Mining Engineering Commons^™

Detonation Synthesis Of Alpha-Variant Silicon Carbide, Martin Langenderfer, Catherine E. Johnson, William Fahrenholtz, Vadym Mochalin

Mining Engineering Faculty Research & Creative Works

A recent research study has been undertaken to develop facilities for conducting detonation synthesis of nanomaterials. This process involves a familiar technique that has been utilized for the industrial synthesis of nanodiamonds. Developments through this study have allowed for experimentation with the concept of modifying explosive compositions to induce synthesis of new nanomaterials. Initial experimentation has been conducted with the end goal being synthesis of alpha variant silicon carbide (α-SiC) in the nano-scale. The α-SiC that can be produced through detonation synthesis methods is critical to the ceramics industry because of a number of unique properties of the material. Conventional …

Enhancing Manual P-Phase Arrival Detection And Automatic Onset Time Picking In A Noisy Microseismic Data In Underground Mines, Charles Mborah, Maochen Ge

Mining Engineering Faculty Research & Creative Works

Accurate detection and picking of the P-phase onset time in noisy micro seismic data from underground mines remains a big challenge. Reliable P-phase onset time picking is necessary for accurate source location needed for planning and rescue operations in the event of failures. In this paper, a new technique based on the discrete stationary wavelet transform (DSWT) and higher order statistics is proposed for processing noisy data from underground mines. The objectives of this method are to (i) improve manual detection and picking of P-phase onset; and (ii) provide an automatic means of detecting and picking P-phase onset time accurately. …

The Status Of The Local Community In Mining Sustainable Development Beyond The Triple Bottom Line, Sisi Que, Liang Wang, Kwame Awuah-Offei, Yao Chen, Wei Yang

Mining Engineering Faculty Research & Creative Works

Mineral products provide essential fuels and raw materials for industrialization and our daily life, but their influences on other aspects of life need to be taken into consideration. While the whole world benefits from mining's contributions, most of the resulting detrimental impacts on the environment and society fall on the local communities. The participation of the local community is one solution to decrease the risks from community-related problems. Subsequently, the requirements of mining sustainable development can be met. A literature review was conducted on mining sustainability and stakeholder participation, and the shortcomings of existing research and difficulties of further study …

Multi-Auv Cooperative Target Hunting Based On Improved Potential Field In A Surface-Water Environment, Hengqing Ge, Guibin Chen, Guang Xu

Mining Engineering Faculty Research & Creative Works

In this paper, target hunting aims to detect target and surround the detected target in a surface-water using Multiple Autonomous Underwater Vehicles (multi-AUV) in a given area. The main challenge in multi-AUV target hunting is the design of AUV's motion path and coordination mechanism. To conduct the cooperative target hunting by multi-AUV in a surface-water environment, an integrated algorithm based on improved potential field (IPF) is proposed. First, a potential field function is established according to the information of the surface-water environment. Then, the dispersion degree, the homodromous degree, and district-difference degree are introduced to increase the cooperation of the …

Study On The Effect Of Iron-Based Deoxidizing Inhibitors For Coal Spontaneous Combustion Prevention, Chaoyu Hao, Yanling Chen, Jiren Wang, Cunbao Deng, Guang Xu, Fengwei Dai, Rui Si, Hongfei Wang, Haoyu Wang

Mining Engineering Faculty Research & Creative Works

To improve the prevention of spontaneous coal combustion, reduced iron powder and other ingredients should be added together to form an iron-based deoxidizing inhibitor, with the dual effect of oxygen consumption and inhibition. The oxygen consumption rate of the inhibitor was studied through experiments. According to the theory of coordination resistance, the coordination resistance of Fe³⁺ was studied via the density functional method. Subsequently, a comparative experiment of the effects on spontaneous coal combustion was conducted. The research shows that several kinds of common resistance agents that are added to the reduced iron powder can consume oxygen. However, the …

Review Of The Methods For Determination Of Reactive Oxygen Species And Suggestion For Their Application In Advanced Oxidation Induced By Dielectric Barrier Discharges, Emile S. Massima Mouele, Olanrewaju Ojo Fatoba, Omotola Babajide, Kassim O. Badmus, Leslie F. Petrik

Mining Engineering Faculty Research & Creative Works

Advanced oxidation processes (AOPs) particularly non-thermal plasmas based on electrical discharges have been widely investigated for water and wastewater treatment. Dielectric barrier discharges (DBDs) generate large amounts of selective and non-selective reactive oxygen species (ROS) such as ozone, hydrogen peroxide, atomic oxygen, superoxide molecular anions and hydroxyl radicals, having been proved to be efficient for water decontamination among various forms of electrical discharge systems. The detection and quantification methods of these oxygen species in non-thermal plasmas have been reviewed. However, their application in dielectric barrier discharge has not been well studied. It is therefore imperative to summarize the various detection …

