Pharmaceutics and Drug Design Commons^™

Accelerating Wound Healing Rates With Cucurbita Pepo Leaf Extract Loaded Electrospun Poly(Methyl Methacrylate)/Halloysite/Chitosan/ Caco₃ Composite Nanofibers Through In Vitro And In Vivo Assessments, Samar A. Salim

Nanotechnology Research Centre

Cucurbita pepo leaf extract (CPE) was incorporated into electrospun poly(methyl methacrylate)/ halloysite/chitosan/ CaCO₃ (PMMA/Hal/CS/CaCO₃) composite nanofibers to develop a novel biomaterial for accelerating wound healing rates. The different nanofibrous scaffolds were successfully fabricated and characterized through scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (FTIR), and X-ray diffraction (XRD). SEM analysis revealed uniform, smooth nanofibers, while FTIR and XRD confirmed the integration of CPE into nanofiber matrix, indicating an amorphous structure and effective dispersion of the extract. In vitro agar well-diffusion and antibiofilm assays revealed that the optimized formulation exhibited potent antimicrobial activity against wound-associated pathogens. The nanofibers composite based on …

Circulating Biomarker Results From A Phase 2 Study Of Seralutinib In Pulmonary Arterial Hypertension, Robin Osterhout, Athénaïs Boucly, Raymond L. Benza, Richard N. Channick, Kelly M. Chin, Robert P. Frantz, Anna R. Hemnes, Luke S. Howard, Vallerie V. Mclaughlin, Olivier Sitbon, Jean-Luc Vachiéry, Rotham T. Zamanian, Richard Aranda, Matt Cravets, Zhaoqing Ding, Thao Duong-Verlé, David Mattola, Robert F. Roscigno, Ravikumar Sitapara, Lawrence S. Zisman, Jean-Marie Bruey, Hossein-Ardeschir Ghofrani

Department of Medicine Faculty Publications

[Introduction] To the Editor: Pulmonary arterial hypertension (PAH) is a progressive disease characterized by obstructive pulmonary arterial remodeling (1). Seralutinib, an investigational inhaled tyrosine kinase inhibitor, potently and selectively targets kinases relevant to PAH pathobiology including platelet-derived growth factor receptors (PDGFR) α and β, colony stimulating factor 1 receptor (CSF1R), and mast/stem cell growth factor receptor kit (c-KIT) (2). In preclinical models, seralutinib improved cardiopulmonary hemodynamics, reversed pulmonary vascular pathology and decreased right ventricular hypertrophy (3). In TORREY, a phase 2, multicenter, double-blind, randomized, placebo-controlled trial in PAH, seralutinib significantly reduced pulmonary vascular resistance (PVR) after 24 weeks with good …

Smart Dressings Accelerating Wound Healing With Tranexamic Acid-Infused Aligned Electrospun Nanofibers: In Vitro And In Vivo Assessments, Samar A. Salim, Abdullah Elbadry, Eman Gomaa, Mennatullah Faisal, Elbadawy A. Kamoun

Nanotechnology Research Centre

The development of advanced wound dressings capable of accelerating healing and achieving effective hemostasis remains a critical challenge in managing traumatic and surgical wounds. This study reports the fabrication and comprehensive evaluation of a novel multilayered, sandwich-structured nanofiber scaffold composed of Tranexamic acid (TXA), chitosan (CS), polyvinyl alcohol (PVA), L-arginine, and polylactic acid (PLA) for biodegradable wound dressing applications. Using sequential electrospinning, a four-layered scaffold was developed as a smart wound dressing, comprising an immediate-release TXA-CS-PVA layer for rapid clotting, a hydrophobic PLA barrier layer for protection, a sustained-release L-arginine-PVA layer to promote tissue regeneration, and a final PLA protective …

Scaffolds With Spatiotemporally Controlled Growth Factor Delivery And Cyclodextrin-Enabled Antagonism Of Growth Factor Receptor Sequestration Promote Cutaneous Wound Healing, Jelena Marjanovic, Veronica Jurczuk, Lilian Valadares Tose, Yarixa Cintron Diaz, Francisco Fernandez Lima, Beatriz Abdo Abujamra, Sara Danker, Sinan Jabori, Devinder Singh, Jamie L. Burgess, Joshua Tam, Mohamadmahdi Samandari, Rivka C. Stone, Stephen C. Davis, Robert S. Kirsner, Marjana Tomic-Canic, Fotis M. Andreopoulos, Ivan Jozic

