Mining Engineering Commons^™

Fundamental Limits To The Transfer Of Energy Harvested From Ferroelectric Materials Under Shock Loading, Sergey I. Shkuratov, Jason Baird, Vladimir G. Antipov, Jay B. Chase

Mining Engineering Faculty Research & Creative Works

Ferroelectrics are capable of producing megawatt power levels under shock loading due to stress-induced phase transformations, resulting in depolarization of the ferroelectric materials. This power can be used for generation of high voltages, high currents, or ultrahigh-power electromagnetic radiation. The results are reported herein on an experimental study of limitations on energy harvested from shocked Pb_0.99(Zr_0.95Ti_0.05)_0.98Nb_0.02O₃ and PbZr_0.52Ti_0.48O₃ ferroelectrics and transferred to external electrical systems. The experimental results indicate that one of the limits to the energy transfer is electric breakdown that occurs within …

Multilayer Pzt 95/5 Antiferroelectric Film Energy Storage Devices With Giant Power Density, Sergey I. Shkuratov, Jason Baird, Vladimir G. Antipov, Shujun Zhang, Jay B. Chase

Mining Engineering Faculty Research & Creative Works

A new type of energy storage devices utilizing multilayer Pb (Zr_0.95Ti_0.05)_0.98Nb_0.02O₃ films is studied experimentally and numerically. To release the stored energy, the multilayer ferroelectric structures are subjected to adiabatic compression perpendicular to the polarization direction. Obtained results indicate that electrical interference between layers (10–120 layers) during stress wave transit through the structures has an effect on the generated current waveforms, but no impact on the released electric charge. The multilayer films undergo a pressure-induced phase transition to antiferroelectric phase at 1.7 GPa adiabatic compression and become completely depolarized, releasing surface …

Measurement And Simulation Study On Effective Drainage Radius Of Borehole Along Coal Seam, Wei Qin, Jialin Xu, Guozhong Hu, Jie Gao, Guang Xu

Mining Engineering Faculty Research & Creative Works

A measurement study was conducted for the effective drainage radius of borehole along coal seam #9 of the Kaiyuan Coal Mine using the gas pressure method and gas flow method. The measurement results show that the effective drainage radius of borehole along coal seam #9 was 0.75 m, 27 days after drainage, and 1.5 m, 92 days after drainage. Experimental schemes were designed for the entire evolution of the stress in the coal mass around the borehole, and an experimental study on methane seepage in the coal mass around borehole was conducted. Fitting functions for the permeability of the coal …

Evaluation Of A 38 L Explosive Chamber For Testing Coal Dust Explosibility, Robert Eades, Kyle A. Perry

Mining Engineering Faculty Research & Creative Works

Coal dust explosions are the deadliest disasters facing the coal mining industry. Research has been conducted globally on this topic for decades. The first explosibility tests in the United States were performed by the Bureau of Mines using a 20 L chamber. This serves as the basis for all standardized tests used for combustible dusts. The purpose of this paper is to investigate the use of a new 38 L chamber for testing coal dust explosions. The 38 L chamber features design modifications to model the unique conditions present in an underground coal mine when compared to other industries where …

A Novel Method Of Using Iron Nanoparticles From Coal Fly Ash Or Ferric Chloride For Acid Mine Drainage Remediation, Crisanda Gilbert, Olushola S. Ayanda, Olanrewaju O. Fatoba, Godfrey Madzivire, Leslie F. Petrik

Mining Engineering Faculty Research & Creative Works

Iron nanoparticles (nano Fe) were extracted from coal fly ash (CFA) or ferric chloride (FeCl3) and used for acid mine drainage (AMD) remediation. Characterization was achieved by X-ray diffraction (XRD), X-ray fluorescence, scanning electron microscopy-energy dispersive spectroscopy (SEM–EDX), high resolution transmission electron microscopy (HRTEM), and the Braunaer–Emmet–Teller (BET) surface area determination. The HRTEM indicated good dispersion of the characteristic bead-like structure of nano Fe. It was also observed that the nano Fe were mainly in the zero-valent oxidation state, as denoted by the characteristic peak at ≈ 44.7° in the XRD analysis; it was accompanied by the generally accepted oxide …

Probing Surface Characteristics Of Rare Earth Minerals Using Contact Angle Measurements, Atomic Force Microscopy, And Inverse Gas Chromatography, Mostafa Khodakarami, Lana Z. Alagha, Daniel J. Burnett

