Operations Research, Systems Engineering and Industrial Engineering Commons^™

Cooperative Guidance Method Considering Impact Time And Area Sealing, Zheng Guo, Guofei Li, Hua Xiong, Yunjie Wu

Journal of System Simulation

Abstract: To address the problem of multi-vehicle cooperative strike against maneuvering targets, a cooperative guidance method considering impact time control and terminal area sealing was proposed. The distributed disturbance observer was utilized to estimate target maneuvers. Based on the consensus errors of the impact time, the cooperative guidance law in the line-of-sight direction was proposed to achieve simultaneous hits on targets at a specified time. By considering the motion states of targets, the instructions of the terminal area sealing were designed to construct the sliding mode surface and design the line-of-sight guidance law, so as to ensure the convergence of …

Blockchain-Based Solution To Enhance Carbon Footprint Traceability, Accounting, And Offsetting In The Passenger Aviation Industry, Pratyush Kumar Patro, Raja Jayaraman, Adolf Acquaye, Khaled Salah, Ahmad Musamih

Industrial Engineering: Faculty & Staff Publications

The aviation industry's carbon emissions are forecast to rise to 22% by 2050, posing a significant challenge to the goal of achieving Net Zero Emissions by the same year. Regardless of the structural or agentic strategies implemented to reduce these emissions, ensuring effective traceability of emissions in airline operations is crucial, as it enables the development of effective mitigation measures. Existing systems fall short of effectively providing end-to-end traceability of emissions within an effective carbon accounting framework. Indirect emissions and the complexities associated with emissions tracking throughout the extended aviation sector also exacerbate carbon accounting and offsetting difficulties. In this …

Exploring The Effectiveness Of Virtual Reality Learning Through Use Of Visual Eye-Tracking Analytics (Veta) And Biological Measurements, Mckinley Anne Sherman

Master's Theses

Virtual Reality (VR) offers an immersive and interactive platform for experiential learning. The purpose of this thesis was to evaluate the relationship between physiological responses and cognitive workload within a VR learning environment and to explore VR as an effective instructional tool. This research compared participant engagement, stress, and learning performance within a 6th-grade science module developed in VR by incorporating biometric data collected via Polar H10 heart rate monitor and Varjo Areo VR headset eye-tracking. Thirty-three participants completed a pre-lesson demographic survey, post-lesson survey, VR sickness questionnaire, and the NASA Task Load Index (NASA-TLX). While completing the lesson, the …

User Interface And Watchstation Improvements Required For Multi-Vehicle Usv Operations, Val Schmidt, Joshua Bergeron

Faculty Publications

In October 2024, the University of New Hampshire and NOAA’s Uncrewed Systems Office embarked on a mapping mission in the Gulf of Maine, simultaneously operating two DriX Un-crewed Surface Vehicles. Goals of the project were focused on testing hypotheses related to concepts of operation, including the safety of operations, cognitive loading of operators, management of vehicle endurance, vehicle logistics, maintenance and field support, refueling and a host of others.

Design And Implementation Of Home Energy Management System (Hems) In Smart Grid Through Demand Side Management (Dsm), Nirmala Jegadeesan Ms

Theses and Dissertations

The rising global energy demand, combined with environmental concerns and the depletion of conventional energy sources, has driven the need for the development of smarter and more sustainable energy systems. This research focuses on Home Energy Management System (HEMS) using soft computing techniques to optimize load scheduling, enhance energy efficiency, and integrate Renewable Energy Sources (RES) such as solar and battery storage. The primary goal is to balance supply and demand, reduce peak loads, and minimize energy costs while ensuring consumer comfort and system reliability.

Smart grids provide enhanced capabilities compared to conventional grids by enabling bidirectional flows of energy …

Integrating Augmented Reality (Ar) Into Industrial Engineering Education: Supporting Assembly Line Operations In Advanced Manufacturing Laboratory, Fidan Abdullayeva

LSU Master's Theses

The rapid development of innovative technology underscores the importance of preparing students to meet industry expectations. This study aims to design, develop, and integrate Augmented Reality (AR) applications into Industrial Engineering (IE) education, specifically within LSU’s IE 2400 System and Work Methods course. The research incorporates technology like Microsoft HoloLens 2 into laboratory exercises. It seeks to enhance students’ comprehension and visualization of complex industrial systems and concepts, while familiarizing them with AR technology’s potential in the manufacturing industry. The AR application features functionalities tailored to support specific roles. These include AR-enhanced assembly manuals for Assemblers and quality inspection tools …

