Operations Research, Systems Engineering and Industrial Engineering Commons^™

A New Integrated Design Framework For The Facility Layout Problem, Kyle F. Thomas

Open Access Theses

This thesis proposes a new integrated design framework for solving facility layout problems (FLP). The most popular existing framework, Muther's Systematic Layout Planning (SLP) does not address the variety of design goals associated with facility layout problems and is highly manual and so time consuming to perform. Furthermore, the SLP framework does not help the designer select a modeling tool to use in developing design alternatives, either by defining what a requisite model would include, or explicitly suggesting ones from literature. With the advancements made in academic research and computational capabilities since the development of the SLP framework, a new …

Influence Of Referential Coding In A Choice Task Performed In A Simulated Driving Cockpit, Aiping Xiong

Open Access Theses

Driving and other tasks performed by the driver of a vehicle are spatial. Thus, it is important to understand how the driver represents the spatial environment. In laboratory studies, the Simon task is used to study spatial coding. Participants are to make a left or right response to a nonspatial stimulus feature, but the stimulus can occur in a left or right position. The Simon effect is that responses are faster when the stimulus location corresponds with the response location. That effect is not usually found for a go/no-go task in which only one response is made to one of …

Solvent System Selection For Xylooligosaccharides Separation By Centrifugal Partition Chromatography Using Conductor-Like Screening Model For Real Solvents, He Zhang

Open Access Theses

The production of value-added, bio-based industrial commodity chemicals is an important area in science right now and this study provides an initial step in the recovery of bio-based chemicals from hemicellulose. Hemicellulose is a long chain polymer mostly consisting of xylose, which is a five-carbon sugar, and a variety of other compounds that are ubiquitous in plant life. The hemicellulose polymer chain can be depolymerized into smaller components, called xylooligosaccharides (XOS) with different chain lengths of xylose linked by beta-1-4 glycosidic bonds, using either hot water, or dilute sulfuric acid. The xylooligosaccharides can then be purified from one another from …

Multimodal Perception Of Histological Images For Persons Blind Or Visually Impaired, Ting Zhang

Open Access Theses

Currently there is no suitable substitute technology to enable blind or visually impaired (BVI) people to interpret visual scientific data commonly generated during lab experimentation in real time, such as performing light microscopy, spectrometry, and observing chemical reactions. This reliance upon visual interpretation of scientific data certainly impedes students and scientists that are BVI from advancing in careers in medicine, biology, chemistry, and other scientific fields. To address this challenge, a real-time multimodal image perception system is developed to transform standard laboratory blood smear images for persons with BVI to perceive, employing a combination of auditory, haptic, and vibrotactile feedbacks. …

Optical Direct-Write Nanolithography Based On Self-Assembled Resist, Meghana Akella

Open Access Theses

Holographic display is being developed for next generation mobile phones. However, manufacturing of miniature gratings for the holographic projectors cost a few thousand dollars today, not making the concept practical for commercial purposes. In this thesis, we discuss the feasibility of self-assembled nanoparticles to manufacture holographic gratings cost-effectively and at the nanoscale. Using our approach, the gratings can be manufactured at the scale of 20nm and the cost per chip is expected to cost a few dollars.^ In this thesis, a hydrophobic SAM was used to modify the surface of silicon. Direct-write UV laser lithography was used for photothermal patterning …

The Multi-Depot Minimum Latency Problem With Inter-Depot Routes, Timothy W. Duket

Open Access Theses

The Minimum Latency Problem (MLP) is a class of routing problems that seeks to minimize the wait times (latencies) of a set of customers in a system. Similar to its counterparts in the Traveling Salesman Problem (TSP) and Vehicle Routing Problem (VRP), the MLP is NP-hard. Unlike these other problem classes, however, the MLP is customer-oriented and thus has impactful potential for better serving customers in settings where they are the highest priority. While the VRP is very widely researched and applied to many industry settings to reduce travel times and costs for service-providers, the MLP is a more recent …

