Nanoscience and Nanotechnology Commons^™

A Rechargeable Metal-Co2 Battery Using Lower-Cost Materials, Chris Fetrow

Nanoscience and Microsystems ETDs

High energy density, low-cost chemical conversion batteries are widely studied for their potential application to applications in which current battery technologies are unsuitable replacements for fossil fuel-powered systems. The demonstration of rechargeable chemical conversion batteries, and particularly batteries without the fatal flaw of high overpotential due to the difficulties inherent to chemical conversion reactions, is of great interest to further both this aim. In this work, a secondary Al-CO2 battery was demonstrated using a homogeneous aluminum iodide redox mediator to enable the battery’s discharge and charge at a high energy density and a low overpotential of 0.05 Volts. The operation …

A Multi-Material Platform For Imaging Of Single Cell-Cell Junctions Under Tensile Load Fabricated With Two-Photon Polymerization, Jordan Rosenbohm, Grayson Minnick, Bahareh Tajvidi Safa, Amir M. Esfahani, Xiaowei Jin, Haiwei Zhai, Nickolay V. Lavrik, Ruiguo Yang

Department of Mechanical and Materials Engineering: Faculty Publications

We previously reported a single-cell adhesion micro tensile tester (SCAμTT) fabricated from IP-S photoresin with two-photon polymerization (TPP) for investigating the mechanics of a single cell-cell junction under defined tensile loading. A major limitation of the platform is the autofluorescence of IP-S, the photoresin for TPP fabrication, which significantly increases background signal and makes fluorescent imaging of stretched cells difficult. In this study, we report the design and fabrication of a new SCAμTT platform that mitigates autofluorescence and demonstrate its capability in imaging a single cell pair as its mutual junction is stretched. By employing a two-material design using IP-S …

Nanozyme: Combining Power Of Natural Enzymes And Artificial Catalysis, Peng Du, Lizeng Gao, Jian Jiao, Kelong Fan, Xiyun Yan

Bulletin of Chinese Academy of Sciences (Chinese Version)

Nanozymes represent a novel class of artificial enzymes and biocatalysts, possessing both the physical and chemical properties of nanomaterials along with unique enzyme-like catalytic activities, which breaks the boundary between inorganic materials and organic life. Unlike natural enzymes, traditional enzyme mimics and chemical catalysts, nanozymes exhibit catalytic activity that can be regulated by their nanoscale physical and chemical properties. They are characterized by good stability, high- and lowtemperature resistance, acid and alkali resistance, adjustable activity, and multifunctionality. As a result, nanozymes have garnered widespread attention in the fields of biomedicine, environment treatment, green agriculture, new energy resources, and have begun …

Plasma Ion Source, Nathan K. Davis

Student Research Symposium

It is well known that a plasma can be created with both high input power and ultra low pressure. The challenge is in creating these same plasma characteristics with both lower power while maintaining a higher pressure. We have developed an ion beam by careful manipulation of magnetic and electric fields. Magnetic fields are used to accelerate ambient electrons to ionize the low pressure gas into a plasma. Electric fields are used to extract the ions into a focused beam. To achieve these initial ionizations, an artificial vacuum is created to reach low enough pressures to ionize the gas. A …

Fabrication Of Two-Dimensional Material-Based Nano-Capacitors Using Bismuth Selenite (Bi2seo5) To Study Its Dielectric Properties, Major Kc

McKelvey School of Engineering Graduate Student Theses & Dissertations

In recent years, the demand for high-performance micro and nanodevices has surged, necessitating the exploration of novel dielectric materials to replace conventional silicon dioxide. Following the continuation of the Moorse law, as device dimensions reduce to nanoscale levels, the properties of silicon dioxide can degrade, leading to issues such as increased leakage current and reduced gate control. Materials with superior electrical properties, such as higher dielectric constant, lower leakage current, and better thermal stability allowing for the development of faster, more efficient, and more reliable devices are in higher demand than ever. Two-dimensional layered semiconductor nanomaterials represented by compounds such …

Crystalline Colloidal Arrays: Exploring Light-Matter Interactions, Haley W. Jones

