Operations Research, Systems Engineering and Industrial Engineering Commons^™

The Noaa Corps -- A Participant Action Research Of A Uniformed Service Facing Termination, Richard Eugene Marriner Ii

Engineering Management & Systems Engineering Theses & Dissertations

The NOAA Corps is a uniformed service of the Federal Government. It is composed of officers commissioned by the President of the United States as are the officers of the Air Force, Army, Coast Guard, Marines, Navy, and Public Health Service. "NOAA" is the acronym for the National Oceanic and Atmospheric Administration, an agency within the U.S. Department of Commerce.

On January 24, 1996 the Clinton administration formally proposed that the NOAA Corps be terminated on October 1, 1996. If this were to become reality it would be the first time in U.S. History that a uniformed service has been …

Exploring Knowledge Processes For Technology Assimilation, Rochelle K. Young

Engineering Management & Systems Engineering Theses & Dissertations

In the emerging knowledge society, the ability to make the experience and expertise of those involved in and affected by new technology unconditionally available to all members of an organization is becoming increasingly important. One of the problems in developing such knowledge processes for technology assimilation is that current social structures do not easily accommodate unconditional participation. Since the implementation of modern information technology is changing the workplace and the nature of work itself, alternative social structures are needed. This research takes as given that deep questions concerning knowledge processes and social transformation are in principle undecidable; and, only questions …

Developing Methods To Measure And Project Levels Of Combat Readiness In A Naval Aviation Squadron At The Unit Level, Michael Lawrence White

Engineering Management & Systems Engineering Theses & Dissertations

Among the various missions and levels in a military organization, the term "Combat Readiness" is defined in many ways. To a unit-level command, such as an aircraft squadron, it simply refers to the unit's capability to perform its assigned mission when called upon. The proof of that capability is evident in the aftermath of combat, however, it is too late at that point to address any shortcomings that may exist. The problem is, how can the unit effectively define, continuously measure, and confidently forecast its ability to perform in combat? A quantitative model based upon historical data that encompasses all …

Dynamic Lot Sizing And Scheduling In A Multi-Item Production System, Padmanabhan Soundar

Engineering Management & Systems Engineering Theses & Dissertations

In this research, algorithms are developed to address the problem of dynamic lot sizing and scheduling in a single level (or single operation) production system. This research deviates from previous research in this area in that it does not have the kind of assumptions regarding the real world production system that normally were made to reduce the complexity of the problem. Specifically, this research explicitly considers finite capacity, multiple items, known deterministic dynamic demand, sequence dependent setup times and setup costs, setup carryover and variable backlogging. The objective is to simultaneously determine the lot size and the sequence of production …

A Total Systems Analysis Method For The Conceptual Design Of Spacecraft: An Application To Remote Sensing Imager Systems, Knut I. Oxnevad

Engineering Management & Systems Engineering Theses & Dissertations

Increased emphasis is being placed on improving the performance of space projects, within tighter budgets and shorter development times. This has led to a need for more efficient space system design methods. The research described here represents an effort to develop and evaluate such a method.

Systems engineering and concurrent engineering together provide the theoretical foundation for the method. The method, derived from both this theoretical foundation and ideas from experts in the space industry, emphasizes a total systems analysis approach, taking into account given mission requirements, and the mathematical modeling of interactions between system variables and between subsystems. The …

A Decision Support Model For Large Systems Using Quality Function Deployment And Goal Programming: A Capital Budgeting Problem, Kenneth Lindsey Jr.

