Mining Engineering Commons^™

Material Properties Affecting The Penetration Of Metal Targets By Copper Linear Shaped Charges, Kevin Lee Phelps

Masters Theses

"A linear shaped charge (LSC) is an explosive device used in demolition, aerospace, and in other applications that require the cutting of metal. Users of LSC's typically know the size of shaped charge needed to cut their target but commonly encounter previously untested materials. The motivation for this thesis is to provide an understanding as to what target material properties are good indicators of cutting performance so the selection of LSC can be more efficient. The author found that penetration theories for other types shaped charges were insufficient for the LSC, possibly because of the relatively slow projectile created by …

Artificial Neural Network Approach To Predict Blast-Induced Ground Vibration, Airblast And Rock Fragmentation, Raymond Ninnang Tiile

Masters Theses

"Blasting has been widely used as an economical and cheap way of rock breakage in mining and civil engineering applications. An optimal blast yields the best fragmentation in a safe, economic and environmentally friendly manner. The degree of fragmentation is vital as it determines to a large extent the utilization of equipment, productivity and mill throughput. Explosive energy, besides rock fragmentation, creates health and safety issues such as ground vibration, air blast, fly rock, and back breaks among others. As a result, the explosive energy impacts structures and buildings located in the vicinity of the blasting operation, and causes human …

Quantification Of Radicals Generated In A Sonicator, K. O. Badmus, J. O. Tijani, C. P. Eze, O. O. Fatoba, L. F. Petrik

Mining Engineering Faculty Research & Creative Works

The hydroxyl radical (OH•) is a powerful oxidant produced as a consequence of cavitation in water. It can react nonspecifically in breaking down persistent organic pollutants in water into their mineral form. It can also recombine to form hydrogen peroxide which is very useful in water treatment. In this study, terephthalic acid (TA) and potassium iodide dosimetry were used to quantify and investigate the behavior of the generated OH radical in a laboratory scale sonicator. The 2-hydroxyl terephthalic acid (HTA) formed during terephthalic acid dosimetry was determined by optical fiber spectrometer. The production rate of HTA served as a means …

Applications Of Simulation And Optimization Techniques In Optimizing Room And Pillar Mining Systems, Angelina Konadu Anani

Doctoral Dissertations

"The goal of this research was to apply simulation and optimization techniques in solving mine design and production sequencing problems in room and pillar mines (R&P). The specific objectives were to: (1) apply Discrete Event Simulation (DES) to determine the optimal width of coal R&P panels under specific mining conditions; (2) investigate if the shuttle car fleet size used to mine a particular panel width is optimal in different segments of the panel; (3) test the hypothesis that binary integer linear programming (BILP) can be used to account for mining risk in R&P long range mine production sequencing; and (4) …

Subterranean Photobioreactors For Commercial-Industrial Scale Algal Culture, Daniel James Vidt

Doctoral Dissertations

"There are many potential benefits to the mining industry accruing from the application of algal biotechnology. The main benefits are in the production of biodiesel and in the remediation of mining brownfields. The research in this study was centered in the original idea that these brownfields represent a tremendous opportunity for use as a hybrid model for redevelopment into sustainable "mines" of biomass. The ability of these underground spaces serving as bioreactors to control all aspects of the growing environment, from lighting, to temperature, to biosecurity, are key advantages that have been identified in the literature. The many benefits inherent …

Studies On Flocculation Of Fine Mineral Tailings Using Novel Polyacrylamide Based Polymer, Simin Khatibi

Masters Theses

"One of the important features in managing or treating sulfide fine tailings is separating solids from liquid by settling test. This thesis presents results of studied conducted on flocculation of Kaolin suspensions (a model tailings) and sulfide mineral tailings. Two polymers (PAM and Al-PAM) were tested as flocculants. The zeta potential value of slurries was measured by Nano Zetasizer device.