All Dissertations

Understanding and manipulating quantum light-matter interactions, especially in the context of nanostructured environments, is highly critical for technological progress and inventive solutions in the fields of telecommunications, energy-efficient lighting, and cutting-edge quantum computing technologies. The fundamental interactions of photons with a surrounding environment directly impact the performance and efficiency of devices such as lasers, light-emitting diodes (LEDs), and quantum computing elements, which leverage the unique properties of confined structured environments. Since the late 1980s, the connection between a structured environment and the decay kinetics of an embedded fluorophore has been a highly debated and unresolved topic in the literature. More …

Electrokinetic Particle Trapping Performance Of Conductive Nanofiber Mats In Microfluidic Wells., Jacob Hunter West

Electronic Theses and Dissertations

The frequency dependence of electrokinetic particle trapping using large-area (>mm²) conductive carbon nanofiber (CNF) mat electrodes is investigated. The fibers provide nanoscale geometric features for the generation of high electric field gradients, which is necessary for particle trapping via dielectrophoresis (DEP). A device was fabricated with an array of microfluidic wells for repeated experiments; each well included a CNF mat electrode opposing an aluminum electrode. Fluorescent microspheres (1 µm) were trapped at various electric field frequencies between 30 kHz – 1 MHz. Digital images of each well were analyzed to quantify particle trapping. DEP trapping by the …

Encapsulated 2d Materials And The Potential For 1d Electrical Contacts, Sarah Wittenburg

Physics Undergraduate Honors Theses

The utilization of two-dimensional materials and heterostructures, particularly graphene and hexagonal boron nitride, have garnered significant attention in the realm of nanoelectronics due to their unique properties and versatile functionalities. This study focuses on the synthesis and fabrication processes of monolayer graphene encapsulated between layers of hBN, aiming to explore the potential of these heterostructures for various electronic applications. The encapsulation of graphene within hBN layers not only enhances device performance but also shields graphene from environmental contaminants, ensuring long-term stability. Experimental techniques, including mechanical exfoliation and stamp-assisted transfer, are employed to construct three-layer stacks comprising hBN-graphene-hBN. The fabrication process …

Optimization And Fabrication Of Semiconductor Power Devices On 4h-Sic, Justin M. Lynch

Legacy Theses & Dissertations (2009 - 2024)

The work presented in this document focuses on the design, optimization, and fabrication of power devices on 4H-Silicon Carbide (SiC) substrates. Power devices convert or control electric power flow and are the main components of electronic power systems worldwide. Power electronic systems are used in both low-power and high power settings, including prevalent applications such as fast charging set-ups for personal electronic devices, electric vehicle motor drives, and renewable energy storage and grid connections. With a wide spread of applications and the further electrification of our society on the horizon, it is crucial to minimize the power loss of power …

Toward The Advancement Of High-Efficiency P-Type Doping In Iii-Nitrides: Novel Beryllium Doping Techniques, Benjamin Arthur Mcewen

Legacy Theses & Dissertations (2009 - 2024)

The III-nitride material system is well-suited to a broad range of applications in light emitting diodes and laser diodes, photodetectors, power management, and telecommunications. Much of III-nitrides’ utility derives from their direct, wide, and tunable bandgap, but it is their ability to be doped n- and p-type that makes them especially useful and attractive. However, despite the decades of academic interest and commercial success, p-type doping in III-nitrides is infamously difficult and inefficient. Magnesium, the only currently viable p-type dopant in III-nitrides, is not a shallow acceptor, and as a result, the activation efficiency of Mg in GaN is only …

Design And Fabrication Of Injectable Alginate Hydrogel Microstrands For Mesenchymal Stem Cell Delivery In Salivary Gland Tissue Regeneration, Sujith Chander Reddy Kollampally

Legacy Theses & Dissertations (2009 - 2024)

Fibrosis is a pathological wound healing process, driven by excessive accumulation of extracellular matrix (ECM) following tissue remodeling. Fibrosis occurs in diseased or damaged salivary glands caused by several conditions, such as Sjogren’s syndrome or radiation for head and neck cancers. Having better insight into the cellular and molecular progression of fibrosis will allow us to model new therapeutic approaches as fibrosis prevents salivary gland tissue regeneration and function. Pharmacological, tissue engineering and cell-based regeneration strategies have been widely explored to restore lost salivary gland function. Among cell-based therapies, exploitation of mesenchymal stromal/stem cells (MSC) for salivary gland regeneration has …

