Nanoscience and Nanotechnology Commons^™

Joint Time-Frequency Analysis: Taking Charge Penetration Depth And Current Spatial Distribution In The Single Pore As An Example, Nan Wang, Qiu-An Huang, Wei-Heng Li, Yu-Xuan Bai, Jiu-Jun Zhang

Journal of Electrochemistry

In recent years, joint time-frequency analysis has once again become a research hotspot. Supercapacitors have high power density and long service life, however, in order to balance between power density and energy density, two key factors need to be considered: (i) the specific surface area of the porous matrix; (ii) the electrolyte accessibility to the intra-pore space of porous carbon matrix. Electrochemical impedance spectra are extensively used to investigate charge penetration ratio and charge storage mechanism in the porous electrode for capacitance energy storage. Furthermore, similar results could be obtained by different methods such as stable-state analysis in the frequency …

Automated Workflow For Redox Potentials And Acidity Constants Calculations From Machine Learning Molecular Dynamics, Feng Wang, Jun Cheng

Journal of Electrochemistry

Redox potentials and acidity constants are key properties for evaluating the performance of energy materials. To achieve computational design of new generation of energy materials with higher performances, computing redox potentials and acidity constants with computational chemistry have attracted lots of attention. However, many works are done by using implicit solvation models, which is difficult to be applied to complex solvation environments due to hard parameterization. Recently, ab initio molecular dynamics (AIMD) has been applied to investigate real electrolytes with complex solvation. Furthermore, AIMD based free energy calculation methods have been established to calculate these physical chemical properties accurately. However, …

Copper−Cystine Biohybrid-Embedded Nanofiber Aerogels Show Antibacterial And Angiogenic Properties, Anik Karan, Navatha S. Polavaram, Margarita Darder, Yajuan Su, Syed Muntazir Andrabi, S M Shatil Shahriar, Johnson V. John, Zeyu Luo, Mark A. Decoster, Yu Shrike Zhang, Jingwei Xie

Department of Mechanical and Materials Engineering: Faculty Publications

Copper−cystine-based high aspect ratio structures (CuHARS) possess exceptional physical and chemical properties and exhibit remarkable biodegradability in human physiological conditions. Extensive testing has confirmed the biocompatibility and biodegradability of CuHARS under diverse biological conditions, making them a viable source of essential Cu²⁺. These ions are vital for catalyzing the production of nitric oxide (NO) from the decomposition of Snitrosothiols (RSNOs) found in human blood. The ability of CuHARS to act as a Cu²⁺ donor under specific concentrations has been demonstrated in this study, resulting in the generation of elevated levels of NO. Consequently, this dual function makes …

Nanoparticles For Applications In Specific Diagnostics And Precision Medicine, Naxhije Berisha

Dissertations, Theses, and Capstone Projects

Heterogeneity is common in the expression of cancer and treatment response. Precision medicine enables healthcare providers to tailor medical care to an individual's distinct genetic and environmental makeup. This customization has the potential to result in more efficient treatments while minimizing side effects. We believe that by studying the interface of nanotechnology and cancer medicine we can elucidate innovative solutions that address the challenges of disease heterogeneity. This includes advancements in drug delivery, formulations development, and diagnostic sensing. We highlight three studies that use nanotechnology for applications in precision medicine. In Chapter 2, we highlight design optimization of drug formulations …

The Effect Of Mechanical Strain On The Electronic Conductivity Of Α- Fe2o3: A Density Functional Theory Study, Sheriff Naziru Abdulmutalib

Theses and Dissertations

Hydrogen has emerged as a promising future energy carrier due to its ability to produce zero carbon dioxide (CO2) emissions when burned. However, the limited natural abundance of hydrogen necessitates the development of cost-effective and environmentally friendly methods for large-scale hydrogen production. Among the different hydrogen production approaches, photoelectrochemical water splitting, which employs a photoanode material in a cell using solar energy to split water into hydrogen and oxygen, is the focus of this work. α-Fe2O3 (hematite) is a photoanode material that shows a promising future for hydrogen generation in a photoelectrochemical cells due to its cheapness, availability, and its …