Modern Significance And Development Trends In The Production Of Vegetable Oils, Umidjon Ruziev, F.O. Qosimov, M.K. Shodiev

Chemical Technology, Control and Management

This article provides a comprehensive analytical review of the current state of the global vegetable oil production market. It describes the diversity of raw materials supplied, which includes both traditional and emerging fat sources. The paper also describes the technological stages of production, emphasizing modern innovations that contribute to more efficient, high-quality, and safe production. The article also covers global trends by comparing production dynamics between countries, highlighting regions with the highest rates of production growth and explaining the reasons for their competitive advantages. Particular attention is paid to environmental and socio-economic aspects, including sustainable land use, certification, carbon footprint, …

Intelligent Real-Time Flotation Froth Stability Monitoring Using Embedded Computer Vision: Lead (Pb) Processing Case Study, Ahmed Bendaouia, Taha Ismaili, Ismail Najib, Oussama Hasidi, Intissar Benzakour, Jianzhi Li, El Hassan Abdelwahed

Manufacturing & Industrial Engineering Faculty Publications

Froth stability in flotation refers to the ability of the froth layer to remain intact and avoid collapsing during the flotation process. A stable froth layer is crucial to maximizing mineral recovery and ensuring the efficient operation of flotation cells. Several factors influence the stability of the froth, including the depth of the froth, the crowding, the size of the bubbles, and the rate of movement of the froth. In this study, our main objective is to analyze and evaluate froth stability in real time, since it plays a critical role in process optimization for flotation-based mineral processing. We propose …

Physicochemical Analysis Of Carbon-Containing Materials Obtained From Vulcanized Rubber Waste And Their Application As Filler Pigments, N.S. Baxranova, Sh.T. Jurayev, D.R. Muminova, Jurayev Shohruh Tulqinovich

Chemical Technology, Control and Management

The article presents the results of chemical and scanning electron microscopic analyses of the solid fraction of carbon-containing materials obtained through thermo-oxidative pyrolysis of vulcanized rubber waste. Elemental analysis of the solid product formed during high-temperature pyrolysis of rubber-technical products at 650–700 °C is provided. In addition, the potential use of the carbonaceous material as a pigment is examined. Raman spectroscopic analysis of worn automobile tires showed that their composition consists of approximately 80 wt.% C, 7 wt.% H, 0.4 wt.% N, 1.5 wt.% S, 3 wt.% O, and 8 wt.% inorganic substances.

Intelligent Decision-Making Systems In Smart Greenhouses, Muso Berdiyor Ugli Allanov

Chemical Technology, Control and Management

Smart greenhouses offer a solution to sustainable food production under climate uncertainty, yet their management often depends on fixed rules or human intuition. This study proposes an intelligent decision-making framework that integrates optimization, simulation, and a neural set into a self-learning system. By generating “conditionally real data” through simulation and evolutionary algorithms, the system can predict microclimatic changes and optimize control of water, energy, and nutrients. Continuous digital feedback enables adaptive, data-efficient operation even with limited real data. Experimental results demonstrate reduced resource use and improved yield stability, advancing the development of autonomous and resilient greenhouse ecosystems.

Development Of Fire Prediction And Prevention Digital System Algorithms, Oybek Zokirovich Koraboshev

Chemical Technology, Control and Management

This research work is devoted to the development of algorithms for a digital system aimed at early detection, prediction and prevention of fire hazards. In the work, the process of fire hazard assessment is modeled on the basis of modern information technologies and artificial intelligence tools. The main focus is on collecting data in real time, analyzing it and creating algorithms that determine the level of danger. In the process of research, methods of data cleaning, normalization and determination of correlation between variables were used to process multidimensional data streams obtained from various sensors (temperature, smoke, gas concentration and humidity …

The Use Of Diagnostic And Restructuring Methods To Build Reliable Management Systems, Khurshid Salim Ugli Turayev

Chemical Technology, Control and Management

This article is devoted to the applied analysis of diagnostic and restructuring methods aimed at ensuring the reliability of control systems in the event of failures. The paper considers practical implementations of diagnostic and control algorithms using a servo drive setup as an example. The results of experiments are presented, demonstrating the system's behavior under various fault conditions. A comparative analysis of the effectiveness of the proposed solutions is carried out in terms of stability and operational accuracy. The obtained data confirm the feasibility of using adaptive control structures to increase the fault tolerance of technical systems. The article concludes …

Investigation Of The Fuel Combustion Process In Gas-Fired Furnaces For Automation Systems, N.R. Yusupbekov, Sh.M. Gulyamov, A.T. Rajabov, U.U. Kholmanov

Chemical Technology, Control and Management

The regularities of the combustion process of gaseous fuel in chamber furnaces are described. This process represents a homogeneous reaction in which there is no distinct boundary surface between the fuel and the oxidizer. It is shown that the latter either mix and then burn subsequently, or both processes occur simultaneously, corresponding respectively to kinetic and diffusion combustion. The structure of a turbulent-diffusion flame of gaseous fuel combustion is presented.

