Computer-Aided Engineering and Design Commons^™

Piston Crown Design, Kurt L. Lippmann, Liam T. Janssen, Alex Rangel, Larry J. Davis

Mechanical Engineering

This project investigates the effects of dimpling a piston crown, and its impact on engine combustion dynamics. Through computational methods, the effects of piston crown dimpling on flow characteristics were evaluated. Theoretical results were verified with experimental methods. Experimental methods included characterization of exhaust gas content, engine horsepower and torque, and exhaust opacity.

Hypoxic Incubator: Improving Robustness/Reliability And Demonstrating Physiological Efficacy, Damon Dennis Tan

Master's Theses

The Microphysiological Systems Laboratory aims to develop colorectal cancer tumor models under a hypoxic environment to assess model response to pharmaceutical compounds in vitro. To perform relevant studies, researchers have attempted to use different hypoxic inducing strategies such as a nitrogen pod and hypoxic incubator to recreate in vivo physiological responses to hypoxia. However, studies would be interrupted due to incubator functionality failure. To ensure successful and physiologically relevant studies, I improved and verified the robustness and reliability of a hypoxic incubator previously designed and manufactured in the lab. Through the testing and iterating design processes, I engineered and implemented …

Biomechanical Effects Of Worn-Out Shoe Outsoles And Insoles On The Human Foot, Yuka M. Iwashita, James A. Engebretson, Shreeshan Jena

College of Engineering Summer Undergraduate Research Program

The combination of outsole, midsole and insole layers of new shoes provide proper cushioning to the foot during the daily activities of life. Subsequently, the wear-based degeneration or damage to one or more of these sole layers can reduce the cushioning effect to the plantar surface of the foot. This reduction of cushioning effect can impact the distribution of stress concentration regions along the foot plantar surfaces and lead to foot pathologies. The present proposed research intends to study these effects of shoe-wear on the plantar surface of the human foot, using FEA (ABAQUS) and experimental methods. Commonly, the worn-out …

Robot Rodeo, Daniel Rickers, Tyler Vaughn, Vinayak Sharath, Berent Baysal, Promit Das Gupta

Mechanical Engineering

This document outlines the Final Design Review (FDR) for an autonomous robot developed in response to the Naval Surface Warfare Center (NSWC) Ship Maintenance Robot Rodeo Challenge. Through extensive analysis, we selected a design concept, built a verification prototype, and tested the prototype in the NSWC Robot Rodeo Competition. The design overview portion of this report will present the details of our design while explaining how it will function. Next, is our implementation section, which provides evidence about our procurement, manufacturing, and assembly of our product. Our design verification follows and explains the tests that we conducted on the robot …

Scitechatorium Exhibit, Adam Khan, Cole Busch, Logan Femling, Alan Onuma

Mechanical Engineering

This document outlines the final stages of development and analysis of our interactive children’s exhibit for the Bellevue-Santa Fe Charter School’s SciTechatorium. We will showcase the final form of our ball and track display, giving a detailed look at each component and subsystem.

To describe how our final prototype will be built we have included a detailed manufacturing summary for our design. Our models have been designed with manufacturability in mind, and we have outlined which processes were used to produce all our parts.

There are also detailed descriptions of testing that were conducted to verify the performance of the …

Supermileage Competition: Vehicle Chassis, Enrico Miguel Sangalang, Walter Oppelt, Adam Ponce, Vincent Corella

Mechanical Engineering

The Supermileage Urban Concept Vehicle Chassis Project was proposed by the Cal Poly Supermileage club. The goal of this project is to deliver a fully assembled vehicle chassis by the end of the 2023-2024 school year to be used by the club in the 2025 Shell Eco-Marathon competition. The competition requires a four-wheeled vehicle to comply with various requirements outlined in the Shell Eco-Marathon rulebook, such as dimensions and some safety requirements. The team selected a backbone-style chassis as the design direction. This design consists of a main structural beam that supports all other chassis and vehicle components. This main …

