Open Access. Powered by Scholars. Published by Universities.®

Systems Science Commons™

Open Access. Powered by Scholars. Published by Universities.®

Artificial Intelligence and Robotics

Institution
Keyword
Publication Year
Publication
Publication Type

Articles 3901 - 3930 of 3940

Full-Text Articles in Systems Science

Aerodynamic Simulation Of Multi-Dof Flapping-Wing Air Vehicle Of Bird-Like Based On Xflow Software, Yonggang Yang, Hanping Su Jun 2018

Aerodynamic Simulation Of Multi-Dof Flapping-Wing Air Vehicle Of Bird-Like Based On Xflow Software, Yonggang Yang, Hanping Su

Journal of System Simulation

Abstract: The aerodynamic characteristics analysis of flapping-wing is of great significance to the design, manufacturing and control of the aircraft. In this paper, a simple motion model of multiple-Degrees-of- Freedom (multi-DOF) of “swing-torsion-bending and folding” is established by analyzing the flight characteristics of bird-like flapping wing. The flapping-wing air vehicle of multi-DOF is numerically simulated in the case of unsteady flow at low Reynolds number by XFlow software. The effects of flapping wing shape, frequency and inflow on surrounding air are analyzed. The simulation results provide theory and technique supports for the flapping-wing air vehicle'research and development.


Simulation Analysis Of Magnetic Field Effect In Induction Heating Coil Of Porous Silicon Core Furnace, Jingang Li, Gaoyuan Liu Jun 2018

Simulation Analysis Of Magnetic Field Effect In Induction Heating Coil Of Porous Silicon Core Furnace, Jingang Li, Gaoyuan Liu

Journal of System Simulation

Abstract: A new technology of porous coil disposable drawing a plurality of single crystal silicon rod can solve the problem of low efficiency and high cost of zone melting method of single induction heating coil in drawing monocrystalline silicon. However,the missing of the theoretical research and mature technology leads to different sizes of monocrystalline silicon rods. According to electromagnetic theory,Some characterisitics of the porous coil are studied,including magnetic field model,operating principle,magnetic field distribution.To prove the mechanism of the technology, a mathematical model of the porous coil is constructed based on Matlab and Ansys software. The magnetic flux density distribution …


Synthesizing Rotational Human Motion With Physical Reality, Wei Yi, Shihong Xia Jun 2018

Synthesizing Rotational Human Motion With Physical Reality, Wei Yi, Shihong Xia

Journal of System Simulation

Abstract: Both keyframes and their timings play an important role in synthesizing physically realistic human motion. However, physically plausible timings are hard to set by manual. By combing keyframes and the physics-based optimization, a new method is proposed to solve physically plausible timings of given keyframes. Firstly, the keyframes and the initial value of the timings of keyframes are set through a graphical user interface. Secondly, the physically plausible timings of keyframes are obtained by optimizing a small-size nonlinear optimization model. Finally, the rotational human motion is synthesized by the keyframes and the computed timings of keyframes. Experiments are performed …


Research And Simulation Of Roots-Type Power Machine Control System Based On Fuzzy Pid, Yan-Jun Xiao, Yonggeng Wang, Jing Ran, Feng Hua, Yongcong Li Jun 2018

Research And Simulation Of Roots-Type Power Machine Control System Based On Fuzzy Pid, Yan-Jun Xiao, Yonggeng Wang, Jing Ran, Feng Hua, Yongcong Li

Journal of System Simulation

Abstract: For utilizing the domestic low grade waste heat resources, a Roots-type steam engine is developed. To make the roots engine stably output electric energy, an efficient constant power control system needs to be designed. The controlled object characteristics of the roots engine are analyzed; the modeling of the control system is established; and on this basis the fuzzy control algorithm is introduced. The fuzzy adaptive PID controller for the roots power machine constant power output is designed and the related MATLAB simulation is carried out. The results show that the Roots type steam power machine with fuzzy adaptive PID …


Modeling And Simulation Of Islanded System With Wind And Storage Power, Ye Peng, Yaoning Hu, Minghui Sun Jun 2018

Modeling And Simulation Of Islanded System With Wind And Storage Power, Ye Peng, Yaoning Hu, Minghui Sun

