Operations Research, Systems Engineering and Industrial Engineering Commons^™

An Investigation Into The Analysis Of Truncated Standard Normal Distributions Using Heuristic Techniques, John Walter Ralls

Engineering Management & Systems Engineering Theses & Dissertations

Standard normal distributions (SND) and truncated standard normal distributions (TSND) have been widely used and accepted methods to characterize the data sets in various engineering disciplines, financial industries, medical fields, management, and other mathematic and scientific applications. For engineering managers, risk managers and quality practitioners, the use of the standard normal distribution and truncated standard normal distribution have particular relevance when bounding data sets, evaluating manufacturing and assembly tolerances, and identifying measures of quality. In particular, truncated standard normal distributions are used in areas such as component assemblies to bound upper and lower process specification limits.

This dissertation presents a …

Statistical And Prognostic Modeling Of Clinical Outcomes With Complex Physiologic Data, Monica A. Puertas

USF Tampa Graduate Theses and Dissertations

Laboratory tests are a primary resource for diagnosing patient diseases. However, physicians often make decisions based on a single laboratory result and have a limited perspective of the role of commonly-measured parameters in enhancing the diagnostic process. By providing a dynamic patient profile, the diagnosis could be more accurate and timely, allowing physicians to anticipate changes in the recovery trajectory and intervene more effectively.

The assessment and monitoring of the circulatory system is essential for patients in intensive care units (ICU). One component of this system is the platelet count, which is used in assessing blood clotting. However, platelet counts …

A Control-Chart Based Method For Solder Joint Crack Detection - Conference Proceeding, Jianbiao Pan

Industrial and Manufacturing Engineering

Many researchers have used different failure criteria in the published solder joint reliability studies. Since the reported time-to-failure would be different if different failure criteria were used, it would be difficult to compare the reported reliability life of solder joints from one study to another. The purpose of this study is to evaluate the effect of failure criteria on the reported thermal fatigue life and find out which failure criterion can detect failure sooner. First, the application of the control-chart based method in a thermal cycling reliability study is described. The reported time-to-failure data were then compared based on four …

Design Of Transportation Process For Band Equipment, Marissa N. Blustein, Chris M. Kaye

Industrial and Manufacturing Engineering

The following report documents the attempt to design a safe and reliable process for transporting Louder Space’s musical gear that requires minimal physical demand. Design specifications were derived from customer requirements as well as human factors principles. The transportation process was broken down into systematic process steps and standardized, making use of lean methodologies in order to reduce the number of non-value steps involved. Furthermore, a model portable storage unit for miscellaneous gear was developed to the specifications determined by the band using 3D modeling, as well as certain limiting constraints. Once the customer approved the prototype, the product was …

Extracting Product Development Intelligence From Web Reviews, Ismail Artun Yagci

Dissertations

Product development managers are constantly challenged to learn what the consumer product experience really is, and to learn specifically how the product is performing in the field. Traditionally, they have utilized methods such as prototype testing, customer quality monitoring instruments, field testing methods with sample customers, and independent assessment companies. These methods are limited in that (i) the number of customer evaluations is small, and (ii) the methods are driven by a restrictive structured format. Today the web has created a new source of product intelligence; these are unsolicited reviews from actual product users that are posted across hundreds of …

Performance Analysis And Scheduling Strategies For Ambulatory Surgical Facilities, Xuanqi Zhang

Dissertations

Ambulatory surgery is a procedure that does not require an overnight hospital stay and is cost effective and efficient. The goal of this research is to develop an ASF operational model which allows management to make key decisions. This research develops and utilizes the simulation software ARENA based model to accommodate: (a) Time related uncertainties – Three system uncertainties characterize the problem (ii) Surgery time variance (ii) Physician arrival delay and (iii) Patient arrival delay; (b) Resource Capture Complexities – Patient flows vary significantly and capture/utilize both staffing and/or physical resources at different points and varying levels; and (c) Processing …

Optimal Dredge Fleet Scheduling Within Environmental Work Windows, Heather Nachtmann, Kenneth N. Mitchell, Chase Rainwater, Ridvan Gedik, Edward A. Pohl