Initial Capabilities Documents: A 10-Year Retrospective Of Tools, Methodologies, And Best Practices, Bryan D. Main, Michael P. Kretser, Joshua Shearer, Darrin A. Ladd

Faculty Publications

The Joint Capabilities Integration and Development System (JCIDS) is 10 years old and ripe for review. A central output document of the JCIDS process is an Initial Capabilities Document (ICD) used by the Department of Defense to define gaps in a functional capability area and define new capabilities required. The research team analyzed 10 years of ICDs to identify methods and trends. The team found that several methodologies were favored and a convergence emerged in format and necessary content. Additionally, potential shortfalls in current best practices of interest to implementers and decision makers are identified. Guidelines and best practices are …

Decentralized Stochastic Planning With Anonymity In Interactions, Pradeep Varakantham, Yossiri Adulyasak, Patrick Jaillet

Research Collection School Of Computing and Information Systems

In this paper, we solve cooperative decentralized stochastic planning problems, where the interactions between agents (specified using transition and reward functions) are dependent on the number of agents (and not on the identity of the individual agents) involved in the interaction. A collision of robots in a narrow corridor, defender teams coordinating patrol activities to secure a target, etc. are examples of such anonymous interactions. Formally, we consider problems that are a subset of the well known Decentralized MDP (DEC-MDP) model, where the anonymity in interactions is specified within the joint reward and transition functions. In this paper, not only …

Decentralized Multi-Agent Reinforcement Learning In Average-Reward Dynamic Dcops, Duc Thien Nguyen, William Yeoh, Hoong Chuin Lau, Shlomo Zilberstein, Chongjie Zhang

Research Collection School Of Computing and Information Systems

Researchers have introduced the Dynamic Distributed Constraint Optimization Problem (Dynamic DCOP) formulation to model dynamically changing multi-agent coordination problems, where a dynamic DCOP is a sequence of (static canonical) DCOPs, each partially different from the DCOP preceding it. Existing work typically assumes that the problem in each time step is decoupled from the problems in other time steps, which might not hold in some applications. Therefore, in this paper, we make the following contributions: (i) We introduce a new model, called Markovian Dynamic DCOPs (MD-DCOPs), where the DCOP in the next time step is a function of the value assignments …

Time-Based Collision Risk Modeling For Air Traffic Management, Alan E. Bell

Engineering Management & Systems Engineering Theses & Dissertations

Since the emergence of commercial aviation in the early part of last century, economic forces have driven a steadily increasing demand for air transportation. Increasing density of aircraft operating in a finite volume of airspace is accompanied by a corresponding increase in the risk of collision, and in response to a growing number of incidents and accidents involving collisions between aircraft, governments worldwide have developed air traffic control systems and procedures to mitigate this risk. The objective of any collision risk management system is to project conflicts and provide operators with sufficient opportunity to recognize potential collisions and take necessary …

Streets: Game-Theoretic Traffic Patrolling With Exploration And Exploitation, Matthew Brown, Sandhya Saisubramanian, Pradeep Varakantham, Milind Tambe

Research Collection School Of Computing and Information Systems

To dissuade reckless driving and mitigate accidents, cities deploy resources to patrol roads. In this paper, we present STREETS, an application developed for the city of Singapore, which models the problem of computing randomized traffic patrol strategies as a defenderattacker Stackelberg game. Previous work on Stackelberg security games has focused extensively on counterterrorism settings. STREETS moves beyond counterterrorism and represents the first use of Stackelberg games for traffic patrolling, in the process providing a novel algorithm for solving such games that addresses three major challenges in modeling and scale-up. First, there exists a high degree of unpredictability in travel times …

Reinforcement Learning For Adaptive Operator Selection In Memetic Search Applied To Quadratic Assignment Problem, Stephanus Daniel Handoko, Duc Thien Nguyen, Zhi Yuan, Hoong Chuin Lau

Research Collection School Of Computing and Information Systems

Memetic search is well known as one of the state-of-the-art metaheuristics for finding high-quality solutions to NP-hard problems. Its performance is often attributable to appropriate design, including the choice of its operators. In this paper, we propose a Markov Decision Process model for the selection of crossover operators in the course of the evolutionary search. We solve the proposed model by a Q-learning method. We experimentally verify the efficacy of our proposed approach on the benchmark instances of Quadratic Assignment Problem.