Complete Stress-Induced Depolarization Of Relaxor Ferroelectric Crystals Without Transition Through A Non-Polar Phase, Sergey I. Shkuratov, Jason Baird, Vladimir G. Antipov, Wesley Hackenberger, Jun Luo, Shujun Zhang, Christopher S. Lynch, Jay B. Chase, Hwan R. Jo, Christopher C. Roberts

Mining Engineering Faculty Research & Creative Works

The development of relaxer ferroelectric single crystal technology is driven by the ability to tailor ferroelectric properties through domain engineering not achievable in polycrystalline materials. In this study, three types of domain-engineered rhombohedral Pb (In_1/2Nb_1/2) O₃-Pb (Mg_1/3Nb_2/3) O₃-PbTiO₃ crystals were subjected to transverse high strain rate loading. The experimental results indicate that the domain configuration has a significant effect on the stress-induced depolarization and the associated charge released. A complete depolarization of the single-domain crystals with 3m symmetry is observed, while multidomain crystals with 4mm and mm2 …

Focus Energy Determination Of Mining Microseisms Using Residual Seismic Wave Attenuation In Deep Coal Mining, Mingwei Zhang, Shengdong Liu, Shuzhao Chen, Yanlong Chen, Guang Xu, Deyu Qian

Mining Engineering Faculty Research & Creative Works

Based on the energy attenuation characteristics of residual wave in deep rock, a method was developed to determine the microseismic focus energy. Differential energy loss in infinitesimal spreading distance is logically deduced, upon which energy attenuation equation was established. With a logarithmic transformation, a linear relation of the residual seismic energy with distance is formulated. Its intercept was used to determine the microseismic focus energy. The result is compared with that determined by the energy density method. The reliability of the determined focus energy and the impact of the built-in velocity threshold on the residual wave energy computation are discussed. …

The Effect Of Overloading On Reliability Of Wheel Loader Structural Components, Eric Raymond Achelpohl

Doctoral Dissertations

"This research attempts to provide a fundamental understanding into the relationship between the productivity of material handling equipment, specifically wheel loaders, and their ability to operate reliably when subjected to high overload conditions. The overall aim is to determine the effect of overloading the bucket on wheel loader reliability. The specific objectives of the research are to: 1) evaluate the effect of overloading the bucket on wheel loader productivity; 2) examine the effect of overloading the bucket on hydraulic pressures in the hoist cylinders (used as a proxy for forces on a wheel loader); and 3) investigate the effect of …

Dragline Excavation Simulation, Real-Time Terrain Recognition And Object Detection, Godfred Somua-Gyimah

Doctoral Dissertations

"The contribution of coal to global energy is expected to remain above 30% through 2030. Draglines are the preferred excavation equipment in most surface coal mines. Recently, studies toward dragline excavation efficiency have focused on two specific areas. The first area is dragline bucket studies, where the goal is to develop new designs which perform better than conventional buckets. Drawbacks in the current approach include operator inconsistencies and the inability to physically test every proposed design. Previous simulation models used Distinct Element Methods (DEM) but they over-predict excavation forces by 300% to 500%. In this study, a DEM-based simulation model …

Computational Modeling Of Heat Transport And Volatile Extraction From Asteroid Materials, Joel C. Sercel, Mark A. Crawford, Christopher Dreyer, Egboche Unobe, Robert Jedicke, Stanley Love, Leslie S. Gertsch

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

This paper presents the results of a program of computational modeling focused on elucidating the physics and chemical processes associated with the extraction of volatile materials from asteroid feedstocks with an eye toward use of the extracted materials for propulsion, radiation shielding, and replenishment of mission consumables. We present a math model of conductive heat transport, chemical processes, and gas escape by Darcian diffusion. Chemical processes in the model include pyrolysis of organic chemical constituents and thermal dehydration and decarbonization of hydrates and carbonates. The model is implemented in a spherical finite difference computational engine that predicts time histories of …

Management Of Coal Dust Explosions In United States' Coal Mines Using Bag Type Passive Explosion Barriers, Jay Robert Schafler

Masters Theses

"The most significant and powerful hazard that exists in an underground coal mine is a coal dust explosion. A coal dust explosion has the potential to propagate throughout a mine resulting in massive damage to the mine and equipment, as well as tragic loss of life. An assessment of current global regulations and practices uncovered four main control methods utilized to prevent coal dust explosions in coal mines world-wide. The United States is one of the few countries that does not regulate or employ all four of these safety practices. Additionally, a review of past research into coal dust explosions …