Al-PAM was found to be more effective for flocculation of kaolinite samples and also sulfide samples while PAM with used concentration was not. This study represents the power of flocculation as a possible solution to deal with industrial tailings"--Abstract, page …

Dynamic Impact Of Ageing Dump Truck Suspension Systems On Whole-Body Vibrations In High-Impact Shovel Loading Operations, Saeid R. Dindarloo

Doctoral Dissertations

"Surface mining operations typically deploy large shovels, with 100+ tons per pass capacity, to load dump trucks in a phenomenon described as high-impact shovel loading operations (HISLO). The HISLO phenomenon causes excessive shock and vibrations in the dump truck assembly resulting in whole body vibration (WBV) exposures to operators. The truck suspension system performance deteriorates with time; therefore their effectiveness in attenuating vibrations reduces. No research has been conducted to study the impact of ageing suspension mechanisms on the magnitudes of WBV in HISLO operations.

This study is a pioneering effort to provide fundamental and applied knowledge for understanding the …

Modeling Explosive Lensing On A Cylindrical Body In Air: A First Step Towards Sealing An Underwater Offshore Oil Spill, Phillip R. Mulligan

Doctoral Dissertations

"In 2010, the British Petroleum (BP) Deepwater Horizon accident leaked oil into the Gulf of Mexico for 87 days. A fast response method that can seal an oil pipe and stop the release of oil is needed in order to prevent future oil leaks from turning into ecological and financial disasters. Explosives can serve this need.

This research examined how a circular implosive discontinuous explosive lens interacts with a cylindrical surface. The following research was designed to study the applicability of the Method this author developed to predict the peak pressure from multiple shockwaves converging on a centrally located cylinder. …

Degradation Of Organic Pollutants And Microorganisms From Wastewater Using Different Dielectric Barrier Discharge Configurations—A Critical Review, Emile S.Massima Mouele, Jimoh O. Tijani, Ojo O. Fatoba, Leslie F. Petrik

Mining Engineering Faculty Research & Creative Works

The growing global drinking water crisis requires the development of novel advanced, sustainable, and cost-effective water treatment technologies to supplement the existing conventional methods. One such technology is advanced oxidation based on dielectric barrier discharge (DBD). DBD such as single and double planar and single and double cylindrical dielectric barrier configurations have been utilized for efficient degradation of recalcitrant organic pollutants. The overall performance of the different DBD system varies and depends on several factors. Therefore, this review was compiled to give an overview of different DBD configurations vis-a-viz their applications and the in-situ mechanism of generation of free reactive …

Design Of Push–Pull System To Control Diesel Particular Matter Inside A Dead-End Entry, Yi Zheng, Magesh Thiruvengadam, Hai Lan, Jerry C. Tien

Mining Engineering Faculty Research & Creative Works

Diesel particulate matter (DPM) is considered to be carcinogenic after prolonged exposure. With more diesel-powered equipment used in underground mines, miners' exposure to DPM has become an increasing concern. This paper used computational fluid dynamics method to study the DPM dispersion in a dead-end entry with loading operation. The effects of different push–pull ventilation systems on DPM distribution were evaluated to improve the working conditions for underground miners. The four push–pull systems considered include: long push and short pull tubing; short push and long pull tubing, long push and curved pull tubing, and short push and curved pull tubing. A …

Microstructure And Geotechnical Properties Of St. Peter Sandstone In Clayton, Iowa, Amir Hossein Bagherieh

Doctoral Dissertations

"The St. Peter Sandstone is significantly different from the minerals and rocks which have been studied extensively in mining. It is brittle and characterized by an unusually high friction angle. On the other hand it is friable, and it is nearly cohesionless. The scarcity of the ground control techniques for this particular mining environment has created many difficulties for mine operators. This research aims to establish a fundamental understanding of the basic mechanical and strength properties of the St. Peter Sandstone for engineering design and scientific research. The specific objectives are 1) characterizing the strength of the St. Peter Sandstone, …

The Effects Of Physical Flash Hole Deviations On Factory-Grade Rifle Ammunition, Nicolaas Martin Schrier

Masters Theses

"The objective of this research is to determine the effect of dimensional and positional changes of the primer flash hole on the performance of factory-grade rifle ammunition. The studied variables were flash hole diameter, offset from center, and orientation of the offset in the primer pocket. Cartridge performance was quantified by measuring muzzle velocity, chamber pressure, and target grouping size (precision).