Journal of System Simulation

Abstract: With the consumption of primary energy and the severe environmental issues, the new energy power generation has been attracted much attention by scholars at home and abroad. As an important application form of new energy power generation, the operation of the islanded system with wind and storage power has a huge potential for future development. For the islanded system with wind and storage power, each mathematical model and the mathematical model of control system were established. In the electromagnetic transient simulation platform PSCAD, the corresponding electromagnetic transient simulation model was built based on the established mathematical model. The dynamic …


Application Of Finite Element Modification And Model Order Reduction In Temperature Control System, Xiaona Wang, Ye Ying, Qiyue Xu, Sebastian Marin, Michael Hohmann, Shuliang Ye Jun 2018

Application Of Finite Element Modification And Model Order Reduction In Temperature Control System, Xiaona Wang, Ye Ying, Qiyue Xu, Sebastian Marin, Michael Hohmann, Shuliang Ye

Journal of System Simulation

Abstract: A modification and model order reduction (MOR) method based on finite element model is proposed, which can be used in the design of simulation platform of furnace temperature control system. Based on the step response test of furnace behavior and the modification of finite element model's key parameters in ANSYS, the model reflecting the actual characteristics of furnace is obtained. Based on the software tool called mor4ansys using Krylo subspace reduction method, the state space model is obtained. The MATLAB/Simulink simulation platform based on state space model is built for more research work on furnace temperature control design. Based …


Optimal Deployment Of Distant Support Jamming Formation Based On Directional Crossover Genetic Algorithm, Jinliang Luo, Jiacai Jin, Wang Lei, Ding Feng Jun 2018

Optimal Deployment Of Distant Support Jamming Formation Based On Directional Crossover Genetic Algorithm, Jinliang Luo, Jiacai Jin, Wang Lei, Ding Feng

Journal of System Simulation

Abstract: Optimal deployment of distant support jamming formation is studied for improving penetration capability of air assault group in air offensive operation. The total detection threats of penetration route are chosen as the performance indicator, and the optimal deployment mode of distant support jamming formation is built. The closed region detection method is used to compute fitness value. The difficult problem of computing detection coverage of radar net under jamming condition is solved by using traditional geometry analytic method. A selective directional crossover genetic algorithm is designed to compute the optimal deployment mode. The simulation results show that the algorithm …


Online Synthesis Incremental Data Streams Classification Algorithm, Sanmin Liu, Yuxia Liu Jun 2018

Online Synthesis Incremental Data Streams Classification Algorithm, Sanmin Liu, Yuxia Liu

Journal of System Simulation

Abstract: Online learning is the effective way to solve the sample's non-recurrence in data streams classification, and how to deal with the problem of sample deficiency is the critical point for improving online learning efficiency. According to the mean square error decomposition theory of the model's parameter estimation and the idea of cluster, the new samples are constructed by linear synthesis with the class center and the sample, which can improve the distribution information of sample and reduce the lower bound of parameter value. The online incremental learning is executed and the class center point is continuously updated. Through theory …


Train Energy Saving Operation Based On Simulated Annealing Algorithm, Liu Wei, Jiaxuan Xu, Peipei Wang, Ruilong Liu, Jingkun Tang Jun 2018

Train Energy Saving Operation Based On Simulated Annealing Algorithm, Liu Wei, Jiaxuan Xu, Peipei Wang, Ruilong Liu, Jingkun Tang

Journal of System Simulation

Abstract: For the timing and energy saving algorithm of urban railway, the train operation iterative process was analyzed by dividing the operation intervals to meet the requirements of the subway trains timing energy saving operation. The differentiation was adopted to establish the train operation iterative model, and as a result the timing energy saving problem was transformed into the solution of train output using coefficient sequence. An optimization solving method based on simulated annealing algorithm was proposed and the algorithm was implemented using MFC program. Three intervals of Shanghai Metro Line 3 were selected and the solution of the train …


New Phase-Lock Method For Tracking Low-Voltage Ride-Through On Photovoltaic Inverters, Bobo Li, Shouzhi Li, Yanxiao Zhang Jun 2018

New Phase-Lock Method For Tracking Low-Voltage Ride-Through On Photovoltaic Inverters, Bobo Li, Shouzhi Li, Yanxiao Zhang