Mining Engineering Faculty Research & Creative Works

Rare earth minerals (REMs) such as bastnaesite, monazite, and xenotime are of considerable significance since they are the main commercial sources for rare earth elements (REEs) with cutting-edge applications. Fundamental understanding of surface properties of REMs is essential to identify the reactions taking place at different interfaces to develop more robust technologies for the recovery of REEs. The goal of this study is to provide a comprehensive investigation on the surface energy characteristics of bastnaesite and xenotime, as the primary sources of light and heavy rare earth elements, respectively. Crystal's orientation of REMs was identified using surface X-ray diffraction analysis, …

Computational Fluid Dynamic Simulation Of Inhaled Radon Dilution By Auxiliary Ventilation In A Stone-Coal Mine Laneway And Dosage Assessment Of Miners, Bin Zhou, Ping Chang, Guang Xu

Mining Engineering Faculty Research & Creative Works

Inhaled radon status in the laneways of some Chinese stone-coal mines is a cause of concern. In this study, computational fluid dynamics simulations were employed to investigate three flowrates of the dilution gas (2.5, 5, and 7.5 m³/s) and radon distributions at realistic breathing levels (1.6, 1.75, and 1.9 m). The results showed that there are obvious jet-flow, backflow, and vortex zones near the heading face, and a circulation flow at the rear of the laneway. A high radon concentration area was found to be caused by the mining machinery. As the ventilation rate increased, the radon concentrations …

The Dependence Of Breakdown Field Upon Breakdown Delay Time In Adiabatically Compressed Ferroelectric Ceramics, Sergey I. Shkuratov, Jason Baird, Vladimir G. Antipov, Jay B. Chase

Mining Engineering Faculty Research & Creative Works

The ability of ferroelectric materials to generate high voltage under mechanical stress is widely used in transducer applications. The high strain-rate adiabatic compression of poled ferroelectrics results in their complete depolarization, the release of surface charges, and the generation of up to hundreds of kilovolts of electric potential that is an order of magnitude higher than in the low-strain piezoelectric mode. Electric breakdown within adiabatically compressed ferroelectric specimens is one of the factors that affect the generation of a high voltage by ferroelectric materials under extreme stress. We report herein the results of experimental investigations of the generation of high …

Study On Safety Control Of Composite Roof In Deep Roadway Based On Energy Balance Theory, Zhengzheng Xie, Nong Zhang, Yuxin Yuan, Guang Xu, Qun Wei

Mining Engineering Faculty Research & Creative Works

Improving the safety and stability of composite roof in deep roadway is the strong guarantee for safe mining and sustainable development of coal mines. With three roadways of different composite roofs in Hulusu Coal Mine and Menkeqing Coal Mine as the research background, this paper explores the mechanical properties and energy dissipation law of coal-rock structures with different height ratios from the perspective of energy release and dissipation through lab experiments. The results indicate that the key to the stability of coal-rock structures lies in maintaining relatively low dissipation energy. Based on experimental results and the energy balance theory, two …

Stress-Induced Depolarization Of Single-Layer Pzt 95/5 Ferroelectric Films, Sergey I. Shkuratov, Jason Baird, Vladimir G. Antipov, Jay B. Chase, Wesley Hackenberger

Mining Engineering Faculty Research & Creative Works

Ferroelectric (FE) films are widely used in electronic devices and low-power FE transducers. There is significant interest in expanding the usage of FE films to ultrahigh-power systems. The results are reported herein on experimental investigations of stress-induced depolarization of single-layer PbZr_0.95Ti_0.05O₃ doped 2% Nb (PZT 95/5) poled FE films subjected to uniaxial adiabatic compression perpendicular and antiparallel to the direction of polarization. It was found that at a stress of 2.4 GPa, the 32-μm-thick films underwent a pressure induced transition to a nonpolar antiferroelectric phase and became completely depolarized in both modes of high strain …

Corporate Social Responsibility: Understanding The Mining Stakeholder With A Case Study, Sisi Que, Liang Wang, Kwame Awuah-Offei, Wei Yang, Hui Jiang

Mining Engineering Faculty Research & Creative Works

The social responsibility of corporate mining has been challenged by a significant socio-political risk from local communities. These issues reduce shareholder value by increasing costs and decreasing the market perception of corporate social responsibility. Community engagement is the process of understanding the behavior and interests of a group of targeted mining communities through surveys and data analysis, with the purpose of incorporating mining community acceptance into the mining sustainability. While mining organizations have discussed community engagement to varying degrees, there are three main shortcomings in current studies, as concluded in the authors' previous research. This paper presents a framework to …

