6.5La3Zr1.75W0.25O12 (LLZWO) was synthesized via solid-state reaction. Garnet solid electrolyte has …

Go to article

Scanning Electron Microscopy (Sem) Investigation Of Morphology Changes In The Reduction Of Silica Nanoparticles To Elemental Silicon, Allison M. Cairns Apr 2020

Scanning Electron Microscopy (Sem) Investigation Of Morphology Changes In The Reduction Of Silica Nanoparticles To Elemental Silicon, Allison M. Cairns

University Honors Theses

The application of silicon nanoparticles varies from energy storage materials, to drug-delivery, and molecular recognition. Various chemical and physical properties of the Si nanoparticles arise from their morphology. This paper aims to reveal the morphology of Si nanoparticles following magnesiothermic reduction of silica (SiO2) nanoparticles. Two sets of SiO2 nanoparticles were used, commercially available NanoXact nanoparticles and laboratory-synthesized Stöber nanoparticles. A Zeiss Sigma VP FEG SEM was used to examine the morphology. Following the magnesiothermic reduction, the nanoparticles were etched with HF. Ten sets of images were taken of both Stöber and NanoXact nanoparticles: 1,2: the SiO …

Go to article

Lignin: A Likely Precursor Of A Significant Fraction Of Humic Substances Via Oxidative Transformations, Seyyedhadi Khatami Apr 2020

Lignin: A Likely Precursor Of A Significant Fraction Of Humic Substances Via Oxidative Transformations, Seyyedhadi Khatami

Chemistry & Biochemistry Theses & Dissertations

Lignin is a major component of decaying terrestrial vegetation in soils and has been arguably reported to contribute substantially to the formation of soil carbon humus, and natural dissolved organic matter (DOM). To better understand the process by which this humification occurs, lignin and lignin-derived monomers were subjected to both biotic and abiotic oxidation processes. Two well-known oxidative transformation strategies were employed. The first involved the fungal degradation of brown-rot degraded wood subjected to a white-rot fungus (Phanerochaete chrysosporium) whose enzymes are particularly effective in lignin degradation via enzymatic oxidation. This enzymatic attack was monitored by ultrahigh resolution …

Go to article

Fiber-Optic Micro-Probes For Measuring Acidity Level, Temperature, And Antigens, Yinfa Ma, Honglan Shi, Qingbo Yang, Hai Xiao Mar 2020

Fiber-Optic Micro-Probes For Measuring Acidity Level, Temperature, And Antigens, Yinfa Ma, Honglan Shi, Qingbo Yang, Hai Xiao

Chemistry Faculty Research & Creative Works

A pH micro-probe, a temperature micro-probe, and an immuno-based micro-probe each include a shaft for transmuting an input light signal and a tip for inserting into a cell or other substance for measuring pH, temperature, and/or antigens. The pH micro-probe and the temperature micro-probe each include a luminescent material positioned on the tip of the micro-probe. The light signal excites the luminescent material so that the luminescent material emits a luminescent light signal. The luminescent light signal has a property value dependent on the pH or temperature being measured and reflects back through the shaft for being measured by a …

Go to article

An Assessment Of The Spatial Variation Of Isotopic Ratios In A Candu-6 Reactor For Nuclear Treaty Monitoring, Aaron W. Burkhardt Mar 2020

An Assessment Of The Spatial Variation Of Isotopic Ratios In A Candu-6 Reactor For Nuclear Treaty Monitoring, Aaron W. Burkhardt

Theses and Dissertations

The Preparatory Commission for the Comprehensive Nuclear Test Ban Treaty Organization developed the International Monitoring System for monitoring for nuclear explosive testing and compliance with nuclear treaties. Many of the International Monitoring System stations are capable of detecting radionuclides that can be used to determine their origin and creation environment. However, there is not a single unique signature associated with each creation environment. Nuclear reactors, for example, can have a wide range of isotopic concentrations caused by spatial variations in neutron flux intensity and energy. As a single sample only provides a single isotopic measurement, this can make disambiguation difficult …

Go to article

A Machine Learning Approach To Characterizing Particle Morphology In Nuclear Forensics, Daniel A. Gum Mar 2020