Impact Force Helmet Device For Concussion Monitoring, Patrice Mulligan, Karina Mealey, Zack Borthwick, Benjamin Fick

General Engineering

To track head trauma in football, our device is placed inside a football helmet to measure both linear and gyroscopic (rotational) accelerations. These measurements are taken using an ADXL375 linear accelerometer and an LSM6DSOX accelerometer and gyroscope. The data from these sensors is processed and transmitted wirelessly by a SparkFun Thing Plus microcontroller to another SparkFun Thing Plus microcontroller connected to a laptop on the sidelines. Our program on the laptop stores the acceleration impact data into a .csv file for each player. If a likely concussive impact is detected, the program displays a popup warning. Testing results were promising …

3d-Printed Remote Controlled Aircraft, Sebastian Bessoudo, Jose Ramirez, Manny Ruiz, Andrew Edwards

Mechanical Engineering

The Senior Project for the 3D Printed Aircraft presents a compelling challenge to the team: design and fabricate an aircraft for the Cal State LA 3D-Printed Fixed-Wing Aircraft Competition, comprising three distinct events: Flight, Design, and Simulation. The objective of the flight competition is to achieve the longest flight duration, while the design event emphasizes innovation and originality. In the Simulation contest, our aircraft's CAD model undergoes Computational Fluid Dynamics analysis to assess its aerodynamic performance. These competitions are slated for May 2024.

While building the aircraft has its limitations due to the source of our construction being only 3D …

Miniature Train Engine, Jason Patrick Lacson Del Castillo, Renato Andrew Dilauro, Sophia Theresa Tiu, Robert John Pallares Iii

Mechanical Engineering

This report details the redesign of the Mini Train Prop for the SLO Civic Ballet’s The Nutcracker, aiming to create a lighter, more user-friendly, and easily maneuverable train. The Final Design Review (FDR) includes the design process, manufacturing plan, and justifications for decisions made. Key improvements are reducing the train's weight, automating the fake wheels, and enhancing maneuverability with a neutral pin and lever system. In this report we detail the significant changes since the Critical Design Review (CDR). The implementation covers procurement, manufacturing, and assembly, while design verification ensures compliance with cost, weight, turn radius, and structural integrity specifications. …

Removable Equipment Climate Canopy, Jessica Perez, Sabine Heid, Zil Panchal, Anali Salazar

Mechanical Engineering

The Climate Canopy Project has developed an improved solution for creating an adjustable shade mechanism tailored specifically for users of pull walkers. Through extensive research, goal setting, and a comprehensive framework our project has examined the challenges faced by individuals who rely on walkers for mobility. Our stakeholder requires a product that is lightweight, removable, and compact. This study dissected the designs of previous products on the market and aimed to build a product that aligns with our sponsor’s desires.

This report presents the main goals for the design and manufacturing process, along with key design features utilized to produce …

Finite Element Analysis Of The Bearing Component Of Total Ankle Replacement Implants During The Stance Phase Of Gait, Timothy S. Jain

Master's Theses

Total ankle replacement (TAR) implants are an effective option to restore the range of motion of the ankle joint for arthritic patients. An effective tool for analyzing these implants’ mechanical performance and longevity in-silico is finite element analysis (FEA). ABAQUS FEA was used to statically analyze the von Mises stress and contact pressure on the articulating surface of the bearing component in two newly installed fixed-bearing total ankle replacement implants (the Wright Medical INBONE II and the Exactech Vantage). This bearing component rotates on the talar component to induce primary ankle joint motion of plantarflexion and dorsiflexion. The stress response …