Mechanical and Industrial Engineering Faculty Publications

The U. S. Army Corps of Engineers oversees dredging in hundreds of navigation projects annually, through its fleet of government equipment and through individual contracts with private industry. The research presented here sought to examine the decision to allocate dredge resources to projects systemwide under necessary constraints. These constraints included environmental restrictions on when dredging could take place in response to the migration patterns of turtles, birds, fish, and other wildlife; dredge equipment resource availability; and varying equipment productivity rates that affected project completion times. The paper discusses problem definition and model formulation of optimal dredge fleet scheduling within environmental …

A Framework For The Development Of A Model For Successful, Sustained Lean Implementation And Improvement, Julie Sisson

Electronic Theses and Dissertations

Lean is a business philosophy focused on shortening lead times by removing waste and concentrating on value-added processes. When implemented successfully, it not only allows for cost reduction while improving quality, but it can also position a company to achieve tremendous growth. The problem is that though many companies are attempting to implement lean, it is estimated that only 2-3% are achieving the desired level of success. The purpose of this research is to identify the key interrelated components of successful lean transformation. To this end, a thorough literature review was conducted and the findings indicate six key constructs that …

Facilitating Information Retrieval In Social Media User Interfaces, Anthony Costello

Electronic Theses and Dissertations

As the amount of computer mediated information (e.g., emails, documents, multi-media) we need to process grows, our need to rapidly sort, organize and store electronic information likewise increases. In order to store information effectively, we must find ways to sort through it and organize it in a manner that facilitates efficient retrieval. The instantaneous and emergent nature of communications across networks like Twitter makes them suitable for discussing events (e.g., natural disasters) that are amorphous and prone to rapid changes. It can be difficult for an individual human to filter through and organize the large amounts of information that can …

An Analytics Approach To Designing Patient Centered Medical Home, Saeede Ajorlou

Wayne State University Dissertations

Recently the patient centered medical home (PCMH) model has become a popular team based approach focused on delivering more streamlined care to patients. In current practices of medical homes, a clinical based prediction frame is recommended because it can help match the portfolio capacity of PCMH teams with the actual load generated by a set of patients. Without such balances in clinical supply and demand, issues such as excessive under and over utilization of physicians, long waiting time for receiving the appropriate treatment, and non continuity of care will eliminate many advantages of the medical home strategy. In this research, …

An Analytics Approach To Reducing Hospital Readmission, Issac Shams

Wayne State University Dissertations

One of the significant sources of waste in the Unites States health care systems is preventable hospital readmission. About 2.3 million Medicare fee-for-service beneficiaries are re-hospitalized within 30 days after discharge which incurs an annual cost of $17 billion. However, it is reported by the Medicare Payment Advisory Commission that about 75% of such readmissions can and should be avoided because they are the results of factors such as poor planning for follow up care transitions, inadequate communication of discharge instructions, and failure to reconcile and coordinate medications. Hence, reducing unnecessary rehospitalization through care transition and systems engineering principles has …

Improving Emergency Department Patient Flow Through Near Real-Time Analytics, Shanshan Qiu

Wayne State University Dissertations

ABSTRACT

IMPROVING EMERGENCY DEPARTMENT PATIENT FLOW THROUGH NEAR REAL-TIME ANALYTICS

This dissertation research investigates opportunities for developing effective decision support models that exploit near real-time (NRT) information to enhance the "operational intelligence" within hospital Emergency Departments (ED). Approaching from a systems engineering perspective, the study proposes a novel decision support framework for streamlining ED patient flow that employs machine learning, statistical and operations research methods to facilitate its operationalization.

ED crowding has become the subject of significant public and academic attention, and it is known to cause a number of adverse outcomes to the patients, ED staff as well as …

Data Mining Based Hybridization Of Meta-Raps, Fatemah Al-Duoli, Ghaith Rabadi

Engineering Management & Systems Engineering Faculty Publications

Though metaheuristics have been frequently employed to improve the performance of data mining algorithms, the opposite is not true. This paper discusses the process of employing a data mining algorithm to improve the performance of a metaheuristic algorithm. The targeted algorithms to be hybridized are the Meta-heuristic for Randomized Priority Search (Meta-RaPS) and an algorithm used to create an Inductive Decision Tree. This hybridization focuses on using a decision tree to perform on-line tuning of the parameters in Meta-RaPS. The process makes use of the information collected during the iterative construction and improvement phases Meta-RaPS performs. The data mining algorithm …

Systems Theory As The Foundation For Understanding Systems, Kevin Macg. Adams, Peggy T. Hester, Joseph M. Bradley, Thomas J. Meyers, Charles B. Keating