A Mine Main Fans Switchover System With Lower Air Flow Volatility Based On Improved Particle Swarm Optimization Algorithm, Hengqing Ge, Guang Xu, Jinxin Huang, Xiaoping Ma

Mining Engineering Faculty Research & Creative Works

A reliable ventilation system is essential for maintaining a comfortable working environment and ensuring safety production in an underground coal mine. The automated fan switchover technique was developed for changing the main fan for maintenance with lower air flow volatility of underground mine in the switchover process. This article established the optimization model in the main fans switchover process, used the improved particle swarm optimization algorithm to solve the model, and achieved minimum air flow volatility in the fans switchover process. Compared to previous studies, computer simulations have shown that the proposed algorithm can effectively find the global optimal solution …

Multi-Body Dynamic And Finite Element Modeling Of Ultra-Large Dump Truck - Haul Road Interactions For Machine Health And Haul Road Structural Integrity, Bruno Ayaga Kansake

Doctoral Dissertations

"Haul truck capacities have increased due to their economies of scale in large-scale surface mine production systems. Ultra-large trucks impose high dynamic loads on haul roads. The dynamic loads are exacerbated by road surface roughness and truck over-loading. The dynamic forces also subject trucks to high torsional stresses, which affect truck health. Current haul road response models are 2D and use static truckloads for low capacity trucks. Existing 3D models consider the road as a two-layer system. No models capture the truck dynamic effects on haul roads and predict strut pressures during haulage.

Lagrangian mechanics was used to formulate the …

Removal Of Antimony And Bismuth From Copper Electrorefining Electrolyte By Two Proprietary Solvent Extraction Extractants, Andrew Artzer

Masters Theses

"Antimony and bismuth are two of the most problematic impurities in copper electrorefining (ER). Because of this, much research has been done investigating the ways to remove them. Processes that are currently being used industrially include anode additions, liberators, ion exchange (IX), and solvent extraction (SX). Of these, liberators and anode additions are the most common while SX is the least, mostly being used for arsenic removal. There are other methods that have been evaluated, but are not in commercial use. These include the use of various electrolyte additives, and adsorbents such as bentonite clay and heavy metal sulfates.

Two …

Understanding The Connection Between Blasting And Highwall Stability, Robert Quentin Eades, Kyle A. Perry

Mining Engineering Faculty Research & Creative Works

Surface mines continue to implement highwalls for several reasons, such as increasing recovery, improving margins, and justifying higher stripping ratios. Highwall stability is a complex issue that is dependent upon a variety of mining and geologic factors, and a safe design is necessary for a successful surface operation. To improve highwall stability, it is important to understand the connection between local geology and blasting. Explosives are employed throughout the mining industry for primary rock breakage. There are a number of controlled blasting techniques that can be implemented to improve highwall stability. These include line drilling, smooth wall blasting, trim blasting, …

Column Flotation Performance Prediction: Pca, Ann And Image Analysis-Based Approaches, Fardis Nakhaei, Mehdi Irannajad, Sima Mohammadnejad

Mining Engineering Faculty Research & Creative Works

The flotation froth surface appearance includes remarkable information, which can be employed as a helpful index for the qualitative evaluation of the process efficiency. Image analysis is a practical technology for the sake of achieving process related information that can be employed in expert controllers in order to amend flotation performance. In this paper, the intelligent modelling of relationship between froth characteristics and the metallurgical performance in a pilot column flotation of iron ore was established. Column flotation tests were carried out at a wide range of operating conditions and the froth features along with the metallurgical performances were specified …

Investigating Blast Fume Propagation, Concentration And Clearance In Underground Mines Using Computational Fluid Dynamics (Cfd), Raymond Ninnang Tiile

Doctoral Dissertations

"Blasting activities using standard industry explosives is an essential component of underground hard rock mining operations. Blasting operations result in the release of noxious gases, presenting both safety and productivity threats. Overestimation of post-blast re-entry time results in production losses, while underestimation leads to injuries and fatalities. Research shows that most underground mines simply standardize post-blast re-entry times based on experiences and observations. Few underground mines use theoretical methods for calculating post-blast re-entry time. These theoretical methods, however, are unable to account for the variations in the blasting conditions. Literature review shows that: (i) there is currently no means of …

Projectile Impact Effects On A 50 Psi Plug Type Coal Mine Seal, Bruce Albert Von Niederhäusern