Journal of System Simulation

Abstract: The low-voltage ride-through in photovoltaic power generation is a key problem for photovoltaic inverters connected to grid. Aiming at the frequency- and phase-locking of low-voltage ride-through on the photovoltaic inverter during asymmetric fault on the grid and using positive and negative sequence separation, a dual second-order generalized integral frequency- and phase-locking algorithm (DSOGI-FLL-PLL) is proposed, and a simple FLL is used so that positive and negative sequence separation can be performed for various frequencies. The conventional phase-lock- loop (PLL) is also used to capture the grid-side voltage, which greatly reduces response time and error of PLL during asymmetric faults …


Detail-Preserving Shape Deformation In Sph Fluid Control, Feng Gang, Shiguang Liu Jun 2018

Detail-Preserving Shape Deformation In Sph Fluid Control, Feng Gang, Shiguang Liu

Journal of System Simulation

Abstract: It remains a challenging problem to drive particles-based fluid simulation to match target shape and deform fluid shape between different models smoothly in fluid control, especially when the natural fluid motion should be preserved. To achieve the desired behavior, the models are divided into source objects and target objects, and the control particles are generated from them. According to a space point correspondence between source control particles and target control particles, the control particles' movements are calculated which drive fluid to match different models. The control energy from source control particles is transferred to target control particles so as …


Cooperative Target Recognition With Multiple Features Judgment, Guopeng Sun, Xiangyang Hao, Zhenjie Zhang, Pengrui Yan Jun 2018

Cooperative Target Recognition With Multiple Features Judgment, Guopeng Sun, Xiangyang Hao, Zhenjie Zhang, Pengrui Yan

Journal of System Simulation

Abstract: For solving cooperative target recognition problem in visual navigation, a fast and accurate algorithm based on progressive judgment of multiple features is proposed. The image is processed and judged by multiple features including image contours, Hu moment invariants and FAST corners. The non-target areas are eliminated and the real targets are obtained. In the process, algorithm is improved and some accelerated strategies are adopted to meet real-time requirements. Experiments show that the proposed algorithm can identify cooperative target robustly and adaptively with different distances, different angles and environment disturbance.


Route Planning For Vessel Based On Dynamic Complexity Map, Zhe Du, Yuanqiao Wen, Huang Liang, Chunhui Zhou, Changshi Xiao Jun 2018

Route Planning For Vessel Based On Dynamic Complexity Map, Zhe Du, Yuanqiao Wen, Huang Liang, Chunhui Zhou, Changshi Xiao

Journal of System Simulation

Abstract: Aiming at multiple mobile objects in complex navigation environment, a route planning method based on the dynamic complexity map is proposed. According to the theory of complexity measurement, a dynamic complexity map is established. By taking advantage of the idea of A * algorithm, the complexity value is taken as an actual cost and the Euclidean Distance from current point to the target is taken as a heuristic costs. Considering the ship dimensions, the channel boundary constraint function is added. The experimental results show that on the premises of satisfying the constraint of ship dimensions, the planned route …


Performance Analysis And Research Of Shark Fin Structure Based On Simulation, Liu Shuang, Lü Chao, Rao Yong, Shiming Wang Jun 2018

Performance Analysis And Research Of Shark Fin Structure Based On Simulation, Liu Shuang, Lü Chao, Rao Yong, Shiming Wang

Journal of System Simulation

Abstract: The shark fin, the pectoral fin and the dorsal fin were studied based on the numerical simulation method; the pressure field, velocity field and flow field of the specimen structure were analyzed with three different flow velocities; the analysis and comparison of the mechanical properties of caudal fin, dorsal fin and pectoral fin were presented. The results show that the setting width of the tail fin can be set to 0.5 ~ 4.8 meters so as to improve the anti-karman vortex effect; the width of the tail fins should be relatively narrow in order to guarantee the base of …


Effect Of Interfacial Curvature On Drag Reduction Of Superhydrophobic Microchannels, Chunxi Li, Zhang Shuo, Xuemin Ye Jun 2018

Effect Of Interfacial Curvature On Drag Reduction Of Superhydrophobic Microchannels, Chunxi Li, Zhang Shuo, Xuemin Ye

Journal of System Simulation

Abstract: The two-dimensional fluid flow in superhydrophobic microchannels with transverse grooves was numerically simulated with Fluent to investigate the impact of the liquid-gas interface curvature on the effective slip behavior in the laminar regime. The effects of shear-free fraction, normalized periodic cell length and Reynolds number on the normalized slip length and pressure drop reduction are also examined. The results show that as protrusion angle increases, the normalized slip length and pressure drop reduction exhibit with single-hump variations. When θ=θopt, increments in the normalized slip length and pressure drop reduction tend to be greater as shear-free …