Engineering Management & Systems Engineering Faculty Publications

As currently used, systems theory is lacking a universally agreed upon definition. The purpose of this paper is to offer a resolution by articulating a formal definition of systems theory. This definition is presented as a unified group of specific propositions which are brought together by way of an axiom set to form a system construct: systems theory. This construct affords systems practitioners and theoreticians with a prescriptive set of axioms by which a system must operate; conversely, any set of entities identified as a system may be characterized by this set of axioms. Given its multidisciplinary theoretical foundation and …

A Heuristic For The Analysis Of Truncated Standard Normal Distribution Assemblies, John Walter Ralls, Cesar Ariel Pinto, Shannon R. Bowling, Resit Unal, Charles B. Daniels, S. Long (Ed.), E.H. Ng (Ed.), C. Downing (Ed.)

Engineering Management & Systems Engineering Faculty Publications

The analysis of data sets and process conditions commonly assume the use of standard normal distributions and truncated standard normal distributions (TSND). The use of these distributions has application to various engineering disciplines along with numerous other industries (e.g., financial industries, medical fields, management, etc.). For engineering managers, the use of truncated standard normal distributions has particular relevance when evaluating process conditions commonly associated with assembly tolerances, manufacturing, and associated measures of quality. This article summarizes a heuristic approach for the analysis of assembly-level truncated standard normal distributions and associated research from a recent dissertation (Ralls, 2014). This article provides …

Model-Based Systems Engineering Approach To Distributed And Hybrid Simulation Systems, John Pastrana

Electronic Theses and Dissertations

INCOSE defines Model-Based Systems Engineering (MBSE) as "the formalized application of modeling to support system requirements, design, analysis, verification, and validation activities beginning in the conceptual design phase and continuing throughout development and later life cycle phases." One very important development is the utilization of MBSE to develop distributed and hybrid (discrete-continuous) simulation modeling systems. MBSE can help to describe the systems to be modeled and help make the right decisions and partitions to tame complexity. The ability to embrace conceptual modeling and interoperability techniques during systems specification and design presents a great advantage in distributed and hybrid simulation systems …

A Framework Of Critical Success Factors For Business Organizations That Lead To Performance Excellence Based On A Financial And Quality Systems Assessment., Melissa Francisco

Electronic Theses and Dissertations

One of the most important tasks that business leaders undertake in order to achieve a superior market position is strategic planning. Beyond this obligation, business owners desire to maximize profit and maintain steady growth. In order to do this, resources must be invested in the most efficient way possible in order to achieve performance excellence. Adjusting business operations quickly, however, especially in times of economic uncertainty, is extremely difficult. Business leaders therefore need insight into which elements of organizational improvement are most effective in order to strategically invest their resources to achieve superior performance in the most efficient way possible. …

Shop Scheduling In The Presence Of Batching, Sequence-Dependent Setups And Incompatible Job Families Minimizing Earliness And Tardiness Penalties, Patricia Buchanan

Electronic Theses and Dissertations

The motivation of this research investigation stems from a particular job shop production environment at a large international communications and information technology company in which electro-mechanical assemblies (EMAs) are produced. The production environment of the EMAs includes the continuous arrivals of the EMAs (generally called jobs), with distinct due dates, degrees of importance and routing sequences through the production workstations, to the job shop. Jobs are processed in batches at the workstations, and there are incompatible families of jobs, where jobs from different product families cannot be processed together in the same batch. In addition, there are sequence-dependent setups between …

Successful Organizational Change: Aligning Change Type With Methods, Serina Al-Haddad

Electronic Theses and Dissertations

The motivation behind this research is the prevalence of challenges and ambiguity associated with successful organizational change and the numerous available approaches in dealing with these challenges and ambiguity. Many definitions and methods have been suggested to manage change; however, organizations still report a high failure rate of their change initiatives. These high failure rates highlight the continuing need for research and investigation, and imply a lack of a valid framework for managing successful organizational change. This dissertation critically reviews the concept of having one change approach as the “silver-bullet”. In pursuit of this goal, this research contributes a roadmap …

Inventory Management Problem For Cold Items With Environmental And Financial Considerations, Ali Hajiaghabozorgi