Analysis Of A Cloud-Based Robot Motion Planning System, Yusif Mardanzade, Latafat Abbas Gardashova

Chemical Technology, Control and Management

As a result of the integration of cloud computing technologies into the field of robotics, the concept of "cloud robotics" has emerged. Unlike traditional robots, cloud-based robot systems remove computation, memory, and even some software from the local device and rely on remote resources obtained over the network. This approach ensures that robots are not limited only by their internal computing capabilities and allows them to take advantage of the wide range of opportunities offered by the cloud infrastructure. As a result, robots have access to large databases, highly parallel computing, and collective learning capabilities anytime and anywhere. In addition, …

Algorithms For The Synthesis Of A Temperature Control System For The Inner Tube Heat Exchanger With A Steam Jacket, H.Z. Igamberdiyev, Jasur Sevinov, U.F. Mamirov, Sh.M. Abdishukurov

Chemical Technology, Control and Management

The synthesis of a feedback propagation control law for an inner tube heat exchanger with a steam jacket is addressed in this text. A controller has been developed that, based on temperature measurements taken at four points. The maintains the output temperature at a specified level by acting on the steam jacket temperature. To determine the parameters of the plant, a linear quadratic optimal (LQ-optimal) algorithm is employed. In the considered case, the optimal controller includes a proportional–integral (PI) component, as well as an additional term that requires storing the control input over the current interval for its computation. The …

Intelligent Method Of Dynamic Control For A Class Of Stochastic Nonlinear Systems, Isamidin Khakimovich Siddikov, Davronbek Abdalimovich Khalmatov, Gulchekhra Rakhimjanovna Alimova, Dilnoza Rakhmanovna Khushnazarova

Chemical Technology, Control and Management

The paper considered the problems of researching the stabilisation system and backstepping control of stochastic nonlinear systems. The characteristics of stochastic nonlinear dynamic control systems are random signals with normal lawful distribution, which significantly complicates task control. In stochastic control, it is necessary to determine the trajectories of the control variables in order to achieve the desired control objective at minimum cost. Since the mathematical equations of stochastic nonlinear systems are not always constant, not every model-based controller can be accurate. Therefore, in this work, a neuro-fuzzy network is used to evaluate the parameters of the control system with backstepping, …

Reinforcement Learning In A Virtual World: A Study Of Ppo And Sac Within Unity Ml Agents, Rufat Mammadzada

Chemical Technology, Control and Management

This study explores the use of Unity3D as a versatile platform for developing, training, and evaluating intelligent agents through reinforcement learning. Leveraging the Unity ML-Agents Toolkit, a dynamic 3D environment was created to examine agent learning behavior using two advanced algorithms: Proximal Policy Optimization (PPO) and Soft Actor-Critic (SAC). The simulation environment consisted of navigable terrain bounded by red borders, with collectible blue balls serving as rewards and a purple cube representing the agent. A carefully designed reward system was implemented to encourage goal-directed behavior and penalize inefficiency, while time constraints introduced an additional challenge requiring both precision and speed. …

Pricing Strategies In Global Channels: Considering The Effects Of Parallel Trade, Yuan-Mao Kao, Yang Yang, Shih-Fen Cheng, Cheng-Hung Wu

Research Collection School Of Computing and Information Systems

Pricing a global product differently across multiple regions is a common but controversial practice. Although price differentiation helps capture unique market characteristics, it also encourages parallel trade, which may affect the overall corporate performance of a global company. We study this problem with a single global business unit (GBU) and multiple local business units (LBUs). The GBU manufactures a product and sets a transfer price for supplying the product to all LBUs, and LBUs decide retail prices for their respective regional markets. Customers can purchase products in any region by comparing LBUs’ prices and other parallel-imported factors, and we construct …

Use Of Polymer Fiber To Improve Mechanical Properties Of Hma Containing Recycled Asphalt Pavement (Rap), Ashraf Rahim, Shadi Saadeh, Hani Al Zaraiee