A Method To Define Requirements For System Of Systems, Randy Gene Walker

Engineering Management & Systems Engineering Theses & Dissertations

The purpose of this research was to develop and apply a systems-based method for defining System of Systems (SoS) requirements using an inductive research design. Just as traditional Systems Engineering (TSE) includes a requirements definition phase, so too does System of Systems Engineering (SoSE); only with a wider, more over- arching, systemic perspective. TSE addresses the design and development of a single system with generally a very specific functional purpose enabled by any number of subcomponents. SoSE however, addresses the design and development of a large, complex system to meet a wide range of functional purposes enabled by any number …

Graphical Display Of The Effect Of Three Cash Flow Elements For Sensitivity Analysis, Kawintorn Pothanun

Engineering Management & Systems Engineering Theses & Dissertations

Sensitivity analysis is one of the most important analysis techniques in a decision making process. The analytic intent behind sensitivity analysis is the variation of parameters in data models, and the examination of the effect of these variations on the outcome of the models. There are four primary benefits from conducting a sensitivity analysis: (a) sensitivity analysis facilitates the decision makers' development of recommendations, (b) sensitivity analysis serves as a tool for communication among stakeholders or decision makers in a project or an organization, (c) sensitivity analysis increases overall understanding of the decision models, and (d) sensitivity analysis serves as …

Novel Models And Efficient Algorithms For Network-Based Optimization In Biomedical Applications, Seyed Javad Sajjadi

USF Tampa Graduate Theses and Dissertations

We introduce and study a novel graph optimization problem to search for multiple cliques with the maximum overall weight, to which we denote as the Maximum Weighted Multiple Clique Problem (MWMCP). This problem arises in research involving network-based data mining, specifically, in bioinformatics where complex diseases, such as various types of cancer and diabetes, are conjectured to be triggered and influenced by a combination of genetic and environmental factors. To integrate potential effects from interplays among underlying candidate factors, we propose a new network-based framework to identify effective biomarkers by searching for "groups" of synergistic risk factors with high predictive …

Analysis Of Different Techniques For Improving Performance Of Flat Plate Solar Collectors For Fruits Drying, Godfrey Mbabaye

Tanzania Journal of Engineering and Technology (TJET)

Fruits drying had become a broader technology in fruits and vegetables value addition. The technology is reported to be a promising way of drying without incurring higher cost but its adaptation has not been feasible in rural areas. Solar dryers have been developed but its poor performance limits its applicability. In this study, several techniques for modifications of traditional solar collector were addressed. It was observed that, varying collector designs in different techniques, a range of collector performances can be archived. The research shows that, collector efficiency can be improved by 9.6% when employing double duct counter flow compared to …

Noise Pollution In Maize Milling Smes, Erasto Elias

Tanzania Journal of Engineering and Technology (TJET)

Maize milling SMEs emit high levels of noise which can have adverse effects on human beings and therefore require controlling. This paper reports on a study that involved assessment and measurement of noise level in maize milling SMEs in DSM and Morogoro urban, gathering opinions of workers and the neighbouring population on noise problems, and suggesting solutions for noise control. Noise measurements in 41 SMEs were recorded from 89-103 dBA in DSM and 92-103 dBA in Morogoro near the milling machines. These values were higher than the safe level of 85 dBA for 8 hours working shift. Measurement also indicated …

Lemongrass And Cinnamon Essential Oils As Vitamin C Preservatives And Flavour Enhancers In Jam, Denice Byarushengo

Tanzania Journal of Engineering and Technology (TJET)

Lemongrass and cinnamon essential oils (LEO and CEO) are natural oils with high anti oxidation capacity, pleasant flavour, and various health benefits. Their ability to preserve vitamin C and flavour in jam have not been tested. In this study the performance of two essential oils (EOs) in preserving vitamin C and improving jam flavour were investigated. The EOs were produced by hydro-steam distillation of fresh lemongrasses and cinnamon leaves using a Clevenger apparatus. Jam samples were dosed with various concentrations of either single or mixed EOs and then stored at either room or refrigeration temperature. Samples were analysed for changes …

