Mechanical Engineering Commons^™

Implementation Of Wireless Temperature Sensors For Continuous Condition Monitoring Of Railroad Bearings, Andoni Zagouris Ii

Theses and Dissertations - UTB/UTPA

At present there are no existing bearing health monitoring systems capable of continuous monitoring of railroad bearings. Current wayside equipment is used to collect intermittent bearing temperatures, which at times could be every 65 km (~40 mi). To answer this need, IONX, LLC, a subsidiary of Amsted Rail, Inc., has developed low power Wireless Sensor Nodes (WSNs) which can be retrofitted to existing bearing adapters. The WSNs provide continuous monitoring of bearing temperatures as well as the current ambient temperature. Since the nodes are affixed to the bearing adapter surface, a correlation is necessary to estimate the bearing cup temperature …

Surface Wetting And Friction Studies Of Nano-Engineered Surfaces On Copper Substrate, Julius Sheldon Morehead

Graduate Theses and Dissertations

Nano-engineered-textures on a material surface can dramatically improve the wetting and non-wetting properties of a surface, and they also show promise to address friction issues that affect surfaces in contact. In this work, aluminum-induced crystallization (AIC) of amorphous silicon (a-Si) was used to produce nano-textures on copper (Cu) substrates. A study was performed to examine the effects of changing the annealing conditions and a-Si thickness on nano-texture formation. The creation of various nano-topographies and chemically modifying them using octafluorocyclobutane (C4F8) was performed to control hydrophilicity, hydrophobicity, and oil affinity of nano-textured surfaces. A video-based contact angle measurement system was used …

Development Of A Structured Concrete Thermocline Thermal Energy Storage System, Bradley M. Brown

Graduate Theses and Dissertations

The past couple of decades have shown a concern when considering the way the world obtains its power. The focus has been switching from fossil fuels that have been used for hundreds of years to renewable energy sources, such as the sun. Solar energy is readily and infinitely available for harnessing. One problem with solar energy, though, is its inability to be used during the night time and during cloud covered weather. A solution to this problem is the use of energy storage mechanisms. For solar plants that use solar thermal energy (concentrating solar power plants), thermal energy storage (TES) …

An Investigation Into Temperature Trending In Railroad Tapered Roller Bearings Through Vibration Monitoring Techniques, Rafael Kristian Maldonado

Theses and Dissertations - UTB/UTPA

A series of laboratory experiments have been conducted at The University of Texas-Pan American to investigate the cause of bearing “temperature trending.” A combination of theoretical and experimental studies has identified potential sources for the abrupt changes in temperature often seen in railroad bearings. Previous studies suggest the possibility of vibration induced roller misalignment as the root cause for temperature trending. Subsequent research conducted by the UTPA team was designed to provide evidence through vibration monitoring techniques for the proposed hypothesis. To that end, a dynamic bearing tester was used to run four bearings at various speeds and loads experienced …

Fenestration Studies On Building Energy Using The Facade Evaluation Facility, Wendell Cocina

UNLV Theses, Dissertations, Professional Papers, and Capstones

The project was developed to assess several types of facades and their influence on building energy, mainly focused on windows and other building fenestrations. Requirements for the facility are stated in this paper alongside corresponding solutions. The facility is designed to represent a section of a building façade. Experimenting on a wide range of fenestrations including windows with integrated PV elements was the primary prerequisite. The option of removable façade configurations was used and allowed testing specimens to be changed effortlessly. Instrumentation and data acquisition are discussed including calibration and uncertainty analysis. Investigation of the air conditioning unit was concluded …

The Role Of Thermally-Induced Geometrical Changes In Temperature Trending Of Railroad Tapered Roller Bearings, Andrei G. Vaipan

Theses and Dissertations - UTB/UTPA

The understanding of the phenomenon of temperature trending of railroad tapered roller bearings is of paramount importance to the railroad industry. The problem that this poses to the industry is that it leads to false alarms triggered by wayside detectors, which forces the premature removal of defect-free bearings. This thesis provides more insight into this phenomenon and answers questions regarding the importance of key tapered roller bearing components geometry and geometrical changes during temperature trending events. In this study, dynamic experiments conducted in the laboratory have represented the primary method of testing bearing temperature trending. The experimental results are brought …

