Operations Research, Systems Engineering and Industrial Engineering Commons^™

An Index To Measure Efficiency Of Hospital Networks For Mass Casualty Disasters, Maria Bull Torres

Electronic Theses and Dissertations

Disaster events have emphasized the importance of healthcare response activities due to the large number of victims. For instance, Hurricane Katrina in New Orleans, in 2005, and the terrorist attacks in New York City and Washington, D.C., on September 11, 2001, left thousands of wounded people. In those disasters, although hospitals had disaster plans established for more than a decade, their plans were not efficient enough to handle the chaos produced by the hurricane and terrorist attacks. Thus, the Joint Commission on Accreditation of Healthcare Organizations (JCAHO) suggested collaborative planning among hospitals that provide services to a contiguous geographic area …

An Empirical Study On Quality Management Practices, Organization Performance And Suppliers' Selection In Southern Minnesota Manufacturing Firms, Rachel Yetunde-Abiodun Awoku

All Graduate Theses, Dissertations, and Other Capstone Projects

Quality management systems (QMS) have been widely applied successfully by many manufacturing companies to improve their process, increase profits and organizational performance. The most applied of the quality programs are ISO 9001, Total Quality Management (TQM), Just-In-time (JIT), Lean Management and Six Sigma. Although past studies on quality management have identified and studied the implementation of quality management practices, there is little or no research on quality management practices and business performance in Southern Minnesota manufacturing companies. Many researchers have concluded that the implementation of quality management practices has led to significant improvements in companies' business performance while others have …

New Mathematical And Evolutionary Optimization Methods To Achieve Fair Division In Multi-Agent Resource Allocation, Emmanuel Gurrola Molina

Open Access Theses & Dissertations

The problem of resource allocation among a group of agents naturally arises in a wide range of real-life events. The subject has earned popularity across the disciplines of Economics, Computer Science, Artificial Intelligence Operations Research and Social Welfare. This resource allocation problem can be commonly referred to as Multi-Agent Resource Allocation (MARA). This work considers a MARA problem where a central agent decides to allocate a set of divisible and non-divisible goods. MARA is considered to be part of an interdisciplinary research area in which the literature is vast and rapidly developing. However, most of the available literature mainly focuses …

Decision Rule Induction For Service Sector Using Data Mining- A Rough Set Theory Approach, Zhonghua Hu

Open Access Theses & Dissertations

Nowadays, data mining is more widely used than ever before; not only by the academic area, but also in the industry and business area. Apart from execution of business processes, the creation of knowledge base and its utilization for the benefit of the organization is becoming a strategy tool to compete. Despite of having ever growing data bases, the problem is that the finance company fails to fully capitalize the true benefits which can be gained from this great wealth of information. The data mining technology instead of classic statistical analysis is developed to help the people to discover the …

Identification Of Rework Station Location To Enhance Reworkability Using Design For Disassembly, Juan Alejandro Saavedra

Open Access Theses & Dissertations

Rework stations are commonly established as part of each assembly stations causing the material flow of the process to be constantly interrupted. Another option is to place the rework station at the end of the production, but this is not cost effective. This breakeven point between reworkability and cost methodology has been proposed in this thesis to identify the location of a single rework station in an assembly line in order to enhance reworkability using the Design for Disassembly (DfD) principles. The methodology uses the 17 guidelines of DfD in a manufacturing scenario in order to propose a reworkability index …

Implementation Of Evolutionary Algorithms On The Power Industry And Aviation Security, Anuar Jesus Aguirre

Open Access Theses & Dissertations

The main objective of the power electric power grid is to supply reliable electricity to all the customers. Customers could be industrial, commercial, household, transportation and others. The power grid is a complex and large, and it formed by the conjunction of the generation, transmission and distribution system. The present research is focused in power distribution system. A new component replacement analysis method to solve component replacement problems for complex electricity distribution systems using Genetic Algorithms is developed. In the present model a Taylor series expansion is used to approximate the associated opportunity cost for each component in the system. …

An Integrated Framework For Freight Forwarders:Exploitation Of Dynamic Information For Multimodal Transportation, Farshid Azadian

Wayne State University Dissertations

Advent of real-time information broadcasting technologies, growth in demand for air-cargo, and increased congestion and variability on air-road network, are the main forces compelling today's air-freight forwarders to improve their operational decision-making to be more competitive and responsive to needs of customers. This research studies the air-cargo transportation on both road (short-haul) and air (long haul) network from the perspective of a mid-size freight forwarder.