A Machine Learning Approach To Characterizing Particle Morphology In Nuclear Forensics, Daniel A. Gum

Theses and Dissertations

A machine learning approach is taken to characterizing a group of synthetic uranium bearing particles. SEM images of these lab-created particles were converted into a binary representation that captured morphological features in accordance with a guide established by Los Alamos National Laboratory. Each particle in the dataset contains an association with chemical creation conditions: processing method, precipitation temperature and pH, calcination temperature are most closely tied to particle morphology. Additionally, trained classifiers are able to relate final products between particles, implying that morphological features are shared between particles with similar composition.

Go to article

Structures And Electrochemical Properties Of Sn-Cl Co-Doped Li2Mno3 As Positive Materials For Lithium Ion Batteries, Fei Wang, Huan-Huan Zhai, Du-Dan Wang, Yu-Peng Li, Kang-Hua Chen Feb 2020

Structures And Electrochemical Properties Of Sn-Cl Co-Doped Li2Mno3 As Positive Materials For Lithium Ion Batteries, Fei Wang, Huan-Huan Zhai, Du-Dan Wang, Yu-Peng Li, Kang-Hua Chen

Journal of Electrochemistry

Positive material Li2MnO3 shows the highest ratio of lithium to manganese among lithium-rich materials and exhibites the theoretical capacity up to 458 mAh·g-1, making it one of the most promising cathode materials. However, this material has the intrinsic low electrical conductivity and poor cycle stability. In this paper, Li2MnO3, the lithium-rich positive material, was prepared by sol-gel method using acetate as raw material and citric acid as a complexing agent. By using SnC2O4 as a tin source, Sn4+ instead of Mn4+ was introduced to obtain the …

Go to article

Preparations Of Nickel-Iron Hydroxide/Sulfide And Their Electrocatalytic Performances For Overall Water Splitting, Hang-Shuo Lu, Xiao-Bo He, Feng-Xiang Yin, Guo-Ru Li Feb 2020

Preparations Of Nickel-Iron Hydroxide/Sulfide And Their Electrocatalytic Performances For Overall Water Splitting, Hang-Shuo Lu, Xiao-Bo He, Feng-Xiang Yin, Guo-Ru Li

Journal of Electrochemistry

The Ni-Fe/Ti oxygen evolution electrode was prepared by electrodeposition on a titanium mesh substrate. Then, the as prepared Ni-Fe/Ti electrode was used to derive the Ni-Fe-S/Ti hydrogen evolution electrode through solid phase sulfuration. The effects of the molar ratio of Ni2+ to Fe3+ in the electrolyte and the amount of thiourea on the structures and electrochemical performances of Ni-Fe/Ti and Ni-Fe-S/Ti electrodes were investigated. The results show that the oxygen evolution performance of Ni-Fe/Ti electrode was first increased and then decreased with the increase of nickel ion content in the electrolyte. The Ni9Fe1/Ti electrode exhibited the best oxygen …

Go to article

Electrochemical Impedance Spectroscopy For Electrocatalytic Interfaces And Reactions: Classics Never Die, Jun Huang Feb 2020

Electrochemical Impedance Spectroscopy For Electrocatalytic Interfaces And Reactions: Classics Never Die, Jun Huang

Journal of Electrochemistry

This review article recapitulates electrochemical impedance spectroscopy (EIS) studies in the field of electrocatalysis. The history of this specialized field, ranging from the beginning of the twentieth century to now, is outlined. We then chronicle milestones of the impedance theory. Special emphases are put on the Dolin-Ershler model, the prevailing model for analyzing adsorption impedance data. Afterwards, we narrow into a very specific and fundamental topic, the double-layer capacitance at platinum (Pt) single crystals. We discuss the challenges in experimentation and theoretical understanding thereof. We cast doubts into the validity of using the Dolin-Ershler model to obtain the double-layer capacitance …

Go to article

Electrochemical Preparations And Applications Of Nano-Catalysts With High-Index Facets, Chi Xiao, Na Tian, Zhi-You Zhou, Shi-Gang Sun Feb 2020

