Heat Transfer, Combustion Commons^™

Hybridization From Guest-Host Interactions Reduces The Thermal Conductivity Of Metal-Organic Frameworks, Mallory E. Decoster, Hasan Babaei, Sangeun S. Jung, Zeinab M. Hassan, John T. Gaskins, Ashutosh Giri, Emma M. Tiernan, John A. Tomko, Helmut Baumgart, Pamela M. Norris, Alan J.H. Mcgaughey, Christopher E. Wilmer, Engelbert Redel, Gaurav Giri, Patrick E. Hopkins

Electrical & Computer Engineering Faculty Publications

We experimentally and theoretically investigate the thermal conductivity and mechanical properties of polycrystalline HKUST-1 metal–organic frameworks (MOFs) infiltrated with three guest molecules: tetracyanoquinodimethane (TCNQ), 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane (F4-TCNQ), and (cyclohexane-1,4-diylidene)dimalononitrile (H4-TCNQ). This allows for modification of the interaction strength between the guest and host, presenting an opportunity to study the fundamental atomic scale mechanisms of how guest molecules impact the thermal conductivity of large unit cell porous crystals. The thermal conductivities of the guest@MOF systems decrease significantly, by on average a factor of 4, for all infiltrated samples as compared to the uninfiltrated, pristine HKUST-1. This reduction in thermal conductivity goes in …

Development Of Phase Change Thermal Storage Medium: Cooking With More Power And Versatility, Martin Osei

Masters Theses

With an Insulated Solar Electric Cooker (ISEC), a 100 W solar panel directly cooks food while providing 5W off-grid electricity access; but it cooks slowly. Storing the day’s energy with phase change thermal storage allows ISEC to cook more rapidly as well as cook after sunset. The ISEC is made by sticking a 3ohm resistive to an aluminum pot (inner phase change assembly PCA) where another cooking pot fits. The resistive heater is surrounded by a bigger pot (outer PCA) that contains the PCM and is tightly sealed. The solar panel is connected to the resistive heater with a thermal …

Combustion Feature Characterization Using Computer Vision Diagnostics Within Rotating Detonation Combustors, Kristyn B. Johnson May

Graduate Theses, Dissertations, and Problem Reports (ETD)

In recent years, the possibilities of higher thermodynamic efficiency and power output have led to increasing interest in the field of pressure gain combustion (PGC). Currently, a majority of PGC research is concerned with rotating detonation engines (RDEs), devices which may theoretically achieve pressure gain across the combustor. Within the RDE, detonation waves propagate continuously around a cylindrical annulus, consuming fresh fuel mixtures supplied from the base of the RDE annulus. Through constant-volume heat addition, pressure gain combustion devices theoretically achieve lower entropy generation compared to Brayton cycle combustors. RDEs are being studied for future implementation in gas turbines, where …

Cfd And Heat Transfer Analysis Of Rocket Cooling Techniques On An Aerospike Nozzle, Geoffrey Sullivan

College of Graduate Studies: Theses & Dissertations

In recent years the development of rocket engines has been mainly focused on improving the engine cycle and creating new fuels. Rocket nozzle design has not been changed since the late 1960s. Recent needs for reliable and reusable rockets, as well as advancements in additive manufacturing, have brought new interest into the aerospike nozzle concept. This nozzle is a type of altitude adjusting nozzle that is up to 90% more efficient than bell nozzles at low altitudes and spends up to 30% less fuel. Since the nozzle body is submerged in the hot exhaust gasses it is difficult to keep …

Building Performance - Societal Drive, Programme And Symposium, Joseph Little, Patrick Daly

Articles

Society is increasingly looking at the construction industry to mitigate the environmental crisis and solve the housing crisis through wholesale embrace of three broad sets of challenges. The MSc in Building Performance (Energy Efficiency in Design) (MSc BP(EED)) was created in 2017 to provide significant upskilling in the knowledge, skills, and software applications of building design professionals so that they can meet these challenges, while creating compliant, sustainable, super-low energy, new and renovated buildings. The delivery of the programme supports upskilling of employed building design professionals at Masters level, encouraging a minority to develop their capacity and interest in research …

Development And Testing Of A Biochar Combustor For A Stirling Engine, Kyle Bryant Vickery