We develop a routing algorithm for congestion avoidance on air-network based on historical data and introduce an innovative approach to incorporate real-time information to enable dynamic routing of cargo on a stochastic air-network. In the …

Extending Origami Technique To Fold Forming Of Sheet Metal Products, Ala Qattawi

All Dissertations

This dissertation presents a scientific based approach for the analysis of folded sheet metal products. Such analysis initializes the examination in terms of topological exploration using set of graph modeling and traversal algorithms. The geometrical validity and optimization are followed by utilizing boundary representation and overlapping detection during a geometrical analysis stage, in this phase the optimization metrics are established to evaluate the unfolded sheet metal design in terms of its manufacturability and cost parameters, such as nesting efficiency, total welding cost, bend lines orientation, and maximum part extent, which aides in handling purposes. The proposed approach evaluates the design …

Dock Assignment And Truck Scheduling Problems At Cross-Docking Terminals, Ching-Jung Ting, Amanda G. Rodríguez López

12th IMHRC Proceedings (Gardanne, France – 2012)

In this paper, we consider the integration of dock assignment and truck scheduling problem at cross-docking terminals. The problem is first formulated as a 0-1 integer programming model. Since both dock assignment and truck scheduling problems are NP-hard, its integration is more difficult to solve. Thus we propose reduced variable neighborhood search (RVNS) algorithms to solve the problem. Computational experiments are carried out on four set of instances. The results show that RVNS is capable of finding good solutions in a much shorter computation time when it is compared with optimization solver Gurobi’s solutions.

Investigation Into The Usability Of Micromechanical Models To Predict The Behavior Of A Nanocomposite Polymer, Jason Handlogten

All Graduate Theses, Dissertations, and Other Capstone Projects

The purpose of this thesis was to determine the acceptability of a set of existing nanocomposite test specimens for tensile testing and then to determine the Young's and shear modulus of these test specimens. If the test specimens were found to be acceptable, the accuracy of three micromechanical models was to be evaluated by comparing their predictions to the mechanical properties determined from testing the specimens. The set of existing nanocomposite test specimens had a distinct concave shape on two surfaces that were believed to be intended as flat. In order to determine if they adhered to the Type I …

An Investigation On In-Process Spc Sampling Frequency For Shaft Bearing Turning Process, Jiaxu Chu

Dissertations and Theses @ UNI

The machining processes have the uniqueness of discrete production and flexible scheduling as cellular manufacturing design. To ensure the quality of machining products, control charts for Statistical Process Control (SPC) has been implemented in the company to monitor the machining process. Sampling is an essential part of data collection for SPC control charts and sampling should be done for machining processes becomes an issue in the company.

This study focused on the investigation of SPC sampling frequencies for shaft bearing turning process using the technique of Average Production Length (APL). The purpose of the study was to identify the SPC …

The Design And Evaluation Of Wireless Sensor Networks For Applications In Industrial Locations, Hameed Madwar

Dissertations and Theses @ UNI

In manufacturing industries, there exist many applications where Wireless Sensor Networks (WSN's) are integrated to provide wireless solution for the automated manufacturing processes. It is well known that industrial environments characterized by extreme conditions such as high temperature, pressure, and electromagnetic (EM) interference that can affect the performance of the WSN's. The key solution to overcome this performance issue is by monitoring the received Signal Strength Index (RSSI) at the received sensor of the WSN device and track frame error rate of wireless packets.

ZigBee is a wireless sensor network (WSN) standard designed for specific needs of the remote monitoring …

Using Metarules To Integrate Knowledge In Knowledge Based Systems. An Application In The Woodworking Industry, Alvaro Villavicencio

Dissertations and Theses @ UNI

The current study addresses the integration of knowledge obtained from Data Mining structures and models into existing Knowledge Based solutions. It presents a technique adapted from common KADS and spiral methodology to develop an initial knowledge solution using a traditional approach for requirement analysis, knowledge acquisition, and implementation. After an initial prototype is created and verified, the solution is enhanced incorporating new knowledge obtained from Online Analytical Processing, specifically from Data Mining models and structures using meta rules. Every meta rule is also verified prior to being included in the selection and translation of rules into the Expert System notation. …

Engineering Of A Knowledge Management System For Relational Medical Diagnosis, Maria Carolina Herrera-Hernandez

USF Tampa Graduate Theses and Dissertations

The increasingly high costs of health care in the U.S. have led the general public to search for different medical approaches. Since the 1990's, the use of Complementary and Alternative Medicine (CAM) has radically increased in the U.S. due to its approach to treat physical, mental, and emotional causes of illness. In 2009, the National Health Statistics reported the impact of CAM in the U.S. health care economy, with population expenditures of $14.8 billion out-of-pocket on natural Medicine and $12.4 billion out-of-pocket on visits to CAM providers as a complement to Western Medicine care.