Mechanical And Electromagnetic Properties Of Incorporating Graphene Oxide In Cementitious Mixtures, Cherif Khalil

Theses and Dissertations

This multidisciplinary study aimed at investigating the impact of incorporating graphene oxide (GO) on the mechanical properties and electromagnetic (EM) shielding effectiveness of cementitious mixtures, as well as critically examining the mechanism with which GO affects their microstructure properties. Analysis of the literature review showed that there are discrepancies in reporting the impact of GO on the mortar mix. Consequently, this study focuses on exploring the cause for such discrepancies and identifies three main factors which are thoroughly investigated. The factors were the different sonication energies applied to the GO (Shear Mixing, 1.5 kJ/ml, 3 kJ/ml and 6 kJ/ml), the …

Smartphone Color Error Analysis, Mackenna Hawes

The Journal of Purdue Undergraduate Research

No abstract provided.

Rational Design Of Heterostructured Nanomaterials For Accelerating Electrocatalytic Hydrogen Evolution Reaction Kinetics In Alkaline Media, Hai-Bin Ma, Xiao-Yan Zhou, Jia-Yi Li, Hong-Fei Cheng, Ji-Wei Ma

Journal of Electrochemistry

Owing to the merits of high energy density, as well as clean and sustainable properties, hydrogen has been deemed to be a prominent alternative energy to traditional fossil fuels. Electrocatalytic hydrogen evolution reaction (HER) has been considered to be mostly promising for achieving green hydrogen production, and has been widely studied in acidic and alkaline solutions. In particular, HER in alkaline media has high potential to achieve large-scale hydrogen production because of the increased durability of electrode materials. However, for the currently most prominent catalyst Pt, its HER kinetics in an alkaline solution is generally 2–3 orders lower than that …

Monodispersed Cu-Tcpp/Cu2O Hybrid Microspheres: A Superior Cascade Electrocatalyst Toward Co2 Reduction To C2 Products, Zi-Xuan Wan, Aidar Kuchkaev, Dmitry Yakhvarov, Xiong-Wu Kang

Journal of Electrochemistry

The electrochemical conversion of carbon dioxide (CO₂) into valuable chemicals is a feasible way to mitigate the negative impacts of overmuch CO₂ emissions. Porphyrin-based metal organic frameworks (MOFs) are expected to be used for selective and efficient electrochemical CO₂ reduction (ECR) with porous structure and ordered active sites. Herein, we report the synthesis of a monodispersed and spherical organic/inorganic hybrid Cu-TCPP@Cu₂O electrocatalyst composed of Cu-TCPP (TCPP=tetrakis (4-carboxyphenyl) porphyrin) and Cu₂O, where TCPP plays significant roles in regulating the morphology. In-situ formed Cu during ECR process in combination with Cu-TCPP (Cu-TCPP@Cu) can suppress …

Implantation Of A Capsular Tension Ring During Cataract Surgery Attenuates Predicted Remodeling Of The Post-Surgical Lens Capsule Along The Visual Axis, Kurt A. Ameku, Caleb C. Berggren, Ryan M. Pedrigi

Department of Mechanical and Materials Engineering: Faculty Publications

Introduction: Cataract surgery permanently alters the mechanical environment of the lens capsule by placing a hole in the anterior portion and implanting an intraocular lens (IOL) that has a very different geometry from the native lens. We hypothesized that implant configuration and mechanical interactions with the post-surgical lens capsule play a key role in determining long-term fibrotic remodeling.

Methods: We developed the first finite element-growth and remodeling (FE-G&R) model of the post-surgical lens capsule to evaluate how implantation of an IOL with and without a capsular tension ring (CTR) impacted evolving lens capsule mechanics and associated fibrosis over …

Engineering Neurotoxin-Functionalized Exosomes For Targeted Delivery To The Peripheral Nervous System, Mena Asha Krishnan, Olawale A. Alimi, Tianshu Pan, Mitchell Kuss, Zeljka Korade, Guoku Hu, Bo Liu, Bin Duan