Engineering Management & Systems Engineering Theses & Dissertations

Effective planning for the modernization of U.S. Air Force fighter aircraft requires a perception of the future tasks these aircraft will be called upon to perform, and the improvements and modifications that will be required to successfully accomplish those tasks. A great deal of research has been done in the areas of military strategy, quality function deployment, capital budgeting, and goal programming, as separate areas of study. This thesis details the research and analysis performed for a project called The Fighter Configuration Plan (FICOP), in which these areas were integrated in a decision support model to aid the Air Force …

Dynamic Scale Genetic Algorithm: An Enhanced Genetic Search For Discrete Optimization, Bela Dange Joshi

Engineering Management & Systems Engineering Theses & Dissertations

The minimization of operations and support resources of reusable launch vehicles is a complex task, involving discrete optimization and the simulation domain. Genetic algorithms, offering a robust search strategy suitable for integer variables and the simulation domain, can be applied to minimize these resources. This research developed an enhanced genetic algorithm for problems with a linear objective function, the most common class of discrete optimization problems. The dynamic scale genetic algorithm developed here incorporates concepts of implicit enumeration to enhance search. This is achieved by utilizing problem specific information to refine the solution space over successive generations. The utility of …

System Dynamic Modeling Of Activity And Flow Relationships In Plant Layout Problems, Gary Allen Weaver

Engineering Management & Systems Engineering Theses & Dissertations

The problem of determining an optimal plant layout involves the distribution of machinery, service areas, and storage spaces. The solution is usually determined for a specific period of time and static in nature. Planning for the plant layout is normally performed at the onset of new construction, or major refurbishment of an existing facility. In addition, plant layouts are renewed when a significant productivity decrease is experienced over long periods of time and linked to material flow problems, and when an expanding company plans for major capital expenditures in equipment and space. Due to the dynamic nature of business the …

Knowledge Acquisition And Structuring By Multiple Experts In A Group Support Systems Environment, Bernard Lee Lewis

Engineering Management & Systems Engineering Theses & Dissertations

This study addresses the impact of Group Decision Support Systems (GDSS) on expert system development by multiple Domain Experts. Current approaches to building expert systems rely heavily on knowledge acquisition and prototyping by a Knowledge Engineer working directly with the Domain Expert. Although the complexity of knowledge domains and new organizational approaches demand the involvement of multiple experts, standard procedures limit the ability of the Knowledge Engineer to work with more than one expert at a time.

Group Decision Support Systems offer a networked computerized environment for group work activities, in which multiple experts may express their ideas concurrently and …

Development Of A Knowledge-Based System For Generating Process Plans Using Group Technology: A Study For Norfolk Naval Shipyard, William P. Keene Jr.

Engineering Management & Systems Engineering Theses & Dissertations

The purpose of this research was to study and analyze the Norfolk Naval Shipyard's manufacturing methods of determining part families and generating part process plans for parts in the machine shop. A knowledge-based decision support system was designed based on knowledge acquired from machinist experts and documented sources of the Norfolk Naval Shipyard. The system interprets specific part information provided by the user, categorizes parts into part families and generates process plans to manufacture the parts. The system was evaluated and tested for parts provided by Norfolk Naval Shipyard.

Predicting Utility Bills For Air Combat Command A Study Of Forecasting Techniques, William L. Luthie

Engineering Management & Systems Engineering Theses & Dissertations

Many companies use forecasting techniques as a tool in managing their assets. Trends in such items as sales, population and inventory levels have all been determined at one time or another using forecasting, yet research indicates that these tools have not been utilized to predict utility budgets. This research was conducted to determine if such techniques could be applied to the specific task of predicting the utility bill at an Air Force base. Three quantitative models were chosen, the Moving Average, Exponential Smoothing and Regression, to determine their applicability to the task at hand. One base within Air Combat Command, …

Comparing Traditional Statistical Models With Neural Network Models: The Case Of The Relation Of Human Performance Factors To The Outcomes Of Military Combat, William Oliver Hedgepeth

Engineering Management & Systems Engineering Theses & Dissertations

Statistics and neural networks are analytical methods used to learn about observed experience. Both the statistician and neural network researcher develop and analyze data sets, draw relevant conclusions, and validate the conclusions. They also share in the challenge of creating accurate predictions of future events with noisy data.

Both analytical methods are investigated. This is accomplished by examining the veridicality of both with real system data. The real system used in this project is a database of 400 years of historical military combat. The relationships among the variables represented in this database are recognized as being hypercomplex and nonlinear.