Analysis And Design Of An Anisotropic, Compliant Suspension Component, Samantha Jean Salinas

Theses and Dissertations - UTB/UTPA

A steering pad on a train is meant to reduce the force on the wheel while moving along a curve in the rail. A new steering pad was desired with properties tuned for a new suspension system design. An anisotropic, compliant pad was designed for a specific stiffness anisotropy, 20:1. Finite element analysis was performed on various models as a guide to designing a pin with the desired stiffness ratio. A design was chosen for a prototype made of thermoset polyurethane, a similar material to that currently used. Experiments were performed on the prototype pad model to determine vertical and …

A Study Of A Novel Modular Variable Geometry Frame Arranged As A Robotic Surface, Christopher James Salisbury

UNLV Theses, Dissertations, Professional Papers, and Capstones

The novel concept of a "variable geometry frame" is introduced and explored through a three-dimensional robotic surface which is devised and implemented using triangular modules. The link design is optimized using surplus motor dimensions as firm constraints, and round numbers for further arbitrary constraints. Each module is connected by a passive six-bar mechanism that mimics the constraints of a spherical joint at each triangle intersection. A three dimensional inkjet printer is used to create a six-module prototype designed around surplus stepper motors powered by an old computer power supply as a proof-of-concept example.

The finite element method is applied to …

Energy-Based Analysis Of Utility Scale Hybrid Power Systems, Kwame Agyenim-Boateng

UNLV Theses, Dissertations, Professional Papers, and Capstones

The promise of large-scale use of renewables such as wind and solar for supplying electrical power is tempered by the sources' transient behavior and the impact this would have on the operation of the grid. Among the methods cited for addressing some of those concerns are exploring the complementary nature of solar and wind power generation, and through the use of supplemental energy storage. While the technology for the latter has not been proven to be economical on a large scale at the present time, some assessments of what magnitude is required can be made. An energy-based analysis of utility …

The Evaluation And Analysis Of The Impact Of Variability On The Twelve Workstation Factory, Hernando Garrido

Theses and Dissertations - UTB/UTPA

Presently, there is theory and work examples about factory performance presented in the book ―Optimizing factory Performance‖ by James Ignizio, Ph.D. The theory explains how to determine performance using three fundamental equations by considering the impact and propagation of variability through a 12-Workstation Factory Model, and a number of its variations. The objective of developing a simulation model was to serve as a tool for instructors to illustrate the impact and propagation of variability in the manufacturing industry and to investigate phenomena (i.e., time to reach steady state, impact of variability) in the three dimensions of manufacturing. The validation of …

Development Of Spray Cooling For High Heat Flux Electronics, Jeremy Scott Junghans

Graduate Theses and Dissertations

The thermal demands of modern day electronic systems require innovative thermal solutions. Spray cooling has proven to be able to cool heat fluxes orders of magnitude higher than traditional cooling methodologies. This work includes a comparison of spray cooling to standard thermal management methodologies. Key system parameters and considerations are discussed. The properties of available packaging materials and their effect on the reliability of a spray cooled system are presented. Parameters such as fluid temperature, droplet size, fluid velocity and flow rate all directly impact performance and are detailed in this work. Finally, results from of a wide range of …

Development And Implementation Of Challenge-Based Instruction In Engineering Graphics, Gregory A. Potter

Theses and Dissertations - UTB/UTPA

This thesis discusses the challenge-based instructional (CBI) lessons currently being developed for the Engineering Graphics course at UTPA. This endeavor concentrates on student retention, as well as the students’ ability to practically apply their new skills. Minority science, technology, engineering, and math (STEM) students have been found, in recent studies, to depart from STEM undergraduate fields to some extent because of the lack of real world connections to the subject matter. Also, the traditional way of teaching theory first and then assigning a task may actually stifle creative thought and innovation required in later STEM courses. Our use of CBI …

