Mechanical Engineering Commons^™

Moving Hands-On Mechanical Engineering Experiences Online: Course Redesigns And Student Perspectives, Jaclyn E. Johnson, Nancy B. Barr

Michigan Tech Publications, Part 1

Hands-on lab experiences are essential for enabling students to be successful engineers, especially those who identify as kinesthetic learners. This case study describes how a Mechanical Engineering Practice course sequence was redesigned during the COVID-19 emergency transition to remote learning and examines how students responded to these changes. The remote course included videos of Graduate Teaching Assistants conducting data acquisition phases of the practice session to replace hands-on experiments. To understand student perspectives and performance, researchers reviewed approximately 400 reflective essays from Spring 2020 and compared assignment submissions between Fall 2019 and Spring 2020. Results suggest that some students perceived …

Jcati - Drive System, Tim Boswell

All Undergraduate Projects

Each year, Mechanical Engineering Technology students receive a grant from The Joint Center for Aerospace Technology Innovation (JCATI) to engineer a device that is capable of breaking down carbon fiber trimmings for recycling. The students who received the grant this year have redesigned portions of the existing system in an attempt to solve issues that have kept the system from working properly in the past. Though much collaboration between group members has been needed, each member has been responsible for their own portion of the project. The purpose of this portion of the project has been to address binding and …

Rc Baja, Ryder Satak

All Undergraduate Projects

American Society of Mechanical Engineers (ASME) hosts an RC Baja competition yearly at Central Washington University where schools from around the state gather to compete. The competition is based and scored from three different events: drag race, slalom, and a Baja course. Performing well in both the competition and other various tests will deem the car successful. The differential and drive train are two important features that allow the car to function properly. Using Solidworks 3D software and a 3D printer, the engineers were able to design functional components. The differential is designed to allow the rear wheels to spin …

Thermal Conductivity Measuring Device, Kyle Saalfeld

All Undergraduate Projects

The thermal conductivity measuring device is used to measure thermal conductivity of solids, liquids, and food products. Thermal conductivity is a material property that determines the rate at which heat disperses through a material. This determines how well insulation works, what materials are used as heat sinks, refrigeration, and how thoroughly food is cooked. The device measures thermal conductivity by heating up a thermistor bead using a high magnitude current for a measured duration and allowing the given heat to disperse; meeting the goal of designing a device that can easily measure the conductivity. Additional requirements of this device include …

Hydraulic Balsa Wood Rising Bridge, Kaitlyn Greenfield

All Undergraduate Projects

What is the solution to allowing tall vessels to navigate past a vehicle bridge that is less than 10 [ft] above the water? To answer this question, a balsa wood bridge was designed, constructed, and tested. The bridge needed to articulate by mechanical means, allow for travel through the bridge, and be able to withstand ample force while the main structure only being constructed of balsa wood and glue. The project was analyzed in sections. These sections include: the bridge structure and its members, the hydraulic lift, and the pins needed for the bridge and hydraulic lift to operate. The …

Material Handling System For An Advanced Flexible Manufacturing Environment, Con Cronin

Theses

A Flexible Manufacturing System (FMS) is a method of production that is designed to easily adapt to changes in the type and quantity of the product being manufactured. Machines and computerised systems can be configured to manufacture a variety of parts and to handle the changing levels of production that is required. The aim of this project was to investigate the current manufacturing processes of Kostal Ireland GmbH with the aim of developing a bespoke prototype material handling system to achieve flexible manufacturing. Kostal Ireland GmbH currently do not have the ability to change their manufacturing operations easily when a …

Let's Collaborate! The Importance Of Cybersecurity Pathways And Their Accessibility, Vukica Jovanovic, Otilia Popescu, Murat Kuzlu, Petros Katsioloudis

Engineering Technology Faculty Publications

[Introduction] I am very passionate about inspiring a new generation of the STEM workforce. Going through the engineering pathway myself since 9th grade, I have seen the value of technical education and early career choice. In high school, I learned so much about math and science, but also about the technical and applied aspects of STEM professions. I had one apprenticeship in electrical power and aluminum mill companies where I explored how the concepts from the classes convey to the real world. It was so much easier to learn all the equations and different aspects of technology from the textbook …

Customizable Armor Set, Olivia Reedy

Williams Honors College, Honors Research Projects

This project is intended to help people who make costume armor by reducing the amount of time and money it takes to create a set of armor. Making armor can take a lot of resources for beginners, and this project is intended to help hobbyists with that process. This customizable armor set goes through the engineering design process, from the initial design of the parts to creating the prototype using vacuum forming. The prototype armor can be painted and adhered to using acrylic paint and contact cement, respectively, and fits three sizes of small, medium, and large.

