Operations Research, Systems Engineering and Industrial Engineering Commons^™

Understanding Innovation Adoption In The Air Force, Morgan J. Evans

Theses and Dissertations

Innovation adoption has become a critical issue for organizations in both the public and private sectors. The search for competitive advantage has led to the recognition that innovation is a vital ingredient for an organization's survival and profitability in this information age. The United States Air Force is seeking to adapt to this new information age by transforming its business processes in order to sustain its competitive advantage as the world's most respected air force. Adopting innovations and integrating new or improved technologies, capabilities, concepts, and processes into Air Force planning and acquisition activities, organizations, and operations are goals of …

An Investigation Into Microwave Energy To Soften Scrap Tire Rubber Aiding Existing Mechanical Separation Processes, Russell Jon Lucas

Dissertations and Theses @ UNI

This research was performed to soften scrap tires to aid in their transformation from whole tires to valuable streams of rubber and steel for reuse in industry. Actual shredded scrap rubber was used in this experiment to determine if this highly variable material could yield consistent results if subjected to volumetric heating from a magnetron emitting microwave energy.

A consumer microwave oven was used to heat this material. This oven had its control circuitry modified by using a programmable logic controller to operate the energy exposure time. The sample's surface temperature was measured utilizing a non contact infrared thermometer. All …

Effects Of The Use Of Soybean Oil As Cutting Fluid On The Surface Finish For Turning Operations, Carlos Alberto TeráN Yengle

Dissertations and Theses @ UNI

Concerns about the long term supply of petroleum, the instability of its prices, and growing environmental issues have led to a variety of legislative and public support for the use of agricultural commodities in industrial applications. This study is of importance because of environmental and health hazards concerns, and the possibility of reducing operating costs with the elimination of disposal of used cutting oil that the use of biodegradable oil offers to the metal-cutting operations.

The purpose of this study was to investigate the effect of the use of an experimental soybean-based oil as a cutting fluid on surface finish …

Effect Of Time-Based Parameters On The Agility Of A Dynamic Mpc System, A. M. Deif, W. H. Elmaraghy

Industrial Technology and Packaging

This paper presents a dynamic manufacturing planning and control (MPC) system that can maintain agility through the ability to dynamically switch between different policies due to varying market strategies. The dynamic behavior of the developed system is investigated by studying the effect of the time based parameters on responsiveness and cost effectiveness of the system reflected in the natural frequency and the damping of its different configurations. Results showed that the agility requirements are directly affected by the time based parameters of the MPC system: production lead time, capacity scalability delay, and shipment time. This resulted in a better understanding …

A Control Approach To Explore The Dynamics Of Capacity Scalability In Reconfigurable Manufacturing Systems, Ahmed M. Deif, Waguih H. Elmaraghy

Industrial Technology and Packaging

This paper presents a dynamic model and analysis for one of the major characteristics of reconfigurable manufacturing systems (RMSs) capacity scalability. The dynamic model is analyzed using its transfer function. Dynamic characteristics associated with the delay in capacity scalability and how to minimize this delay are discussed using control approaches. The problem of how to supply exact capacity in response to market changes is also examined by solving the dynamic problem of the production offset phenomenon in RMSs. The effect of work in process as a damping factor for production disturbances during capacity scalability is addressed. Finally, a general capacity …

Developing A New Program In Marine Engineering Technology, Anthony Dean, Gary Crossman, Alok Verma

Engineering Technology Faculty Publications

The Department of Engineering Technology, in the Batten College of Engineering and Technology at Old Dominion University, in conjunction with members of its advisory board and other industry representatives have begun a sustained effort to promote and develop a strong course of study in Marine Engineering Technology. Located in Norfolk, Virginia, Old Dominion University, and particularly the Department of Engineering Technology, is uniquely positioned to develop such a program. With strong ties to the world's largest Naval Base and superlative shipbuilding, maintenance and repair facilities, early qualitative research indicated high interest for development of such a program in support of …

Study On Human Elements In The Application Of Automatic Identification System (Ais), Xilei Lu

World Maritime University Dissertations

No abstract provided.