Department of Mechanical and Materials Engineering: Faculty Publications

The administration of therapeutics to peripheral nerve tissue is challenging due to the complexities of peripheral neuroanatomy and the limitations imposed by the blood–nerve barrier (BNB). Therefore, there is a pressing need to enhance delivery effectiveness and implement targeted delivery methods. Recently, erythrocyte-derived exosomes (Exos) have gained widespread attention as biocompatible vehicles for therapeutics in clinical applications. However, engineering targeted Exos for the peripheral nervous system (PNS) is still challenging. This study aims to develop a targeted Exo delivery system specifically designed for presynaptic terminals of peripheral nerve tissue. The clostridium neurotoxin, tetanus toxin-C fragment (TTC), was tethered to the …

Yap Mechanotransduction Under Cyclic Mechanical Stretch Loading For Mesenchymal Stem Cell Osteogenesis Is Regulated By Rock, Eunju Kim, Brandon D. Riehl, Tasneem Bouzid, Ruiguo Yang, Bin Duan, Henry J. Donahue, Jung Yul Lim

Department of Mechanical and Materials Engineering: Faculty Publications

While yes-associated protein (YAP) is now recognized as a potent mechanosensitive transcriptional regulator to affect cell growth and differentiation including the osteogenic transcription of mesenchymal stem cells (MSCs), most studies have reported the YAP mechanosensing of static mechanophysical cues such as substrate stiffness. We tested MSC response to dynamic loading, i.e., cyclic mechanical stretching, and assessed YAP mechanosensing and resultant MSC osteogenesis. We showed that cyclic stretching at 10% strain and 1 Hz frequency triggered YAP nuclear import in MSCs. YAP phosphorylation at S127 and S397, which is required for YAP cytoplasmic retention, was suppressed by cyclic stretch. We also …

A Smart Energy-Efficient Hybrid Gait Monitoring System, Elsa Joy Harris

CGU Theses & Dissertations

Triboelectric nanogenerators are devices that harvest mechanical energy from the environment and turn it into electricity. By coupling the effect of contact electrification and electrostatic induction between two materials that come into contact and then separate they can convert the irregular, low frequency, waste biomechanical energy of human motion into useful electrical energy to run small body-worn electronics. This has shown promising results in multiple applications such as self-powered motion and haptic sensing, self-charging micro-storage devices, neuromorphic computing, and designing batteryless circuits to power small wearables. This work will investigate a smart energy-efficient hybrid gait monitoring system that is powered …

Long-Term Simulation Of Stem Cell Mechanobiology, Manoochehr Rabiei

Mechanical and Aerospace Engineering Dissertations - Archive

An accurate representation of cellular mechanobiology necessitates the inclusion of subcellular elements characterized by minute masses and dimensions. These minute objects yield multiscale dynamic models with disproportionate terms, which require inordinate amounts of computational time to simulate. The computational requirements limit the time span of the simulation to time histories shorter than one second, even when employing supercomputers. This work presents a high-speed approach to simulating the mechanobiology of stem cells. The proposed approach separates the computational time from the size, and distribution, of masses of the subcellular elements, enabling the simulation of weeks-long cellular processes within hours on a …

Applications Of Plasmonic Biosensors In Chiral And Achiral Sensing, Aritra Biswas

Graduate Thesis and Dissertation 2023-2024

Monitoring biological systems is crucial in healthcare, driving the need for reliable and noninvasive solutions. The proliferation of unverified drugs in the market necessitates reliable methods for their detection and identification, especially amidst advancements in pharmaceuticals. Plasmonic biosensors emerge as a great platform for ultra-sensitive detection, identification, and manipulation of biomolecular systems. This dissertation report addresses the critical need for precise detection and monitoring of biomolecules and drugs, presenting innovative solutions through the design of a plasmonic biosensor to tackle challenges in sensitivity, selectivity, and label-free detection and identification. We introduce a robust and tunable, cavity-integrated plasmonic nanopatterned sensor that …

Materials Development Towards Enhanced Performance And Stability Of Zinc-Iron Flow Batteries., Parimol Tippayamalee

Chulalongkorn University Theses and Dissertations (Chula ETD)