Five different flash hole diameters were tested for both the Remington .223 and Winchester .308 calibers: 1.4mm, 2.0mm (the Fiocchi standard), 2.4mm, 2.8mm, and 3.0mm. Each diameter was tested at three offsets: centered (no offset), 0.5mm from center, and …

Detecting Diesel Particulate Matter Using Real Time Monitoring Under The Influence Of An Exhaust Fan System, Yasir Helal Alghamdi

Masters Theses

"Diesel Particulate Matter (DPM) is a complex mixture of diesel exhaust gas that consists of carbon, ash, metallic abrasion particles, sulfates and silicates. The diesel soot particle includes a solid core made of elemental carbon, and organic carbon compound attached to the surface of the soot particle. The main source of DPM is diesel exhaust gas. The National Institute for Occupational Safety and Health (NIOSH) and the Environmental Protection Agency (EPA) have determined that DPM is the source of most of the emissions of carbon monoxide, carbon dioxide, oxide of nitrogen, and hydrocarbons in underground coal, metal and non metal …

The Effects Of Short Delay Times On Rock Fragmentation In Bench Blasts, Margaret Ruth Hettinger

Masters Theses

"Optimized rock fragmentation is essential for minimizing downstream costs to mining operations. Photographic fragmentation analysis, vibration monitoring, and high-speed video all provide measurements of blast effectiveness and supply data that allows operations to modify blasts to achieve downstream goals.

This study evaluates the effects of short hole-to-hole delay times on rock fragmentation. Photographic fragmentation analysis and various delay times were used on the same bench blast, the effects of timing on fragmentation were determined. This analysis provides a representative understanding of timing effects on fragmentation in the field, different from previous blast models which either negate the effects of timing …

Studies On The Role Of Organic-Inorganic Hybrid Polyacrylamides In Fine Coal Flotation, Ontlametse Kenneth Molatlhegi

Masters Theses

"The current study investigated the effect of novel organic/inorganic (hybrid) polyacrylamide polymer as ash (slimes) depressant in fine coal flotation for the possibility to enhance the combustible recovery and ash rejection. Raw coal samples contain about 25% of ash-forming minerals were crushed, grinded to -75um and floated in the presence of in-house synthesized hybrid Polyacrylamide (Al(OH)₃-PAM or Al-PAM) at different operational parameters. Denver flotation cell with a 5-Liters capacity was used and the parameters investigated include: Al-PAM dosage, Al-PAM conditioning time, dual use of Al-PAM and a dispersant, impeller rotation speed and pulp's pH. For comparison purposes, commercially …

The Impact Of A Strong Local Supply Chain On Regional Economic Impacts Of Mining, Meiyu Xing

Masters Theses

"With growing social conflicts due to social and environmental concerns mines need to be able to create shared value for all stakeholder in their quest to promote sustainable development. Given the sensitivity of a mine's regional economy contribution to its supply chains, any improvement in supply chains strategy will be beneficial for mines and their stakeholders. The objectives of this work were to: (i) test the hypothesis that supply chain management strategy, by mines in a region, significantly affects regional economy; and (ii) develop a methodology to identify the critical backward commodities of a regional mining sector.

Valid methods have …

Simulation Of Dpm Distribution In A Long Single Entry With Buoyancy Effect, Yi Zheng, Magesh Thiruvengadam, Hai Lan, Jerry Tien C.

Mining Engineering Faculty Research & Creative Works

Diesel particulate matter (DPM) is considered carcinogenic after prolonged exposure. With more diesel-powered equipment used in underground mines, miners' exposure to DPM has become an increasing concern. This paper used computational fluid dynamics (CFD) method to study DPM distribution based on an experiment conducted by the Diesel Emissions Evaluation Program (DEEP) in Canada. Twenty-four cases were simulated where the emissions from both truck and load-haul-dumps (LHDs) were examined. Each vehicle was placed in two stream wise locations, and the vehicles were oriented either facing or with the rear end toward the main fresh airflow. A species transport model with buoyancy …

Describing Local Community Acceptance With Discrete Choice Theory For Enhanced Community Engagement, Sisi Que

