Operations Research, Systems Engineering and Industrial Engineering Commons^™

Sensitivity Analysis In Cellular Manufacturing System In The Case Of Product Mix Variation, Hamid Seifoddini, Manocher Djassemi

Industrial Technology and Packaging

In this paper, performance measures such as mean flow time and work-in-process inventories will be used to determine the changes in the performance of a cellular manufacturing system due to product mix variations.

Improving The Performance Of Cellular Manufacturing By A Dynamic Part Assignment Approach, Hamid Seifoddini, Manocher Djassemi

Industrial Technology and Packaging

In this paper, a simple dynamic part assignment (DPA) procedure is introduced and its effects on the performance of cellular manufacturing systems is evaluated. In this procedure rerouting of parts among machine cells is allowed for better machine utilization. Three data sets are used to compare the performance of manufacturing systems under job shop and cellular manufacturing when DPA is employed. The results of simulation runs indicate that the proposed DPA method improves the performance of cellular manufacturing significantly by reducing the congestion in machine cells with long waiting lines.

Reaction Based Grasp Force Assignment, Mark W. Hunter

Theses and Dissertations

An iterative method is developed by which the contact forces required to apply an arbitrary wrench (six elements of force and moment) to a stably grasped object may be calculated quickly. The assignment of contact forces, given a required object wrench, is accomplished with the use of fuzzy logic. This concept is referred to as the fuzzy logic reactive system (FLRS). The solution is versatile with respect to goals inherent in the rulebase and the input parameters, and is also applicable for an arbitrary number of contacts. The goal presented in this research, to illustrate the concept of the FLRS, …

A New Grouping Measure For Evaluation Of Machine-Component Matrices, Hamid Seifoddini, Manocher Djassemi

Industrial Technology and Packaging

The machine-component matrix is the main input to most machine-component grouping models used in cellular manufacturing. A number of measures have been developed for performance evaluation of machine-component grouping algorithms. In this paper, the relationship between these measures and the performance of the corresponding cellular manufacturing system is evaluated and a new grouping measure is developed which is more consistent in predicting the suitability of a manufacturing system for cellular manufacturing.

Effects Of Refrigeration And Cryogenic Treatments On Austempered Ductile Iron, Gerard R. Thiel

Dissertations and Theses @ UNI

Low temperature treatment, as a method of improving mechanical properties of metals, has been studied and used for well over 60 years. Until recently these treatments have been limited to hardness and wear improvements of high alloy irons and steels. The purpose of this research is to determine the effects of refrigeration and cryogenic treatments on the mechanical properties, including hardness and tensile strength of austempered ductile iron.

This research included the production of a high strength ductile iron of low alloy content capable of being used in either the as cast, conventionally heat treated or austempered condition. Refrigeration and …

Ultrasound Modified Ferric Hydroxide/Cupric Ion Adsorption And Sequestration At Varying Ph Levels, Humberto Campos

Dissertations and Theses @ UNI

This study was undertaken to determine if hydrous metal oxide adsorption, an important treatment method used to remove adsorbates from aqueous solution, could be enhanced through ultrasonic irradiation. A model system based on preformed hydrous ferric oxide as the adsorbent and copper as the adsorbate was investigated. Brief exposure of the preformed hydrous ferric oxide floe to intense ultrasonic radiation (ca. 13 Watts/cm2 ) in the presence of copper species effectively disrupted the flocculated particles permitting the copper adsorbate to access adsorption sites previously isolated within the floe. The experimental data indicate that ultrasonic disruption of pre-formed hydrous ferric oxide …

Tracking Air Force Pallets Using Rfid Technology: A Concept Study, Gary A. Gross

Theses and Dissertations

The lack of asset visibility experienced at Aerial Ports of Embarkation (APOEs) during Operation Desert Storm is a phenomenon that has occurred in every major conflict for the last 40 years. The costs associated with this lack of control directly relate to the combat readiness and capability of supported units. This study examined the possibility of installing a Radio Frequency Identification (RF-ID) system to track Department of Defense 463L pallets worldwide. Performance characteristics of commercially available RF-ID systems were summarized, and a conceptual Air Mobility Command (AMC) tracking system was presented. For purposes of concept study, Amtech Corporation's Intellitag RT …