Cnc Retrofits, Fabian Samano, Murat Askin, Daniel Lonczak, Zane Campise

Mechanical Engineering

The Boxford CNC Lathe is a machine used for educational purposes. The goal of the CNC Retrofits project is to improve the Boxford MT2’s performance and functionality to enable Mr. Lonczak to manufacture customized ballpoint pens. Within this Final Design Review (FDR) document, we present design updates since the CDR and implementation/assembly techniques. This work culminates in a solution to Mr. Lonczak’s needs which is analyzed in three subsystems: main control, spindle position tracking, and user interface. Within this report, we show the results of each subsystem’s verification process. These results prove that the design concept was met by describing …

Deep Ocean Vehicle Applications And Modifications, Nichole "Nikki" T. Arm

Master's Theses

This project had two primary goals: (1) to explore opportunities to further a deep-ocean vehicle’s reach using alternative pressure spheres, and (2) to implement an existing deep-ocean vehicle (lander) in active scientific research.

I gained a greater understanding of the limitations and design choices made for existing pressure spheres using Finite Element Analysis (FEA). My simplified FEA model predicted sphere failure for the existing 30% Fiber Glass 70% Nylon injection molded spheres at an external pressure of 3,954psi or 2,690m ocean-depth (only a 7.38% error compared to the tested minimum failure depth), so I determined it a valid model. I …

Discourse Analysis In Engineering: Investigating Patterns In Brainstorming Conversations, Aimee Chiem

Master's Theses

Brainstorming is a critical part of the engineering design process and can have a significant impact on the outcomes of the overall project. While research has studied the outcomes of brainstorming and the ideas that teams generate, the role that language and conversation play in these activities is still relatively underexplored. Observing the different ways people use specific types of discourse can reveal how conversations can affect brainstorming itself. To that end, this research aims to answer the following questions:

1) What are the different kinds of discursive moves that students make during engineering brainstorming activities?

2) What patterns or …

Additive Manufacturing And Characterization Of Auxetic Structures, Jayesh P. Moore, Stephanie R. Ruzicka

College of Engineering Summer Undergraduate Research Program

An auxetic structure is an arrangement of unit cells that under a uniaxial load experiences expansion in both the longitudinal and transverse directions, resulting in a negative Poisson’s ratio (NPR). Research in auxetics has led to new insights into how non-linear mechanical reactions can be applied to various engineering fields. This project utilized stereolithography (SLA) 3D printing to manufacture auxetic test specimens to analyze of geometry-driven NPRs. With the distinctive mechanical properties of auxetic structures and vast applications, the future of product development of these geometries seems promising.

Robotic Origami Worm, Carter Josef, Michael Freeman, Mohammad Hasan

College of Engineering Summer Undergraduate Research Program

Soft robotics can solve many unique engineering problems. The ancient art of origami has inspired design for a new breed of robots. In this research, a novel fold design was created which has high linear stiffness, high bending stiffness, and the ability to deform omnidirectionally in order to turn. The robot is operated using a DC motor to expand and contract and electromagnets to control friction. The robot moves very quickly compared with many other origami robots in the literature. Other interesting ways to control friction were explored including expansion mechanisms. An origami design was created and tested that expands …

Additive Manufacturing For Medical Education, Michael Noon

College of Engineering Summer Undergraduate Research Program

A growing body of evidence is suggesting that anatomical knowledge, the keystone of many medical specialties, is suffering among new graduates. While a host of reasons are provided, one common thread that many point to is the decline of cadaver dissections in the classroom. Many virtual audio-visual tools are used to address this gap, yet evidence has shown their ineffectiveness. Given this gap, the high degree of flexibility found in additive manufacturing (AM), and the many uses AM has already found in the medical field, we propose its use to fill this gap, allowing for students to learn with touch …

Review Study On Promoting Diversity And Inclusion In Engineering Education Through Digital Twins, Devon Bountry

College of Engineering Summer Undergraduate Research Program

This study investigates the effect of digital twins in engineering education. This research was based on published research papers, conference papers, and case studies. Throughout a large range of studies, it was shown that digital twins can increase learning motivation and retainment through uses such as game-centered learning, personalized learning, and virtual prototyping. Particularly in engineering laboratory classes, digital twins can increase the variety of laboratory options while not increasing the cost due to equipment. This results in less barriers for students as there are more learning tools available at no additional cost or other requirements.