Mechanical & Aerospace Engineering Faculty Publications

Chronic wounds present a major burden to patients, health care professionals, and health care systems worldwide, yet treatment options remain limited and often ineffective. Although initially promising, growth factor-based therapies displayed limited and underwhelming effectiveness largely due to poor bioavailabilbioity and impaired receptor function within the chronic wound microenvironment. Here we demonstrate that chronic wounds exhibit elevated cholesterol synthesis, which disrupts growth factor signaling by sequestering receptors within lipid rafts. To address this, we developed a novel therapy combining growth factors with cyclodextrin in an ECM-mimetic scaffold, enabling localized cholesterol modulation and improved receptor accessibility. We demonstrate that this approach …

Novel Micro-And Nanoformulations Of Paclitaxel For Targeting Metastatic Breast, Non-Small Cell Lung, And Pancreatic Cancers, Lobat Tayebi, Mehran Alavi

Electrical & Computer Engineering Faculty Publications

Nonlinear pharmacokinetics resulting from high lipophilic and low oral bioavailability, and hypersensitivity reactions and hyperlipidemia caused by formulation by Cremophor EL have limited clinical effectiveness of paclitaxel (Taxol). In this way, there is the critical necessity of innovative drug delivery systems (DDSs) to mitigate severe side effects and overcome clinical limitations of paclitaxel. In recent years, various micro- and nanoformulations, specifically polymeric nanoparticles (NPs) and lipid NPs, have been presented and approved by the Food and Drug Administration (FDA). In addition, other nanoformulations, such as polymeric nanoparticles (NPs), micelles, liposomes, and mesoporous silica nanoparticles, have shown promising results in vitro …

Targeted Drug Delivery: Investigating Protein Corona Behavior, Atharva Markale

Theses

Due to high specificity and less toxicity, nanoparticles have become promising for targeted drug delivery against cancer, although they face challenges when they enter the bloodstream, making their behavior unpredictable. The deposition of proteins on nanoparticles, the protein corona, changes their biosignature, affecting their circulation, drug release potency, targeting ability, and immunogenicity. The continuous exchange of protein layers on a nanoscale is complex to analyze.

Nanoparticle tracking analysis (NTA) is a method to characterize nanoparticles in blood plasma by combining principles of light scattering microscopy and Brownian motion. In this work, time-dependent experiments with plasma were conducted to analyze the …

Nanoparticles For Applications In Specific Diagnostics And Precision Medicine, Naxhije Berisha

Dissertations, Theses, and Capstone Projects

Heterogeneity is common in the expression of cancer and treatment response. Precision medicine enables healthcare providers to tailor medical care to an individual's distinct genetic and environmental makeup. This customization has the potential to result in more efficient treatments while minimizing side effects. We believe that by studying the interface of nanotechnology and cancer medicine we can elucidate innovative solutions that address the challenges of disease heterogeneity. This includes advancements in drug delivery, formulations development, and diagnostic sensing. We highlight three studies that use nanotechnology for applications in precision medicine. In Chapter 2, we highlight design optimization of drug formulations …

4d Epr Oximetry Imaging For 4d Bioprinting And Tissue Engineering, Sajad Sarvari

Graduate Theses, Dissertations, and Problem Reports (ETD)

Bioprinting, akin to 3D printing, employs cell-laden hydrogels such as GelMA (Gelatine Methacrylate) and Alginate instead of plastic or resin to create biological structures. The printing process followed by subsequent tissue maturation is known as 4D bioprinting, where the fourth dimension is time. Ensuring adequate and consistent oxygen, O2, supply within 3D bioprint volume over the entire maturation period process is crucial, as even transient hypoxia can impact cellular behavior and phenotypes. However, printing of fully developed vasculature remains an unresolved technical challenge. Several approaches to chemically (peroxides) or biologically (photosynthesis) generate oxygen during bioprint maturation have been proposed. However, …