Vascular Image Enhancement Using Steerable Filters, Yiren Wang, Guoqing Deng, Yingwei Xia, Zhang Long, Liu Yong, Zhang Wen Jun 2018

Vascular Image Enhancement Using Steerable Filters, Yiren Wang, Guoqing Deng, Yingwei Xia, Zhang Long, Liu Yong, Zhang Wen

Journal of System Simulation

Abstract: Based on the weakness of traditional image enhancement algorithms, an enhancement algorithm with steerable filter is put forward, which uses computer vision system as hardware platform. A steerable filter is applied for taking vein information in different directions. The wavelet transform is used to fuse image for high frequency information on vein. The nonlinear unsharp masking enhancement algorithm is used to escalate vein image. Experiment results show that the new algorithm can effectively suppress noise, reduce information loss and achieve better enhancement.


Key Technology Of Oil Spill Visualization At Sea Surface, Changjun Zou, Yin Yong, Xiuwen Liu, Feifei Wan Jun 2018

Key Technology Of Oil Spill Visualization At Sea Surface, Changjun Zou, Yin Yong, Xiuwen Liu, Feifei Wan

Journal of System Simulation

Abstract: An intensive study is made on the visualization method and oil equipment interaction. To solve the blind area problem and to realize the interactive of oil film, the following methods are proposed: new visualization method based on texture projection; modeling technique of oil boom based on mass-spring model; dynamic interaction method between oil boom and oil film texture based on polygon clipping. Real-time oil spill visualization at sea is implemented on GPU, the test results show the correctness and reliability of the methods.


3d Visual Effects Assessment Based On Comprehensive Weight, Yanyang Zeng, Zhenjing Feng Jun 2018

3d Visual Effects Assessment Based On Comprehensive Weight, Yanyang Zeng, Zhenjing Feng

Journal of System Simulation

Abstract: There are various indicators for assessing the 3D visual effects, while the general weight of each index needs pre-determined coefficients individually, for which either the expert knowledge model or theoretical model used has advantages and disadvantages empowerment. Based on expert knowledge and theoretical models, the comprehensive weight method, optimization model, and direct solution of the index weight vectors have subjective and objective information. Experimental results show that the method of determining the weight vector different sort results of the assessment is also slightly different. Integrated weighting method to determine the weight of each index and the corresponding results of …


Svm Prediction Of Performance Degradation Of Rolling Bearings With Fusion Of Kpca And Information Granulation, Jiya Xu, Wang Yan, Dahu Yan, Zhicheng Ji Jun 2018

Svm Prediction Of Performance Degradation Of Rolling Bearings With Fusion Of Kpca And Information Granulation, Jiya Xu, Wang Yan, Dahu Yan, Zhicheng Ji

Journal of System Simulation

Abstract: To effectively predict the performance degradation index and its fluctuation ranges of the rolling bearing, a prediction method based on kernel principal component analysis algorithm and fuzzy information granulation using support vector machine is proposed. The kernel principal component analysis is utilized to preprocess the data to acquire the main feature vector, construct T2 and SPE statistics, and to analyze its trend. The statistical information is used as the performance degradation index. Theory of fuzzy information granulation is used to granulate the performance degradation index and extract the useful information. The granulated data are put to the support …


Channel Capacity Analysis Of Diffusion-Based Molecular Communication Model, Cheng Zhen, Lin Fei, Yanjing Lei, Huiting Zhao Jun 2018

Channel Capacity Analysis Of Diffusion-Based Molecular Communication Model, Cheng Zhen, Lin Fei, Yanjing Lei, Huiting Zhao

Journal of System Simulation

Abstract: At present, the research on the channel capacity of diffusion-based molecular communication (DBMC) model is very limited. In the slotted point to point communication scenario, considering all the inter-symbol interferences from all the previous time slots, the optimal decisive threshold is provided by using the criterion of minimum average error probability in the detection process for the receiver nanomachine, and the mutual information expression is derived in DBMC model. Thus channel capacity of this model is analyzed. The simulation results show that the different parameters have important influences on the channel capacity. Compared to the existed point to point …