CAM interconnects human functions to reach …

Ethnic Difference In Healthcare Delivery, Benny Mathew Varghese

Department of Industrial and Management Systems Engineering: Dissertations, Theses, and Student Research

Quality in healthcare is a very important aspect; this is obtained when there is proper care provided to the patients without any discrimination. The healthcare system in the US can be improved in the fields of patient’s care, the amount of money spent and proper advice, if proper responsibilities are taken. Quality has been improving over the years, but the median by which there is an increase is too small. The other main factor is access to the healthcare system, which has over the year, has not progressed. Studies in healthcare quality should be conducted on a regular base, so …

Empirical Analysis Of The Relay Network Design Problem, Sergio Maldonado Soria Galvarro

Industrial Engineering Undergraduate Honors Theses

Definition and optimization of alternative methods for truckloads routing.

City Of Industry: Los Efectos Concretos En El Condado De Los Angeles En La Economía, El Medio Ambiente Y La Salud Pública, Christina Andrea Hernandez

World Languages and Cultures

This project attempts to document the development of the City of Industry, located in eastern Los Angeles County, and to examine the environmental as well as socio-economic effects this industrial hub maintains on its surrounding neighborhoods. City of Industry, since its incorporation in 1957, has established an alarming precedent as a privatized city that has informed concrete changes in the local economy, the environment, and the public health of the surrounding communities that are predominantly Latina(o).

The research undertaken for this project represents an interdisciplinary intersection of a special topic in the study of Industrial Engineering: the global logistics industry, …

Simulation-Based Optimisation Model For The Lean Assessment In Sme: A Case Study, Amr Arisha, Amr Mahfouz, John Shea

Conference papers

Due to their space limitation and small production scale, small and medium enterprises (SME) are vulner-able to rapid changes. Lean principles are considered as effective improvement approach to eliminate sys-tem’s waste and inefficiencies. Although much of the academic materials have addressed the lean practic-es into large, global companies, they can still be adjusted to SMEs. Risks are usually associated with lean implementation process due to the drastic required changes in business policies and operations. Simulation can be successfully used to predict the impact of the proposed changes ahead of the implementation which helps to mitigate risks. Integrating simulation with optimization …

Optimal Charging Scheduling For Battery Electric Vehicles Under Smart Grid., Nur Dayana Abd Rahman

Electronic Theses and Dissertations

A projected high penetration of battery electric vehicles (BEV s) in the market will introduce an additional load in the electricity grid. Furthermore, uncontrolled BEV charging from residential users will exacerbate the existing peak load during evening hours. In this thesis, we propose two optimization models to alleviate the impact of extra demand from electric vehicles on the power grid. The first is a centralized charging scheduling model that coordinates the charging among BEV users under the goal of minimizing the total electricity cost for all users. The second model uses a decentralized agent-based approach to scheduling the BEV charging. …

City Of Industry: An Historical Precedent And Its Concrete Effects, Christina A. Hernandez

Liberal Arts and Engineering Studies

No abstract provided.

Adaptive Intensity Modulated Radiation Therapy Planning Optimization With Changing Tumor Geometry And Biology Enforcing Both Cumulative And Fraction Size Dose Constraints, Behlul Saka

Graduate Theses and Dissertations

Intensity Modulated Radiation Therapy (IMRT) is a modern technique of delivering radiation treatments to cancer patients. In IMRT technology, intensities must be chosen for the many small unit grids into which the beams are divided to produce a desired distribution of dose at points throughout the body with the goal of maximizing dose delivered to the tumor while sparing healthy tissues from excessive radiation and keeping dose homogeneous across the tumor. Although IMRT plans are optimized as a single overall treatment plan, they are delivered over 30-50 treatment sessions (fractions) and both cumulative and per-fraction dose constraints apply. The extended …

Inventory Models For Intermittent Highly Variable Demand And Policy Parameter Adjustments To Meet Desired Service Level Requirements, Yasin Unlu

Graduate Theses and Dissertations

This dissertation consists of three assays. The first assay examines the robustness of lead time demand models for the continuous review (r;Q) inventory policy. A number of classic distributions as well as distribution selection rules are examined under a wide variety of demand conditions. First, the models are compared to each other by assuming a known demand process and evaluating the errors associated with using a different model. Then, the models are examined using a large sample of simulated demand conditions. Approximation results of inventory performance measures - ready, rate excepted number of backorders and on-hand inventory levels are reported. …

Integrated Planning For Rural Rail Transportation, Jeffrey Cohan Gwaltney

Graduate Theses and Dissertations

Population growth in rural areas has led to new interest in rail transportation. Planning a passenger rail system involves numerous difficult decisions, most representing a trade-off between customer service and cost. In this work, we attempt to integrate many of these planning decisions. We consider strategic decisions such as station location and vehicle procurement, as well as tactical issues that include vehicle scheduling. Our integrated model exploits the linear network structure that best suits many rural American communities, including Northwest Arkansas. Due to the intractability of the integrated rail planning problem, we have developed a customized heuristic approach to solve …

Economic Analysis Of Continuous Monitoring Of Commercial Truck Tire Pressure Using Tire Pressure Monitoring Systems (Tpms) And Rfid Technologies, Afolabi A. Ogunwemimo

Department of Industrial and Management Systems Engineering: Dissertations, Theses, and Student Research

The trucking industry is a major contributor to the US economy. By providing the essential services of transportation and distribution needed in today’s dynamic industry, the transportation industry has evolved into an integral player in various supply chains. The trucking industry is the largest transportation provider for other industries and employs 10.1 million workers in the United States (ATA, 2003).