The …

A Nonlinear Dynamic Method For Supporting Large-Scale Decision-Making In Uncertain Environments, Wayne Woodhams

Engineering Management & Systems Engineering Theses & Dissertations

This research developed a methodology for supporting decision making by reducing uncertainty in decision environments which are too large, dynamic and complex to be treated by traditional quantitative and simulation techniques. These environments are complex because of the free choice associated with human involvement, and the existence of a large number of interrelated factors which influence the outcomes of the decision process. They are dynamic because the ground rules affecting those interrelationships are constantly changing. Uncertainty cannot be treated probabilistically, since identification of a full set of outcomes and factors of influence is not possible.

The venue for the investigation …

Development Of A Knowledge-Based System For Wastewater Pipeline Rehabilitation, David Allen Reaves

Engineering Management & Systems Engineering Theses & Dissertations

The purpose of this thesis is to study and develop a knowledge-based system to make decisions for the rehabilitation of wastewater pipelines. Development includes justification for the use of an expert system, data acquisition from knowledge experts, program model development, model testing, implementation and future considerations including expansion. The model is developed and implemented using an expert system shell called XIPlus ®.

This knowledge-based system is designed specifically for the Navy Public Works Center Utilities Department at Norfolk Naval Base in Norfolk, Virginia for making decisions for the rehabilitation of the 50-year-old wastewater collection system. Recent sewer collapses and a …

An Approach For Representation Of Organizational Mental Models Using System Dynamics, Jörg-Peter Theissen

Engineering Management & Systems Engineering Theses & Dissertations

The concept of mental models has received much attention within recent years, especially within the context of organizational learning. This research is based on and departs from the Organizational Learning Process as developed by Keating, Robinson, and Clemson (1994). That process, which is based on a verbal representation of mental models, does not call forth the kind of change that is desired in Organizational Learning. This research investigates if mental models can be represented in the form of system dynamics models and inquires if this representation is beneficial to the process of Organizational Learning.

The research was designed as a …

Materials Recovery Facilities In The United States Virgin Islands: A Regional Facilities Location Model Study, Lloyd O. Prince Jr.

Engineering Management & Systems Engineering Theses & Dissertations

Continental municipalities have derived many benefits from the economies of scale associated with a regional approach to facilities location and management planning. Centralized solid waste processing facilities is an example. Island communities, however, surrounded by miles of ocean, are constrained to a fragmented approach to the facilities location solution. This research was conducted to determine if the regional paradigm suggested in the literature is applicable to a set of island communities connected by an ocean transportation infrastructure. A linear programming (LP) model, constraints and data requirements were developed and applied to a network of islands. A series of hypothetical material …

A Study Of Similarity And Analogical Decision-Making In Collaborative Design, Christopher Edward Weeks

Engineering Management & Systems Engineering Theses & Dissertations

The purpose of this study is to investigate the role of similarity and analogy in design communication and propose a descriptive representation of the analogical decision-making process in the context of engineering design. It is proposed that social, cultural, and contextual knowledge are brought to bear on statements of need in the form of analogy as a means to elicit and evince potential design solutions. A goal of this study is to identify communicative behaviors, representing process variables of analogical decision-making, that can be used to describe how design information is represented, manipulated, and conveyed in a collaborative design effort. …

Teamwork In The Workplace: A Discovery Of The Work Processes One Team Used To Meet Its Goals, Thomas Andrew Hassler

Engineering Management & Systems Engineering Theses & Dissertations

A century-old disagreement in academia surrounds the question of whether individuals acting alone accomplish all work or whether workers can truly act in concert to meet management's production requirements. Total Quality Management (TQM) is a powerful force today in the industrial world, and the formation of teams to solve short-term problems is one of its fundamental techniques. This dissertation focuses on a particular TQM team with the purpose of understanding the processes it used to meet its goals. This ten-member team functioned for about one year and was assigned goals leading to improved accelerator reliability. The investigator was a member …

An Evaluation Of The Implementation Of Total Quality Management In A Service Organization, Charles Stanford Stevens

Engineering Management & Systems Engineering Theses & Dissertations

This research consists of a formative evaluation designed to identify the steps necessary to revitalize a formerly successful Total Quality Management (TQM) process at a U.S. Navy engineering and logistics support organization. The research also developed a methodology to account for the fact that the investigator is a well-informed insider who served as one of the principle change agents for the TQM implementation.