Masters Theses

"The current lack of projectile damage criteria for mine seals is assessed to determine if criteria should be developed. Impact experiments were performed on a full-scale 50 psi mine seal to determine failure modes, dynamic stress state, and assess risk to existing operational mine seals. Test projectiles were selected from common underground coal mine items propelled by means of a black powder projectile generator. Projectile velocities attained in testing ranged from approximately 100 to 650 ft/s (30 to 200 m/s). Dynamic strain was measured on the non-impact face to derive the state of stress and estimate failure criteria. Penetration models …

Characterization Of Aerosols In An Underground Mine, Arash A. Habibi

Doctoral Dissertations

“Diesel-powered engines are a common source of submicron carbon-rich particles. Characterizing morphological and physical attributes of diesel agglomerates is therefore of great importance to be able to identify the source and improve removal technology. Size-segregated sampling was conducted in two phases of underground experiments. Scanning transmission electron microscopy and fast mobility particle sizers were used to determine the size distribution of agglomerates based on particle mobility and projected area diameter. Controlled zone sampling test results were used to determine the morphological characteristics of agglomerates for specific types of diesel equipment both with and without removal strategies. Changes in fractal dimension, …

Improving Base Metal Electrowinning, Charles Ebenezer Abbey

Doctoral Dissertations

"In zinc electrowinning, Mn oxidizes to form MnO₂ on Pb-Ag anodes, cell walls and pipes. MnO₂ reduces anode corrosion but also leads to short circuits and maintenance issues. MnO₂ is thought to interact with chloride ions and produce oxidized chlorine species. The interactions between Mn and Cl are not well understood. Bench scale experiments were conducted to investigate the effects of the manganese to chloride ratio on anode corrosion rate and electrolyte chemistry using rolled Pb-Ag anodes. Increasing the average Mn/Cl^- ratio from ~7:1 to ~11:1 reduced the anode corrosion rate. Anode scales produced with Mn/Cl …

Pressure Versus Impulse Graph For Blast-Induced Traumatic Brain Injury And Correlation To Observable Blast Injuries, Barbara Rutter

Doctoral Dissertations

"With the increased use of explosive devices in combat, blast induced traumatic brain injury (bTBI) has become one of the signature wounds in current conflicts. Animal studies have been conducted to understand the mechanisms in the brain and a pressure versus time graph has been produced. However, the role of impulse in bTBIs has not been thoroughly investigated for animals or human beings.

This research proposes a new method of presenting bTBI data by using a pressure versus impulse (P-I) graph. P-I graphs have been found useful in presenting lung lethality regions and building damage thresholds. To present the animal …

The Mechanics Of Precision Presplitting, Anthony Joseph Konya

Doctoral Dissertations

"Precision Presplitting is a widely used method of presplit blasting for the mining and construction industries. In recent years considerable effort has gone into the development of empirical equations based on field data to be able to better design the Precision Presplit for various rock types and structural environments. However, the most widely discussed theory about the mechanics of the presplit formation, that of shockwave collisions, does not appear to be applicable for this method of presplitting.

This research has disproven this theory based on insufficient magnitude of the shockwave from modeling with basic wave mechanics. Other authors have suggested …

The Behavior Of Suas Under Explosive Loading Conditions And Implications For Safe Operating Procedures, Ashok Em Sudhakar

Doctoral Dissertations

"Drones are increasingly being used for tasks previously unimagined and the beneficial uses are evolving. The United States Congress has envisioned the possible uses of drones for both combating and conveying explosive threats and other harmful and destructive activities. Congress' intent is reflected in new laws (2018) and policies (2019).

All civilian available Small Unmanned Aerial Systems sUASs (Drones), weighing less than 55 pounds, in the current market are not designed for operations in explosive environments. This first of a kind research focuses on further understanding of sUASs response to explosive loading and the public policy implications. This research measured …

Evaluation Of The 20 L Dust Explosibility Testing Chamber And Comparison To A Modified 38 L Vessel For Underground Coal, Robert Quentin Eades, Kyle A. Perry, Catherine E. Johnson, Jacob Miller

Mining Engineering Faculty Research & Creative Works

The phenomenon of combustible dust explosions is present within many industries. Tests for explosibility of dust clouds per ASTM E1226 use a 20 L explosive chamber that places the combustible dust directly below the dispersion nozzle which generates a thorough mixture for testing purposes. However, in the underground coal mining industry, there are a number of geologic, mining, and regulatory factors that change the deposition scheme of combustible coal dust. This causes the atmosphere of a coal mine to have a variable rock dust-coal dust mixture at the time of ignition. To investigate the impact of this variable atmosphere, a …