Electromechanical Effects On Micro And Nano Particles Generated From Drug Delivery Devices And Their Implications In Flow And Deposition Efficiency, Mohammed Ali, Mark Miller

Technology Faculty Publications and Presentations

This experimental investigation was undertaken to quantify the electrostatic charge and aerodynamic size distribution of the medicinal drug particles inhaled through an in-vitro mouth-throat (MT) in order to compare the amount of drugs can be delivered to the human lung while mimicking a patient is either sitting or lying. The MT model is a cadaver-based replica cast of human oral-pharyngeal-laryngeal region. Tested drug aerosols were generated by a commercially available metered dose inhaler (MDI). The MT model was placed inside a humidity (95%) and temperature (37^oC) controlled chamber. Its mouth-inlet was positioned horizontally and vertically to simulate sitting …

A Detailed Parameter Study Into The Dermal Absorption Of Chemical Warfare Agents And The Effects Of Pharmacokinetics, Koko Lear

Theses

Chemical warfare agents (CWAs) are substances of varying toxicity profiles. These chemicals exhibit complex dynamics and pose a serious health risk when released into the environment. A mathematical model based on Fick’s second law of diffusion was developed to comprehend how these compounds were absorbed into the skin. The analysis applied to both small and large doses and, successfully, predicted experimental results. This work also includes the effects of CWA physicochemical properties on evaporation and dermal absorption through the stratum corneum. A sensitivity analysis was conducted to assess the impacts of small variations in the initial dose, environmental conditions, and …

Nebulizer-Based Systems To Improve Pharmaceutical Aerosol Delivery To The Lungs, Benjamin M. Spence

Theses and Dissertations

Combining vibrating mesh nebulizers with additional new technologies leads to substantial improvements in pharmaceutical aerosol delivery to the lungs across therapeutic administration methods. In this dissertation, streamlined components, aerosol administration synchronization, and/or Excipient Enhanced Growth (EEG) technologies were utilized to develop and test several novel devices and aerosol delivery systems. The first focus of this work was to improve the poor delivery efficiency, e.g., 3.6% of nominal dose (Dugernier et al. 2017), of aerosolized medication administration to adult human subjects concurrent with high flow nasal cannula (HFNC) therapy, a form of continuous-flow non-invasive ventilation (NIV). The developed Low-Volume Mixer-Heater (LVMH) …

Continuous Manufacturing Of Pharmaceuticals Using Novel Platforms, Sarah S. Aboelela

Theses and Dissertations

Pharmaceuticals have been synonymously manufactured in a centralized, batch mode with less attention to process and formulation understanding. However, due to rising drug costs, shortages, and robustness issues, in addition to the alarming lack of flexibility and agility, regulatory agencies have pushed towards switching to continuous processes. They believed in continuous manufacturing, providing cleaner, flexible, and more efficient processes. Hence, it was foreseen to reduce development and manufacturing costs, time, and environmental impact and ensured drug product quality. Over the last two decades, continuous manufacturing quality, environmental, and economic advantages have been evident through many case studies and approved products …

Development Of Fluorescent Hyaluronic Acid Nanoparticles For Intraoperative Tumor Detection, Nicholas E. Wojtynek

Theses & Dissertations

Surgical resection remains to be the primary treatment for the majority of solid tumors, including breast cancer. The complete removal of the primary tumor, local metastases, and metastatic lymph nodes dramatically improve a patient’s treatment outcome and prognosis. Nevertheless, surgeons are limited to tactile and visual cues in distinguishing malignant and healthy tissue. This can result in a positive surgical margin (PSM), which occurs when tumor goes undetected and is left behind in the surgical cavity. PSMs decreases a patient’s prognosis and necessitate additional treatment in the form of surgery, radiation, and chemotherapy. An emerging imaging modality, known as fluorescence-guided …

Pilot Study Exploring The Effect Of Targeted Cox-2 Inhibition In Macrophages Responding To Neuronal Injury; Promoting Enhanced Axonal Regeneration, Alyssa Brauckmann