Leveraging Itil To Govern Aoc Information Technology, Robert V. Weaver Iii

Theses and Dissertations

The Air Operations Center (AOC) is a complex system of systems that is resistant to traditional engineering controls and management strategies. The US Air Force (USAF) seeks to transform its antiquated AOC Information Technology (IT) management function into an agile enterprise capable of leveraging cutting-edge technology by aligning the AOC's infrastructure with its organizational strategies and vision. The USAF calls this effort a transformation. Private industry calls it IT Governance. To achieve AOC IT Governance, the USAF must stop managing infrastructure components and start managing IT services. IT Service Management abstracts business processes from the technology supporting them by creating …

The Use Of Rfid In Manufacturing And Packaging Technology Laboratories, Manocher Djassemi, Jay Singh

Industrial Technology and Packaging

Mandated use of Radio Frequency Identification (RFID) on goods at pallet, case and item level continues to churn the Consumer Product Goods (CPG), logistics and retail industry. The statement “Internet of things” is slowly becoming true; with concerted efforts from standard setting bodies such as Electronic Product Code (EPC) global, International Standards Organization (ISO), Fast Moving Consumer Goods (FMCG) companies like Gillette, P&G and major retailers like Wal-Mart, TESCO, and the US DoD, to replace barcodes with RFID tags. RFID bridges many areas of manufacturing including inventory management, assembly operation, material handling, packaging and shipping by providing an accurate and …

A Simulation Analysis Of Factors Influencing The Flexibility Of Cellular Manufacturing, Manocher Djassemi

Industrial Technology and Packaging

The performance of cellular manufacturing (CM) systems in a variable demand and flexible workforce environment has been examined using simulation modelling. Discrepancies between academicians and practitioners' findings with respect to flexibility and uneven machine utilization in CM systems are discussed. The views of two parties were incorporated in simulation models to rectify the existing discrepancies. While the results of this study confirm the previous findings of academicians regarding the deterioration of the performance of CM in a variable product mix situation, it appears that those results may be significantly influenced by considering a flexible workforce. The simulation results show that …

Production Research In China, S. Chaudhry, S. Feng, H. Li, H. Sui, J. L. Zhang, Z Zhang, Li Xu

Information Technology & Decision Sciences Faculty Publications

(First paragraph) China is the world’s largest emerging economy. In recent years, China has moved to an increasingly market-oriented economy that opens to international trade and investment. At the same time, the popularity of China as a manufacturing base, assembling goods for sale worldwide is growing. In addition to global manufacturers who have built their own plants in China, many manufacturing companies are outsourcing production to Chinese subcontractors and branding the products with their own logos. In today’s China, production research is becoming more and more important; advanced production research becomes an important enabler to make its manufacturing industry competitive. …

Inventory Simulation And Optimization Using System Dynamics, Structural Modeling Equations And Genetic Algorithms In The Drivetrain Division Of An Automotive Manufacturer, Marco Sisfontes-Monge

Dissertations and Theses @ UNI

Strategic planning and control are among the most critical activities that modern enterprises require to succeed in the global economy. This research is an original study that investigated the combination of tools and methodologies in order to apply them to a midwestern tractor manufacturer. The current study identified the constraints applicable to a polishing line in the Drivetrain Division of a major tractor manufacturer interested in exploring alternative techniques to improve its worldwide manufacturing operations.

The specific questions that this project tried to respond are stated as follows:

1. What were the most important variables that affected inventory levels of an …

Management Of Extremes In The Configuration Of Interoffice Telephone Switch & Priority Systems, C. Ariel Pinto

Engineering Management & Systems Engineering Faculty Publications

This paper describes how to enable diverse enterprise customers for voice-data switch to achieve in configuration a balance among users, features, and perceived reliability subject to extremes of traffic. The analysis entailed the simulation of the voice-data switch with embedded priority system, generation of latency times for various configurations and transaction traffic rates, and the development of a framework and theoretical propositions for configuration of super-saturated systems. It was shown that the concept of tolerance levels defined in the risk of extreme events can be applied for embedded priority systems and was the basis for the application of the zone-configuration …

The Effectiveness Of Monitor-Based Augmented Reality Paradigms For Learning Space-Related Technical Tasks, Christopher Michael Opalenik

Master's Theses - Daytona Beach

Currently today there are many types of media that can help individuals learn and excel in the on going effort to acquire knowledge for a specific trait or function in a workplace, laboratory, or learning facility. Technology has advanced in the fields of transportation, information gathering, and education. The need for better recall of information is in demand in a wide variety of areas. Augmented reality (AR) is a technology that may help meet this demand. AR is a hybrid of reality and virtual reality (VR) that uses the three-dimensional location viewed through a video or optical see-through media to …

Package Performance Testing Of Dangerous Goods In High Altitude Shipments, S. Paul Singh, Gary J. Burgess, Jay A. Singh

Industrial Technology and Packaging

This paper discusses the impact of high altitude shipments on package integrity. High altitude shipments are encountered when trucks travel over high mountain passes or when cargo and feeder aircraft transport packages in non-pressurized or partially-pressurized cargo holds. Both these types of transport methods will result in severe changes in pressure and temperature conditions as compared to packages being transported close to sea-level The testing of packages under these conditions is critical since package integrity may be compromised. The current shipping tests performed in test labs do not account for pressure changes and vibration together. This study showed that combination …

The Quality Problem Solving Method And Its Effectiveness At Nortech Inc., Jeffrey Henderson

Honors Capstones

Capstone submitted as a graduation requirement for the BSU Honors Program.