Cost Performance Dynamics In Lean Production Leveling, Ahmed Deif, Hoda Elmaraghy

Industrial Technology and Packaging

Balancing of production systems is one of the main lean manufacturing principles as it reduces in-process storage and related forms of waste. A dynamic systems approach is proposed to investigate challenges of implementing production leveling and associated costs. A lean cell producing at takt time is modeled using system dynamics. The model captures various lean tools influencing production leveling and their implications. Comparative cost analysis between various leveling implementation policies for stochastic demand with multiple products is conducted. Results showed that determining the most feasible leveling policy is highly dictated by both the cost and limitations of capacity scalability. In …

Air Force Inspection System: An Application For System-Of-Systems (Sos) Engineering, Joseph R. Lay

Theses and Dissertations

The Air Combat Command (ACC) Inspector General (IG) assesses the operational readiness and combat effectiveness of units by evaluating individual wings. Today's conflicts; however, are waged as a joint force. The Joint Forces Commander (JFC) leverages the resources of the entire military complex to achieve strategic objectives. The synergistic effects, created by the integration of individual weapon systems, produce greater results than the individual components. Evaluating wings outside the joint System of Systems (SoS) architecture does not provide a true assessment of combat readiness. Using a case study method, this research examines the idea of integrating a joint SoS architecture …

Social Network Analysis Of Researchers' Communication And Collaborative Networks Using Self-Reported Data, Oguz Cimenler

USF Tampa Graduate Theses and Dissertations

This research seeks an answer to the following question: what is the relationship between the structure of researchers' communication network and the structure of their collaborative output networks (e.g. co-authored publications, joint grant proposals, and joint patent applications), and the impact of these structures on their citation performance and the volume of collaborative research outputs? Three complementary studies are performed to answer this main question as discussed below.

1. Study I: A frequently used output to measure scientific (or research) collaboration is co-authorship in scholarly publications. Less frequently used are joint grant proposals and patents. Many scholars believe that co-authorship …

The Peer Collaborative: Supporting Engineering Education Research Faculty With Near-Peer Mentoring Unconference Workshops, Alice L. Pawley, Adam R. Carberry, Monica E. Cardella, Maria-Isabel Carnasciali, Shanna R. Daly, Jenna L. Gorlewicz, Geoffrey L. Herman, Morgan M. Hynes, Shawn S. Jordan, Nadia N. Kellam, Micah Lande, Matthew A. Verleger, Dazhi Yang

Engineering and Applied Science Education Faculty Publications

The PEER Collaborative National Network is a national peer mentoring network for early career tenure-track or mid-career tenured faculty who conduct and are primarily evaluated based on their research related to engineering education. This paper discusses the development, logistics, and outcomes of two PEER workshops built around a community of practice framework. Data from internal and external evaluations are presented to provide insights into aspects that worked well and aspects that need further development. Additionally, by reflecting on the workshops, participants crafted vignettes describing the impact the PEER workshops had on their personal and professional lives. The paper concludes with …

Acuta Enews June 2014 Vol. 43, No. 6

ACUTA Newsletters

In this Issue...

The Association for College and University Technology Advancement

What's on Your Desk?

Register for Fall Seminar in Boston

ACUTA's Summer Webinars

The Telephony IP Transition: Circumventing FCC Oversight

Stream Annual Conference 2014

Annual Dues Invoices Mailed

Info Links The Real Impact of Leadership

Check lt Out

An Integrated Approach To Developing Technical Communication Skills In Engineering Students, Ronald S. Harichandran, David J. Adams, Michael Collura, Nadiye O. Erdil, David Harding, Jean Nocito-Gobel, Amy Thompson