Camper Conversion, Owen Christian Hafler, Zebediah Paul Benedict Zehentbauer, Madilyn Beatrice Willis, Zachary Eli Owen, Justin Robert Nicholas

Williams Honors College, Honors Research Projects

The COVID-19 pandemic of 2020-2021 has seen hundreds of thousands sequestered in quarantine for long periods of time. When quarantined in an urban setting, many cannot leave their respective apartment buildings which only adds to the strain of isolation. In the context of isolation, the design team of Hafler, Nicholas, Owen, Willis, and Zehentbauer personally sought to incorporate their individual enthusiasm for nature with the benefits of living off-grid. After initial research and deliberation, the team discovered the “Skoolie” community and the plans for a mobile tiny home began production.

The team outlined the design project as the full design, …

Theoretical Design Of A 360 Degree Pendulum Ride, John William Elliott

Williams Honors College, Honors Research Projects

This project uses several areas of study: mechanical physics/design of moving parts, electrical power, and human comfort. It is based on the pendulum ride at Cedar Point called "maXair." One of the goals with this project is to create a theoretical, simpler version of a 360 Degree Pendulum Ride that operates on the same principles of a conventional pendulum rides. The velocity, forces on the shaft in the middle of the ride, the accelerations, the g force on the riders, and all the other forces associated with the pendulum ride were analyzed as well.

In The Pursuit Of Assistance: A Team's Desire To Not Let A Congenital Amputation Get In A Young Boy's Way, Carl Russell Iii, Gavin Loucks, Kirsten Wozniak

Purdue Journal of Service-Learning and International Engagement

EPICS is a service-learning design program run through Purdue University. It strives to teach students design skills through providing for individuals, communities, and organizations in the surrounding area while mirroring engineering industry standards. BME (Biomedical Engineering) is a team within EPICS that strives to serve community partners through biomedical applications. William Sevick is an elementary school student with a congenital arm amputation. William and his family have been working with the BME team for the past three years designing assistive devices with the purpose of improving his actions in daily life such as eating, playing games, and riding his bike.

Heavenly Bodies Rsvp, Justin Tyler Spitzer, Allison Jean Turnbaugh, Jack William Boulware, Braden Alex Lockwood

Mechanical Engineering

The purpose of the Heavenly Bodies RSVP project was to design and fabricate planet props, as well as a mechanism by which they could be raised and lowered in California Polytechnic State University’s Pavilion theater. The project team was comprised of four fourth year mechanical engineering students: Allison Turnbaugh, Braden Lockwood, Jack Boulware, and Justin Spitzer. We conducted extensive research to determine the ideal solution for the design problem brought to us by our sponsor. In our analysis, we discovered that the most important aspects of our design were the absolute reliability of the system, fire retardant material selection, and …

Electromagnetic Actuator For Camless Engines, Nicholas Olesh, Charlie Thomas Glenwright, Tim Wills De Tone, Darya Daniel Darvish

Mechanical Engineering

This document summarizes the research, objectives, project plan, and design for developing an electromagnetic actuator valve for use in a camless internal combustion engine. While electromagnetic valve actuators have not been implemented into a working product to date, there have been many attempts to research and develop working prototypes. Similar products have been developed, but they do not use purely electromagnetic actuation. This research is significant because it shows the challenge that must be overcome and outlines potential design solutions to the problem. The objectives section highlights the problem statement and what is aimed to be achieved in this project. …

An Assessment Of Renewable Energy Technology Implementation In Storrs, Connecticut: Emissions Reduction And Feasibility Of A Microgrid System At Uconn, Sophie Macdonald

Honors Scholar Theses

The purpose of this project is to design a clean energy-sourced microgrid for UConn’s main campus that would reduce the university’s energy emissions while remaining within the geographic boundaries of viable UConn-owned land. Economic cost was not considered in this analysis; instead, emissions and space constraints were the optimized measures of value and feasibility. Sources of energy that were considered include photovoltaics (PV), wind turbines, hydrokinetic systems, and fuel cells. Energy storage capacity was included in the analysis as well. The overall system was optimized first by ignoring space constraints and for a minimum of 10% reduction from the current …

Geometric Iteration Of A Knee Prosthetic And Static Stress-Bearing Capacity, Alexander Wheeler

Honors Program: Senior Projects (Public)