Biophysical Model Of Retraction Motor Neurons And Their Modification By Operant Conditioning, Maria Rasheed

Dissertations and Theses (Open Access)

Operant conditioning (OC) is a form of associative learning in which an animal modifies its behavior based on the consequences that follow that behavior. Despite its ubiquity, the underlying mechanisms of OC are poorly understood. Insights into the mechanisms of OC can be obtained by studying Aplysia feeding behavior as it can be modified by OC. This behavior is mediated by a central pattern generator (CPG) network in the buccal ganglia that contains a relatively small number of neurons. This CPG generates rhythmic motor patterns (BMPs) that move food into the gut by closing a tongue-like structure (i.e., radula) during …

Electrochemical Syntheses Of Aryl-Substituted Benzothiophenes And Phenanthrenes Using Benzenediazonium Salts As The Aryl Radical Precursors, Li-Yuan Lan, Yang-Ye Jiang, Raymond Daniel Little, Cheng-Chu Zeng

Journal of Electrochemistry

Aryl-substituted benzothiophene and phenanthrene are important structural units in medicinal chemistry and materials science. Although extensive effort has been devoted to prepare these compounds and a variety of approaches have been developed to construct the 2-substituted benzothiophene core structure, environmental-friendly and efficient synthetic means are still desired. Based on our previous electrochemical Minisci-type arylation reaction with aryl diazonium salt as the aryl precursor, as well as the work from König’s group, herein, we described the use of paired electrolysis to achieve 2-aryl benzothiophenes and 9-aryl phenanthrenes employing benzenediazonium salts as the aryl radical precursors. Initially, 2-methylthiobenzendiazonium salt 1a and 4-methylbenzene …

Electrochemical Advanced Treatment Of Desulfurization Wastewater From Coal-Fired Power Plants, Ju-Cai Wei, Juan Yi, Xu Wu

Journal of Electrochemistry

Zero-emission of desulfurization wastewater is one of the main demands for coal-fired power plants. As typical high salinity wastewater, it is hard to purify the desulfurization wastewater from coal-fired power plants through traditional physicochemical treatment or biochemical treatment, e.g., COD and Cl^–. A high concentration of Cl^– ion in desulfurization wastewater restricts wastewater reuse and zero-emission. Electrochemical technology is an attractive method for high salinity wastewater zero-emission, which provides a versatile, efficient, cost-effective, easily automatable, and clean industrial process. For advanced treatment of effluent after triple box process treatment in power plants, this paper reports an electrochemical …

Electrocatalytic Cyclopropanation Of Active Methylene Compounds, Liang-Hua Jie, Hai-Chao Xu

Journal of Electrochemistry

The development of novel strategies to access cyclopropanes has become increasingly important due to the vital role of these three-membered ring structures in synthetic intermediates, natural products, and pharmaceuticals. Herein, we present an electrocatalytic method for the synthesis of cyclopropanes through intermolecular dehydrogenative annulation of active methylene compounds and arylalkenes. This electrochemical process requires no chemical oxidants, allowing for a speedy access to various functionalized cyclopropanes from inexpensive and readily available materials.

Gate-Controlled Supercurrent Effect In Dry-Etched Dayem Bridges Of Non-Centrosymmetric Niobium Rhenium, Jennifer Koch, Carla Cirillo, Sebastiano Battisti, Leon Ruf, Zahra Makhdoumi Kakhaki, Alessandro Paghi, Armen Gulian, Serafim Teknowijoyo, Giorgio De Simoni, Francesco Giazotto, Carmine Attanasio, Elke Scheer, Angelo Di Bernardo

Mathematics, Physics, and Computer Science Faculty Articles and Research

The application of a gate voltage to control the superconducting current flowing through a nanoscale superconducting constriction, named as gate-controlled supercurrent (GCS), has raised great interest for fundamental and technological reasons. To gain a deeper understanding of this effect and develop superconducting technologies based on it, the material and physical parameters crucial for the GCS effect must be identified. Top-down fabrication protocols should also be optimized to increase device scalability, although studies suggest that top-down fabricated devices are more resilient to show a GCS. Here, we investigate gated superconducting nanobridges made with a top-down fabrication process from thin films of …