Computational Dynamics And Virtual Dragline Simulation For Extended Rope Service Life, Muhammad Wardeh

Doctoral Dissertations

"The dragline machinery is one of the largest equipment for stripping overburden materials in surface mining operations. Its effectiveness requires rigorous kinematic and dynamic analyses. Current dragline research studies are limited in computational dynamic modeling because they eliminate important structural components from the front-end assembly. Thus, the derived kinematic, dynamic and stress intensity models fail to capture the true response of the dragline under full operating cycle conditions. This research study advances a new and robust computational dynamic model of the dragline front-end assembly using Kane's method. The model is a 3-DOF dynamic model that describes the spatial kinematics and …

Calibration Of Mine Ventilation Network Models Using The Non-Linear Optimization Algorithm, Guang Xu, Jinxin Huang, Baisheng Nie, Duncan Chalmers, Zhuoming Yang

Mining Engineering Faculty Research & Creative Works

Effective ventilation planning is vital to underground mining. To ensure stable operation of the ventilation system and to avoid airflow disorder, mine ventilation network (MVN) models have been widely used in simulating and optimizing the mine ventilation system. However, one of the challenges for MVN model simulation is that the simulated airflow distribution results do not match the measured data. To solve this problem, a simple and effective calibration method is proposed based on the non-linear optimization algorithm. The calibrated model not only makes simulated airflow distribution results in accordance with the on-site measured data, but also controls the errors …

Impact Of Nanobubbles On Mechanical Coal Flotation Process, Ahmed Sobhy, Dongping Tao

Mining Engineering Faculty Research & Creative Works

A bank of three 10-liter mechanical flotation cells integrated with nanobubble technology was investigated to assess the impact of nanobubbles on coal separation performance at different operating variables. The most significant operation parameters such as fuel oil collector dosage, methyl isobutyl carbinol (MIBC) frother concentration, flow rate to nanobubble generator, feed solid concentration, and feed flow rate were studied individually. Nanobubbles are generated selectively on the hydrophobic particles, which should have a positive effect on flotation separation efficiency. It has been shown that frother concentration, collector dosage, and flow rate to nanobubble generator had a positive and significant effect on …

Assessment Of The Physical And Chemical Qualities Of Brine And The Application Of Nano Zerovalent Iron For The Treatment Of Brine Effluent, M. J. Alegbe, O. S. Ayanda, P. Ndungu, O. O. Fatoba, A. Nechaev, L. F. Petrik

Mining Engineering Faculty Research & Creative Works

The arbitrary discharge of brine effluent from reverse osmosis treatment plants impacts negatively to the environment due to its high salinity. In the present study, brine effluent obtained from eMalahleni treatment plant, South Africa, was analyzed by pH, electrical conductivity and total dissolved solids measurements. The ion chromatography and the inductively coupled plasma optical emission spectroscopy were also used to examine the anion and cation content of the brine effluent. The analysis of major cations and anions indicated that the brine water quality was above the target water quality range for potable water. Geochemical modelling of the brine effluent classified …

Mitigation Of Environmental Hazards Of Sulfide Mineral Flotation With An Insight Into Froth Stability And Flotation Performance, Muhammad Badar Hayat

Doctoral Dissertations

"Today's major challenges facing the flotation of sulfide minerals involve constant variability in the ore composition; environmental concerns; water scarcity and inefficient plant performance. The present work addresses these challenges faced by the flotation process of complex sulfide ore of Mississippi Valley type with an insight into the froth stability and the flotation performance. The first project in this study was aimed at finding the optimum conditions for the bulk flotation of galena (PbS) and chalcopyrite (CuFeS₂) through Response Surface Methodology (RSM). In the second project, an attempt was made to replace toxic sodium cyanide (NaCN) with the biodegradable chitosan …

Discrete Element And Artificial Intelligence Modeling Of Rock Properties And Formation Failure In Advance Of Shovel Excavation, Muhammad Waqas

Doctoral Dissertations

"Rock tests are performed before the start of every mining or civil engineering project as part of a detailed feasibility study. The feasibility study is costly and it comprises drilling, sample collection, sample handling and laboratory testing. Numerical modeling techniques, such as Particle Flow Code (PFC), can be used to provide reliable estimates of rock strength values. The numerical models for unconfined compressive strength (UCS), direct tension, and Brazilian tests were developed in PFC, and validated using data from literature. A particle size range of 3-5 mm with D_max/D_min = 1.67 gave the best results. The numerical …

Correlation Between Delay Time And Measured Concentration And Concentration Uncertainty By Neutron Activation Analysis, James Thomas Seman

Doctoral Dissertations

"For the last several decades, it has been apparent that new methods of identifying explosives can help investigators trace their origins. One way to identify an explosive is through the use of taggants: materials added to a product that encodes information about the product such as when it was manufactured.