The research is based on the researcher's observation that the major cause for the waning implementation was due to senior management and leadership issues and the organization-wide processes with which they interface. The investigation consisted of an …

A Multivariate Quality Control Approach For Automated Manufacturing Systems, Hisham Naim Ashur

Engineering Management & Systems Engineering Theses & Dissertations

In today's competitive manufacturing environment, effective and practical statistical quality control approaches are essential. A successful process control approach needs to provide on line real time monitoring of quality related characteristics.

No longer acceptable is an approach that analyzes quality related data only after the product is produced. A statistical process control approach that monitors the process during production and that reports trouble spots before bad products are made is necessary in an automated manufacturing environment.

An automated manufacturing environment is characterized by high volume production runs and short production cycles. Traditional statistical process control approaches are not capable of …

Development Of A Knowledge Based System For Wastewater Pipeline Failure Risk Assessment, Adam Mayanzani Ngaliga

Engineering Management & Systems Engineering Theses & Dissertations

The purpose of this thesis was to study and analyze the wastewater pipeline failure risk assessment process, and then design and develop an effective and efficient wastewater pipeline risk assessment tool for the Hampton Roads Sanitation District, in Virginia, U.S.A. A knowledge based system was developed using an expert system building shell (Xi-Plus).

The system design is based on the knowledge elicited from the experts and literature in sanitary pipeline failure risk evaluation. The knowledge base contains both heuristics and procedural rules. The system interprets the information provided by the user and reasons from that information to reach conclusions on …

A Computer-Based Strategy To Facilitate Organizational Learning Process, Charles B. Keating

Engineering Management & Systems Engineering Theses & Dissertations

This research investigated the development of Organizational Learning Process (OLP) through the application of a computer-based strategy in an organizational setting. OLP is developed from the organizational learning literature as an integration of similar concepts of organizational processes of inquiry essential to organizational learning. These concepts included: organizational dialectic (Argyris and Schon 1978), surfacing and testing mental models (Senge 1990a,1990b), and interpretation process (Daft and Weick 1984). A qualitative research methodology was developed within a participatory action research framework (Whyte 1989). A six phase research project, designed as a computer-based strategy to generate OLP, was applied in an organizational setting. …

A Sociotechnical Approach To The Study Of Semiautonomous Work Group Communication In Technical Organizations, Elizabeth B. Varnes

Engineering Management & Systems Engineering Theses & Dissertations

The sociotechnical aspects of group communication in semiautonomous technical work teams were investigated to understand how team members define "effective" group communication and what impact technical tools have on the group communication process. A team of workers with various technical backgrounds was selected for study. The study involved videotaped group sessions, a group training educational briefing and individual group member questionnaires. The results indicate that group members believed sharing information among group members was critical to successful communication and that certain technical tools could be effective during group meetings. The findings are congruent with the general theory that group communication …

Cross-Cultural Issues In The Management Of German-Owned Business Subsidiaries In Hampton Roads, Teja Ulrich

Engineering Management & Systems Engineering Theses & Dissertations

'Culture' can be described as patterns of thinking, feeling and acting that distinguish one cultural group from another. Cultural diversity is therefore likely to introduce variety to organizations in which individuals from different national backgrounds are working together. Although this variety bears the potential for an improvement of the cognitive development in the organizations, managers of multicultural business organizations tend to perceive cultural diversity as a disadvantage. This thesis attempts to identify the impact of cultural differences between Germans and Americans on organizations in which German managers work with American employees. German managers of eight business subsidiaries in the Hampton …

The Use Of A Factory Simulation To Evaluate A Flexible Control Structure For Integrated Manufacturing, Ling Ling Pan

Engineering Management & Systems Engineering Theses & Dissertations

Once a control structure for an integrated manufacturing system is decided upon, manufacturing activities are limited by that structure. A flexible control structure is presented as an approach for accommodating a variety of manufacturing activities, without being limited to a single control structure. A flexible control structure is one that allows multiple types of control structure in the manufacturing process. For example, both hierarchical and non-hierarchical structures may be used in a flexible structure. The properties of a flexible control structure are discussed from the point of view of graph theory.

