Energy Systems Commons^™

Residential Thermal Storage And Cooling, Joao Marcelo Rocha Belmonte, Jacob Anderson, Andrew Clarke, Daphne Forester, Bianca Hardtke, Josh Hartman, Marc D. Compere

Sustainability Conference

No abstract provided.

Solar Powered Parking Lot Lights, Jordyn Taylor

Sustainability Conference

Solar energy is a renewable resource growing exponentially around the country over the past few decades. Solar energy works through the use of photo-voltaic cells, which work to convert energy from sunlight into electricity. This is done within solar panels, which are then connected to batteries for energy storage to use as needed. As production has increased over past decades, the cost for solar panel hardware and installment has thus fallen to meet consumer need. While most common implementations include solar panels attached to one’s home or solar panel ‘fields’ for charging entire towns, there has been a steady rise …

Solar District Cup Competition, Qi Jiang, Kristen A. Holman, Benjamin F. Aulenbab, Adi Alharbi, Chenge Liu

Sustainability Conference

The Solar District Cup is a two-semester design competition sponsored by the U.S. Dept. of Energy in which teams from across the nation compete to design the most efficient and cost effective solar plus storage system for a unique district case. The Embry Riddle team was tasked with designing such a system for New Mexico State University in Las Cruses, NM.

Speed Bump Power Generator, Sultan Alanazi, Osamah Abulgaith

All Undergraduate Projects

A large amount of energy is wasted by the vehicles on the speed breakers through friction. Energy can be produced by using the vehicle weight and speed. The team proposes a smart speed breaker that generates power (Speed bump power generator). The device allows vehicles to pass from both sides. The system makes use of mechanical assembly with metal sheets with linkages that press down with spring arrangement. Using the motion and weight of vehicles was the method that the team relied on to design the device. The mass of the vehicles allows the top plate to move the rack …

Dual-Axis Solar Tracker, Bryan Kennedy

All Undergraduate Projects

Renewable energies, and fuels that are not fossil fuel-based, are one of the prolific topics of debate in modern society. With climate change now becoming a primary focus for scientists and innovators of today, one of the areas for the largest amount of potential and growth is that of the capturing and utilization of Solar Energy. This method involves using a mechanical system to track the progression of the sun as it traverses the sky throughout the day. A dual-axis solar tracker such as the one designed and built for this project, can follow the sun both azimuthally and in …

Footsteps Power Generator, Faisal Alonazi, Mohammed Aljohani

All Undergraduate Projects

This project was motivated by the need for a device that would generate electricity from human motion, especially footsteps. Electricity is a very important resource in our daily life. There are numerous sources from which generate electrical energy. The major sources of energy include but are not limited to coal, natural gas, petroleum, and nuclear energy. Most of these sources have adverse effects on the environmental inclusion such as air pollution; for example, from coal energy generation plants which then cumulatively leads to effects such as increase in rates of global warming. This project seeks to establish an environmentally friendly …

R/C Mini Baja Car: Drive Train And Steering, Carlton R. Mcdonald

All Undergraduate Projects

The purpose of the Baja R/C Car is to compete in the ASME eFX competition in a series of events to prove the functionality of the vehicle. This series of events includes the Slalom, Drag, and Baja race, The Slalom is a test in the steering capability of the vehicle, the Drag is a test in the acceleration of the vehicle in a straight line, and the Baja puts all factors together in a race to test every component of the vehicle. This project is about building an R/C car that not only functions, but also has maximum performance capabilities …

A Reduced Model For Microbial Fuel Cell, Dina Aboelela, Moustafa A. Soliman, Ibrahim Ashour

Chemical Engineering

Microbial fuel cells (MFCs) are a group of microbial electrochemical cells (bioreactors) that are used to generate energy from organic waste found in wastewater. MFCs represent a promising method of waste disposal and production of electricity. Scaling up the use of MFCs requires extensive analysis and detailed grasp of the required processes. The current work aimed to study a model of an MFC, and find the optimum parameters needed for maximum energy production. The process was simulated and validated on continuous-flow MFCs with a Columbic efficiency of 162% and 35% COD removal. Sensitivity analysis of the model was performed. The …

Design Of An Annular Disc-Shaped Heat Pipe For Air-Cooled Steam Condensers, Ahmad Saleh

Electronic Theses and Dissertations, 2020-2023

Limitations on water utilization are turning into an expanding issue for the power and electricity generation industry. As a contribution to the solution of water consumption problems, utility companies are shifting toward using air-cooled condensers (ACC) in replace to the typical water-cooling methods of once-through cooling and the surface condenser/wet-cooling tower combination. Although the ACC is a dry cooling method, the industry is quite hesitant to switch over to ACC mainly for three reasons: (a) lower power output, (b) higher capital cost, and (c) larger physical footprint. All these drawbacks are because of the high overall thermal resistance of condensing …