Doctoral Dissertations

This research sought to facilitate improved community (stakeholder) analysis by providing further insight on the determinants of local community acceptance using discrete choice theory. Specifically, the goals were to: (1) Identify, classify, and verify the important project characteristics and key demographic factors which affect local community acceptance of a mining project; (2) Account for the large number of relevant factors inherent in discrete choice experiments for mining community acceptance evaluation; and (3) Examine discrete choice models to select the most appropriate model for mining community consultation. The research will test the hypotheses that various discrete choice models can describe the …

Numerical Study On Scaling Effects And Decoupled Network-Based Simulation Of Gaseous Explosion, Liang Wang

Doctoral Dissertations

"This research seeks to improve the prediction efficiency of gaseous explosions realized by numerical simulations in a full-scale underground network using a decoupled method. To provide quick predictions of overpressure distribution of methane explosions in underground airway networks, a two-section theory is employed. The explosion space is divided into a driver section and a blast-wave section. Governing equations including conservation of mass, momentum, and energy, together with chemical reaction and turbulence models are solved for the driver and the blast-wave sections using computational fluid dynamics (CFD) solver ANSYS Fluent (3D-based) and Flowmaster (1D-based) respectively. The three dimensional (3D) and one …

A Novel Powder Factor Based Bench Blast Design Method For Large Surface Coal Mines, Andrew Clifford Blair

Doctoral Dissertations

"Large surface coal mines in Wyoming's Powder River Basin ship millions of tons of coal per annum, moving millions of cubic yards of overburden to mine the coal. Much of this volume is blasted in the form of benches, a common mining technique. Increases in production and scale of equipment in the past thirty-five years have created a paradigm shift for drill and blast personnel at these large surface mines, and the explosives industry has yet to create a blast design method specifically tailored for large surface coal mine bench blasting.

This research examines the typical scale of bench blasting …

The Relative Effect Of Charge Dimensions On Elastic Vibration Attenuation And Blast-Induced Seismic Energy Concepts, Nathan Thomas Rouse

Doctoral Dissertations

"This dissertation focuses on expanding the blasting industry's current understanding of the effect of charge geometry on blast vibration attenuation. The work includes a multiple regression analysis of a sample population of signature hole blast vibration data. The regression analysis is used to identify the relative effect of the variables that affect blast vibrations at various distances from the charge. The study suggests that the most common vibration models used in the blasting industry do not use all of the statistically significant variables. Therefore, the models neglect to fully describe the relationship between the significant variables and the blast vibration. …

Analysis Of Effects Of Surface Roughness And Local Surface Imperfections On Measured Pressure, Laurin Ashley Bookout

Doctoral Dissertations

"When tests using pressure to characterize the performance or effects of an explosive are conducted in laboratory or other small scale, highly controlled settings, it is expected that any gages will be ideally mounted and there will not be any surface imperfections or roughness near the gage location. However, when explosive tests are scaled up, the test beds typically do not have perfect surfaces. Instead there may be rough surfaces with various types of geometry or situations where it is extremely difficult to get the gage flush mounted with a flat surface. In a time where tests with multiple replications …

A Review Of Combined Advanced Oxidation Technologies For The Removal Of Organic Pollutants From Water, Jimoh O. Tijani, Ojo O. Fatoba, Godfrey Madzivire, Leslie F. Petrik

Mining Engineering Faculty Research & Creative Works

Water pollution through natural and anthropogenic activities has become a global problem causing short-and long-term impact on human and ecosystems. Substantial quantity of individual or mixtures of organic pollutants enter the surface water via point and nonpoint sources and thus affect the quality of freshwater. These pollutants are known to be toxic and difficult to remove by mere biological treatment. To date, most research on the removal of organic pollutants from wastewater were based on the exploitation of individual treatment process. This single-treatment technology has inherent challenges and shortcomings with respect to efficiency and economics. Thus, application of two advanced …

Depolarization Mechanisms Of Pbzr0.52ti0.48o3 And Pbzr0.95ti0.05o3 Poled Ferroelectrics Under High Strain Rate Loading, Sergey I. Shkuratov, Jason Baird, Vladimir G. Antipov, Evgueni F. Talantsev, Hwan R. Jo