The purpose of this study was to improve a prosthetic knee model in terms of size, weight, and biocompatibility. Several tests were run to determine its effectiveness in supporting static and quasistatic loads. The positions in which these tests were run include static upright standing, static one-knee 90 degree kneeling, static squatting at maximum flexion, and quasistatic midstride. These simulations were conducted to find areas of high stress and strain. These patterns were used to determine the maximum body weight a physical prosthetic could support. The material used to create the prosthetic was changed from AISI 316 stainless steel to …

Jcati Composite Delaminator, Payden Coffman

All Undergraduate Projects

Improvements need to be made to the existing delaminator system designed to crush proprietary Boeing 777 composite material. The current design incorporates a hydraulic system to achieve the high loads needed to separate material layers. The new system will need to be able to apply the same loads while at the same time allowing for a constant feed of material through the system. To achieve this, a “gear-like” crushing system will be implemented that will apply a high enough radial load into the material that will achieve delamination equal or greater than the previous design while at the same time …

Efficiency Of Gas Turbine Engines, Tahir A. Upshaw

The Kennesaw Journal of Undergraduate Research

The following research involves conducting a confirmation of test bench results, and parametric cycle analysis. The results from these two methods of data collection is meant to show relationship between both. Where the data of the price induction can be verified with the parametric cycle analysis of the individual components to calculate the thrust and efficiency. Once we compare both methods, it will allow us to move on to part two of the research which involves determining how to make gas turbine engines more efficient based on the collected data.

Mini Baja Frame Analysis, Jacob Swanson

Williams Honors College, Honors Research Projects

The purpose of our senior design project is to optimize the Baja frame to reduce its weight and material cost while keeping the required rigidity. Through force analysis we will be able to determine if any rigidity is lost by removing a set of tubes (figure 1), along with the other forces seen by the frame. If it is found that the frame rigidity is still within the determined factor of safety, 2, then we will be able to reduce the frame weight and the number of tubes that make up the frame. Along with force analysis, we will use …

Ideal Lacrosse Stick, Josh Beck, Tyler Skoloda, Noah Reed, Stanley Dembosky

Williams Honors College, Honors Research Projects

This project is focused on the design of a new and innovative lacrosse stick. Our main points of focus will be the strength and durability of the head. As well as solving some of the problems that exist in existing equipment. These problems were identified by interviewing experienced players at the college level. Benefits would include a stronger head that is easier to use for a player on the field to do things like pass, catch, shoot, and field ground balls in an optimal manner. Normally players will have to purchase new heads every season as a result of warping …

Tabletop Mechanical Tester, Jamie Dombroski, Brian English, Richard Leffler, Andrew Shirk

Williams Honors College, Honors Research Projects

The need for hands-on and face-to-face experiences in the engineering classroom is very great. The equations, principles, and concepts can all be learned, but without the visual and tactile application, these don’t always sink in or become concrete. A small-scale tensile test machine was designed, sourced, manufactured, and tested for the purpose of being applied in classroom settings to provide this experience to engineering students. Extensive research was performed concerning tensile machines on the market, the essential elements of which are the load cell, grips, crosshead, extensometer, motor, and frame. The raw materials for the frame were purchased and drawings …

Adaptive Multi-Fidelity Modeling For Efficient Design Exploration Under Uncertainty, Atticus J. Beachy

Browse all Theses and Dissertations

This thesis work introduces a novel multi-fidelity modeling framework, which is designed to address the practical challenges encountered in Aerospace vehicle design when 1) multiple low-fidelity models exist, 2) each low-fidelity model may only be correlated with the high-fidelity model in part of the design domain, and 3) models may contain noise or uncertainty. The proposed approach approximates a high-fidelity model by consolidating multiple low-fidelity models using the localized Galerkin formulation. Also, two adaptive sampling methods are developed to efficiently construct an accurate model. The first acquisition formulation, expected effectiveness, searches for the global optimum and is useful for modeling …

High Strollers, Braeden Hammond, Morley Perrin, Reid Bartels, Juan Rodriguez

Mechanical Engineering

This report documents the final product of Jonathon’s new lightweight stroller. The Mechanical Engineering team from Cal Poly, High Strollers, began the project to create a lightweight stroller for the project sponsor, Nina Aguayo, and her son, Jonathon Aguayo, in Fall of 2018. Jonathon is diagnosed with Delayed Brain Development and Hypotonia with some characteristics of Cerebral Palsy. He has a 50lb high intensity stroller to go to and from school. Mrs. Aguayo needed a stroller that is easier to transport while still meeting all of Jonathon’s needs. The re-designed stroller will make leisurely outings for Mrs. Aguayo and Jonathon …