A Study Of The Factors Associated With Successful Technology Transfer And Their Applicability To Air Force Technology Transfers, James B. Rose

Theses and Dissertations

Although the United States is a world leader in scientific research, it lags behind some economic powers in the application of technologies. As quality and manufacturing excellence were critical to US competitiveness in the l98Os, so is commercializing technologies in the 199Os. With billion dollar budgets and exceptional scientific talent, the potential for fruitful technology transfer is abundant. By definition, federal-to-commercial technology transfer is the ability to leverage national investments in technology beyond their traditional customer base. The technology can be physical devices, processes, knowledge, or proprietary information. Unfortunately, and despite exhaustive legislative efforts, US industry has fallen behind its …

A Simulation Study Of Quality Index In Machine-Component Grouping, Hamid Seifoddini, Manocher Djassemi

Industrial Technology and Packaging

Simulation modeling is employed to determine the effectiveness of quality index in screening machine-part matrices for the development of cellular manufacturing systems.

Assisting Defense Conversion Technology Transfer Efforts. A Case Study Of Ohio's Miami Valley, Marissa C. Salvador

Theses and Dissertations

Major changes in the geopolitical environment and the social and economic needs of the United States have resulted in resources being shifted away from national defense. Although the expected decrease in defense spending should not be harmful in macroeconomic terms, it can be devastating locally. To mitigate the effects of the drawdown, individual states and local communities must search for ways to bolster their local economies. One avenue that can be pursued to enhance future economic growth is the transferring of technologies to the commercial sector. Intermediary organizations have emerged to facilitate the process of technology transfer by serving as …

The Process Of Technology Transfer: A Case Study Of The National Aero-Space Plane Program, Brett T. Smith

Theses and Dissertations

Due to reduced funding levels and increased pressure towards cooperation with industry, government research and development (R&D) organizations are becoming increasingly involved in the transfer of technology to the commercial sector. However, the process of technology transfer is complex, and transfer activities are being applied inconsistently across the Department of Defense. This research explores the approaches, processes and mechanisms to accomplish technology transfer. A comprehensive literature review documents many of the transfer concepts that have been proposed or are currently in use. A detailed case study then examines the technology transfer efforts of an advanced government research organization: the National …

Perceived Importance Of Iso 9000 Factors As Indicators Of Quality In Industrial Technology Related Programs At Four-Year State Regional Universities, Floyd L. Olson

Dissertations and Theses @ UNI

Industry has often used a quality standard known as ISO 9000. No evidence has been located demonstrating the applicability of an industrial quality model to a singular academic department. The problem of this study was to determine if the guidelines for ISO 9004-2 could have been considered appropriate for Industrial Technology related programs and how they could have been used to indicate quality within such programs.

The purpose of this study was to seek knowledge relating the importance of ISO 9004-2 guidelines to audit and/or improve the quality management of Industrial Technology related departments at 4-year state regional universities. This …

Identification Of Success Factors In The Implementation Of Computer-Integrated Manufacturing, Dean Harold Jensen

Dissertations and Theses @ UNI

The review of recent literature showed a clear trend within the manufacturing sector toward the integration of design and production activities through increased application of the computer. The competitive advantages of computer integration were reported, as well as increased risk due to the amount of time and capital expended in system implementation. The identification of computer integrated manufacturing (CIM) success factors may reduce this risk.

Prior efforts to identify success factors for other areas of endeavor showed that success factors tended to vary with the four project phases, but were stable over time within a particular phase. More recently, empirical …

Retrieval Of Atmospheric Turbidity Coefficiant And Water Column Density Fro Solar Irradiance Data, Felix Tendeku

Journal of the Arkansas Academy of Science

Ground-based measurement of solar irradiance has been made using a spectroradiometer at wavelengths inapx-water absorption band. An algorithm is formulated to retrieve simultaneously the atmospheic water column density and Angstrom's turbidity coefficient. The transmission models used to account for the contribution from diverse atmospheic absorbing and scattering elements are presented.

Merits Of The Production Volume Based Similarity Coefficient In Machine Cell Formation, Hamid Seifoddini, Manocher Djassemi

Industrial Technology and Packaging

In this paper, two types of similarity coefficients are compared: (1) the Jaccard's coefficient and (2) the production volume based coefficient. Each is used to form a cellular manufacturing system whose performance will be used as a measure of effectiveness of the similarity coefficient. The sum of intercellular and intracellular material handling costs is used as a criterion for performance evaluation.