Application Of Artificial Neural Networks To Sensitivity Analysis And Modeling Of Small Office Buildings, Quan Tang

Dissertations and Theses @ UNI

Sensitivity analysis and Multiple Linear Regression (MLR) are the most extensively used techniques in studying the input-output relationship in building thermal systems. However, both MLR and most methods for sensitivity analysis do not account for nonlinear components embedded in building energy systems. Thus, their results might be distorted.

In this study, the Artificial Neural Networks (ANN) technique was applied to sensitivity analysis and modeling of an imaginary small office in order to (a) examine how the annual energy consumption responded to 40 building design parameters and evaluate relative contributions of these parameters to the variation of the building energy performance, …

The Effect Of Reliability Consideration On The Application Of Quality Index, Hamid Seifoddini, Manocher Djassemi

Industrial Technology and Packaging

Quality index (QI) has been proposed as a screening mechanism for machine-part matrices in the development of cellular manufacturing systems. In this paper the effect of reliability consideration on the application of QI and the relative sensitivity of job shop and cellular manufacturing systems to reliability changes are evaluated by simulation modeling. Performance measures such as mean flow time and work-in-process inventories are used in the comparative study of job shop and cellular manufacturing.

Re-Engineering Of The Quality Assurance Process Using Work Study Methodology, Yew Hoong Chia

Student Works (2000-2009)

This project paper explores the application of Work Study methods to improve the manufacturing processes in the current semiconductor manufacturing environment. The scope of the project is narrowed down to the Quality Assurance Out-going Final Inspection (QA OFI) Gate process step at the End-Of-Line (EOL) Operations in Motorola Malaysia Sendirian Berhad. This QA OFI Gate process step had recently become a bottleneck to the total EOL operations and in need of productivity improvement. It was observed that Work Study methods were not being used extensively or applied in a systematic manner in the company being studied. Many changes were made …

The Determination Of Failure Occurring In The Stator Coil Winding Due To The Over-Voltage Using Matlab Software, Ali Reza Alavizadeh

Morehead State Theses and Dissertations

A thesis presented to the faculty of the College of Science & Technology at Morehead State University in partial fulfillment of the requirements for the degree of Master of Science in Vocational Education & Technology by Ali Reza Alavizadeh on December 1, 2000.

Pre-Inoculation Effect Of Sic In Production Of Thin Wall Ductile Iron Castings, Nikolay Y. Laukhin

Dissertations and Theses @ UNI

Pre-inoculation effect of SiC additions and its effect on castability, microstructure, and magnesium recovery in thin wall ductile iron plates have been studied. Experimental results were compared with alternative FeSi75 furnace pre-inoculation additions.

The first series of experiments aimed to set the baseline of iron quality, when using FeSi75 pre-inoculant

In the second series of experiment, different methods of introduction of Sic into liquid iron were studied. It was established that Sic added into the stream during the tapping into the flow-through chamber or added directly into the flow-through chamber produced lower Si recovery. The most effective method of introduction …

A Strategic Analysis Of Powder Coating Industry In Malaysia : A Case Study Of Ici-Nof Powder Coatings (M) Sdn. Bhd, Meng San Tay

Student Works (2000-2009)

The powder coating industry in Malaysia has increasingly replaced the traditional liquid paints in metal-based industries due to its environmental friend liness, governmental legislation and improved technology. The powder coating industry had grown steadily in the early 1990's in tandem with the Malaysian economic performance. The high growth rate of the industry has attracted new entrants to set up manufacturing plants in the country. However, the unprecedented currency crisis in 1997 has drastically reduced the market size and demand. Faced with an overcapacity scenario, the players are scrambling for market shares by competing heavily in price. The research aims to …

An Efficient Cnc Programming Approach Based On Group Technology, Manocher Djassemi