This research is an analysis of the economic impact of maintaining proper air pressure in the tires of commercial trucks. Various studies have been carried out on understanding the relationship between tire pressure and fuel consumption (National Research Council, 2006). …

Electronic Monitoring Of Hand Hygiene Compliance In An Inpatient Hospital Setting, Christopher M. Masek

Department of Industrial and Management Systems Engineering: Dissertations, Theses, and Student Research

Proper hand hygiene is known to reduce hospital acquired infections. Currently the most widely accepted method used to measure hand hygiene compliance is through direct observation. This method often provides data that may not accurately represent true hand hygiene compliance due to such factors such as the Hawthorne Effect. Perhaps a better approach is to use counting devices to capture hand hygiene opportunities and activities. This thesis focuses on the measurement of hand hygiene activities of all individuals that either work or visit an inpatient medical ward including healthcare workers, patients and visitors at the patient’s bedside for non-isolation patients. …

A Study Of Solder Joint Failure Criteria, Jianbiao Pan, Julie Silk

Industrial and Manufacturing Engineering

One of the challenges in an experimental study of solder joint reliability is to determine when cracks occur in a solder joint or when a solder joint fails. Cracks in a real solder joint are difficult to identify using an X-Ray system. Cross-sectioning and scanning electron microscopy (SEM) is a destructive method. A common non-destructive test method is to monitor resistance increase in a solder joint or a daisy-chain. However, no scientific research has been done in establishing the relationship between the crack area of an interconnection and the change in resistance of the interconnection. This paper proposes a method …

Selection Of Temperature Measuring Sensors Using The Analytic Hierarchy Process, Shadi Mohammad Al-B'Ool

Systems Science and Industrial Engineering Faculty Scholarship

This study presents an analytic hierarchy process (AHP) method to objectively select the best temperature sensor from among different alternative sensors in a certain industrial application. The underlying decision method based on AHP methodology, ranks temperature sensors with different features with a score resulting from the synthesis of relative preferences of each alternative with respect to the others at different levels considering independent evaluation criteria and sub-criteria. At each level, relative preferences of each candidate alternative with respect to the upper immediate level are calculated from pair-wise comparisons among the candidate alternative sensors with respect to a selected application. Pair-wise …

Effect Of Gold Content On The Reliability Of Snagcu Solder Joints, Jianbiao Pan, J. Silk, M. Powers, P. Hyland

Industrial and Manufacturing Engineering

Electroplated Ni/Au over Cu is a popular metallization for printed circuit board finish as well as for component leads, especially wire-bondable high-frequency packages, where the gold thickness requirement for wire bonding is high. The general understanding is that less than 3 wt% of Au is acceptable in SnPb solder joints. However, little is known about the effect of Au content on the reliability of SnAgCu solder joints. The purpose of this paper is to determine the acceptable level of Au in SAC305 solder joints. Three different package platforms with different Au thicknesses were assembled on boards with two different Au …

Revised Reference Curves For Bone Mineral Content And Areal Bone Mineral Density According To Age And Sex For Black And Non-Black Children: Results Of The Bone Mineral Density In Childhood Study, Babette S. Zemel, Heidi J. Kalkwarf, Vicente Gilsanz, Joan M. Lappe, Sharon Oberfield, John A. Shepherd, Margaret M. Frederick, Xangke Huang, Ming Lu, Soroosh Mahboubi, Thomas N. Hangartner, Karen K. Winer

Biomedical, Industrial & Human Factors Engineering Faculty Publications

Context: Deficits in bone acquisition during growth may increase fracture risk. Assessment of bone health during childhood requires appropriate reference values relative to age, sex, and population ancestry to identify bone deficits.

Objective: The objective of this study was to provide revised and extended reference curves for bone mineral content (BMC) and areal bone mineral density (aBMD) in children.

Design: The Bone Mineral Density in Childhood Study was a multicenter longitudinal study with annual assessments for up to 7 yr.

Setting: The study was conducted at five clinical centers in the United States.

Participants: Two thousand fourteen healthy children (992 …

Supply Chain And Logistics Technology Investment In Small And Medium-Sized Enterprises, Edward Sweeney

Practitioner Journals

No abstract provided.