Mineta Transportation Institute

A great percentage of highways and roads in California are constructed with Hot Mix Asphalt (HMA), and, as California infrastructure ages, these highways and roads must be maintained and rehabilitated. Reclaimed Asphalt Pavement (RAP) is considered an excellent alternative to virgin (raw, unprocessed) materials because it reduces the use of virgin aggregate and binder. Also, the use of RAP decreases the amount of construction waste placed into landfills. This laboratory study investigated the effect of two different commercial polymer fibers on the mechanical properties of HMA with RAP. Three different HMA with RAP mixes were used in the study. One …

Process-Driven Manufacturability Constraints In Design For Wire Arc Additive Manufacturing, Monsuru Ramoni, Sampson Gholston, Albert E. Patterson

Manufacturing & Industrial Engineering Faculty Publications

Wire arc additive manufacturing (WAAM) has emerged as a useful option for large-scale metal additive manufacturing. It has gained widespread use in the aerospace industry and other applications that require large and complex custom parts. The process is a combination of a precise control system and a welding process, typically GTAW or MIG welding. It is a member of the directed energy deposition (DED) family of AM processes. Compared with many metal AM processes, it is relatively simple and cost-effective but almost always requires a significant amount of postprocessing before parts can be used. The AM-based nature of the process …

Utilizing Ensemble Learning Techniques To Enhance Corn Price Prediction: A Case Study On South Dakota, Youssef Harrath, Jihene Kaabi, Ethan Price

Research & Publications

Predicting crop prices is a complex challenge that farmers must navigate each year, but machine learning algorithms can provide valuable insights to support more informed decision making. In recent years, agricultural price prediction models have made significant advances, with architectures achieving varying degrees of success. However, ensuring the accuracy and reliability of these models remains an ongoing challenge. This research explores the use of stacking, an ensemble learning technique, to enhance the performance of base models in predicting corn prices in many regions of the state of South Dakota in the USA. We propose a hybrid architecture that combines Long …

Shifted Frequency Analysis Hybrid Simulation Algorithm Based On Multi-Rate Asynchronous Coordination, Yankan Song, Libin Wen, Ying Chen, Jinji Xi, Haoyuan Zhang, Li Xiong

Journal of System Simulation

Abstract: Large-scale AC/DC power systems exhibit complex dynamics across multiple time scales, and existing hybrid simulations suffer from interface delays and frequency losses during multi-rate coordination, compromising accuracy. To address this issue, a multi-rate asynchronous coordination method was proposed to construct hybrid simulations using shifted frequency analysis (SFA). Within the multi-area Thevenin equivalence (MATE) framework, the algorithm introduced an interpolation-based asynchronous coordination mechanism, effectively eliminating interface delays; by extending SFA theory and designing a universal interface model, it achieved lossless data exchange between partitions with different rates and model types. Case studies on an AC/DC test system demonstrate that …

Path Planning Of Improved Rrt Algorithm Based On Deep Reinforcement Learning, Xiuman Liang, Ziliang Liu, Zhendong Liu

Journal of System Simulation

Abstract: To address the low planning efficiency, poor safety, and limited practicability of the RRT algorithm in global path planning within complex three-dimensional environments, which fail to meet the requirements of planning the safe flight path of UAVs, an improved SAC-RRT algorithm was proposed, which fused SAC deep reinforcement learning algorithm and RRT algorithm. A target point bias strategy and a dynamic step size based on the SAC decision-making network were designed to reduce the blindness of RRT. A random point correction process was designed to optimize the position of random points based on actions from the decision network and …

Multisource Information Fusion Method For Human Gait Perception, Guiliang Chen, Guowei Liu, Yongchao Li, Chao Cai, Zihao Li, Dong Yang

Journal of System Simulation

Abstract: In response to the insufficient gait perception capability during lower limb exoskeleton assistance, a human lower limb gait phase optimization classification model was proposed. A wireless transmission gait information collection system was designed for collecting the required gait phase feature information. Human joint angles were accurately calculated by fusing acceleration and angular velocity information using extended Kalman filtering. Additionally, kernel principal component analysis was applied to reduce dimensionality in conjunction with plantar pressure data. The LSSVM algorithm was employed to classify gait data, and the PSO algorithm was utilized to find the optimal classification parameters. Experimental results demonstrate that …

Distributed Dispatch Method For Distribution Network And Microgrid Considering Diverse Regulating Resources, Yanbo Chen, Jiahao Yin, Tuben Qiang, Haoxin Tian, Yuxin Liang, Zhi Zhang