This research investigates the survivability of a new identification taggant called the Nuclear Barcode that overcomes some of the downfalls that have been identified in prior taggants. The Nuclear Barcode encodes information as a unique combination of concentrations of rare earths (Ho, Eu, Sm, Lu, and Dy) and precious metals …

Imaging And Mitigating Karst Features, Kenneth Joseph Bansah

Doctoral Dissertations

"Over the last three years, a comprehensive subsurface investigation that combines both conventional and geophysical techniques has been conducted near Springfield in southwest Missouri, United States. This study, which forms part of the comprehensive subsurface investigation, aimed to (1) image and characterize the subsurface, (2) map variations in engineering properties of soil/rock, (3) map variable depth to top of rock, (4) explore the utility of the geophysical techniques, (5) determine the factors contributing to karst processes, and (6) propose karst mitigation. Electrical resistivity tomography (ERT) and multichannel analysis of surface waves (MASW) were employed for the acquisition of subsurface geophysical …

A New Signal Processing Method For Acoustic Emission/Microseismic Data Analysis, Charles Mborah

Doctoral Dissertations

"The acoustic emission/microseismic technique (AE/MS) has emerged as one of the most important techniques in recent decades and has found wide applications in different fields. Extraction of seismic event with precise timing is the first step and also the foundation for processing AE/MS signals. However, this process remains a challenging task for most AE/MS applications. The process has generally been performed by human analysts. However, manual processing is time consuming and subjective. These challenges continue to provide motivation for the search for new and innovative ways to improve the signal processing needs of the AE/MS technique. This research has developed …

Exploring The Use Of A Time-Frequency Domain Technique For The Filtering Of Acoustic Emission/Microseismic Data, Charles Mborah, Maochen Ge, Zhigang Wang

Mining Engineering Faculty Research & Creative Works

The performance of acoustic emission/micro seismic (AE/MS) monitoring systems in mines is greatly impacted by background noise interference. Mine trucks/vehicles, fans, blasting and electrical spikes generate noise which negatively affect AE/MS signal quality. Using such datasets without filtering may lead to inaccurate determination of first arrivals and hence wrong source location. Also, data contaminated with noise makes manual identification and picking of the first arrivals impossible or difficult to achieve. This paper explored the use of stationary discrete wavelet transform as a filter to augment noise reduction on mine AE/MS data. The output of a test run on both noisy …

Shockwave Interaction With A Cylindrical Structure, Phillip R. Mulligan

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

An increased understanding of the shockwave interaction with a cylindrical structure is the foundation for developing a method to explosively seal a pipe similar to the Deepwater Horizon accident in the Gulf of Mexico. Shockwave interactions with a cylindrical structure have been a reoccurring focus of energetics research. Some of the most notable contributions of non-destructive tests are described in ``The Effects of Nuclear Weapons'' (Glasstone, 1962). The work presented by Glasstone examines shockwave interaction from a 20-megaton bomb with a cylindrical structure. However, the data is limited to a peak overpressure of less than 25 psi, requiring several miles …

Effect Of Explosive Charge Geometry On Shockwave Propagation, Catherine E. Johnson, Phillip R. Mulligan, Kelly Williams, Martin Langenderfer, Jeffrey Heniff

Mining Engineering Faculty Research & Creative Works

With advancements in the 3D printing of explosives, the understanding how the shape of an explosive charge influences the energy expansion and subsequently the focusing of energy is becoming increasingly more important. Theoretically, explosive charges could be printed to focus the energy on targets of interest or to synthesize nanomaterials. The first step to quantifying the energy expansion and shock wave convergences for a 3D printed charge is to examine simple geometries of traditional explosive charges (non-3D printed). Detonation of 15 PETN-based primasheet charges in the spherical, cubic, cylindrical, and tetrahedral configurations have been examined in this study. Qualitative data …

Crustal Thickness Beneath Libya And The Origin Of Partial Melt Beneath As Sawda Volcanic Province From Receiver Function Constraints, Awad A. Lemnifi, Abdelsalam Elshaafi, John Browning, Nassib Aouad, Saad K. El Ebaidi, Kelly K. Liu, Agust Gudmundsson