Engineering and Applied Science Education Faculty Publications

The Project to Integrate Technical Communication Habits (PITCH) is being implemented across seven engineering and computer science undergraduate programs. The overarching goal of PITCH is to develop written, oral and visual communication skills and professional habits in engineering students. PITCH activities begin in the very first semester and are reinforced and extended through all four years of each program. Senior design becomes the culminating experience in which students demonstrate the skills and habits acquired through PITCH courses. Student outcomes for the project were established based on an extensive survey of employers, alumni and faculty. Communication instruments include technical memoranda, poster …

Multi-Criteria Decision Modeling For Best Value Selections In Target Value Design Integrated Project Delivery, Brent Patrick Griffis

Master's Theses

Integrated Project Delivery (IPD) combined with Target Value Design (TVD) is a better way to deliver value for the client than traditional guaranteed maximum price (GMP) methods. With traditional GMP delivery methods, the interests of the parties are often at odds. The goal of IPD is to align all party interests in order to achieve a win-win scenario. Due to the aligning nature of IPD and the fact that each party’s success is dependent on achieving the project objectives as a whole; a non-biased, transparent, decision-making process is necessary in order to deliver the project objectives within the constraints of …

Creating A Seamless Pipeline Into Undergraduate Programs In Stem Fields Through Region-Wide Articulation Agreements, Immanuel Edinbarough, Mikhail M. Bouniaev, Bill W. Elliott

Manufacturing & Industrial Engineering Faculty Publications

Underrepresented minority students pursue science, technology, engineering, and mathematics (STEM) related degrees at much lower rates compared to other segments of the population. To attract minority students, schools with STEM programs have resorted to myriad strategies such as cohorts, scholarships, mentoring, summer bridges, etc. Some schools have also sought innovative ways to develop a pipeline for graduates of two-year technical degree programs to matriculate into their four-year STEM programs and complete the remaining coursework leading to a BAT or BS degree. The University of Texas at Brownsville (UTB) has adopted this latter innovative approach to increasing student enrollment in STEM …

Improved Accuracy In Real-Time Rfid Localization Systems Using Kalman Filtering, Benjamin J. Sanda

Masters Theses

The use of Radio Frequency Identification (RFID) has become widespread in industry as a means to quickly and wirelessly identify and track packages and equipment. Now there is a commercial interest in using RFID to provide real-time localization. Efforts to use RFID technology for this purpose experience localization errors due to noise and multipath effects inherent to these environments. This paper presents the use of both linear Kalman filters and non-linear Unscented Kalman filters to reduce error effects inherent to real-time RFID localization systems and provide more accurate localization results in indoor environments. A commercial RFID localization system designed for …

2d Wireform Process Improvement, Katy Conlin, Carlo Ebora, Jordan Gamble

Mechanical Engineering

The body of this work has been created for Edwards Lifesciences in conjunction with senior project requirements. As such, the information produced and contained within is under a non‐disclosure agreement. As per request by sponsor, the body of the work will not be submitted to any outside parties, and the title page will serve as proof of completion.

Assessing Customer Service In Airports – Models From The Uae, Aman Gupta, Mohammed Arif, Phillip A. Richardson

International Journal of Aviation, Aeronautics, and Aerospace

Customer service at airports has become a key priority for airport operators given the high degree of competitions. This paper uses an airport customer service model to analyze three examples from the United Arab Emirates (UAE). Passenger interviews, statistical information, customer feedback and other forms of information have been utilized to learn more about the customer view on the quality of service offered at these three airports. Detailed qualitative analysis of these case studies has highlighted some key issues in the area of customer service and identifies some opportunities for improvement.

Robust Two-Stage Stochastic Linear Programs With Moment Constraints, Sarah Yini Gao, Lingchen Kong, Jie Sun

Research Collection Lee Kong Chian School Of Business

We consider the two-stage stochastic linear programming model, in which the recourse function is a worst case expected value over a set of probabilistic distributions. These distributions share the same first- and second-order moments. By using duality of semi-infinite programming and assuming knowledge on extreme points of the dual polyhedron of the constraints, we show that a deterministic equivalence of the two-stage problem is a second-order cone optimization problem. Numerical examples are presented to show non-conservativeness and computational advantage of this approach.