An Exploration Of Technology Transfer Control: A Case Study Of Wright Laboratory, William K. West

Theses and Dissertations

Federal laboratories, system product centers, and military logistics centers are being challenged to leverage national investments in technology beyond their traditional customer base--technology transfer. Participation in domestic technology transfer is growing at an astounding rate. Additionally, the federal government has invested and continues to invest billions of dollars into active defense conversion, dual-use technology, and technology transfer. The objective of this research is to explore how one government laboratory controls its technology transfer process, in both the near and long terms. This research examines the motives for participating in technology transfer. The researcher presents several of the processes that are …

Analysis Of Efficiency Measures For Block Diagonal Machine-Component Charts, Hamid Seifoddini, Manocher Djassemi

Industrial Technology and Packaging

Group efficiency measures have been developed to evaluate machine-component charts for the formation of cellular manufacturing systems. In this paper the existing grouping efficiency measures will be evaluated by determining the relationship between the values of a grouping efficiency measure and the performance of the corresponding cellular manufacturing system.

Method For Determining Atmospheric Aerosol Optical Depth Using Solar Transmission Measurements, Felix Tendeku

Journal of the Arkansas Academy of Science

A multiple wavelength radiometer instrumentation has been developed and used to measure solar irradiance in a water vapor absorption band in the near-infrared region. From these measurements the total atmospheric optical depth at each wavelength of observation is deduced using a linear least-squares fitting method. An iteration technique, based on a power law wavelength dependence of aerosol optical depth, is employed to retrieve aerosol optical depth from the total optical depth data. The technique permits simultaneous determination of precipitable water vapor amount.

A Dynamic Part Assignment Procedure In Machine Cell Formation, Hamid Seifoddini, Manocher Djassemi

Industrial Technology and Packaging

A major contributing factor to the under utilization of machines in cellular manufacturing is the development of long queues in front of some machines in machine cells. This paper presents a procedure which identifies such machines and redistributes their loads to alternative machines whenever feasible.

Tensile Comparison Of The Variables Using The Statasys 3-D Modeler, William Oscar Birt

Electronic Theses & Dissertations

The objective of this study was to investigate some of the different variables that were used in building a prototype model on the Stratasys 3-D Modeler. Variables tested were: 1) speed of the head; 2) z slice; 3) road width; 4) orientation angle of the path; 5) tip and liquefier temperatures; 6) envelope temperature. There were 34 tests and each test had 10 specimens in it for a total of 340 tensile specimens. Each test consisted of the six variables. Tests indicated that the “orientation angle” variable had the greatest effect on tensile strength.

A Methodology For Project Selection Using Economic Analysis And The Analytic Hierarchy Process, Jeffrey L. Battin, Thomas J. Bender

Theses and Dissertations

This study examined the applicability of a multiple criterion decision making method, known as the Analytic Hierarchy Process (AHP) , to economic analysis decisions involving project selection. Through a survey of the literature and current practices, it was determined that qualitative criteria were not adequately represented in a typical economic analysis of projects. Several MCDM methods were examined and the AHP was found to be the most promising technique to rate projects on a ratio scale. Two types of project selection problems, those involving nonmutually exclusive alternatives and those involving mutually exclusive alternatives, were examined. It was determined that the …

A Wear Analysis Study Of Selected Alternative Foundry Tooling Materials Using Impact Abrasion Testing, L. Fred Vondra

Dissertations and Theses @ UNI

The purpose of this study was to simulate the wear characteristics of foundry tooling using an impact abrasion test apparatus. The wear characteristic was exhibited by non-metallic materials and was measured as a function of percentage weight loss and was benchmarked against Class 30 gray iron. The research question focused on whether or not a non-metallic material exists that exhibits comparable or superior wear characteristics to Class 30 gray iron for possible consideration as tooling materials for foundry applications. The information obtained adds to knowledge and is useful to foundry professionals in making tooling decisions.