Theoretical And Experimental Study Of Active Magnetic Bearing Control Integrated On Bently's Rotor Kit, Arturo Mario Flores

Master's Theses

This thesis focuses on the comprehensive study of controlling a customized Active Magnetic Bearing (AMB) installed on Bently Nevada’s RK4 rotor kit in Cal Poly’s Vibrations and Rotordynamics Lab. The AMB was uniquely designed and manufactured by a Cal Poly senior project team to fit Bently’s rotor kit and the results of this research are distinctive to the custom system. To achieve practical functionality of the AMB system, we designed a controller a Virtual Instrument (VI) using the National Instrument software, LabVIEW. From the experimental study, we calibrated the programming to find unknown parameters of the AMB system and validated …

Headlamp/Bike Light Damping System, Ethan Reece Clark, Alec Stonehouse, Omeed Ostry, Mitchel Anderson

Mechanical Engineering

The task for this project is to design a headlamp and/or bike light that absorbs the impact shocks from the user’s actions. The user that the system is being designed for may be riding a bike or running on a trail in the evening or early in the morning where the light needs to be stabilized and their path must be illuminated. This report presents the final design chosen after months of prototyping and design iteration. It encompasses the system design, design verification through testing, implementation, future recommendations, and lessons learned throughout the process. The chosen design utilizes a fully …

Baja Sae Semi-Active Suspension, Cameron Paul Jones, Ethan Jacobi Mikel, Joshua Macguire Wright, Aditya Garg

Mechanical Engineering

This document outlines the design and justification for the final design of the Baja SAE Semi-Active Suspension Senior Project. The goal of the project was to build a base valve that can adjust suspension damping rates on the fly. This document details the ideation, design, manufacturing, design verification results, and detailed drawing package for the project. Additionally, this document includes information regarding the pressure drop calculator, O-ring calculations, and CAD. The manufacturing processes used to create the valve and the testing and evaluation of the valve are included as well. Finally, the methods that were used to manage this project …

The Center For Centering Dome, Olek Piechaczek, Ryan M. Scharf

Architectural Engineering

The Center for Centering seeks to create a large-scale healing center, conducive to individual centering of the mind and body. This mobile installation provides a relaxing, enclosed space while still maintaining a connection to the outdoors. The clients liked the idea of having a pop-up installation that could be easily set up as a touring display. With a deadline for installation looming in June 2022, a team of students had five months to design and manufacture the structure.

In winter 2022, the students developed custom geometry to minimize the number of individual parts and built a ¼ scale model of …

Sky Survey Radio Telescope, Jack E. Mcguigan

Electrical Engineering

This document outlines the design of a radio telescope designed to perform hydrogen line sky surveys. The telescope produces radio images mapping the intensity and relative velocities of hydrogen concentrations to their sky coordinates. Over the course of a day, the telescope images the regions of space visible to it, allowing sky survey imagery to be updated daily. Sky survey images are comprised of an array of pixels corresponding to specific sky coordinates. Each 8-bit RGB pixel contains information on the concentrations of hydrogen in the brightness and relative velocity in the color. Radio images mapping the concentrations and velocities …

Prove Primary Battery Structure, John D. Burkhart, Andy Mccormick, Ryan Yu, Soren Barclay

Mechanical Engineering

In conjunction with Prototype Vehicle (PROVE) Laboratory, our group designed, manufactured, and tested a prototype structure to house the battery boxes for PROVE’s endurance vehicle. Our structure was designed to support the batteries during normal use, and in the event of a front crash. Our design is comprised of a secondary composite box to house the battery boxes, a bottom plate to affix the secondary box to the chassis floor, a horizontal plate fastened to the chassis, and a brace structure welded to the chassis. From the outset, we chose to use a secondary box, the primary battery boxes must …