Electrochemical Preparations And Applications Of Nano-Catalysts With High-Index Facets, Chi Xiao, Na Tian, Zhi-You Zhou, Shi-Gang Sun

Journal of Electrochemistry

The performance of catalysts highly depends on their surface structure and composition. Nanocrystals bounded by high-index facets usually exhibit high catalytic activity due to their high-density low-coordinated step atoms with high reactivity. In this paper, we have reviewed the preparations of noble metals (e.g., Pt, Pd and Rh) nanocatalysts with high-index facets by electrochemical square-wave potential method developed in our group. The square-wave potential method includes a nucleation procedure to generate nuclei, followed by a square-wave potential procedure for a certain period of time for the growth of nuclei into nanocrystals. The formation mechanism of high-index facets is also discussed. …

Go to article

Recent Progress In The Mechanistic Understanding Of Co2 Reduction On Copper, Matthew M Sartin, Wei Chen, Fan He, Yan-Xia Chen Feb 2020

Recent Progress In The Mechanistic Understanding Of Co2 Reduction On Copper, Matthew M Sartin, Wei Chen, Fan He, Yan-Xia Chen

Journal of Electrochemistry

In this review, we present the major developments in the understanding of the mechanisms of the electrochemical reduction of CO2 from a historical perspective. Most of the work discussed in this review was carried out at copper electrodes, as this is the only material at which hydrocarbons are produced in reasonable quantities. The emphasis focuses on the differentiation of mechanisms for the generation of C1 and C2 products as well as factors and methods for controlling the product selectivity of CO2 reduction. We have highlighted ambiguities, assumptions, and important methodologies, such as differential electrochemical mass spectrometry and electrochemical …

Go to article

Effect Of Nitrogen Content In Catalyst Precursor On Activity Of Fen/C Catalyst For Oxygen Reduction Reaction, Zhi Yang, Ya-Yun Shen, E Zhou, Cheng-Ling Wei, Hao-Li Qin, Juan Tian Feb 2020

Effect Of Nitrogen Content In Catalyst Precursor On Activity Of Fen/C Catalyst For Oxygen Reduction Reaction, Zhi Yang, Ya-Yun Shen, E Zhou, Cheng-Ling Wei, Hao-Li Qin, Juan Tian

Journal of Electrochemistry

Non-noble metal catalysts with high activity and low cost have attracted increasing interest as potential catalysts for oxygen reduction reaction (ORR) to replace Pt-based catalysts. In this paper, the effect of nitrogen content in catalyst precursor on ORR activity of FeN/C catalyst was investigated by X-ray diffraction (XRD), Brunauer-Emmet-Teller (BET) surface area and pore size distribution measurements, transmission electron microscope (TEM), thermogravimetric analysis (TGA), and rotating disk electrode (RDE) techniques. The results show that the most active catalyst was obtained by pyrolysis in argon at 1050 °C with a catalyst precursor containing 20wt% 1,10-phenanthroline, 1wt% Fe and Black Pearl 2000. …

Go to article

Challenges In The Activity And Stability Of Pt-Based Catalysts Toward Orr, Tuo Zhao, Er-Gui Luo, Xian Wang, Jun-Jie Ge, Chang-Peng Liu, Wei Xing Feb 2020

Challenges In The Activity And Stability Of Pt-Based Catalysts Toward Orr, Tuo Zhao, Er-Gui Luo, Xian Wang, Jun-Jie Ge, Chang-Peng Liu, Wei Xing

Journal of Electrochemistry

The development of highly efficient oxygen reduction reaction (ORR) catalysts is the key to the commercialization of fuel cells, where the sluggish ORR reaction rate needs to be overcome by adjusting the intermediates adsorption energies on the catalytic surfaces. To-date, platinum (Pt)-based materials are the-state-of-the-art catalysts in terms of both activity and stability in ORR, making them the preferred choice for commercial applications. However, the high cost of Pt-based catalysts limits their widespread use, leading to massive effects paid in reducing Pt loading, improving catalyst activity and stability. This article illustrates the challenges in the ORR reaction and introduces the …

