Mechanical Engineering Commons^™

Influence Of Surface Modification On Corrosion And Biocompatibility Of Titanium Alloys, Zia Ur Rahman

Theses and Dissertations - UTB/UTPA

Titanium alloys enhance the quality and longevity of human life by replacing or treating various parts of the body. However, the aggressive body fluids lead to corrosion and metal ions dissolution. These ions leach to the adjacent tissues and causes adverse reactions. Surface modifications improve corrosion resistance and biological activity. In this investigation, electropolishing, magnetoelectropolishing, titanium coating and hydroxyapatite coating were carried out on commercially pure titanium (CPTi), Ti6Al4V and Ti6Al4V-ELI (Extra Low Interstitials). These surface modifications are known to affect surface chemistry, morphology, wettability, corrosion resistance and biocompatibility of these materials. In vitro cyclic potentiodynamic polarization tests were conducted …

Nanostructured Transition Metal Oxides For Energy Storage And Conversion, Qiang Li

Theses and Dissertations - UTB/UTPA

The conventional film configuration of electrochemical electrodes hardly fulfills the high energy and efficiency requirements because heavy electroactive material deposition restricts ion diffusion path, and lowers power density and fault tolerance. In this thesis, I demonstrate that novel nanoarchitectured transition metal oxides (TMOs), e.g. MnO2, V2O5, and ZnO, and their relevant nanocomposites were designed, fabricated and assembled into devices to deliver superior electrochemical performances such as high energy and power densities, and rate capacity. These improvements could be attributed to the significant enhancement of surface area, shortened ion diffusion distances and facile penetration of electrolyte solution into open structures of …

Corrosion Assessment And Enhanced Biocompatibility Analysis Of Biodegradable Magnesium-Based Alloys, Luis Enrique Pompa

Theses and Dissertations - UTB/UTPA

Magnesium alloys have raised immense interest to many researchers because of its evolution as a new third generation material. Due to their biocompatibility, density, and mechanical properties, magnesium alloys are frequently reported as prospective biodegradable implant materials. Moreover, magnesium based alloys experience a natural phenomena to biodegrade in aqueous solutions due to its corrosive activity, which is excellent for orthopedic and cardiovascular applications. However, major concerns with such alloys are fast and non-uniform corrosion degradation. Controlling the degradation rate in the physiological environment determines the success of an implant. In this investigation, three grades of magnesium alloys: AZ31B, AZ91E and …

Manufacture And Characterization Of Silver And Copper Nanostructures Produced Via Forcespun Nylon 6 Nanofibers, Wenqian Zhao

Theses and Dissertations - UTB/UTPA

Nylon 6 nanofibers were produced using the Forcespinning® method and were deposited with silver or copper thin films using the high vacuum thermal evaporation technique for surface functionalization of nanostructures. The changes in surface composition, morphology and surface energy of native and metallic coated Nylon 6 nanofibers were examined. Their antibacterial properties of native, silver or copper coated Nylon 6 nanofibers were tested. Furthermore, the Nylon 6 nanofibers were used as templates in order to obtain silver or copper nanotubes where the polymer was removed after high temperature calcination. The metallic coated Nylon 6 nanofibers and metallic nanotubes morphology and …

A Decision Support System To Measure Product Suitability For Additive Manufacturing Processes, Cynthia De Vasconcellos Barros

Theses and Dissertations - UTB/UTPA

Additive Manufacturing (AM) technologies started arising around 1980’s and they are currently considered to be the third industrial revolution. With improvements in computers, materials, and automated machines, manufacturers across several types of industries are becoming more familiar with AM processes, and it has become more common to see products that are being fabricated by using this new technology. However, there are still questions regarding when it is suitable to use Additive Manufacturing or conventional manufacturing processes depending on different factors. The purpose of this thesis is to create a Decision Support System (DSS) that will help users measure product suitability …