Characterizing And Optimizing The Molten Salt Cleaning, Yangyang Long

Theses and Dissertations - UTB/UTPA

Molten salt cleaning is an important cleaning approach in remanufacturing which can remove a variety of contaminants from metal substrates with high efficiency. Facing the very limited research of this approach in literature, this thesis intends to characterize molten salt cleaning process and optimize its parameters when big parts with complicated shapes are cleaned. Based on the development of molten salt cleaning and studies on contaminations, two experiments are conducted. The first one investigates the influences of the hot salts on three metal substrates and shows the applicable of cleaning carbon steel and grey iron parts with molten salt. The …

The Design, Development, And Optimization Of Variable And Fixed Orifice Dampers With Empirical And Experimental Testing For Implementation In The Railroad Industry, Charles K. Speck

Theses and Dissertations - UTB/UTPA

The work of this thesis details the experimental testing, development, and optimization of the spools and system of the variable orifice damper system. The fixed orifice system was developed from concept, tested, and then redesigned. The experimental testing for the orifice selection directed the optimization and final design for the fixed orifice damper system. The testing focused on the evaluation of pressure drops and flow rate for static testing. The dynamic testing evaluated the displacement rate and force loading. Design, testing, and optimization worked to achieve designed flow rates and pressure drops provided by Amsted Rail based upon simulations. When …

Surface Optimization Of High Density Polyethylene And Carbon Nanofiber Composites For The Improvement Of Electromagnetic Shielding Effectiveness, Brandon C. Jarvis

Theses and Dissertations - UTB/UTPA

Nanoreinforced composites of High Density Polyethylene (HDPE) and Carbon Nanofibers (CNF) of varying nanofiber concentration were fabricated via melt mixing. Following fabrication, various metal and metal-nitride thin films were sputter deposited upon the substrates. Volume resistivity measurements of the composite substrates, as well as four point probe analysis of the composites and the deposited films were performed and are reported. Electromagnetic Interference (EMI) Shielding Effectiveness (SE) measurements were performed upon all samples in order to gauge the effects of percolation and the presence of the deposited film(s) upon overall SE. Comparisons of experimental measurements with analytical models available in the …

Design And Implementation Of An Actively Adjustable Spring Mechanism Via Redundant Actuation, Eleazar Marquez

Theses and Dissertations - UTB/UTPA

This study presents the theoretical results and experimental validation of an adjustable stiffness mechanism. The use of redundant actuation is emphasized in the design of a one-degree-of-freedom Watt II mechanism capable of independently controlling the effective stiffness without a change in equilibrium position. This approach is in contrast to previous spring mechanism designs unable to actively control the spring rate independent of deflection, and has potential applications in various types of suspension and assembly systems. Results indicate that driving the redundantly actuated, unidirectional, spring mechanism requires attaching two direct brush-type direct current motors on each of the two grounded revolute …

A Study Of The Effect Of Vibration On Railroad Bearing Temperature, Bertha Alicia Gonzalez

Theses and Dissertations - UTB/UTPA

An on-track collaborative field test and laboratory experiments were conducted in order to determine the relationship between abrupt rises in surface temperature of a railroad bearing and vibration signatures captured during the experiments. The collaborative field test was conducted in order to investigate the root cause for this abrupt temperature change known as bearing temperature trending. The research presented in this thesis will show that temperature trending is correlated to an increase in the magnitude of vibration within the bearing and the fundamental frequencies that are generated by the internal components of a rotating bearing assembly. Distinct vibration mechanisms are …

Photonic Crystal Design And Fabrication Assisted By Tunable Femtosecond Oscillator Laser, Kristofer B. Ohlinger

Theses and Dissertations - UTB/UTPA

Photonic Crystals have the potential for engineered light interaction as directed by the photonic bandgap, a property that details the prohibited propagation region and ultimately the ability to guide light. A so called, photonics-on-chip, would incorporate arbitrary light guiding with functional elements in one package. The realization of such a device is subject to the fabrication paradigms implemented and this thesis is concerned with holographic lithography as a means for creating polymer photonics crystal templates and two-photon polymerization for incorporating light guiding pathways.