Electronic Theses and Dissertations

The overarching theme of this dissertation is analytically analyzing the cold supply chain from a financial and environmental perspective. Specifically, we develop inventory policy models in the cold supply chain that consider holding and transportation unit capacities. The models provide insights for the decision maker on the tradeoff between setting order quantities based on the cost or the emission function. In Chapter 2, we review two major bodies of literature: 1) supply chain design, and 2) sustainability in supply chain design. We benefit from this literature review to map the current body of research on traditional supply chain for further …

A Framework For Assessing The Quality And Effectiveness Of A National Employment System: A Case Study Of Saudi Arabia, Hemaid Alsulami

Electronic Theses and Dissertations

National employment systems have been established in several countries to tackle the unemployment dilemma between citizens while the labor market flooded by expatriates. Lack of performance measurement indices among these systems caused failure to provide jobs to citizens and caused a state of confusion and dissatisfaction among employing entities. In Saudi Arabia, unemployment rate has increased in the last few decades and have since become a very political issue for the Saudi government. Compared to other countries, the problem is different since many expatriates in Saudi Arabia are already employed in their markets while citizens are seeking jobs. In Saudi …

Interpolation-Based Super-Resolution Reconstruction: Effects Of Slice Thickness, Amir Pasha Mahmoudzadeh, Nasser H. Kashou

Biomedical, Industrial & Human Factors Engineering Faculty Publications

Standard clinical magnetic resonance imaging (MRI) is acquired in two-dimensions where the in-plane resolution is higher than the slice select direction. These acquisitions include axial, coronal, and sagittal planes. To date, there have been few attempts to combine the information of these three orthogonal orientations. This paper aims to take advantage of the different in-plane resolution acquired from each plane orientation and combine them into one volume in order to attain a higher resolution image. This combination of MRI data will allow the detection of smaller areas that would otherwise be missed using only one slice orientation. A comparison of …

An Unsupervised Consensus Control Chart Pattern Recognition Framework, Siavash Haghtalab

Electronic Theses and Dissertations

Early identification and detection of abnormal time series patterns is vital for a number of manufacturing. Slide shifts and alterations of time series patterns might be indicative of some anomaly in the production process, such as machinery malfunction. Usually due to the continuous flow of data monitoring of manufacturing processes requires automated Control Chart Pattern Recognition(CCPR) algorithms. The majority of CCPR literature consists of supervised classification algorithms. Less studies consider unsupervised versions of the problem. Despite the profound advantage of unsupervised methodology for less manual data labeling their use is limited due to the fact that their performance is not …

An Instrument To Assess Individual Capacity For System Thinking, Ra'ed M. Jaradat

Engineering Management & Systems Engineering Theses & Dissertations

The purpose of this research was to develop and deploy a new systems thinking instrument to assess individual capacity for systems thinking using an inductive research design. While technology has been increasing exponentially, the corresponding methods to harness those technological advances, and the problems they have spawned, is lagging. While there is a broad collection of systems based methods, techniques, technologies, and tools that can be used in dealing with complex problems, these are predicated on an individual's capacity for engaging a level of systems thinking commensurate with their effective, deployment. Research based methods to determine individual capacity for systems …

การลดสิ่งแปลกปลอมในกระบวนการสร้างเส้นลายวงจรในโรงงานผลิตแผงวงจรไฟฟ้าชนิดอ่อน, ปิยะนันท์ สยนานนท์

Chulalongkorn University Theses and Dissertations (Chula ETD)