Journal of System Simulation

Abstract: Traditional centralized optimization-based dispatch methods for distribution networks struggle to balance the interests of multiple stakeholders while ensuring economic efficiency and operational reliability of the system. To address this issue, a distributed dispatch method for distribution network and microgrid considering diverse regulating resources was proposed. The operational models of the distribution network and microgrid were established by comprehensively incorporating active management elements and demand response mechanisms. A fuzzy chance-constrained method was employed to model the uncertainty in renewable energy output, thereby constructing a coordinated optimization dispatch model for distribution network and microgrid under renewable generation uncertainty. An improved goal …

Deep Learning Modeling Of Multi-Scale Characteristics Of Large-Scale Wind Turbine Gearbox, Yang Hu, Zihao Li, Deyi Fu, Ziqiu Song, Fang Fang, Jizhen Liu

Journal of System Simulation

Abstract: To address challenges in characterizing high-frequency vibrations of wind turbine gearboxes, the long computation time of rigid-flexible coupled multi-body dynamics models, and the complexity of configuring gearbox models across multiple scenarios, this study proposed a deep learning modeling method for multi-scale operation using full-condition digital testing. The study proposed a cascaded extended simulation scheme based on stream data-driven OpenFAST and Adams and utilized dynamic mode decomposition technology to construct a multi-scale dataset for the flexible multi-body dynamics characteristics of the gearbox under all operating conditions of the wind turbine. Based on this dataset, a digital surrogate model covering multiple …

Optimal Scheduling Of Integrated Energy Systems Considering Source-Load Uncertainty And Linear Carbon Trading, Huaping Zhong, Yubo Fan, Jijun Shui, Danhao Wang, Daogang Peng

Journal of System Simulation

Abstract: In order to overcome the impact of source-load uncertainty on the scheduling of integrated energy systems (IES) and reflect the flexibility of the carbon trading price with the change in trading volume, an optimal scheduling method for integrated energy systems considering source-load uncertainty and linear carbon trading was proposed. The equipment within the IES was modeled, and nonparametric kernel density estimation was used to obtain the probability density function for each time period, generating the set of scenes through Monte Carlo simulation and calculating the probability of each scene. For the time shift of wind and solar output peaks …

Optimization Dispatch Method For High-Proportion Renewable Energy Power Systems Based On Sc-Ppo, Zhongkai Xu, Chenyang Chu, Kai Xie, Ruizhuo Zhao, Wenjun Ke

Journal of System Simulation

Abstract: The high proportion of renewable energy integration brings significant challenges of randomness, multi-objective coupling, and security constraints to power systems. Traditional model-driven methods have limitations in modeling accuracy and adaptability. To address these issues, this paper proposed a safety-constrained PPO algorithm (SC-PPO). The method included three improvements. A temporal convolutional network was utilized to construct a dynamic state encoder that integrated historical operation, real-time monitoring, and prediction data to form a causal state representation. A hierarchical reward structure was designed, and an adaptive weighting mechanism based on constraint satisfaction degree was introduced to coordinate multi-objective optimization. Physical constraint projection …

Microsimulation Of Infectious Disease Transmission Considering Virus Release, Transmission, And Action, Zhiming Fang, Shengdong Yuan, Ge Huang, Jingqian Yang, Zhongyi Huang

Journal of System Simulation

Abstract: Existing infection risk assessment methods mostly evaluate infection probability through mathematical models or simulation, but they lack analysis of the relationship between air circulation and individual infection probability. This study proposed a risk prediction model for infectious disease transmission based on indoor air circulation. At the microscopic scale, the space was discretized into grid points. By integrating CFD numerical simulation, the entire process of virus droplet release, transmission, and action was fully simulated. The simulation results show that in an obstacle-free room, the error between the total indoor viral load predicted by the model under windless and low wind …

Path Planning For Mobile Robots Based On Improved Rrt-Connect And Dwa Fusion, Yi Luo, Jia Deng

Journal of System Simulation

Abstract: To improve the efficiency and quality of dynamic path planning for mobile robots in complex environments, this paper proposed a path planning algorithm that combined an improved RRT-connect with the DWA. Two expanding random trees were introduced for alternating expansion, and a dynamically restricted sampling area was set to reduce the randomness of the sampling process while ensuring the probability completeness of the algorithm. A target bias adaptive step size strategy was employed to enhance the target orientation of the random tree expansion process. A greedy strategy was adopted to prune redundant nodes in the path and smooth the …