Electronic Theses and Dissertations

Celecoxib nanoemulsion (CXB-NE) has been developed as a macrophage targeted analgesics by Dr. Janjic and her team at Duquesne University, (Janjic et al, 2018; Liu et al, 2020; Saleem et al, 2019b; Vasudeva et al, 2014). The CXB-NE nanoemulsion carrying a Nonsteroidal Anti-inflammatory (NSAID) inhibitor of COX-2 activity result in a reduction in PGE2 expression in macrophages. Using CXB-NE in rats that have peripheral nerve injury constricting the sciatic nerve relieves hypersensitivity, a pain-like behavior. The treatment also decreases inflammation associated with this chronic constriction injury (Janjic et al, 2018; Saleem et al, 2019b; Stevens et al, 2019). In this …

Correlating The Physicochemical Properties Of Magnesium Stearate With Tablet Dissolution And Lubrication, Julie L. Calahan

Theses and Dissertations--Pharmacy

Magnesium stearate (MgSt) is the most commonly used pharmaceutical excipient and is present in over half the tablet formulations on the market. In spite of its popularity as an effective lubricant, it has been repeatedly recognized that there is significant variability between MgSt samples, which can cause inconsistent lubrication between batches of MgSt. The hypothesis of this research is that the batch-to-batch variability in tablet lubrication and dissolution observed in tablet formulations containing different MgSt samples can be correlated with differences in MgSt physicochemical properties (fatty acid salt composition, crystal hydrate form, particle size and surface area). Developing correlations between …

Effect Of 3d Printed Tablet Shape On Drug Release Profile, Christina Gedeon

Theses

There is a growing interest in utilizing additive manufacturing (AM) as a manufacturing tool to develop oral tablets for personalized medicine. This ultimate goal in mind, this study explores the feasibility of extrusion-based fused deposition modeling (FDM) to 3D print oral tablets with tunable design to control drug release profile. Tablets are printed using poly(vinyl alcohol) (PVA) loaded with model drugs: acetaminophen and caffeine. Hot melt extrusion (HME) is used to fabricate PVA filaments loaded with acetaminophen and caffeine. These filaments are used to fabricate a range of tablets with varying designs to prepare immediate and delayed release tablets. Thermal …

Iron-Containing Nanoparticles For The Treatment Of Chrionic Biofilm Infections In Cystic Fibrosis, Leisha M. A. Martin

Nanoscience and Microsystems ETDs

Cystic fibrosis (CF) is the most common genetic disease resulting in the morbidity and mortality of Caucasian children and adults worldwide. Due to a genetic mutation resulting in malfunction of the Cystic Fibrosis Transmembrane Conductance Regulator (CFTR) protein, CF patients produce highly viscous mucus in their respiratory tract. This leads to impairment of the mucociliary clearance of inhaled microbes. In addition to reduced microbial clearance, anoxic environmental conditions in the lungs promote biofilm-mode growth of the pathogenic bacterial species Pseudomonas aeruginosa. Chronic infections of P. aeruginosa begin in early childhood and typically persist until respiratory failure and death result. The …

Towards The Rational Design And Application Of Polymers For Gene Therapy: Internalization And Intracellular Fate, Landon Alexander Mott

Theses and Dissertations--Chemical and Materials Engineering

Gene therapy is an approach for the treatment of acquired cancers, infectious disease, degenerative disease, and inherited genetic indications. Developments in the fields of immunotherapies and CRISPR/Cas9 genome editing are revitalizing the efforts to move gene therapy to the forefront of modern medicine. However, slow progress and poor clinical outcomes have plagued the field due to regulatory and safety concerns associated with the flagship delivery vector, the recombinant virus. Immunogenicity and poor transduction in certain cell types severely limits the utility of viruses as a delivery agent of nucleic acids. As a result, significant efforts are being made to develop …

Radical Social Ecology As Deep Pragmatism: A Call To The Abolition Of Systemic Dissonance And The Minimization Of Entropic Chaos, Arielle Brender