2019 Ieee Southeastcon Hardware Competition: A Systems Engineering Approach, Emily Sage

Mahurin Honors College Capstone Experience/Thesis Projects

The Institute for Electrical and Electronics Engineers (IEEE) Huntsville section invites college students to participate in their annual SoutheastCon Conference. Western Kentucky University sends a team of engineering students to the hardware competition, an opportunity for students to design and build autonomous robots. The 2019 hardware competition called for students to develop a robot that could collect and sort debris by color. This thesis outlines the project lifecycle of the WKU 2019 SoutheastCon robot with an emphasis on implemented systems engineering tools and techniques. Systems Engineering is an interdisciplinary approach to project management that focuses on treating the overall project …

Asme Student Design Competition, Marcus Todd

Mahurin Honors College Capstone Experience/Thesis Projects

For the completion of my capstone project with the Western Kentucky University Honors College, the following document details my experience with the American Society of Mechanical Engineer (ASME) Student Design Competition. This project was completed in a two semester sequence through working with a team of four. One semester focusing primarily on the design and the other on fabrication and evaluation. The 2019 ASME competition was the Pick and Place Race. In this event, 46 teams were challenged to design and construct a device having the ability to pick up balls of varying size. Both the design and assembly process …

Investigating The Impact Of Taper And Aspect Ratio On A Stalling Wing Using A Corrected Vortex Lattice Method, Ryan Anderson

Undergraduate Honors Theses

The advent of new technologies such as eVTOL vehicles is exciting. The development of fast aerodynamics models incorporating stall is one small step on the road to realizing such concepts by improving the speed of design optimization algorithms. To this end, a modified vortex lattice model was developed based on one reported by dos Santos and Marques [4]. The model was validated against experimental data found in the literature. Making use of its stall capabilities, a sample study was performed to test for any coupling effect between aspect ratio and taper ratio. This was done by calculating the lift curve …

Feed Control: Composite Recycle, Rosy Perez

All Undergraduate Projects

The Boeing Company gave Central Washington University an opportunity for students to research and come up with an idea to reduce costs and landfill waste caused by the trimmings from the 777x composite wing pieces. The engineering and manufacturing for this project is about transporting composite material through to the delamination and chipper process. The delamination process uses a ram to press two claw shaped devices together that bends and deforms the material in opposite directions. The chipper process uses counter rotating saw blades spaced 1/8” apart to produce small shredded material. It is important for this newly designed feed …

R/C Mini Baja: Drivetrain, Kyle Aitken

All Undergraduate Projects

A device is needed that can power the back wheels of R/C car and allow it to drive smoothly. This drivetrain also has to transmit power to the axles in an acceptable height range to comply with the frame and suspension. The project was supported by a team member who designed the frame and suspension. The design of this project consists of two sub-assemblies that make up the drive train assembly. The transmission assembly uses gears to convert the rotational speed from the motor to the drive shaft. The gearbox assembly also uses gears and converts the rotational speed from …

Design, Control, And Optimization Of Robots With Advanced Energy Regenerative Drive Systems, Poya Khalaf

ETD Archive

We investigate the control and optimization of robots with ultracapacitor based regenerative drive systems. A subset of the robot joints are conventional, in the sense that external power is used for actuation. Other joints are energetically self-contained passive systems that use ultracapacitors for energy storage. An electrical interconnection known as the star configuration is considered for the regenerative drives that allows for direct electric energy redistribution among joints, and enables higher energy utilization efficiencies. A semi-active virtual control strategy is used to achieve control objectives. We find closed-form expressions for the optimal robot and actuator parameters (link lengths, gear ratios, …

Stair Climbing Hand Truck, James Mcpherson

All Undergraduate Projects

Abstract

Getting a heavy object up a flight of stairs usually requires a team of two or more people. Even with a team of people, the task is often still difficult, dangerous, and possibly insurmountable by one person. This problem is especially prevalent in for those who are moving into apartment complexes. Most apartment complexes have many buildings with two or more floors of living quarters, and elevators are often missing. This project sought to offer a solution to this problem. The solution in question; a motorized hand-truck with 2, trigonal planar pinwheels in place of the stock wheels. The …

Autojack - Hydraulic Powertrain System, Tyce Vu

All Undergraduate Projects

A primary problem for mechanics and automotive enthusiasts is the risk associated with lifting and securing a vehicle with conventional jack stands. Often times, improper jack-stand installation results in the vehicle collapsing unexpectedly, causing injury and/or death. This problem can be minimized through the application of a newly re-designed vehicle lifting system. The conventional method for lifting cars is time consuming and can be unsafe in many circumstances. A better, safer, and more efficient lift design was needed; the AutoJack. The approach of the AutoJack design was entirely focused on the safety of lifting a vehicle. Safety was improved by …