Mining Engineering Faculty Research & Creative Works

Stress-induced and thermal-induced depolarization studies along with X-ray diffraction were performed on lead zirconate titanate ferroelectrics of different compositions, PbZr_0.52Ti_0.48O₃ (PZT 52/48) and PbZr_0.95Ti_0.05O₃ (PZT 95/5). Specimens were shocked loaded perpendicular to the polarization vector. It was found that the polarity of the stress-induced charge released by PZT 52/48 and 95/5 was opposite to the polarity of the charge generated due to the piezoelectric effect. PZT 52/48 was only partially (45%) depolarized under 1.5±0.1 GPa mechanical compression, as opposed to PZT 95/5 which was fully depolarized. The experimental results indicate …

Test Development To Determine The Feasibility Of Rubber Tractor Treads For Use As Blasting Mats, Matthew Kurtis Coy

Masters Theses

"The objective of this thesis was to determine if rubber tractor treads could be used as an alternative material for blasting mats. These treads are made from steel cable and vulcanized rubber and are very tough. However, once they reach the end of their life on mobile equipment, they are destined for a landfill, or dump site because they are too tough to recycle. A potential alternative use for them is as blasting mats.

An examination of existing mat designs was conducted to better understand the matting methods used by the blasting industry today, to learn from those designs allow …

An Analysis Of Burn Cut Pull Optimization Through Varying Relief Hole Depths, Michael Robert Allen

Masters Theses

"In underground blasting, the pull of the initial cut is the limiting factor for the success of the rest of the round. By improving the pull of the first cut, a critical step is made towards improving the entire round. This project attempted to optimize a burn cut's effective pull by varying the depths of the relief holes in the burn, and then analyzing the results. In testing, relief holes were drilled to depths both shorter and longer than that of the cut's charged holes. The overall objective was to consistently achieve greater pull than in a standard burn, using …

Analysis Of A Ventilation Network In A Multiple Fans Limestone Mine, Ali Haghighat

Masters Theses

"As mining progresses the total resistance of an excavation is increased, the mine characteristic curve becomes steeper, and the operating point moves up the fan curve, reducing the total air quantity and increasing the system pressure. For multi-level ventilation networks with a number of fans the process can be tedious, and on a count of numerous dependent factors the optimal combination of fans is very hard to be achieved. The design of a ventilation network in conjunction with multi surface fans and booster fans entails a complex procedure.

The objective of this study is to provide a plan to improve …

The Effects Of Advanced Structural Materials To Mitigate Explosive And Impact Threats, Caleb Michael Baumgart

Masters Theses

"In a world of ever newer and modified improvised explosive devices (IEDs) that are very common in certain parts of the world, it is always more important to improve the devices used for protection. This research endeavors to design and analyze a blast barrier using three different media types to mitigate the high pressures from an IED or a car bomb. The three media types used in this research are pumice, steel grit, and foam. Six barriers were built to test the three media types and account for the changes from a standard solid concrete barrier to a barrier with …

Behavior In Air Leakage And Recirculation Under The Influence Of Booster Fans, Koziba Feledi

Masters Theses

"A booster fan is an underground mechanical ventilation equipment installed in series with a main surface fan that is used to boost the air pressure provided by the surface main fan passing through it. As mining continues to expand and go deeper, the need for improved and efficient ventilation increases. This has led to the use of booster fans and other auxiliary ventilation devices in underground mines. Research defining how system leakage and recirculation are affected by booster fans; describing how system leakage and recirculation are affected by the location, placement, and amount of air pressure from the booster fans; …

A Modified Initiation And Cut Profile Study Of The 10500 Grain Per Foot Linear Shaped Charge, Matthew Ortel

Masters Theses

"A 10,500 grain per foot (gr/ft.) linear shaped charge (LSC) was developed to cut targets that were too thick for smaller LSC. The manufacturer observed shallower penetration from the 10,500 gr/ft. LSC than was expected. This prompted investigations to uncover the cause of the perceived reduced performance.

A study performed at the Missouri University of Science and Technology changed the initiation method of the 10,500 gr/ft. charge to increase the cut performance of the charge. A modified two point, single end initiation method was devised and tested. This initiation method was termed "dual initiation" and focused on creating a planar …