To reduce CO2 production from fossil fuel consumption, which is the main cause of global boiling, renewable energy is necessary to help achieve zero CO2 emissions. However, large-scale renewable energy systems need huge stationary energy storage with high performance, long lifetime, and reasonable prices to serve energy stock during downtime. Redox flow batteries (RFBs) are one of the promising technologies for stationary energy storage applications. Yet, the current vanadium-based RFBs are plagued by high costs, material toxicity, and environmental concerns. Therefore, there is a need to develop lower-cost, safe, and environmentally friendly RFBs for long storage. For this reason, zinc-based …

Study Of Nanoparticle Dispersed Phase Change Materials And The Impact Of Temperature Gradient On The Potential For Particle Migration, Udit Sharma

Dissertations, Master's Theses and Master's Reports

Supercooling in phase change materials (PCMs) and the associated challenges in enhancing thermal conductivity through nanoparticle dispersion prompted this investigation. Existing literature exhibits inconsistencies in thermal conductivity improvements, suggesting a potential correlation with nanoparticle migration induced by thermophoresis. To address this, a novel temperature-dependent scaling parameter, \(\xi\), was introduced to predict particle migration propensity. A strong association was observed between higher \(\xi\) values and diminished thermal conductivity enhancements, indicating a significant influence of nanoparticle movement on heat transfer.

To further elucidate this relationship, a Nanoparticle Interaction Parameter \(N_\text{{pl}}\) was developed, incorporating critical fluid properties and interfacial effects. The derived critical …

Type-B Energetic Processes: Introduction And Invitation To Special Issue Of Energies, James Weifu Lee, Daniel P. Sheehan

Chemistry & Biochemistry Faculty Publications

[First paragraph] Currently, there is substantial scientific evidence for the existence of Type-B energetic processes on Earth, such as the naturally occurring transmembrane-electrostatically localized protons (TELP) thermotrophic properties in life [1]. A number of groundbreaking human-made Type-B energetic processes, including (but not limited to) “asymmetric function-gated isothermal electricity production” [2], “epicatalysis generating a temperature difference between catalysis-asymmetric filaments” [3], “artificially made asymmetric membrane concentration cell” [4,5], “Fu’s experiment on heat–electric conversion using surface electron emission under a static magnetic field” [6], and the “dynamic processes in superconductors indicating Type-B energetic process” [7,8,9] have been invented and/or experimentally demonstrated. The innovative …

Photoluminescence Switching In Quantum Dots Connected With Carboxylic Acid And Thiocarboxylic Acid End-Group Diarylethene Molecules, Ephraiem S. Sarabamoun, Pramod Aryal, Jonathan M. Bietsch, Maurice Curran, Sugandha Verma, Grayson Johnson, Lucy U. Yoon, Amelia G. Reid, Esther H. R. Tsai, Charles W. Machan, Christopher Paolucci, Guijun Wang, Joshua J. Choi

Chemistry & Biochemistry Faculty Publications

We contrast the switching of photoluminescence (PL) of PbS quantum dots (QDs) cross-linked with photochromic diarylethene molecules with different end groups, 4,4′-(1-cyclopentene-1,2-diyl)bis[5-methyl-2-thiophenecarboxylic acid] (1C) and 4,4′-(1-cyclopentene-1,2-diyl)bis[5-methyl-2-thiophenethiocarboxylic acid] (2T). Our results show that the QDs cross-linked with the carboxylic acid end group molecules (1C) exhibit a greater amount of switching in photoluminescence intensity compared to QDs cross-linked with the thiocarboxylic acid end group (2T). We also demonstrate that regardless of the molecule used, greater switching amounts are observed for smaller quantum dots. Varying these parameters allows for the fabrication of photoswitches with tunable PL change. We relate these observations to the …

Advanced Nested Coaxial Thin-Film Zno Nanostructures Synthesized By Atomic Layer Deposition For Improved Sensing Performance, Pengtao Lin, Lari S. Zhang, Kai Zhang, Helmut Baumgart