Mining Engineering Faculty Research & Creative Works

This study investigates crustal thickness and properties within the Libyan region. Results obtained from 15 seismic stations belonging to the Libyan Center for Remote Sensing and Space Science are reported, in addition to 3 seismic stations publically available, using receiver functions. The results show crustal thicknesses ranging from 24 km to 36 km (with uncertainties ranging between ±0.10 km and ±0.90 km). More specifically, crustal thickness ranges from 32 km to 36 km in the southern portion of the Libyan territory then becomes thinner, between 24 km and 30 km, in the coastal areas of Libya and thinnest, between 24 …

Electrospinning: Polymer Nanofibre Adsorbent Applications For Metal Ion Removal, O. K. Pereao, C. Bode-Aluko, G. Ndayambaje, O. Fatoba, L. F. Petrik

Mining Engineering Faculty Research & Creative Works

In recent decades, electro spun nanofibers have been applied to different potential fields such as sensor devices, tissue engineering scaffolds, wound dressing, filtration, drug delivery, etc. and significant review papers have been published in these fields. However, the use of electro spun nanofibers in metal ion adsorption is emerging and comparatively innovative. Nanofiber materials hold great potential in advancing the growth of metallurgical technologies and progress for the separation of metallic ions from various sources. The Physico-chemical removal processes of adsorption use nanofibers due to their large surface area to volume ratio and the availability of a wide variety of …

Time Effect Of Water Injection On The Mechanical Properties Of Coal And Its Application In Rockburst Prevention In Mining, Xiaofei Liu, Guang Xu, Chong Zhang, Biao Kong, Jifa Qian, Dong Zhu, Mingyao Wei

Mining Engineering Faculty Research & Creative Works

Coal seam water injection is widely used to prevent rockbursts in coal mines, and the duration of water injection is an important parameter related to the effectiveness of rockburst prevention, making it of practical importance to optimize the effective water injection duration. This paper presents the test results of the mechanical properties and pore structure of samples with different soaking time, obtained from a working face where rockburst occurred. Soaking time changes the mechanical properties of samples, and this time effect differs with the coal size (from centimeter to nanometer size). Results of numerical simulation and on-site tests in the …

Degradation Of Bisphenol-A By Dielectric Barrier Discharge System: Influence Of Polyethylene Glycol Stabilized Nano Zero Valent Iron Particles, Jimoh O. Tijani, Massima E.S. Mouele, Ojo O. Fatoba, Omotola O. Babajide, Leslie F. Petrik

Mining Engineering Faculty Research & Creative Works

In this study we report the synthesis and catalytic properties of polyethylene glycol stabilized nano zero valent iron particles (PEG-nZVI) added to the dielectric barrier discharge (DBD) system to induce photo-Fenton process in the degradation of bisphenol A (BPA) in aqueous solution. The influence of operating parameters such as solution pH, initial concentration of the modelled pollutant and PEG-nZVI dosage on the extent of BPA degradation was investigated. The residual concentration of BPA and its intermediates were determined using high performance liquid chromatography (HPLC) and liquid chromatography mass spectrometry (LCMS). The high-resolution scanning electron microscope (HRSEM), x-ray diffraction (XRD), Brunauer-Emmett-Teller …

Effects Of Loading Rate On Gas Seepage And Temperature In Coal And Its Potential For Coal-Gas Disaster Early-Warning, Chong Zhang, Xiaofei Liu, Guang Xu, Xiaoran Wang

Mining Engineering Faculty Research & Creative Works

The seepage velocity and temperature externally manifest the changing structure, gas desorption and energy release that occurs in coal containing gas failure under loading. By using the system of coal containing gas failure under loading, this paper studies the law of seepage velocity and temperature under different loading rates and at 1.0 MPa confining pressure and 0.5 MPa gas pressure, and combined the on-site results of gas pressure and temperature. The results show that the stress directly affects the seepage velocity and temperature of coal containing gas, and the pressure and content of gas have the most sensitivity to mining …

Impact Of Coalbed Incidence Angle On Methane Enrichment Zone In Longwall Gob, Shengyong Hu, Ao Zhang, Guorui Feng, Shuwen Guan, Xiangqian Guo, Chao Li, Guang Xu

Mining Engineering Faculty Research & Creative Works

To control methane emissions in gob into longwall working faces, it is necessary to understand the distributions of methane enrichment zones (MEZ) around mined coal seams with different incidence angles. In this paper, FLAC^3D software is used to calculate the three-dimensional stress distributions in MEZ in gobs with coalbed incidence angles ranging from 0° to 50°. The results show that MEZ consistently exhibit a "hexagon" shape, and rotate in a clockwise direction as the coalbed angle increases. The MEZ range above the mined seam is larger than that below the mined seam. As the coalbed angle increases, the MEZ …