Go to article

Research Progresses In Polymeric Proton Exchange Membranes For Fuel Cells, Xu-Po Liu, Yun-Feng Zhang, Shao-Feng Deng, De-Li Wang, Han-Song Cheng Feb 2020

Research Progresses In Polymeric Proton Exchange Membranes For Fuel Cells, Xu-Po Liu, Yun-Feng Zhang, Shao-Feng Deng, De-Li Wang, Han-Song Cheng

Journal of Electrochemistry

Proton exchange membrane (PEM) is one of the key components in PEM fuel cells, which possesses the function of separating the cathode and anode, affording proton transport channels and preventing fuel permeability. The property of PEM significantly influences the performance and service life of fuel cells. Nowadays, the commercially used Nafion membranes have the shortcomings of serious fuel permeability, low proton conductivity at elevated temperature and high price, which limits the rapid development of PEM fuel cells. Therefore, it seems to be urgent to develop novel PEMs with low cost and good comprehensive properties. Polymeric proton exchange membrane is an …

Go to article

Lithium Storage Performance Of High Capacity Material Si@CPzs In Lithium Ion Batteries, Qing-Nuan Zhang, Fang-Fang Zhang, Hong-Xia Li, Bing-Jun Yang, Xiao-Cheng Li, Juan Yang Feb 2020

Lithium Storage Performance Of High Capacity Material Si@CPzs In Lithium Ion Batteries, Qing-Nuan Zhang, Fang-Fang Zhang, Hong-Xia Li, Bing-Jun Yang, Xiao-Cheng Li, Juan Yang

Journal of Electrochemistry

Carbon layers with different thicknesses were introduced into the surfaces of silicon (Si) nanoparticles by sol-gel method using poly (cyclotriphosphazene-co-4, 4'-sulfonyldiphenol) as the carbon source. Technologies of X-ray diffraction, thermo-gravimetric analysis, Brunauer-Emmett-Teller and transmission electron microscopy were employed to analyze the structures and components of the as-prepared Si@CPZS composites. Electrochemical performance of Si@CPZS with different carbon thicknesses was studied. The results showed that Si@CPZS with carbon thickness of 10 nm possessed the best performance. Its capacity remained 940 mAh·g-1 after 290 cycles under 500 mA·g-1. As the addictive, the graphite-based anode contained 30% of …

Go to article

Atomic Force Microscopic Characterization Of Solid Electrolyte Interphase In Lithium Ion Batteries, Qing-Yu Dong, Yan-Li Chu, Yan-Bin Shen, Li-Wei Chen Feb 2020

Atomic Force Microscopic Characterization Of Solid Electrolyte Interphase In Lithium Ion Batteries, Qing-Yu Dong, Yan-Li Chu, Yan-Bin Shen, Li-Wei Chen

Journal of Electrochemistry

In recent years, the rapid growing in the electric vehicle market has raised higher requirement on the lithium-ion batteries (LIBs) performance towards energy density and safety. However, considering the successful development of LIBs techniques in the past 30 years, there is little room left for improving the LIBs performance on the aspects related to the electrode materials, battery structure design and production processes. It is important to pursue more comprehensive fundamental understanding in the entire system and working principle of LIBs. Solid electrolyte interphase (SEI), existing between the electrode material and the electrolyte, has been proved to be an important …

Go to article

In-Situ Raman Spectroscopic Study Of Electrochemical Reactions At Single Crystal Surfaces, Min Su, Jin-Chao Dong, Jian-Feng Li Feb 2020

In-Situ Raman Spectroscopic Study Of Electrochemical Reactions At Single Crystal Surfaces, Min Su, Jin-Chao Dong, Jian-Feng Li

Journal of Electrochemistry

Since the 1970s, in-situ spectroscopy (Raman, infrared, etc.) has been used to systematically study the electrochemical interfacial reactions which can provide more information about surface reactions and reveal the mechanisms from microscopic view due to its excellent surface sensitivity and energy resolution. With the development of nano-technology, surface-enhanced Raman scattering effect spectroscopy has made rapid progress. Recently, the emergence of SHINERS provides a good in-situ spectroscopic technique for the study of catalytic reactions on single crystal model electrodes with deterministic surface structure. In this paper, we have summarized the application of SHINERS in the study of …