Electrical & Computer Engineering Faculty Publications

We report a new synthesis method for multiple-walled nested thin-film nanostructures by combining hydrothermal growth methods with atomic layer deposition (ALD) thin-film technology and sacrificial films, thereby increasing the surface-to-volume ratio to improve the sensing performance of novel ZnO gas sensors. Single-crystal ZnO nanorods serve as the core of the nanostructure assembly and were synthesized hydrothermally on fine-grained ALD ZnO seed films. Subsequently, the ZnO core nanotubes were coated with alternating sacrificial coaxial 3D wrap-around ALD Al2O3 films and ALD ZnO films. Basically, the center nanorod was coated with an ALD 3D wrap-around Al₂O₃ sacrificial layer to realize a nested …

Design And Performance Of Superconducting Switches For Nanowire Detectors In Magnetic Fields, Timothy James Draher

Graduate Research Theses & Dissertations

Superconducting nanowire devices fit a broad spectrum of applications, including particle detection and quantum computing, and their expanding use across various fields highlights their role in the hybridization of superconducting and conventional semiconductor electronics. Despite their potential, the low signal output of these devices raises challenges in scalability and integration, particularly in applications for nuclear and high-energy physics, where resilience in magnetic fields is becoming a critical optimization factor. The superconducting nanowire cryotron (nTron) addresses these issues by providing operational gain and logic switching in superconducting nanowire circuits, demonstrating adaptability to multiple materials. This dissertation focuses on modifying the conventional …

Nanoparticle Stabilized Interfaces And Their Effect On Foam Stability, Nicole T. Donovan

Dissertations and Theses

No abstract provided.

An Overview Of The Relationships Between The Food Industry And Nanotechnology, Mehdi Koushki, Nasrin Amiri-Dashatan, Hossein Pourghadamyari, Hadi Khodabandehloo, Fatemeh Bagheri, Masoumeh Farahani, Lobat Tayebi

Electrical & Computer Engineering Faculty Publications

Background and Objective: Due to the growth of the global population, food demands are increasing. Hence, the need to develop more efficient methods for producing better quality, safer, and more sustainable food seems essential. In the past decades, the use of nanoscale materials has increased greatly due to the unique chemical, physical, and biological characteristics of nanomaterials compared to bulk materials. This research presents nanotechnology role in improving sensorial properties (taste, appearance, and texture) and safety aspects as well as processing and packaging of foods. The use of nano-omics-based technologies and artificial intelligence-nanotechnology-based technologies in the food industry is also …

Bridging The Gap In Epsilon-Near-Zero Nonlinear Materials, Adam R. Ball

Theses and Dissertations

Studying how light and matter interact has been of interest to humans for thousands of years. From the invention of the first mirror, burning ants with a magnifying glass, to optical fiber communication, light has been central to mankind. Researchers have sought to take this to the extreme with nonlinear optics where intense laser light interacts with materials. The study of this thesis is to understand a new generation of materials that has come to light. Epsilon-near-zero (ENZ) materials have shown promise for ultrafast light manipulation in tandem with modern day CMOS compatible electronics. Here, I seek to bridge the …

Single-Atom Catalysts For Electrochemical Energy Conversion: Copper Single-Atom Catalyst For Oxygen Reduction Reaction And Quantification Of Site Density By Co Stripping Voltammetry, Dawatage Perera

Theses and Dissertations--Chemistry

Fuel cells are considered a promising technology for achieving cleaner and more sustainable energy production and utilization. However, one of the current major challenges is the economic viability associated with the extensive use of Pt group metal (PGM) catalysts, particularly on the cathode side. Therefore, non-PGM single-atom catalysts (SACs) have received considerable attention as alternatives for PGM catalysts in the oxygen reduction reaction (ORR), which occurs at the cathode of the fuel cell. Among various SAC structures, the non-PGM/nitrogen-doped carbon-based structure (M-N-C) stands out for its excellent ORR performance.