Industrial Technology and Packaging

Many studies and reports support the significant impact of the application of group technology on various aspects of product design and manufacturing. The fact that group technology is the common solution to similar problems is the main source of such impact. In this paper, one of the less frequently utilized features of CNC technology known as parametric part programming is used to implement the common solution feature of group technology in processing a set of similar parts. Using three part families, the advantages of blending the concept of group technology and parametric programming for CNC machining operations are illustrated. The …

A Parametric Programming Technique For Efficient Cnc Machining Operations, Manocher Djassemi

Industrial Technology and Packaging

In this paper the application of parametric programming to CNC machining is discussed. As one of the less frequently utilized features of CNC machines, parametric programming has the potential to increase the efficiency of CNC operations. This feature is particularly beneficial to companies with group technology manufacturing where parts with similar design or operational requirements are processed within a machine cell. Using two case studies, the capabilities of parametric programming for CNC machines are illustrated.

Determination Of A Flexibility Range For Cellular Manufacturing Systems Under Product Mix Variations, Hamid Seifoddini, Manocher Djassemi

Industrial Technology and Packaging

One of the underlying assumptions in cellular manufacturing is that product mix is relatively stable over time. In this paper, a procedure for the sensitivity analysis of the performance of a cellular manufacturing system with respect to changes in the product mix is presented and a flexibility range representing the capability of the system in dealing with these changes is determined using simulation modelling. The simulation results in this study show that as the changes in the product mix increase the superiority of the performance of the cellular manufacturing system to the corresponding job shop system diminishes.

Minimizing Post-Production Weight Growth In Tanks Using A Decision Analysis Model, Michael F. Cochrane

Engineering Management & Systems Engineering Theses & Dissertations

Post-production weight growth of tanks is an historic problem for the military. Tanks are difficult to transport because of their weight, and post-production modifications tend to cause this weight to increase over the lifecycle of the tank. In this thesis, a computer model is constructed which uses influence diagrams to model tank weight growth as a probabilistic process. Historical weight data for the MI Abrams tank program is used to derive probabilities for the model. The model is used to predict tank weight growth over both the short and long term with the goal of understanding more about how and …

Lithographers' Opinions About Waterless Lithography, Devang Pranlal Mehta

Dissertations and Theses @ UNI

The purposes of this study were to identify the advantages and disadvantages of waterless litho in comparison with traditional litho, to solve the controversial issues, to forecast the growth of waterless litho, and to inform graphic arts professionals about it. The problem of this research was to identify and measure perceived controversial issues for using the waterless litho process. These controversial issues were related to the return on investment and operating costs involved, productivity, quality of images, eco-friendliness, and technical problems associated with waterless litho.

Due to the fact that waterless litho was a developing technology and some controversial issues …

Perceptions Of Businesses On Environmental Regulatory Information, Kimberly K. Gunderson

Dissertations and Theses @ UNI

The purpose of this study was to determine the source and amount of information that a sample of businesses receive on environmental regulatory topics and from what sources they would prefer to receive this information. More specifically, the study demonstrated the discrepancy between the sources from which businesses currently receive their information and the sources from which they would prefer to receive it. The study also addressed how relevant this information was to the businesses and with which regulations the businesses were the most and least knowledgeable. The study was done by conducting a mail-back survey of 500 Iowa small …

The Threshold Value Of A Quality Index For Formation Of Cellular Manufacturing Systems, Hamid Seifoddini, Manocher Djassemi

Industrial Technology and Packaging

The superiority of cellular manufacturing to job shop manufacturing has been questioned by a number of simulation studies. The initial structure of the machine-part matrix seems to play an important role in the failure of cellular manufacturing systems in these studies. In this paper a grouping measure called 'quality index - QI' will be used to evaluate the relationship between the quality of a machine-part matrix and the performance of the corresponding cellular manufacturing system. A simulation study will be conducted to demonstrate how the procedure can be used to determine the threshold value for QI beyond which the cellular …

Digital Rosetta Stone: A Conceptual Model For Maintaining Long-Term Access To Digital Documents, Steven B. Robertson

Theses and Dissertations

Due to the rapid evolution of technology, future digital systems may not be able to read and/or interpret the digital recordings made by older systems, even if those recordings are still in good condition. This thesis addresses the problem of maintaining long-term access to digital documents and provides a methodology for overcoming access difficulties due to technological obsolescence. A review was conducted to determine the long-term access methods that have already been suggested by other researchers. These previously suggested methods are then combined with other ideas that were encountered and conceived while performing research for this project. The combination of …