Graduate Theses, Dissertations, and Problem Reports (ETD)

Nonrenewable resources persist as a necessity for perpetuating the current technology and standards of living maintained throughout the world. Biochar is an alternative and renewable fuel source that constitutes the potential to provide energy comparable to coal. Designing and fabricating components that can efficiently harness biochar’s energy to power machinery would demonstrate a successful renewable energy source. The scope of this research is to explain the feasible design, fabrication, and results of technology involving the burning of biochar and transference of hot combustion products for the purpose of powering a Stirling Engine. This design consists of a solid fuel burner, …

Development Of A Thermal Desalination System Using Low Quality Thermal Energy, Takudzwa C. Chipunza

Graduate Theses, Dissertations, and Problem Reports (ETD)

Abstract

Development of a Thermal Desalination System Using Low Quality Thermal Energy

Takudzwa Chipunza

The blowdown water from the cooling tower of the power plant and the produced water from shale gas industry cannot be disposed directly to the environment as they may contain dissolved solids that are harmful to the environment. A detailed physical and chemical process to remove the mineral and organic solids has been developed in West Virginia University. Such a process includes running the blowdown and produced water through a softening tank, activated carbon tank, and a reverse osmosis (RO) system. The RO reject contains a …

Computational Analysis Of The Stability Limits Of Premixed Methane-Air Combustion In Micro-Channels, Almoutazbellah Adnan Kutkut

Graduate Theses, Dissertations, and Problem Reports (ETD)

Technological progress in the last decades facilitated the development of integrated microsystem devices, including electrical and mechanical components for micro-electro-mechanical systems (MEMS). Such systems necessitate an external power supply, but typical batteries yet have some unavoidable limitations. To address this problem, numerous studies have been conducted to develop alternatives powered by micro combustion – in order to effectively utilize the high-density energy of hydrocarbon fuels. Such a global need has resulted in much more attention devoted to the combustion-based micro-power generation systems. However, to better understand the typical combustion characteristics in such microscale systems, design and performance restrictions need to …

Development Of Advanced Models For Pre-Ignition Prediction In Gas Engines And Analytical Model For Wallfilm Evaporation, Ankith Ullal

Dissertations, Master's Theses and Master's Reports

Ever-changing regulations aimed at improving efficiency and reducing harmful emissions have resulted in many power-generation device (engine) manufacturers to adopt new strategies. Computer simulation of these new strategies of power generation requires more accurate and higher fidelity modelling tools. In the present study, two such models are developed. The first model deals with pre-ignition phenomena driven by lubricant (lube) oil in natural gas engines and the second model is relevant to prediction of wallfilm evaporation by employing analytical solutions to transport governing equations for boundary layers.

Pre-ignition in engines has been the subject of current research with the advent of …

Partially Stratified Combustion Of Natural Gas For Spark Ignition Engines, Philip S. Zoldak

Dissertations, Master's Theses and Master's Reports

In this work, the advantages of partially stratified direct injection natural gas versus premixed port-fueled injection natural gas spark ignited engines has been studied. The volumetric efficiency, ratio of specific heats and turbulent kinetic energy was found to be higher with direct injection versus port-fueled injection thus improving thermal efficiency. A background study of optical chamber experimental data was performed to develop an understanding on the effect of pressure ratio on direct injection of methane under both fully-expanded (sub-sonic) and under-expanded (super-sonic) conditions. Under-expanded jets had a noticeable advantage in terms of turbulent kinetic energy, which led to enhanced air …

Calorimetric Measurements Of Lunar Regolith Simulant And Water. An Experimental Study Correlating Weight Percent Water And Temperature Change Through Periods Of Phase Change., George B. Johnson

Dissertations, Master's Theses and Master's Reports

Permanently Shaded Regions (PSRs) are cold traps located around the lunar south pole that have been confirmed to contain possible interesting quantities or volatiles such as H2O, CO2, SO2, CH4, and others. [1] The identification of these volatiles on the lunar surface was a critical step in the development of NASA’s strategic goals for scientific discoveries, sustained space travel and exploration, and re-establishing a human presence on the moon. These volatiles are vital to the future of operating in and exploring space. The LCROSS impact revealed the existence of these resources in PSRs but more information is needed about the …