Control structures for automated manufacturing are difficult to evaluate …

Reliability Trend Analyses With Statistical Confidence Limits Using The Luke Reliability Trend Chart, Stephen R. Luke

Engineering Management & Systems Engineering Theses & Dissertations

In electronic systems, it is interesting to understand exactly how the reliability is changing with time. Dynamic performance changes when a system passes from infant mortality stage into useful life phase and when the system passes from useful life phase into wearout phase. Dynamic performance also changes when the system is redesigned or when the system is acted on by a number of other outside forces such as a change in maintenance policy, escalation of alignment problems, or a change in training program. It is important to know when a system is changing dynamically in order to assess design, policy …

Diffusion Of Total Quality Management: An Organizational Self-Production Perspective, Baizhong Zhao

Engineering Management & Systems Engineering Theses & Dissertations

American industries are in the process of a quality revolution. Most companies are busy implementing Total Quality Management (TQM) programs. However, the experience of both Japanese and American companies indicates that successful TQM implementation depends on an understanding of implementation processes, which itself relies on an understanding of organizational self-organizing, for it is through this process that TQM gets diffused and becomes a core component of an organization's culture. Self-organizing is a so-called process-oriented approach, based on theory from cybernetics (Ashby, 1962; Steier & Smith, 1985; von Foerster, 1960), dissipative structure theory (Prigogine & Stengers, 1984), and chaos theory (Gleick, …

Cultural Transposition: Exploring Meanings Of And Strategies For Cross-Cultural Transfer Of Organizational Practices, Yongming Tang

Engineering Management & Systems Engineering Theses & Dissertations

The research objective is to study the phenomenon of transferring organizational practices which are conceptualized in one culture to another different culture. The purpose of the study is (1) to understand how cultural values and beliefs are manifested in behavior; (2) to explore how the Western organizational practices are interpreted and assimilated into an organization in an Eastern culture; and (3) to explore strategies for the fit between local cultural orientations and imported organizational practices. A qualitative, interpretive, and reflexive research methodology was developed to conduct this study.

The study was conducted in two phases. The first phase was designed …

Multidimensional Approach To Implementation Of Continuous Process Improvement Utilizing Small Run Analysis In A Shipyard Environment, Paul Ray Hollandsworth

Engineering Management & Systems Engineering Theses & Dissertations

Nationally, both public and private shipyards are experiencing a high rework rate (over 40%) in the fabrication of plug connectors used for electronic systems onboard Navy vessels. The shipyard's survival depends on acquiring the elements necessary to maintain a major industry in a position of continuous improvement that produces a better product than their competitors, at less cost, in a safe manner, and on schedule.

This research addresses the complex problem of how to introduce quality control methodologies within a job shop environment that assists in identifying variables that influence the rework rate of plug fabrication process over a four …

Domain Limitations And Interface Requirements For Expert Developed Knowledge Based Systems, Bernard Lee Lewis

Engineering Management & Systems Engineering Theses & Dissertations

The expanded use of graphical, case-based and object oriented techniques in expert systems creation has made it more practical for domain experts to develop their own applications. This thesis focuses on the elements necessary in an expert/developer interface and looks at various forms and techniques that exemplify such an approach. The spreadsheet metaphor is used for an interface or managed set of interfaces that a domain expert can use in building his own expert system or prototype. criteria are established for such interfaces and recent commercial offerings that make expert-created knowledge-bases more practical are reviewed for techniques that qualify. Approaches …