Student Theses 2015-Present

This paper aims to shed light on the dissonance caused by the superimposition of Dominant Human Systems on Natural Systems. I highlight the synthetic nature of Dominant Human Systems as egoic and linguistic phenomenon manufactured by a mere portion of the human population, which renders them inherently oppressive unto peoples and landscapes whose wisdom were barred from the design process. In pursuing a radical pragmatic approach to mending the simultaneous oppression and destruction of the human being and the earth, I highlight the necessity of minimizing entropic chaos caused by excess energy expenditure, an essential feature of systems that aim …

Design And Analysis Of Curcumin Conjugated Poly(Beta-Amino Ester) Networks For Controlled Release In Oxidative Stress Environments, Carolyn T. Jordan

Theses and Dissertations--Chemical and Materials Engineering

Oxidative stress, the imbalance of free radical generation with antioxidant defenses, leads to cellular inflammation, apoptosis and cell death. This compromised environment results in debilitating diseases, such as oral mucositis (OM), atherosclerosis, and ischemia/reperfusion injury. Antioxidant therapeutics has been a proposed strategy to ameliorate these imbalances and maintain homeostatic environments. However, the success of these approaches, specifically curcumin, has been limited due to characteristics such as hydrophobicity and high reactivity when released as bolus doses to contest to oxidative stress induced diseases. The development of a controlled release system to aid in protection of the antioxidant capacity of curcumin, as …

The Development Of Microfluidic Devices For The Production Of Safe And Effective Non-Viral Gene Delivery Vectors, Jason Matthew Absher

Theses and Dissertations--Chemical and Materials Engineering

Including inherited genetic diseases, like lipoprotein lipase deficiency, and acquired diseases, such as cancer and HIV, gene therapy has the potential to treat or cure afflicted people by driving an affected cell to produce a therapeutic protein. Using primarily viral vectors, gene therapies are involved in a number of ongoing clinical trials and have already been approved by multiple international regulatory drug administrations for several diseases. However, viral vectors suffer from serious disadvantages including poor transduction of many cell types, immunogenicity, direct tissue toxicity and lack of targetability. Non-viral polymeric gene delivery vectors (polyplexes) provide an alternative solution but are …

Computational And Experimental Determination Of The Mixing Efficiency Of A Microfluidic Serpentine Micromixer, Siril Arockiam

Theses

In microfluidics, efficiency and mixing time are the greatest disadvantages. These parameters hinder the application of microfluidic devices for biochemical and immunological assays. However, once these disadvantages have been overcome by optimizing the parameters of the microfluidic device, it becomes the important analytical tool. In this experiment, various designs of microfluidic devices have been both simulated using COMSOL software, and experimentally verified to obtain the optimized parameter such as depth and velocity for better mixing efficiency. The COMSOL model has been validated by comparing the results with fluorescent images data of the experiment. The microfluidic device is built with Adhesive …

Comparative Analysis Of The Dissolution Performance Of Aspirin Tablets In The Usp Apparatus 2 And In A Minivessel Dissolution System, Annmarie C. Walker

Theses

Dissolution testing is a critical component of quality control procedures in the pharmaceutical industry in order to ensure that the final solid dosage forms have consistent dissolution properties. Dissolution tests are also routinely conducted to evaluate the in-vitro performance of solid dosage forms during pharmaceutical development, to aid in the behavior of formulations, and to optimize drug release from dosage forms.

The use of compendial dissolution test apparatus and techniques, such as the USP 2 (Paddle), to characterize the dissolution performance of oral drug delivery system is an established area of pharmaceutical science. However, this method is not always appropriate, …

Power Dissipation And Power Correlations For A Retreatblade Impeller Under Different Baffling Conditions, Chadakarn Sirasitthichoke

Theses

Glass-lined stirred reactors and tanks are commonly used in the pharmaceutical industry because of their corrosion resistance, ease of cleanliness and minimization of product contamination. Most industrial glass-lined tank reactors are provided with a torispherical tank bottom and a retreat curve impeller with low impeller clearance from the vessel bottom. The power, P, dissipated by the impeller is a critical process parameter to mixing processes to achieve the desired mixing effect, especially since the power per unit volume, P/V, directly controls mass transfer processes and other mixing phenomena. However, little information has been published about the power dissipation and the …

Novel Experimental Method For The Determination Of The Minimum Agitation Speed For Solids Suspension In Flat-Bottomed Stirred Tank Reactors, Shriarjun Shastry