Engineering The Surface Chemistry And Surface Conditions To Optimize The Heat Removal Rate Of Various Surfaces, Thomas Germain

Electronic Theses and Dissertations, 2020-2023

As the demand for more powerful and smaller electronics rise, the need for creative cooling solutions to prevent burnout becomes increasingly paramount. In response to recent cooling needs, new cooling techniques, such as jet impingement cooling, spray cooling, and heat pipes, have risen in popularity for their simple design and efficiency in thermal transport. This interest has risen in both industry and academia, where research has been conducted to optimize the heat transfer performance for these systems and how these systems can be implemented in new technologies. One method that has risen in interest is affecting the surface, through physical …

Generation Of Premix Laminar Flame Speed Library, Sai Prashanth Kumar

Dissertations, Master's Theses and Master's Reports

The Laminar flame speed is an essential parameter in measuring turbulent premixed combustion applied in Spark ignition engines. Instead of using power-law correlations, which is valid only for particular ranges, the procedure for generating a premixed laminar flame speed library is defined using MTU – Master mechanism for a wide range of charge mixture conditions inside an engine combustion chamber: Temperature (300 – 700 K), Pressure (1 – 70 bar) and reactant mixture composition of equivalence ratio (0.4 – 2.0) Laminar flame speed library is generated for methane. The mechanism's performance was improved by adjusting the pre-exponential factor of the …

Development Of An Eco Approach And Departure Application To Improve Energy Consumption Of A Plug-In Hybrid Vehicle In Charge Depleting Mode, Brandon Narodzonek

Dissertations, Master's Theses and Master's Reports

A recent study at Michigan Technological University as part of the NEXTCAR DOE APRA-E Project was conducted to determine the potential energy savings of a plug-in hybrid electric vehicle (PHEV) equipped with various Connected and Automated Vehicle (CAV) Technologies. One aspect of this study focused on the development of an Eco Approach and Departure (Eco AnD) Application that would further reduce the energy consumed around a signalized intersection.

Many modern intersections are equipped with traffic signals that can broadcast Basic Safety (BSM), MAP, and Signal Phase and Timing (SPaT) message sets that contain intersection ID, location, current phase, and cyclic …

Energy Efficiency And Alternative Energy Generation In Existing Buildings On A College Campus, Sameer Keshavan

Electronic Theses and Dissertations

Universities and colleges are looking for ways to be sustainable and save energy costs on their campuses. In terms of raw dollars, “America’s colleges and universities spend almost $7 billion a year in energy and utilities”. Campus buildings consume more than 80% of the energy utilized by the universities and it is often used in the form of electricity for lighting, ventilation, air-conditioning, and natural gas for heating. By reducing energy use, it will translate into cost savings that could be utilized towards student programs, facility improvements, and other university initiatives. This can be achieved by energy conservation efforts and …

Test 2217: Kubota M8-181, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2218: Kubota M8-201, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2219: John Deere 7r 290, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2225: John Deere 8rt 370, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2226: John Deere 8rt 410, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary 1197: John Deere 6195m Ft4, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary 1195: John Deere 6155m Ft4, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary 1196: John Deere 6175m Ft4, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary 1192: John Deere 6120m Ft4, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary 1191: John Deere 6110m Ft4, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2227: John Deere 8rx 370, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Applied Laser Absorption Spectroscopy For Sensing In Detonative Flows, Kyle Thurmond

Electronic Theses and Dissertations, 2020-2023

A great deal of interest lies in detonative combustion due to its destructive potential and the theoretical thermodynamic advantages over traditional deflagration devices used for propulsion and energy. High energy materials and explosives combustion products and temperature must be characterized to gain greater insight into the energy release mechanisms, allowing for more tailored deployment. Predictive models for detonations employ various types of state equations, and temperature can be used as a check on the equation validity. However, the extreme environment of explosives is incredibly challenging to evaluate temperature. Additionally, these reactions are extremely fast, taking place over microseconds, and have …

Coarse-Grained Dynamically Accurate Simulations Of Ionic Liquids At Vacuum-Interface, Tyler D. Stoffel

Theses and Dissertations--Mechanical and Aerospace Engineering

Ionic liquids, possessing improved properties in many areas of technical application, are excellent candidates as components in development of next-generation technology, including ultra-high energy batteries. If they are thus applied, however, extensive interfacial analysis of any selected ionic configuration will likely be required. Molecular dynamics (MD) provides an advantageous route by which this may be accomplished, but can fall short in observing some phenomena only present at larger time/length scales than it can simulate. Often times this is approached by coarse-graining (CG), with which scope of simulation can be significantly increased. However, coarse-grained MD systems are generally known to produce …

Test 2220: John Deere 7r 310, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2221: John Deere 7r 330, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2222: John Deere 8r 340, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2223: John Deere 8r 370, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …