Energy Systems Commons^™

Factors Influencing Total Productive Maintenance Implementation For Thermal Generation Plants, Ismail W. R. Taifa Dr

Tanzania Journal of Engineering and Technology (TJET)

This study accepts that the technical and administrative factors can amplify effective total productive maintenance (TPM) implementation at thermal generation plants. It is noted that there is a limited number of studies that have attempted to understand the subject of TPM implementation in the energy sector. Noting this shortcoming, the authors thought it crucial to generate empirical evidence on the factors influencing effective TPM implementation for thermal generation plants, with evidence from gas-fired plants. A sample of 88 respondents was selected and consulted. Data were collected through questionnaires and analyzed quantitatively by inferential statistics and qualitatively through thematic analysis using …

Sensible Heat Bean Cooker, Casiana Lwiwa

Tanzania Journal of Engineering and Technology (TJET)

Alternative cooking energy to replace wood fuels is needed in the African context. Liquified Natural Gas (LNG) is a solution but is still based on burning fossil fuel. Electrical cookers can be an alternative as well. However, for off-grid systems this means electrical batteries are required, as the solar electricity from Photovoltaic (PV) panels is intermittent, and as cooking is also to be made after sunset. Heat storage technologies can provide solutions where available energy is stored in the form of heat for cooking when needed. The challenge is then to develop systems which are robust, safe, and technically simple. …

Development Of Solar Pv Systems For Mini-Grid Applications In Tanzania, Seleman Mayanjo

Tanzania Journal of Engineering and Technology (TJET)

Access to electricity offers great benefits to development through the provision of reliable and efficient energy sources in the country. Majority of the population living in the remote and rural areas of developing countries mostly sub-Saharan Africa are not supplied with electricity. Although the governments through their electricity companies put their effort to extends the grid distribution networks to remote and rural areas still the coverage were not sufficiently enough due to growing demands for safe and reliable electricity. However, solar as a source of energy remains the least utilized energy source in many countries including Tanzania. Solar Photovoltaic (PV) …

Optimal Energy Management For Off-Grid Hybrid Renewable Energy Systems, Owdean M. Suwi

Tanzania Journal of Engineering and Technology (TJET)

A photovoltaic (PV)/wind/battery/Generator-Set hybrid power system's energy dispatch is discussed in this research, along with the ideal solution. The optimization model enables the hybrid power system's generating devices to share power appropriately. The main goals are to minimize fuel consumption and costs and maximize the usage of Renewable Energy Sources (RES). The proposed simulation plan succeeds in lowering fuel costs because the diesel generator only kicks on at night and in the early morning when the energy from RES is insufficient to supply the load. The load is supplied with power, and the battery is charged throughout the day, when …

Solid-State Electrolytes For Long Duration Molten Sodium Batteries, Ryan C. Hill

Theses and Dissertations--Chemical and Materials Engineering

Rechargeable batteries have become a staple of modern society, driving the development and expansion of portable electronics and electric vehicles. The long lifetime and high energy density provided by batteries have made them excellent candidates for use in the emerging field of long duration, grid-scale energy storage. However, traditional battery chemistries, such as Li-ion, are not an ideal solution for grid-scale storage, due to high-cost raw materials that are often sourced from volatile markets. Sodium-based batteries are a promising alternative for long duration storage, owing to the domestic abundance of raw materials and energy densities that nearly rival that of …

Technical And Economic Feasibility Of A Microgrid For A Fire Station In Humboldt County, California., Nishaant Kumar Sinha

Cal Poly Humboldt theses and projects

Microgrids are emerging as a promising solution to unreliable grid energy. Today, California is not only witnessing grid resiliency challenges from natural disasters such as wildfires, earthquakes, floods and heatwaves, but it is also seeking to green the grid and bring more renewables online. For example, Humboldt County, where this project is focused, has recently experienced an earthquake of 6.4M (on December 22nd, 2022), which shut down the regional grid for ~20 hours.

Microgrid adoption enables critical facilities to operate seamlessly. The Humboldt Bay Fire Station (HBFS) No.1 is one such example, where first responders work to protect citizens against …

System Analysis Of An Internal Combustion Engine (Ice) – Solid Oxide Fuel Cell (Sofc) Hybrid Cycle, Jose Javier Colon Rodriguez

Graduate Theses, Dissertations, and Problem Reports (ETD)

Due to the intermittent nature of renewable energy and the rigid operation of existing coal plants, the need for flexible power generation technology is eminent. Hybrid energy systems have shown potential for flexible, grid following dynamics while maintaining higher efficiencies. The work below focuses on the performance analysis of a proposed 100 kW pressurized Internal Combustion Engine (ICE) and Solid Oxide Fuel Cell (SOFC) hybrid system. The un-utilized fuel from the SOFC stack provided the chemical energy to operate the engine. A turbocharger was used to deliver the necessary air flow for both the stack and engine. An external reformer …

Energy Assessment Of E-Motorcycles As A Clean Transport Mode For Passenger Mobility: A Case Of Ilala District, Dar Es Salaam, John Shirima

Tanzania Journal of Engineering and Technology (TJET)

Electric motorcycles or e-motorcycles is a clean mode of road transport that present a prominent solution toward decarbonizing cities. Despite of e-motorcycles being cleaner than gasoline ones, at the moment, there is missing information whether it is feasible to replace gasoline motorcycles with e-motorcycles used for business transport purposes. This paper, therefore, presents the results comparing energy usage when using e-motorcycles and when using the gasoline motorcycles. The energy demand for driving passengers using an e-motorcycle in the precarious routes originated from Gongo la Mboto bus stop to Segerea bus stop, Buguruni Malapa, Gerezani bus stop, Kivukoni bus stop, and …

Lead Acid Battery Recycling In The Current Tanzania Industrialization Drive: Challenges And Opportunities, Divina D. Kaombe

Tanzania Journal of Engineering and Technology (TJET)

ABSTRACT Advancements in automotive technologies, Information and Communications Technology and renewable energy technologies have increased the use of lead acid batteries as a source of portable and rechargeable energy. This has considerably increased the number of spent batteries with adverse effects on the environment and human health; which calls for recycling of spent batteries. This work was conducted to investigate challenges facing the formal business of recycling spent batteries and potential manufacturers of new lead-acid batteries in Tanzania. The work involved collection of information from key stakeholders such as collectors, dealers, Tanzania Revenue Authority and recyclers. It was found out …

Renewable Energy Microgrids To Improve Electrification Rate In Democratic Republic Of Congo: Case Of Hydro, Municipal Waste And Solar, Ngondo Otshwe Josue, Aviti Thadei Mushi

Tanzania Journal of Engineering and Technology (TJET)

Worldwide, it is imperative for citizens to have access to electricity. This applies to Congolese--rural and urban dwellers, and if possible, it should be guaranteed by government’s laws and policies. Howev er, the rural and urban areas of Democratic Republic of Congo (DRC) suffer majorly from lack of access to electricity. The major reasons are the high costs associated with connection to the national central grid and production insufficiency. Therefore, one feasible approach to electrify these areas is to use microgrids. This technolo gy is decent and viable option for energy revolution since it incorpo rates energy storage systems, distributed …

Assessment Of Energy Efficiency In Beverage Industry, Mahamudu H. Mtebwa

Tanzania Journal of Engineering and Technology (TJET)

The brewery industry has a significant contribution to the national income. However, it is also associated with energy intensive processes and pollution. In this work, the energy efficiency assessment of the largest brewery in Tanzania i.e., Tanzania Breweries Limited has been conducted. Energy consumption analysis was conducted according to IEEE SA 739 1995. Important parameters used to assess brewery energy efficiency were boiler efficiency and losses, equipment energy productivity as well as load factor. It was found that the main energy consumers are packaging (54.63%), brewing (29.30%) and utilities (15.17%). More importantly, it was found that about 68% of the …

An Experimental Approach Towards Pv-Based Solar System Sizing For An Engineering Laboratory, Muyideen O. Lawal

Tanzania Journal of Engineering and Technology (TJET)

This study aims at providing an experimental sizing procedure for a rooftop PV-based solar power system for an engineering laboratory. This was achieved by monitoring the peak power and energy delivered by an installed 20W solar panel into an 18 Ah battery. Knowledge of the average daily peak power and energy was used to determine the percentage rated capacity available for use and the sun hour. A load consumption comparison was also carried out with and without the connection of a load to inverter. In addition to this, the monitoring of the no-load consumption of the inverter was carried out. …

Viability Analysis Of Ubungo Ii Gas Power Plant Efficiency Improvement Using Co-Generation System, Aviti Thadei Mushi

Tanzania Journal of Engineering and Technology (TJET)

The power utility, Tanzania Electric Supply Company Limited (TANESCO) is faced with challenges of supplying adequate power to the ever-increasing demand. To this end, this paper explores the installed Ubungo Gas Power Plant (UGP II) located in Dar es Salaam to find means of utilizing it in co-generation method. The study embarked on detailed modelling of the system and run simulations which indicated that the co-generation can result to power generation efficiency increase between 10.42 to 50.92%. It is recommended to change the UGP II to exploit this co-generation method. Further, the study could be improved by including more parameters …

Sunsation’S Solar Powered Picnic Table, Michelle M. Barnett, Christopher Barber, Casey Durham, David Mason

Mechanical Engineering

Team SunSation is an interdisciplinary senior design project group that was tasked with developing a semi-permanent seating area for Cal Poly's electrical engineering courtyard. The EE courtyard is populated with plastic folding tables and chairs that are slowly falling apart. Dale Dolan, the head of the EE department, requested that a table design be developed that incorporates the use of solar panels. The addition of the solar panels to the table would help promote clean renewable energy as well as provide shade to those sitting in the courtyard.

The solution that SunSation arrived at is broken up into mechanical/structural, electrical, …

Baker/Koob Final Report: Solar Solution For Mini Mars Rover, Jonathan Cederquist, Cole Korchek, Derick Louie, Michaella Ochotorena, Collin Petersen

Mechanical Engineering

This project focused on designing, building, and testing a functional prototype of a collapsible solar array on the mini Mars rover being developed by client and sponsor, Mr. Rich Murray. Although many previous collapsible solar arrays have been deployed for space missions, the previous solar-powered Mars rovers only deployed their arrays once upon landing. This solar array will be able to collapse and deploy multiple times to allow for greater rover mobility and stability when the rover is not charging. This system is critical to the success of the rover project because it provides power without which the rover cannot …

Dc Microgrid Fault Detection Using Multiresolution Analysis Of Traveling Waves, Rudy Montoya

Mechanical Engineering ETDs

Fast detection and isolation of faults in a DC microgrid is of particular importance. Fast tripping protection (i) increases the lifetime of power electronics (PE) switches by avoiding high fault current magnitudes and (ii) enhances the controllability of PE converters. This thesis proposes a traveling wave (TW) based scheme for fast tripping protection of DC microgrids. The proposed scheme utilizes a discrete wavelet transform (DWT) to calculate the high-frequency components of DC fault currents. Multiresolution analysis (MRA) using DWT is utilized to detect TW components for different frequency ranges. The Parseval energy calculated from the MRA coefficients are then used …

Zero-Power Ac Current Sensor, Omar Aragonez

Mechanical Engineering ETDs

In this study, a magnetic piezoelectric cantilever powered AC current and frequency sensor is proposed. This paper covers the configuration of the experimental setup, finite element modeling of the magnetic coupling, and the optimal spatial location of the magnetic proof mass in relation to the wire for smart grid applications. Solid and stranded copper wires of various gauges were used and carried current up to 30A. The magnets act as a proof mass to lower the frequency while also coupling to the magnetic field generated by the current carrying wire. The frequency of the AC current produces a sinusoidal force …

Economic Analysis Of Islanded Microgrid: A Case Study Of Kisiju Village - Coastal Region, Jackson Justo

Tanzania Journal of Engineering and Technology (TJET)

The concept of Microgrid (MG) has gained significant attention of researchers and projects on the business side of electrical power generation and utilization, particularly in electrification of islanded areas such as villages. Most of these microgrids are powered by renewable energy resources (RERs) and they distribute power in low voltage distribution networks. Hence, these systems are faced with reliability problems due to the intermittency nature of RERs which affect the technical as well as the return on Investment of specific projects. In the latter context, reliability and economic analysis of the MG systems is an inevitable choice. This paper presents …

Empirical Comparison Of Machine Learning Methods For Wind Power Predictions, Sidny M. Stewart

EWU Masters Thesis Collection

No abstract provided.

Wireless Power Transfer In Autonomous Mobile Microgrids, Carl Greene

Dissertations, Master's Theses and Master's Reports

The ability to autonomously dock unmanned ground vehicles plays a key role in mobile micro-grids, where efficient power transfer is paramount. The approach utilized in this work allows for near-field wireless power transfer in remote locations with minimal support. Establishing a micro-grid power system connection autonomously using wireless power eliminates the arduous task of designing a complex, multiple degrees of freedom (MDOF) robotic arm. The work presented in this thesis focuses on both the hardware and software within the micro-grid system. This particular near-field wireless system consists of a primary and secondary set of modules, comprised of Litz wire coils, …

The Capabilities And Limitations Of Flywheel-Based Energy Storage System Pertaining To Subways In The Event Of A Power Outage, Jaskaran Singh

Dissertations and Theses

In the city that never sleeps, power outages or blackouts can be a shock, especially if you are on a train amid one. For example, during the infamous 2003 blackout, thousands of people were left stuck and stranded in parts of Northeastern United States. In particular, with no trains or buses in service throughout the 5 boroughs of NYC, those stranded essentially had no way to go back home. Hotels, terminals, and airports alike became places of camping as the city seemed to come to a halt. For the sake of public safety and transit efficiency, this study explores a …

Torque Vectoring To Maximize Straight-Line Efficiency In An All-Electric Vehicle With Independent Rear Motor Control, William Blake Brown

Theses and Dissertations

BEVs are a critical pathway towards achieving energy independence and meeting greenhouse and pollutant gas reduction goals in the current and future transportation sector [1]. Automotive manufacturers are increasingly investing in the refinement of electric vehicles as they are becoming an increasingly popular response to the global need for reduced transportation emissions. Therefore, there is a desire to extract the most fuel economy from a vehicle as possible. Some areas that manufacturers spend much effort on include minimizing the vehicle’s mass, body drag coefficient, and drag within the powertrain. When these values are defined or unchangeable, interest is driven to …

Nonmetallic Jet Impingement Thermal Management For Power Electronics Via Additive Manufacturing, Reece Whitt

Graduate Theses and Dissertations

The increase in energy demanded by transportation and energy sectors has necessitated highly efficient thermal management for reliable power electronics operations. Conventional cooling techniques are limited by their inability to target switching location hot spot temperatures, leading to non-uniform thermal gradients. These devices, such as cold plates and heat sinks, also utilize heavy metallic structures that can accentuate electromagnetic interferences generated by high voltage switching processes. This work proposes a non-metallic jet impingement cooler for more customized thermal management, while simultaneously reducing the harmful effects of electromagnetic interferences. Additive manufacturing is utilized to enable jet impingement zones to target individual …

Performance Loss Rate And Temperature Modeling In Predictive Energy Yield Programs For Utility-Scale Solar Power Plants, Katelynn M. Dinius

Master's Theses

The Gold Tree Solar Farm, designed by REC Solar, has a rated output power of 4.5 MW and began operation in 2018 to provide electricity to Cal Poly’s campus. Gold Tree Solar Farm site terrain consists of rolling hills and uneven slopes. The uneven typography results in interrow shading, requiring a modified tracking control algorithm to maximize power production. Predicting a utility solar field’s lifetime energy yield is a critical step in assessing project feasibility and calculating project revenue. The MATLAB-based predictive power model developed for this field overpredicted power in the middle of the day. The purpose of this …