Injectable And Rapidly Expandable Thrombin-Decorated Cryogels Achieve Rapid Hemostasis And High Survival Rates In A Swine Model Of Lethal Junctional Hemorrhage, Syed Muntazir Andrabi, S.M. Shatil Shahriar, Al-Murtadha Al-Gahmi, Benjamin L. Wilczewski, Mark A. Carlson, Jingwei Xie

Department of Mechanical and Materials Engineering: Faculty Publications

Effective therapies are urgently needed to stabilize patients with marginally compressible junctional hemorrhage long enough to get them to the hospital alive. Herein, we report injectable and rapidly expandable cryogels consisting of polyacrylamide and thrombin (AT cryogels) created by cryo-polymerization for the efficient management of lethal junctional hemorrhage in swine. The produced cryogels have small pore sizes and highly interconnected porous architecture with robust mechanical strength. The cryogels exhibit rapid shape memory properties and prove to be resilient against fatigue. These cryogels also show high water/blood absorption capacity, fast blood clotting effect, and enhanced adhesion of red blood cells and …

Development Of Novel Analytical Methods For The Investigation Of Mammalian Tissues And Cells, Grace A. Binder

USF Tampa Graduate Theses and Dissertations

This dissertation endeavors to advance the frontiers of analytical chemistry by addressing critical challenges across three distinct chapters. In the first chapter, the focus is on the evaluation of digestion methods for the analysis of trace metals in mammalian tissues and the Standard Reference Material NIST 1577c. The primary goal is to optimize methodologies, laying the groundwork for reliable trace metal analysis and furthering our understanding of their roles in biological systems.

Transitioning into the realm of immunomodulation, the second chapter elucidates immune response, disease and treatment through the optimization and discovery of STING modulators, utilizing the luciferase assay for …

Recent Advances In Solar Photo(Electro)Catalytic Nitrogen Fixation, Jun-Bo Ma, Sheng Lin, Zhiqun Lin, Lan Sun, Chang-Jian Lin

Journal of Electrochemistry

Ammonia (NH₃) is an essential chemical in modern society. It is currently produced in industry by the Haber-Bosch process using H₂ and N₂ as reactants in the presence of iron-based catalysts at high-temperature (400–600 ^oC) and extremely highpressure (20–40 MPa) conditions. However, its efficiency is limited to 10% to 15%. At the same time, a large amount of energy is consumed, and CO₂ emission is inevitably. The development of a sustainable, clean, and environmentally friendly energy system represents a key strategy to address energy crisis and environmental pollution, ultimately aiming to achieve carbon neutrality. …

Electrospun Nanofiber Technology Based Energy Storage And Biosensor Devices For Wearable Electronics, Bianca Seufert

USF Tampa Graduate Theses and Dissertations

As progress in the field of nanotechnology continues to evolve, it is becoming more and more prevalent to apply this small but powerful technology to portable wearable electronics. The unique scale of such a technology lends its expertise to the investigation of enzymes for biometric related diagnostics or in the development of light weight flexible energy storage devices. Furthermore, as the need for highly precise and durable wearable electronics grows, the next generation of electronics must keep pace with this development in terms of shape, flexibility, functionality, and performance.

The presented research reviews the current state of art of nanofiber …

The Determination Of Pzc And Differential Capacitance Curve Of Platinum-Alkaline Polymer Electrolyte Interfaces, Chen-Xi Liu, Ze-Ping Zou, Mei-Xue Hu, Yu Ding, Yu Gu, Shuai Liu, Wen-Jing Nan, Yi-Chang Ma, Zhao-Bin Chen, Dong-Ping Zhan, Qiu-Gen Zhang, Lin Zhuang, Jia-Wei Yan, Bing-Wei Mao

Journal of Electrochemistry

Alkaline polymer electrolyte (APE) is the core component of modern alkaline hydrogen and oxygen fuel cells, and its single ion conductor nature makes the "electrode/APE" interfaces different from the conventional "electrode/solution" interfaces in terms of ion distribution, electrical double layer structure and polarization behavior. Due to the complexity of the APE and the associated solid-solid interfaces, fundamental investigations are challenging and deeper understanding of the structures and properties of such interfaces is in the infant stage. In this work, we aim to investigate the double layer structure from the aspects of differential capacitance curve and potential of zero charge (PZC) …