Theses

Knowledge of the minimum agitation speed, Njs, required to suspend finely divided solids in vessels stirred by an impeller is a critical parameter to properly operate industrial tanks in a large number of industrial operations. The most common experimental approach to measure N_js is that of Zwietering’s (Chem. Eng. Sci., 1958, 8, 244-253), consisting of visually inspecting the tank bottom and visually determining the impeller agitation speed at which the solids are observed to rest on the tank bottom for no more than 1-2 seconds before being swept away. This method is quite reliable, but a method …

Investigation Of Polymeric Composites For Controlled Drug Release, Hsi-Wei Yeh

Theses and Dissertations

The Electrospray (ES) technique is a promising particle generation method for drug delivery due to its capabilities of producing monodisperse PLGA composite particles with unique configurations and high drug encapsulation efficiency. In the dissertation work, the coaxial dual capillary ES was used to generate drug-loaded core-shell PLGA particles to study the effects of particle filling materials, drug loading locations and particle shell thicknesses on the resultant in vitro release behaviors of the hydrophilic and/ or hydrophobic model drugs. Through release profile characterization of drug-loaded PLGA particles (particle size: 400 nm and 1 μm), it was confirmed that the co-encapsulation of …

Mechanism Of Interaction Of Peptide Modified Nanoparticles With Porphyromonas Gingivalis., Ankita Jain

Electronic Theses and Dissertations

Studies suggest that P. gingivalis functions as a keystone pathogen and interacts with primary colonizers in the supragingival biofilm such as S. gordonii. This interaction contributes to the initial colonization of the oral cavity by P. gingivalis and thus represents a potential target for therapeutic intervention. We have identified a peptide (BAR) derived from the streptococcal SspB protein that functions to inhibit P. gingivalis adherence to S. gordonii. In addition, we showed that nanoparticles (NPs) functionalized with BAR inhibit this interaction more potently than free soluble peptide, possibly by promoting interaction with P. gingivalis at higher valency than …

Calcium Phosphate As A Key Material For Socially Responsible Tissue Engineering, Vuk Uskoković, Victoria M. Wu

Pharmacy Faculty Articles and Research

Socially responsible technologies are designed while taking into consideration the socioeconomic, geopolitical and environmental limitations of regions in which they will be implemented. In the medical context, this involves making therapeutic platforms more accessible and affordable to patients in poor regions of the world wherein a given disease is endemic. This often necessitates going against the reigning trend of making therapeutic nanoparticles ever more structurally complex and expensive. However, studies aimed at simplifying materials and formulations while maintaining the functionality and therapeutic response of their more complex counterparts seldom provoke a significant interest in the scientific community. In this review …

Hiv Vaccines: Progress, Limitations And A Crispr/Cas9 Vaccine, Omar A. Garcia Martinez

Biology: Student Scholarship & Creative Works

ABSTRACT: The HIV-1 pandemic continues to thrive due to ineffective HIV-1 vaccines. Historically, the world’s most infectious diseases, such as polio and smallpox, have been eradicated or have come close to eradication due to the advent of effective vaccines. Highly active antiretroviral therapy is able to delay the onset of AIDS but can neither rid the body of HIV-1 proviral DNA nor prevent further transmission. A prophylactic vaccine that prevents the various mechanisms HIV-1 has to evade and attack our immune system is needed to end the HIV-1 pandemic. Recent advances in engineered nuclease systems, like the CRISPR/Cas9 system, have …

Computational And Experimental Determination Of The Hydrodynamics In A Stirred Unbaffled Vessel Provided With Angle-Mounted Axial Impellers, Ji Ma

Theses

In most industrial applications, stirred tanks and reactors are typically provided with baffles to improve their mixing characteristics. However, in a number of pharmaceutical production facilities unbaffled vessels are commonly used. The absence of baffles is preferred in such cases because it reduces the potential for contamination and makes cleaning the vessel between batches easier. However, the lack of baffles also has a negative impact on the system’s hydrodynamics since it often results in poor mixing of the batch, especially if the impeller is centrally placed, since the liquid in such a system is subject to a strong tangential flow, …