In this thesis, the design of the to-be-fabricated structures has been co-opted by computational exploration of the …

On Nonlinear Response Of Micro And Nano Capacitive Resonators, Martin William Knecht

Theses and Dissertations - UTB/UTPA

The nonlinear response of an electrostatically actuated micro/nano-resonator is investigated. The resonator is parametrically actuated using an electrostatic force with a first order fringe correction. Viscous damping and the Casimir effect are included. The resonator is studied using the Method of Multiple Scales in a direct approach of the problem and then compared numerically using a Reduced Order Model based on the application of a Galerkin procedure. In addition to primary resonance (ω0), parametric resonances are found at half (½ω0), twice (2ω 0), and three-halves ([special characters omitted]ω0) natural frequency. The frequency response is investigated for excitations near primary and …

Design And Testing Of Orifice Valves For Use In Freight Railcars Hydraulic Suspension System, Awni K. Alshakhshir

Theses and Dissertations - UTB/UTPA

The work presented in this thesis describes the specific steps undertaken to design and test two spool type control valves that will be part of Amsted Rail’s innovative vertical hydraulic damper system. The design challenge lies in the requirement that these spool valves must maintain a linear relation between pressure drop, flow rate, and position, during the extension and retraction cycles of the hydraulic damper. To this end, a series of laboratory experiments were conducted on spools having different land geometries in order to acquire the optimum apertures that will produce the desired performance based on simulation data provided by …

Electrorheological Fluid Effect Of Polymer Coated Carbon Nanofibers And/Or Fullerenes In Liquid Crystals, Steven S. French

Theses and Dissertations - UTB/UTPA

An ER fluid is a ‘smart’ visco-elastic material, with flow properties influenced by external electric fields, whereby its viscosity increases within the field and returns to its inherent viscosity without the field present. This unique behavior opens many possibilities for new technologies. The optimization of ER fluid performance depends on the chemical and structural compositions of the particles in suspension and the suspension itself. Recent inclusion of nano-particles within ER fluids has shown a relationship to favorable ER trends. Therefore, this research involved nano-laden ER fluid samples of fullerenes (C60) and/or polymer coated carbon nano-fibers as the dispersed phases. These …

An Analytic Hierarchy Process Approach To Assess Health Service Quality, Yan Li

Theses and Dissertations - UTB/UTPA

While improving quality in health care is currently at the forefront of professional, political, and managerial attention, the key dimensions constituting health-care quality have not been fully understood. Also, few valid approaches have been proposed to the measurement of health-care quality. In this research, the Analytic Hierarchy Process (AHP) approach is applied to study the structure of health-care quality and deducted relative importance weights for each of the quality elements. A statistical quality model is derived to assess medical equipment quality which is an important part constituting the general health-care quality. Finally, the application of the AHP model to assess …

A Stochastic Product Priority Optimization Method For Remanufacturing System Based On Genetic Algorithm, Xiong Xiong

Theses and Dissertations - UTB/UTPA

Increasing number of manufacturers are developing remanufacturing facilities to recover end-of-life products for product/component reuse and material recycling while the high uncertainty pattern of returned products complicates the production planning. In this thesis a stochastic production priority optimization method, considering various priority concerns for remanufacturing systems is developed. Priority ranking and matching algorithm is developed to determine the priority rule, using thirteen weighting factors. Queueing models are developed to formulate the objective function, a genetic algorithm is then developed to search optimal solution under different business configurations. Result of this research will provide insights to priority assignment mechanism, which in …

Thermal Analysis Of Railroad Bearings: Effect Of Wheel Heating, Lariza A. Navarro

Theses and Dissertations - UTB/UTPA

Catastrophic bearing failure is a major concern for the railroad industry because it can lead to costly train stoppages. Excessive heat buildup within the bearing is one of the main factors that can warn of impending failure. The work presented in this thesis is motivated by the need to understand the heat transfer paths to the bearing when wheel heating occurs. A series of experiments and finite element analyses were conducted in order to quantify the different heat transfer mechanisms, with emphasis on radiation. The results indicate that the effect of thermal radiation is minimal when the wheel tread temperature …

Gas-Assisted Powder Injection Molding: A Comparison Of Residual Wall Thickness Between Metal Cavity Vs. Sla Cavity And Effect Of Mold Temperature On Residual Wall Thickness, Donghan Kim