Programmable Vibration Table Retrofit With Eagle Medical, Jonathan Ilagan, Madhav Asok, Max Lewter

Biomedical Engineering

This project aimed to repair and upgrade a vibration table used for package testing for the sponsor, Eagle Medical - a medical packaging and sterilization company based in Paso Robles, California. The current vibration table is not programmable and lacks circuit diagrams, making it difficult to repair. In addition, it is not functional due to internal circuitry issues and power requirements. To address these issues, the team will implement several upgrades to improve the product and allow for better random cyclic vibration testing. A full assessment of the existing vibration table will be conducted to ensure the viability of these …

Implementation Of Topology Optimization Into The Mechanical Design Process, Nolan Clapp

Master's Theses

Topology Optimization is a lightweighting method based on finite element analysis that produces a part with optimum material distribution in the design space. Results from topology optimization often have organic shapes and curves that are difficult if not impossible to machine with traditional subtractive manufacturing methods. This paper analyzes the implementation of the Solidworks® Topology Optimization add-in into the mechanical design process and discusses required postprocessing to ensure manufacturability of the optimized part though a case study on two example parts. Results of traditional optimization, topology optimization and “selective” optimization (optimization using the results from topology optimization to selectively remove …

Design Of A System To Investigate The Relationship Between Feedback And Delivery Medium For A Novel Motor Task, Ashley Humpal

Master's Theses

Stroke is a chronic, lifelong illness, and full recovery requires continuous physical and cognitive rehabilitation. Such long-term rehabilitation is cost-prohibitive; however an approach to providing long-term therapy that has recently gained traction is the use of socially assistive agent (SAA) systems. These systems make use of non-contact communication devices and can be used to guide people through a variety of rehabilitative tasks. They have the potential supplement current rehabilitation practices by providing motivation during intense exercises, and can extend the reach of the therapist into remote and home settings.

Though SAA systems have been used in a variety of rehabilitative …

Novelty Ice Cream Assembly Prototype, Mason Sylvester, Logan Williamson, Alvaro Martinez, Adin Gilman-Cohen

Mechanical Engineering

Cool Beans USA is a novelty ice cream startup company founded by Keith Zachow. In the winter of 2022, our team began working with Mr. Zachow to develop a machine to automate parts of the production process for his product. This product consists of two hemispherical ice-cream cone shell halves filled with soft serve ice cream and pressed together. The assembled pods are around the size and shape of a small walnut and are intended to be sold in stores as a frozen finger food. At the time of project inception, this product was in its early stages and was …

Rotating Backing Brush, Caleb Savard, David Dalal, Max Allred, Mathis Weyrich

Mechanical Engineering

In the final steps of GAF’s shingle production process, small asphalt particles called fines are applied. Some fines adhere well to the shingle sheet, while others temporarily stick only to fall off the sheet further down the manufacturing line. As a result, the shingle plant floor is covered in fines that have fallen due to vibrations and gravity. The technicians and engineers at GAF want a cleaner working environment and to potentially reuse the loose fines. We are a senior project team that solved this problem by designing a system to remove and collect loose fines. In this document, the …

Baby Soothing Device, Grace Kalene Mekrut, Matteo Gozzini, Miles Angel Ibarra, Christian Joel Roberts

Mechanical Engineering

This document is the official final design review for the Baby Soothing Device. This product is intended to help families sleep throughout the night by allowing a baby to be soothed back to sleep without constant and direct parental interaction. It is maintained by Mechanical Engineering students at California Polytechnic State University, San Luis Obispo for Dustin Yoder, the project sponsor. The purpose of this document is to present the design process from ideation to finished design in great enough detail that its manufacturing procedure may be replicated if desired. This document further explains all the research, testing, and benchmarks …