Phase Field Modeling Of Shear Yielding And Crazing In Glassy Polymer, Yunzhe Mao

Open Access Theses

Glassy polymers are very important in industrial and commercial components manufacturing. For instance, it is used to manufacture polymer-matrix composites, the type of composite used in the Dreamliner 787. But this kind of material is also limited by its tendency to fail in brittle manner. In this study, we use phase field model to characterize the yielding condition of glassy amorphous polymer under a wide range of loading conditions. The main failure mechanisms in amorphous glassy polymers, such as poly-methyl-methacrylate (PMMA), are crazing and shear yielding. Crazing is formed because of the nucleation of micro-voids in the location of stress …

Particle Deposition On Superhydrophobic Surfaces By Sessile Droplet Evaporation, Mercy G. Dicuangco

Open Access Theses

Prediction and active control of the spatial distribution of particulate deposits obtained from sessile droplet evaporation is essential in ink-jet printing, nanostructure assembly, biotechnology, and other applications that require localized deposits. In recent years, sessile droplet evaporation on bio-inspired superhydrophobic surfaces has become an attractive method for depositing materials on a site-specific, localized region, but is less explored compared to evaporative deposition on hydrophilic surfaces. It is therefore of interest to understand particle deposition during droplet evaporation on superhydrophobic surfaces to enable accurate prediction and tunable control of localized deposits on such surfaces. The purpose of the present work is …

Unsteady Forces On A Spherical Particle Accelerating Or Decelerating In An Initially Stagnant Fluid, Yashas Mudlapur Phaneesh Keshav

Open Access Theses

Flows with particles play an important role in a number of engineering applications. These include trajectories of droplets in sprays in fuel-injected-reciprocating-piston and gas-turbine engines, erosion of materials due to particle impact on a surface, and deposition of materials on surfaces by impinging droplets or particles that could solidify or bond on impact. For these applications, it is important to understand the forces that act on the particles so that their trajectories could be predicted.

Considerable work has been done on understanding the forces acting on spherical particles, where the Reynolds numbers (Rep ) based on the particle …

Probabilistic Fault Detection And Diagnostics For Packaged Air-Conditioner Outdoor-Air Economizers, Andrew L. Hjortland

Open Access Theses

Poor economizer control, economizer damper failure, and excess outdoor-air contribute to these performance degradations. In order to promote optimal rooftop air-conditioner (RTU) performance and reduce operating costs, an automated fault detection and diagnostics (AFDD) tool has been designed for RTUs with integrated economizers. Based on previously proposed methods, the proposed method advances the economizer fault detection and diagnosis components by using statistical classifiers in order to provide more robust, probabilistic fault outputs. A set of air-side virtual sensors has also been added to the method in order to expand the applicable range of conditions fault detection and diagnostics can be …

Quantitative Imaging Of Radiation Intensity From A Turbulent Sooting Flame, Robert Kapaku

Open Access Theses

Quantitative imaging of radiation intensity (QIRI) is a method of investigating temporally and spatially resolved radiation from species and particulates in turbulent flames. The current study reports quantitative images of radiation intensity from a turbulent ethylene flame that matches the Reynolds number (15,200) of a non-sooting flame from the International Workshop on Measurement and Computation of Turbulent Non-premixed Flames. A calibrated high-speed infrared camera with four band-pass filters was used to acquire images of radiation intensity in wavelengths corresponding to carbon dioxide, water vapor, and soot. The luminous flame measurements show thin radiating structures corresponding to soot layers and higher …

An Algorithm For Impacting Soft Structures, Tengfei Long

Open Access Theses

Impact among soft structures is often difficult to model because of the geometrical non-linearity involved. There are a number of previous studies of the contact dynamics of rigid bodies, but few has focused on soft structures so far.