Rare Earth Elements Removal Techniques From Water/Wastewater: A Review, Omoniyi Pereao, Chris Bode-Aluko, Olanrewaju Fatoba, Katri Laatikainen, Leslie Petrik

Mining Engineering Faculty Research & Creative Works

The rare-earth elements (REEs) remain very important due to the growing increase in their demand and for their critical and indispensable use in many high-tech industries today. This growing demand for REEs has led to an increased environmental exposure and water pollution from numerous REEs commercial products and as a result, the recovery of REEs is a significant issue that requires appropriate consideration. There are diverse and various strategic techniques available to remove metal ions from aqueous solutions, but nanofiber adsorbent appears to be quite innovative due to their outstanding characteristics such as cost effectiveness, flexibility, high surface area, porosity, …

Explosive Dust Test Vessel Comparison Using Pulverized Pittsburgh Coal, Jacob Miller, Jay Schafler, Phillip R. Mulligan, Robert Eades, Kyle A. Perry, Catherine E. Johnson

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Explosions of coal dust are a major safety concern within the coal mining industry. The explosion and subsequent fires caused by coal dust can result in significant property damage, loss of life in underground coal mines and damage to coal processing facilities. The United States Bureau of Mines conducted research on coal dust explosions until 1996 when it was dissolved. In the following years, the American Society for Testing and Materials (ASTM) developed a test standard, ASTM E1226, to provide a standard test method characterizing the “explosibility” of particulate solids of combustible materials suspended in air. The research presented herein …

Additive Manufacturing Of Liners For Shaped Charges, Jason Ho, Cody Lough, Phillip R. Mulligan, Edward C. Kinzel, Catherine E. Johnson

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

A Shaped Charge (SC) is an explosive device used to focus a detonation in a desired direction, and has applications in oil extraction, weaponry and demolition. The focusing relies on a void in the explosive mass, shaped by a metal liner that becomes a super-heated projectile during detonation. Additive Manufacturing (AM) allows greater design freedom and geometric complexity for the liner portion of the SC. Specifically, hierarchical structuring and functional grading can potentially provide greater velocity, directionality, and efficiency. In this work, Selective Laser Melting (SLM) is used to explore different geometries for an SC liner made out of SS …

Nanometer Ultrastructural Brain Damage Following Low Intensity Primary Blast Wave Exposure, Hailong Song, Landry M. Konan, Jiankun Cui, Catherine E. Johnson, Graham K. Hubler, Ralph G. Depalma, Zezong Gu

Mining Engineering Faculty Research & Creative Works

Blast-induced mild traumatic brain injury (mTBI) is of particular concern among military personnel due to exposure to blast energy during military training and combat. The impact of primary low-intensity blast mediated pathophysiology upon later neurobehavioral disorders has been controversial. Developing a military preclinical blast model to simulate the pathophysiology of human blast injury is an important first step. This article provides an overview of primary blast effects and perspectives of our recent studies demonstrating ultrastructural changes in the brain and behavioral disorders resulting from open-field blast exposures up to 46.6 kPa using a murine model. The model is scalable and …

Process Mineralogy Of Iranian High Sulfur Iron Ore, Tonglin Zhao, Xiaoli Wang, Hongle Ai, Ahmed Sobhy

Mining Engineering Faculty Research & Creative Works

Processing of Iranian high sulfur iron ore is problematic in minerals industry. The iron ores were studied by the means of polarizing microscopy, chemical analysis, X-ray diffraction. The study shows that the iron ores have high grade of iron, and complex structures. XRD showed that the iron ore consists of metallic minerals such as magnetite with a small amount of hematite and limonite and non-metallic minerals as serpentine, chlorite, and talc. The average particle size of magnetite crystals is 0.182 mm. The ore contains 1.62% sulfur as harmful impurity in form of pyrite mineral. Due to the isomorphism of magnesium …

Holmium And Samarium Detectability In Post-Blast Residue, James Seman, Catherine E. Johnson, Carlos Henry Castano Giraldo

Mining Engineering Faculty Research & Creative Works

The creation of an identification taggant that survives detonation and can easily be recovered would prove invaluable in situations such as a terrorist attack where the explosives have been detonated and need to be traced by law enforcement. This paper shows that traces of two elements, samarium (Sm) and holmium (Ho), can be identified from explosive post-blast residue. This is the first step to creating a viable taggant system that survives detonation. The two elements were introduced to the explosive before detonation, and the post-blast residue was analyzed by neutron activation analysis (NAA). These data indicate the presence of these …