Assessment Of The Impacts Of Climate Variability On Hydropower Generation: A Case Study Of The New Pangani Falls, Tanzania, Dativa Byarufu

Tanzania Journal of Engineering and Technology (TJET)

Climate change poses potential impacts on hydropower generation either positively by increasing or negatively by decreasing river flow. This study assessed the impacts of climate variability on hydropower with a focus on the New Pangani Falls in Tanzania. Rainfall and temperature time series data from 1980-2014 were analyzed in relation to river discharge and associated impacts to hydropower generation. The Man-Kendall test was used to detect trend in both annual and seasonal time series. The results showed a negative trend in annual rainfall with Z= -2.41 at α = 0.05 and the slope Q = -0.964. Seasonal trend analysis showed …

An Improved Earned Value Management Method Integrating Quality And Safety, Brian Briggs

LSU Doctoral Dissertations

The construction industry invests significant time and money to improve quality and safety while reducing cost and schedule impacts. The industry has a sincere desire to improve construction project management methods to improve efficiency. Historically, quality and safety underperformances result from undermanaged quality control and safety activities. The cost and schedule impacts associated with poor quality work have always had an impact on construction operations. The unprecedented challenges and uncertainties of COVID-19 highlighted the need to improve the Earned Value Management (EVM) method within construction to reflect these quality and safety activities. The central goal of this dissertation is to …

Performance And Economics Of Solar Inverters And Module Level Power Electronics In A 1 Mw Photovoltaic System, Maxwell Criswell

Biological and Agricultural Engineering Undergraduate Honors Theses

Photovoltaic solar panels convert sunlight to electricity in the form of direct current; therefore, a necessary component of every photovoltaic system is an inverter to convert the electricity to usable alternating current. There are various commercially available inverter technologies manufactured today such as microinverters, string inverters, and central inverters, as well as module level power electronic devices such as DC optimizers that are capable of improving system performance in string and central inverter systems. This thesis compares the performance and economics of five different inverter and module level power electronic systems through model simulation using Helioscope software. The five alternatives …

Design Of Smart Trashcan, Haoran Song

Senior Theses

A smart trashcan has been designed which can bring convenience to people for throwing their garbage away during the COVID-19 pandemic. A prototype is made from cardboard to demonstrate its function. This trashcan can sense people who are coming and leaving, and it can open and close automatically. The trashcan is powered by solar energy. A solar panel is mounted on top of the trashcan supporter. This design is specifically for use in China.

Measurements Of Wind Turbine Wake Evolution And Trajectory During Morning Boundary Layer Transition And Under Wake Steering Conditions Via Unmanned Aerial Vehicles, Stewart Nelson

Theses and Dissertations--Mechanical and Aerospace Engineering

In July of 2019, a flight campaign was conducted using semi-autonomous Unmanned Aerial Vehicles (UAVs) at the Port Alma Kruger Energy wind farm in Ontario, Canada, to study various aspects of wind turbine wake evolution. Horizontal transects across the wakes were measured using modified fixed-wing aircraft fitted with a five-hole probe to measure the wind velocity vector. Reference boundary layer conditions were measured by an octocopter with an assortment of mounted sensors flying vertical profiles upstream of the turbines. Three experiments were conducted during the campaign, which consisted of a study on wake behavior during the morning boundary layer transition, …

Physics-Based Modeling Of Lithium-Ion Batteries For Control And Estimation Applications, Brody J. C. Riemann

Masters Theses

“Lithium-ion batteries are extensively used in many application areas like consumer electronics, electric vehicles, and microgrids. As the world moves towards further electrification of vehicles and more widespread use of renewable energy sources, the need for large-scale battery storage systems will grow. To effectively replace conventional methods, batteries will need to be charged quickly while accounting for degradation to maximize lifetime. Further, larger batteries require more detailed safety monitoring, which is implemented using a battery management system (BMS). A BMS is responsible for state of charge (SOC) estimation, state of health (SOH) estimation, cell balancing, regulating voltage and current according …