Micropatterning And Functionalization Of Single Layer Graphene: Tuning Its Electron Transport Properties, Miao-Miao Cui, Lian-Huan Han, Lan-Ping Zeng, Jia-Yao Guo, Wei-Ying Song, Chuan Liu, Yuan-Fei Wu, Shi-Yi Luo, Yun-Hua Liu, Dong-Ping Zhan

Journal of Electrochemistry

As a promising 2D material, graphene exhibits excellent physical properties including single-atom-scale thickness and remarkably high charge carrier mobility. However, its semi-metallic nature with a zero bandgap poses challenges for its application in high-performance field-effect transistors (FETs). In order to overcome these limitations, various approaches have been explored to modulate graphene's bandgap, including nanoscale confinement, external field induction, doping, and chemical micropatterning. Nevertheless, the stability and controllability still need to be improved. In this study, we propose a feasible method that combines electrochemical bromination and photolithography to precisely tune the electron transport properties of single layer graphene (SLG). Through this …

Oral Administration Of Ph-Responsive Polymeric Nanoparticles Based On Zein And Their Therapeutic Potential On Cancer., Bruno Alejandro Valades-Aguilar, José Raúl Rangel-López, Jennifer Citlally Leos-Rivera, Moisés Armides Franco-Molina, María Cristina Rodríguez-Padilla, Diana Ginette Zárate-Triviño

Research Symposium

Background: Zein is a water-insoluble protein extracted from the endosperm of corn seeds, this polymer is an attractive matrix to encapsulate hydrophilic compounds because of its high proportion of hydrophobic amino acids, making it a potential smart delivery material for several treatments in the biopharmaceutical industry. nanoparticles have been used as drug delivery systems for the improvement of oral bioavailability; however, the strategies of nanoparticle obtention need the addition of stabilizers. in this study, a modified method to obtain zein nanoparticles was developed.

Methods: Zein nanoparticles (ZNps) were made by a thermal treatment and precipitated into ovalbumin at a ratio …

La1-Xsrxcoo3 Perovskite Nanomaterial: Synthesis, Characterization, And Its Biomedical Application, Adhira Tippur, Anyet Shohag, Luke Franco, Ahmed Touhami, Swati Mohan, Mohammed Uddin

Research Symposium

Early cancer detection is paramount for effective treatment and potential cures. This research explores the application of perovskite materials, specifically Sr2+-doped Lanthanum Cobaltite (La1-xSrxCoO3) nanomaterials, in cancer detection, with a focus on rats as an experimental model. The ferroelectric nature of these materials, synthesized through a combination of sol-gel and molten-salt processes, was examined at varying Sr2+ doping levels (1-20 wt%). Rigorous characterization, employing X-ray diffraction and scanning electron microscopy, confirmed the uniform morphology of nano cubes, laying the foundation for subsequent investigations. The magnetic properties of the perovskite nanoparticles were probed, suggesting their potential as a diagnostic tool for …

Comparative Assessment Of Gold Nanoparticle-Antibody Conjugates With Two Differently Shaped Particles For Multimodal Colorimetric Lateral Flow Assay, Vinayak Sharma, Bilal Javed, Furong Tian

Articles

Novel detection strategies that exploit the unique properties of gold nanoparticles (AuNPs) hold great potential for the advancement of point-of-care (POC) diagnostics, such as lateral flow and dipstick immunoassay [1–3]. Owing to its biocompatibility and convenient surface modifications, gold nanoparticles with enhanced sensitivity reduce the sample-to-answer times to less than 5 min (Figure 1). Methods like covalent conjugation and electrostatic adsorption are explored for antibody immobilization to develop a gold nanoparticle-based biosensor for fast and sensitive localized surface plasmon resonance (LSPR) for both basic research and clinical diagnostics. The mounting of antibodies on the gold nanoparticle surface requires selective binding …