The 34 test materials were …

Factors Affecting The Development Of Unassigned Patents In Iowa, Diane Darlene Wheeler Schou

Dissertations and Theses @ UNI

Inventors granted patents from 1975 to 1990 in Iowa identified, via a questionnaire, where they perceived their invention on Bright's scale of eight stages of development. Stages were: idea, rationalization (has merit), experimentation, demonstration of prototypes, working model, commercial (market entry), commercial acceptance (sales), and commercial proliferation (other markets). The questions identified factors affecting development. The factors included: resources assisting development, events influencing start-up, sources of money for development, method of manufacturing, experiences with manufacturers, marketing techniques, sales, profit/loss, concerns, patent renewals, and age of patents. Open-ended questions allowed for additional comments.

Commercial acceptance or commercial proliferation was achieved by …

The Production Data-Based Similarity Coefficient Versus Jaccard's Similarity Coefficient, Hamid Seifoddini, Manocher Djassemi

Industrial Technology and Packaging

This paper compares the performance of Jaccard's similarity coefficient with the production data-based similarity coefficient. A number of machine-component charts taken from the literature or randomly generated are used to form machine-component groups. Then, the sum of intercellular and intracellular material handling costs for each machine-component group is calculated and used as a basis for performance evaluation of the two similarity coefficients.

An Unsolicited Sociotechnical Intervention In A Public System: A Participatory Action Research Approach, Ely Alfred Dorsey Jr.

Engineering Management & Systems Engineering Theses & Dissertations

This research concerns itself with Participatory Action Research in a hostile setting. The thrust is a sociotechnical one, with the intent being to enhance the capacity of the Wallop Public School System, Wallop, USA, to address its problem of racial disparate treatment of Black children. The potential for Organizational Learning among the school system's senior staff is studied. Some new theory about such hostile interventions is proposed. Also discussed are questions about reliability and construct validity within the context of the multiple role playing that an interventionist has in this setting. The role of the press is reflected in the …

The Importance Of Technology Assessment Procedures For Missionary Trainees, James Michael Hoeksema

Dissertations and Theses @ UNI

The purpose of this study was to identify those technology assessment (TA) procedures that are most important to teach to missionary trainees. This was based on the perceptions of the chief executive officers of U.S. Protestant mission agencies.

A survey was used to collect the research data. A total of 175 usable survey instruments were returned (25.6%). Analysis of the data consisted of frequency distributions and Chi-square.

A "common core" of TA procedures which are being used by mission agencies was identified. These were: (a) on-site field investigation, (b) committee meetings, (c) brainstorming, (d) personal interviews, (e) review of related …

Competencies Required Of Baccalaureate Degree Graduates From Graphic Communications Programs, Eldon B. Swanson

Dissertations and Theses @ UNI

The problem of this study was to identify and validate a list of competencies that may be used by graphic communications educators as the basis for curricula development that meets the needs of the contemporary graphic communications industry. The purpose of this study was to provide the graphic communications educator with a comprehensive, prioritized, and logically clustered list of competencies required of baccalaureate degree graduates from graphic communications programs as perceived by representatives from the graphic communications industry and graphic communications educators.

The survey instrument used for this study is based on a seven point graphic rating scale on which …

Computer Usage In The Construction Industry And Construction Education, Stephen Douglas Stulken

Dissertations and Theses @ UNI

The rapid growth of computer usage in American society, and in the construction industry in particular, has important implications for construction education programs. There is a lack of current information about computer usage in the construction industry. Without this information, construction educators are less likely to provide students with relevant computer competencies that relate to the needs of the construction industry.

The objective of this study was to determine to what extent construction education programs provide the necessary computer competencies for their students. This was accomplished by comparing the current status of computer usage in the construction industry with computer-related …

Self-Perceived Benefits Which Occur As The Result Of Kimberly-Clark's Health Management Program, Richard Lee Langford

Dissertations and Theses @ UNI

The purpose of this study was to determine if employee participants in Kimberly-Clark's Health Management Program perceived benefits from their participation that have affected their lifestyles, both at work and outside of work.

The population for this study consisted of all salaried employees of Kimberly-Clark in the Fox Valley of Wisconsin who have been participants within the Health Service Center for at least six months at an adherence level of two days per week or more. A random sample of this population was used to conduct the survey. A total of 130 employees were surveyed.

The research study was of …

Technology Lecture Series, Russell W. Maatman

Pro Rege

No abstract provided.