Go to article

Research Progresses In Ni-Co-Mn/Al Ternary Concentration Gradient Cathode Materials For Li-Ion Batteries, Chun-Fang Zhang, Wen-Gao Zhao, Shi-Yao Zheng, Yi-Xiao Li, Zheng-Liang Gong, Zhong-Ru Zhang, Yong Yang Feb 2020

Research Progresses In Ni-Co-Mn/Al Ternary Concentration Gradient Cathode Materials For Li-Ion Batteries, Chun-Fang Zhang, Wen-Gao Zhao, Shi-Yao Zheng, Yi-Xiao Li, Zheng-Liang Gong, Zhong-Ru Zhang, Yong Yang

Journal of Electrochemistry

Nickel-rich ternary materials with large reversible capacity as well as high operating voltage are considered as the most promising candidate for next generation lithium-ion batteries (LIBs). However, the inferior cycle stability and thermal stability have limited their widely commercial applications. Concentration gradient design of Ni-Co-Mn/Al ternary concentration gradient materials have been extensively studied in the past decade, which can ensure high cycle capacity while maintaining excellent cycle stability. In this paper, the latest research progresses in Ni-Co-Mn/Al ternary concentration gradient materials for LIBs are reviewed. Firstly, we summarize the different synthesis methods of ternary concentration-gradient materials, especially focusing on the …

Go to article

Preparation And Electrocatalytic Performance Of Nico2O4/Ni Foam For Hydrogen Peroxide Electrooxidation, Wei-Wei Chen, Fei-Fan Zhang, Jia-Liang Du, Yi Wang, Chun-Lin Zhao, Kai Zhu, Dian-Xue Cao, Gui-Ling Wang Feb 2020

Preparation And Electrocatalytic Performance Of Nico2O4/Ni Foam For Hydrogen Peroxide Electrooxidation, Wei-Wei Chen, Fei-Fan Zhang, Jia-Liang Du, Yi Wang, Chun-Lin Zhao, Kai Zhu, Dian-Xue Cao, Gui-Ling Wang

Journal of Electrochemistry

The electrodes of Ni foam supported NiCo2O4 nanowires were prepared by hydrothermal method, followed by a thermal treatment in air, and were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). It was found that the NiCo2O4 nanowires had a diameter of about 50 nm with a length up to 3 ~ 5 μm. The catalytic performances of the Ni foam supported NiCo2O4 nanowires for H2O2 electrooxidation were studied by cyclic voltammetry and chronoamperometry. The results show that the Ni foam supported NiCo …

Go to article

Surface Reservoirs Dominate Dynamic Gas-Surface Partitioning Of Many Indoor Air Constituents, Chen Wang, Douglas B. Collins, Caleb Arata, Allen H. Goldstein, James M. Mattila, Delphine K. Farmer, Laura Ampollini, Peter F. Decarlo, Atila Novoselac, Marina E. Vance, William W. Nazaroff, Jonathan P.D. Abbatt Feb 2020

Surface Reservoirs Dominate Dynamic Gas-Surface Partitioning Of Many Indoor Air Constituents, Chen Wang, Douglas B. Collins, Caleb Arata, Allen H. Goldstein, James M. Mattila, Delphine K. Farmer, Laura Ampollini, Peter F. Decarlo, Atila Novoselac, Marina E. Vance, William W. Nazaroff, Jonathan P.D. Abbatt

Faculty Journal Articles

Human health is affected by indoor air quality. One distinctive aspect of the indoor environment is its very large surface area that acts as a poorly characterized sink and source of gas-phase chemicals. In this work, air-surface interactions of 19 common indoor air contaminants with diverse properties and sources were monitored in a house using fast-response, on-line mass spectrometric and spectroscopic methods. Enhanced-ventilation experiments demonstrate that most of the contaminants reside in the surface reservoirs and not, as expected, in the gas phase. They participate in rapid air-surface partitioning that is much faster than air exchange. Phase distribution calculations are …

Go to article

First Prev Next Last