Chapter 2 illustrates the use of copper metal in place of …

Photoexcited Charge Carrier Dynamics And Electronic Properties Of Two-Dimensional Mxene, Nb2ctx, Andrew M. Fitzgerald, Emily Sutherland, Tarek A. Elmelegy, Mary Qin Hassig, Julia Martin, Erika Colin-Ulloa, Ken Ngo, Ronald L. Grimm, Joshua R. Uzarski, Michel W. Barsoum, N. Aaron Deskins, Lyubov V. Titova, Kateryna Kushnir Friedman

Mechanical Engineering

Two-dimensional, 2D, niobium carbide MXene, Nb2CTx, has attracted attention due to its extraordinarily high photothermal conversion efficiency that has applications ranging from medicine, for tumor ablation, to solar energy conversion. Here, we characterize its electronic properties and investigate the ultrafast dynamics of its photoexcitations with a goal of shedding light onto the origins of its unique properties. Through density functional theory, DFT, calculations, we find that Nb2CTx is metallic, with a small but finite density of states at the Fermi level for all experimentally relevant terminations of Nb2CTx that can be achieved using HF or molten salt etching of the …

Electrolyte/Electrode Interfacial Electrochemical Optimization Strategies For Durable Aqueous Zinc-Ion Batteries, Jingjing Niu

Chulalongkorn University Theses and Dissertations (Chula ETD)

Aqueous zinc ion batteries, as a type of secondary battery using inorganic aqueous solution as the electrolyte, are considered to be a strong contender in the field of future energy storage technologies due to their high theoretical electric capacity, high safety, low cost and environmental friendliness. However, aqueous zinc ion batteries also face some challenges. The first is the relatively low energy density, which requires further optimisation of electrode materials and battery structure. Secondly, the creation of zinc dendrites can reduce the cycling stability and safety of the battery. In addition, prolonging the cycle life is also a pressing issue. …

Development Of Janus Membrane From Electrospun Nanofiber For Membrane Distillation Processes, Michaela Olisha Lobregas

Chulalongkorn University Theses and Dissertations (Chula ETD)

The Janus membrane, characterized by surfaces with opposite wettability, represents an innovative design for membrane distillation (MD). This study introduces new methods for fabricating MD membranes with tailored surfaces to address fouling and wetting challenges in saline systems. A nanofibrous Janus membrane was developed, featuring an omniphobic substrate as the non-wetting layer and a hydrophilic top coating as the wetting layer. Using the dual-spinneret system for simultaneous electrospinning and electrospraying, a composite substrate membrane, comprising a loose network of PVDF nanofibers and PVDF-fluorinated TiO2 microclusters, was produced. This membrane exhibited high resistance to liquids, including water, glycerol, diiodomethane, and saline. …

Air Flow Behavior Assessment In Particulate Filtration Efficiency (Pfe) Tester Via Computational Fluid Dynamics (Cfd), Muhammad Amer

Chulalongkorn University Theses and Dissertations (Chula ETD)

Particulate Filtration Efficiency (PFE) assessment is critical for evaluating filter media. There are several PFE testing protocol depending on products and issuing countries, for example ASTM-F2299 standard for disposable medical masks, NIOSH-TEB-APR-STP-0059 for N and R series respirators, and ISO-29463 for HEPA filters. While the PFE testing principles of all standard are the same, their requirement, testing protocol and minute details are different. Air flow characteristic before and after filter media in testing chamber is very important to accuracy of PFE measurement, especially for ASTM F2299 standard. We have developed a custom PFE tester per ASTM F2299 using a simple …

Accelerating The Exploration Of High-Entropy Alloys: Synergistic Effects Of Integrating Computational Simulation And Experiments, Deyu Jiang, Yuhua Li, Liqiang Wang, Lai Chang Zhang

Research outputs 2022 to 2026

High-entropy alloys (HEAs) are novel materials composed of multiple elements with nearly equal concentrations and they exhibit exceptional properties such as high strength, ductility, thermal stability, and corrosion resistance. However, the intricate and diverse structures of HEAs pose significant challenges to understanding and predicting their behavior at different length scales. This review summarizes recent advances in computational simulations and experiments of structure-property relationships in HEAs at the nano/micro scales. Various methods such as first-principles calculations, molecular dynamics simulations, phase diagram calculations, and finite element simulations are discussed for revealing atomic/chemical and crystal structures, defect formation and migration, diffusion and phase …