Study And Performance Analysis Of Bar Tsv Structure, Zhensong Li, Miao Min Jun 2018

Study And Performance Analysis Of Bar Tsv Structure, Zhensong Li, Miao Min

Journal of System Simulation

Abstract: A bar-through silicon via (B-TSV) structure is studied, and its 3D model and equivalent circuit model are proposed. The effects of design parameters formulas are investigated and concluded by a 3D electromagnetic solver. Performance comparison between B-TSV and the conventional cylindrical one is provided by simulation under the Ground-Signal-Ground configuration. The B-TSV structures are designed and fabricated in a printed circuit board (PCB) and the measured performance is given. Test results confirm that B-TSV has better performance than traditional one.


Simulation Of Hot Event Propagation Based On Game Theory And Sirs, Dezhi Wei, Fuji Chen, Lina Lin Jun 2018

Simulation Of Hot Event Propagation Based On Game Theory And Sirs, Dezhi Wei, Fuji Chen, Lina Lin

Journal of System Simulation

Abstract: The hot events of the internet public opinion spread fast and have great influence. It has become a topic of concern for netizens and governments. The spread of hot spots on the internet is similar to the dynamics of infectious diseases, so a traditional SIRS epidemic model based improved model is proposed, combining the analysis of the game theory. The evolutionary game model of infectious body and immune body is constructed, the equilibrium point of the game is found and the law of the spread of hot spots is obtained. The model is verified by experiment through the …


Batik Dying Simulation Based On Diffusion, Yangtao Yu, Zhenlu Yu, Wenhua Qian, Keshi Zhang, Xu Dan Jun 2018

Batik Dying Simulation Based On Diffusion, Yangtao Yu, Zhenlu Yu, Wenhua Qian, Keshi Zhang, Xu Dan

Journal of System Simulation

Abstract: This paper presents a three-layer model which is composed of wax layer, warp layer and weft layer. The wax layer wraps warp and weft layer which overlap together. According to Fick's second law and considering dye's diffusion, absorption and supply, a differential equation is built to describe diffusion process and this equation is discretized. Porosity, tortuosity and neighboring coefficient are used in the equation. Rectangular weave is simulated by using ellipse-distance model and blurred in HSV color space. Simulation shows that the satisfactory visual effect which closes to real batik cloth is acquired by the method and the algorithm …


Matlab Simulation For Electrically Excited Synchronous Motors With Low Switching Frequency, Qingqing Yuan, Bin Song, Yang Na Jun 2018

Matlab Simulation For Electrically Excited Synchronous Motors With Low Switching Frequency, Qingqing Yuan, Bin Song, Yang Na

Journal of System Simulation

Abstract: Switch loss is one of the main energy consumption of the high power transmission system, while the low switching frequency approach is an effective way to improve above issues. However, it will result in a severe harmonic distortion and further affect the control performance. A selective harmonic elimination pulse width modulation (SHEPWM) strategy has been used to ensure the low energy consumption operation of a diode clamped three-level converter whose load is a high power electrically excited synchronous motors (EESM). For the SHEPWM's characteristics of specific harmonic elimination and harmonic energy moving on the high order, a simple high-pass …


Simulation And Optimization On Electrodynamic Repulsion Force Of Contact System In Circuit Breaker With Oil Dashpot, Yanhua Qiao, Xiuping Su, Tianying Dong Jun 2018

Simulation And Optimization On Electrodynamic Repulsion Force Of Contact System In Circuit Breaker With Oil Dashpot, Yanhua Qiao, Xiuping Su, Tianying Dong

Journal of System Simulation

Abstract: A 3D finite element model for contact system of circuit breaker with oil dashpot is established. Two electrodynamic repulsion forces, the Holm force between contacts and the Lorentz force between the conductor arms, are analyzed. The current density distribution, magnetic intensity distribution and the forces of the contact and contact arm are obtained. Compared with the theoretical value, it shows that it is feasible to use this method to solve electrodynamic repulsion force. The main factors that influence the Holm force are analyzed. The simulation results show the changes of Holm force with different surface contact coefficient, contact pressure …


Parallel Design And Load Balance Of Openmp Based Warfighting Simulation, Wang Xiao, Yaqi Liu, Yuben Tao Jun 2018

Parallel Design And Load Balance Of Openmp Based Warfighting Simulation, Wang Xiao, Yaqi Liu, Yuben Tao