งานวิจัยนี้มีวัตถุประสงค์เพื่อลดปริมาณของเสียที่เกิดจากปัญหาสิ่งแปลกปลอมในกระบวนการสร้างเส้นลายวงจรในโรงงานผลิตแผงวงจรไฟฟ้าชนิดอ่อน โดยการประยุกต์ใช้แนวคิด ซิกซ์ ซิกมา งานวิจัยเริ่มจากการนิยามปัญหาสิ่งแปลกปลอมในกระบวนการสร้างเส้นลายวงจร การวัดเพื่อกำหนดสาเหตุของปัญหาได้เลือกปัจจัยนำเข้าหลักมาพิสูจน์ความมีนัยสำคัญ การวิเคราะห์สาเหตุของปัญหาโดยการประยุกต์ใช้การออกแบบการทดลองเชิงแฟคทอเรียลแบบ 2 ระดับ (2k Factorial Design) เพื่อศึกษาอิทธิพลของปัจจัยที่มีผลต่อการทำให้เกิดของเสีย โดยพบว่ามี 3 ปัจจัยหลักที่เกี่ยวข้องกับของเสียที่เกิดขึ้น คือ ความเข้มของแสง UV ในกระบวนการถ่ายเส้นลายวงจร ความเข้มข้นของสารละลายโซเดียมไฮดรอกไซด์ และอุณหภูมิของสารละลายโซเดียมไฮดรอกไซด์ในกระบวนการลอกลายเส้นลายวงจร ซึ่งเมื่อทําการทดลองเพื่อหาระดับปัจจัย สรุปได้ว่าระดับของปัจจัยที่เหมาะสมในการลดปัญหาสิ่งแปลกปลอม คือ ความเข้มของแสง UV 50 mJ/cm2 ในกระบวนการถ่ายเส้นลายวงจร อุณหภูมิของสารละลายโซเดียมไฮดรอกไซด์ 48°C และ ความเข้มข้นของสารละลายโซเดียมไฮดรอกไซด์ 3.5%wt ในกระบวนการลอกลายเส้นลายวงจร จากนั้นจึงกำหนดแผนการควบคุมตัวแปรต่างๆ โดยจัดทำเป็นมาตรฐานวิธีการปฏิบัติงาน ผลหลังการปรับปรุงพบว่าค่าเฉลี่ยของเสียลดลงจาก 0.27% เหลือเพียง 0.004% โดยการประเมินปริมาณการผลิตคาดว่ามูลค่าความสูญเสียจะลดลงได้ถึง 336,770 บาทต่อเดือน

Rheological Model Of Force Transmission Through The Helmet And Concussion Sensitivity, Isiah Kendall, Anthony Vicini, Tarun Goswami

Biomedical, Industrial & Human Factors Engineering Faculty Publications

In contact sports, head-to-head collisions can lead to concussions, which pose serious health risks to players. This research aims to understand the force transfer from the helmet to the brain that causes concussions in collisions using a rheological model. Experimental data was gathered from players in the National Football League and testing of one type of helmet and padding. The rheological model was verified with published data and good correlation was achieved. Further sensitivity analysis of concussion risk was performed with respect to force, body weight, mass, and impact duration fit to normal and Weibull distributions using Monte Carlo simulations …

Positioning Automated Guided Vehicles In A General Guide-Path Layout, Abraham Mendoza, Jose A. Ventura

13th IMHRC Proceedings (Cincinnati, Ohio. USA – 2014)

The locations of dwell points for idle vehicles in an automated guided vehicle (AGV) system determine the response times for pick-up requests and thus affect the performance of automated manufacturing systems. In this study, we address the problem of optimally locating dwell points for multiple AGVs in general guide-path layouts with the objective of minimizing the maximum response time in the system. We propose a mixed integer linear programming (MILP) formulation for the problem. We also develop a generic genetic algorithm (GA) to find near optimal solutions. The MILP model and GA procedure are illustrated using a two-dimensional grid layout …

Integrating Analysis Into A Warehouse Design Workflow, Leon Mcginnis, Timothy Sprock

13th IMHRC Proceedings (Cincinnati, Ohio. USA – 2014)

Supply chain analyses, including those related to material handling systems, are typically purpose-built to answer specific questions and therefore have many different implementations depending on the question, the instance data, and the solver. The purpose-built nature of these models makes it difficult to integrate them into an iterative design workflow. Despite the myriad analysis implementations, the fundamental structure of these systems and their problem domain remains unchanged, suggesting that perhaps analyses could be automatically generated on demand, given an appropriate specification of the particular system to be analyzed. We apply model-based systems engineering (MBSE) methodologies to explore this possibility in …

Throughput Analysis Of S/R Shuttle Systems, Georg Kartnig, Jörg Oser

13th IMHRC Proceedings (Cincinnati, Ohio. USA – 2014)

Shuttle systems are used in high performance automated storage/retrieval unit load systems. Each storage level is serviced by one transfer car travelling in dual command operation. One buffer slot is located at both ends of each level. This decouples horizontal travel from vertical input/output moves, which in this case requires two independent vertical reciprocating lifts at each end of the aisle. Other systems work with only one lift used in lower throughput applications. The content of this paper is treated in the following sections starting with a problem definition and a literature survey. This is followed by a detailed functional …

Variation In Lifting Behavior During A Highly Repetitive Manual Material Task, Steven A. Lavender

13th IMHRC Proceedings (Cincinnati, Ohio. USA – 2014)

Presenters will provide.