Study On R&D Strategies In Nanoscale Science And Technology Of Powerhouses And Insights, Wenyue Bian, Xingjie Liang, Chunlei Ge, Zhongyang Hui, Xiaoqi Jia, Si Liu, Jing Ye, Xiaoyi Chen, Wenjun Wang, Huajun Ju

Bulletin of Chinese Academy of Sciences (Chinese Version)

Nanoscale science and technology (nano S&T) are at the frontier of global strategic high-tech competition. After examining nearly 160 strategy and planning documents released by scientific and technological powerhouses from 2000 to 2023, the study finds ten common approaches adopted by the powerhouses to advance nano S&T as follows. (1) Recognizing nano S&T as a key area for the economy and global competition. (2) Establishing cross-department organizations to meet the cross-disciplinary nature of nano S&T. (3) Developing strategic plans to guide the development of nano S&T and implementing major programs with significant investment. (4) Establishing multidisciplinary nano S&T research centers …

6d Single-Fluorogen Orientation-Localization Microscopy For Elucidating The Architecture Of Beta-Sheet Assemblies And Biomolecular Condensates, Tingting Wu, Weiyan Zhou, Jai S. Rudra, Rohit V. Pappu, Matthew D. Lew

Electrical & Systems Engineering Publications and Presentations

We develop six-dimensional single-molecule orientation-localization microscopy (SMOLM) to measure the 3D positions and 3D orientations simultaneously of single fluorophores. We show how careful optimization of phase and polarization modulation components can encode phase, polarization, and angular spectrum information from each fluorescence photon into a microscope’s dipole-spread function. We used the transient binding and blinking of Nile red (NR) to characterize the helical structure of fibrils formed by designed amphipathic peptides, KFE8^L and KFE8^D, and the pathological amyloid-beta peptide Aβ42. We also deployed merocyanine 540 to uncover the interfacial architectures of biomolecular condensates.

New Models For Estimating Minimum Miscibility Pressure Of Pure And Impure Carbon Dioxide Using Artificial Intelligence Techniques, Attia Attia, Ahmed Ashraf Soliman Eng., John Shahat Eng., Sayed Gomaa Prof., Fares Ashraf El Salamony Prof.

Petroleum Engineering and Gas

CO2 miscible flooding stands out as one of the most-commonly employed and promising processes in enhanced oil recovery. The key factor for ensuring success in designing and executing CO2 injection projects lies in the precise determination of the Minimum Miscibility Pressure (MMP). Despite significant research endeavors in measuring and predicting the MMP through the use of empirical, analytical, numerical, and experimental approaches, the need for a comprehensive, accurate, efficient, and easy-to-use model remains. In response to this gap, our study developed various predictive models with 205 datasets, including well-established ones such as Artificial Neural Network (ANN), Random Forest (RF), and …

Blow-Spun Hybrid Pcl-Peo/Hnts Scaffolds With Enhanced Biological And Mechanical Properties, Meichen Liu

Doctoral Dissertations

With the development of technology and engineering, nanotechnology has been a multidisciplinary scientific field applied in nearly all science areas, including medicine, genetics, food industry, robotics. In this respect, nanomedicine has gained increasing attention and been a useful, effective therapy for cancer diagnosis, gene transfer, and drug delivery. To design an ideal nano drug delivery system with controlled drug releasing and improved encapsulated drug’s pharmacokinetic and pharmacodynamic profiles, hydrogels and polymer composites have witnessed increased research interest during the last decades. Recently, numerous polymers have been studied to fabricate the ideal wound dressing with biocompatibility, biodegradability, porous structural, and suitable …

Selective Targeting Of Microglia By Quantum Dots And Green Synthesis Of Metal Organic Biohybrids; Applications In Dynamic Cell And Assay Systems, Navya Uppu

Doctoral Dissertations

Neurological disorders are the leading cause of physical and cognitive disability across the globe, currently affecting approximately 15% of the worldwide population. Part of the glioma microenvironment are microglia, resident immune cells of the CNS that were thought to be involved in the pathogenesis of diverse neurodegenerative diseases. Though it remains uncertain what triggers microglial activation in these disorders, targeting and tracking microglial functions using nanotools like Quantum Dots (QDs) could help us elucidate them in such neurological diseases. This research focuses on the comparative study of different QDs formulations and their selective uptake by brain microglia in primary cultures …