Theses and Dissertations - UTB/UTPA

The effects of processing variables on gas penetration depth and Residual Wall Thickness (RWT) in an aluminum (Al) cavity of Gas-Assisted Injection Molding (GAIM) were investigated with Polypropylene (PP) and Stainless Steel Powder Feedstock (SSPF). The selected processing variables were melt temperature, shot size, gas pressure, and gas delay time. By using a Taguchi L9 array, the results were compared with previous work. For PP, there were no significant differences on gas penetration depth. However, the significance of gas delay time was relatively higher in an Al cavity as compared to a Stereolithography (SLA) cavity from previous work with SSPF. …

An Information Technology Suitability Index For Mass Customization, Oscar Leonardo Barrenechea

Theses and Dissertations - UTB/UTPA

In today’s manufacturing world, high competitive markets are pushing companies to find better ways to satisfy their customer’s needs using several Mass Customization (MC) approaches. Consequently, new Information Technologies (IT) have taken a very important role in order to manage the increasing amount of data generated from those customers. The purpose of this thesis is to develop an IT suitability index for MC that would help to identify the critical IT factors to be addressed in order to efficiently support MC. A linear programming regression model was utilized to generate index values. Finally, the results of this model could be …

An Experimental Study Of Potential Residential And Commercial Applications Of Small-Scale Hybrid Power Systems, Michael Anthony Acosta

Theses and Dissertations - UTB/UTPA

The research presented in this thesis provides an understanding of small-scale hybrid power systems. Experiments were conducted to identify potential applications of renewable energy in residential and commercial applications in the Rio Grande Valley of Texas. Solar and wind energy converted into electric energy was stored in batteries and inverted to power common household and commercial appliances. Several small to medium size hybrid power systems were setup and utilized to conduct numerous tests to study renewable energy prospects and feasibility for various applications. The experimental results obtained indicate that carefully constructed solar power systems can provide people living in isolated …

A Study On Gas Penetration And Fingering Behavior In Injection Molding Of Polymer And Powder Metal Feedstock, Edna I. Orozco

Theses and Dissertations - UTB/UTPA

The effect of processing variables on the level of gas penetration in parts fabricated by gas-assisted injection molding from two different materials was compared. The materials used were polypropylene and stainless steel powder metal/thermoplastic feedstock. Software simulation and physical experiments were conducted. Taguchi analysis was used to reduce the number of experiment trials and to find the optimum processing conditions. Four different variables were changed using nine different combinations. The processing variables are the pressure, the delay time before gas is injected, the temperature of the material injected, and the amount of the material injected. The results showed that the …

Thermodynamic, Heat Transfer Analysis And Simulation Of A Domestic Size, Double Stage, Lithium Bromide Absorption System, Carlos R. Lima

Theses and Dissertations - UTB/UTPA

The research presented in this thesis provides an investigation into the thermodynamic and heat transfer requirements for a, 3 ton, Water / Lithium-Bromide absorption system. Thermodynamics results for one stage and two stages absorption system are presented. Heat transfer principles provided a design guideline. Flat-plate, solar, water heaters and auxiliary devices using natural gas were analyzed as the main sources for energy inputs into the generator. Experimental data from the solar collector is provided under several configurations. A TRNSYS simulation of the overall absorption, cooling systems and its alternative energy means provided different scenarios where heating loads into the generator …

Numerical Simulation Of Thermo-Elasticity, Inelasticity And Rupture Inmembrane Theory, Michael Taylor

Mechanical Engineering

Two distinct two-dimensional theories for the modeling of thin elastic bodies are developed. These are demonstrated through numerical simulation of various types of membrane deformation. The work includes a continuum thermomechanics-based theory for wrinkled thin films. The theory takes into account single-layer sheets as well as composite membranes made of multiple lamina. The resulting model is applied to the study of entropic elastic elastomers as well as Mylar/aluminum composite films. The latter has direct application in the area of solar sails. Several equilibrium deformations are illustrated numerically by applying the theory of dynamic relaxation to a finite difference discretization based …