Journal of System Simulation

Abstract: Parallel simulation is a main trend of large scale and high precision war fighting simulation (WS). However, currently there is no unified framework to design a parallel WS and no effective method to load balance of it. Based on the parallel agent theory, an OpenMP based parallel WS design framework (PWSF) is proposed. To solve the problem of the complex simulation load distribution resulted from the diversity of entities' models and the position independence of the interactions, a load balance method based on METIS multilevel graph partition tool is suggested. Based on the improved PHOLD test model, experiments on …


Modeling And Simulation Of Networked Control Systems Based On Improved Bp Network, Shifeng Li, Zhanzhi Qiu, Liping Fan, Lina Zhao Jun 2018

Modeling And Simulation Of Networked Control Systems Based On Improved Bp Network, Shifeng Li, Zhanzhi Qiu, Liping Fan, Lina Zhao

Journal of System Simulation

Abstract: In the circumstance where both the delay model and the controlled object model were unknown in networked control systems, a class of networked predictive control systems based on improved BP network were studied. For the problem of obtaining the hidden layer nodes number of BP network, a rapid calculation method was proposed. For the problem of avoiding local optimum of BP network, a hybrid learning method was proposed. A off-line BP network model was proposed for coping with the problem of the delay prediction based on the above algorithms. For the problem of the linear …


Algorithm For Tracking Position And Orientation Of Drug Delivery Capsules In Gastrointestinal Tract, Xudong Guo, Zhengping Lu, Qinfen Jiang, Shuyi Wang, Haipo Cui Jun 2018

Algorithm For Tracking Position And Orientation Of Drug Delivery Capsules In Gastrointestinal Tract, Xudong Guo, Zhengping Lu, Qinfen Jiang, Shuyi Wang, Haipo Cui

Journal of System Simulation

Abstract: To realize an accurate releasing by a drug-delivery capsule in the gastrointestinal tract, a method of magnetic vector detection with angle sensing has been presented to track the capsule in real time; and a prototype of the tracking system has been developed. Based on the fundamentals of spatial distribution of magnetic vector fields, a nonlinear model of tracking is established. An improved artificial bee colony algorithm is studied to solve the magnetic inverse problem. In the improved algorithm, a chaos operator is used to generate an initial population and a sort selection is used to prevent premature convergence. …


Design Of Mini Folding Electric Scooter Based On Relative Attitude Angle Control, Lijun Jiang, Zhanghong Wu, Shaohui Pan, Zhelin Li, Zhiyong Xiong, Yongqing Fu Jun 2018

Design Of Mini Folding Electric Scooter Based On Relative Attitude Angle Control, Lijun Jiang, Zhanghong Wu, Shaohui Pan, Zhelin Li, Zhiyong Xiong, Yongqing Fu

Journal of System Simulation

Abstract: To help people move conveniently after getting off the public transport in the city, anew mini electric scooter design is proposed. This new scooter uses a smart mobile phone to receive driving intention and owns more efficient, convenient and space-saving folding pattern. A kinematics model of scooter is set up and discussed. A control strategy based on the relative attitude angle, an attitude sensor data consolidation approach based on the complementary filter, a solution to the Euler angle jumping and an estimate method to the wrong operation are proposed. The design is made into a prototype based on …


Dynamic Blind Source Separation Method Of Bearing Fault Diagnosis Based On Ga-Aw-Pso, Tianqi Zhang, Baoze Ma, Xingzi Qiang, Shengrong Quan Jun 2018

Dynamic Blind Source Separation Method Of Bearing Fault Diagnosis Based On Ga-Aw-Pso, Tianqi Zhang, Baoze Ma, Xingzi Qiang, Shengrong Quan

Journal of System Simulation

Abstract: The adaptive particle swarm optimization based on genetic mechanism (GA-AW-PSO) is proposed, aiming at blind source separation for dynamic hybrid bearing signals. The negentropy of separated signal is regarded as an objective function. The inertia weight is adjusted adaptively to reduce the invalid iterations according to the fitness difference. The introduction of genetic mechanism can increase diversity and is helpful for dynamic signal processing. The parameterized representation of orthogonal matrices can reduce the complexity of the algorithm. The simulation results show that the proposed method is superior to traditional blind source separation for the dynamic mechanical hybrid analog signal. …