This thesis models impact between soft structures without any restraint on their geometries. The goal is to simulate the dynamics involved among soft structures during an impact process. This has been done through designing and implementing an contact algorithm that uses the finite element method along with a three-dimensional solid element to solve the fundamental time integration problem. Modeling of the contact …

Experimental And Numerical Study Of The Air Distribution In An Airliner Cabin, Wei Liu

Open Access Theses

Nowadays, more people, including those with impaired health or who are otherwise potentially sensitive to the cabin environment, are traveling by air than ever before. The flying public demands a higher comfort level and a cleaner environment because they encounter a combination of environmental factors including low humidity, low air pressure, and sometimes, exposure to air contaminants such as ozone, carbon monoxide, various organic chemicals, and biological agents. Moreover, international air travel has increased the potential risks associated with airborne disease transmission and the release, whether accidentally or intentionally, of noxious substances during flight. Many studies suggest that the risk …

Exhaust Thermal Management Using Cylinder Deactivation And Late Intake Valve Closing, Mark E. Magee

Open Access Theses

Progressively stricter emission regulations have compelled diesel engine manufacturers to develop new technologies that reduce harmful pollutants like NOx and soot. While manufacturers have previously been able to meet these regulations through the use of on engine technology such as exhaust gas recirculation and multiple pulse injections, exhaust after treatment systems such as diesel particulate filters and selective catalytic reduction systems have become necessary to meet recent stricter policies. While these after treatment systems are incredibly effective at reducing harmful emissions, to operate effectively the system needs to be above a certain temperature level typically between 250 and 300°C. Many …

Improving Indoor Air Quality Through Botanical Air Filtration In Energy Efficient Residences, Daniel William Newkirk

Open Access Theses

According to the U.S. EPA, the average American spends 90% of their time indoors where pollutants are two to five times more prevalent than outside. The consequences of these pollutants are estimated to cost the U.S. 125 billion dollars in lost health and productivity. Background literature suggests botanical air filtration may be able to solve this problem by leveraging the natural ability of plants to purify indoor air. By improving indoor air quality, energy consumption can also be reduced by bringing in less outside air to dilute contaminants within the space. A botanical air filter, called the Biowall, was designed …

A Novel Three Degree-Of-Freedoms Oscillation System Of Insect Flapping Wings, Yi Qin

Open Access Theses

We propose an oscillation system to replicate the dynamic behavior of flapping wings, inspired by insect flight muscles. In particular, we study the flight of the fruit fly Drosophila virilis . We model the wing as a rigid body with three degree-of-freedom, described by three Euler angles: the stroke angle, the rotation angle and the deviation angle. Insect flight muscles are separated into two types: power muscles and control muscles. One actuator and one torsional spring at the stroke angle act as the power muscles. Two torsional springs at the rotation angle and the deviation angle mimic the control muscles. …

Characterization Of Thermal And Mechanical Properties Of Porous Material For Electronic Cooling Applications, Ninad Tushar Trifale

Open Access Theses

Metal foams are considered beneficial for several applications because of its significantly large surface area for a given volume. Foams form a high thermal conductive network in a thermal interface for electro cooling applications. The porous structures are relatively compliant and can provide for a better contact and thereby have a lower thermal resistance. Porous heat sinks made of aluminum foam have been well studied in the past. It is not only cost effective due to the unique production process, but also attractive for the theoretical modeling study to determine the performance. A study on the thermal and mechanical characterization …

The Influence Of Gaps On The Frequency Response Of A Beamspring Contact System, Wenbin Zhang

Open Access Theses

Some mechanical systems with gaps such as in disc brakes and Cardan joints exhibit nonlinearity under certain load conditions, which is unpredictable and highly sensitive to initial conditions. Previous studies were mainly focused on either a single-degree-of-freedom (DOF) system or a flexible beam with uniform elastic foundation. The analysis of this thesis is a combination of these two where gaps are first introduced to a flexible beam model. A model of a beam resting on compliant foundation with gaps has been developed and analyzed. The assumed modes method is used to derive the equations of motion (EOM's) for the system. …

Crack Growth Behavior Under Creep-Fatigue Conditions Using Compact And Double Edge Notch Tension-Compression Specimens, Santosh B. Narasimha Chary

Graduate Theses and Dissertations

The American Society for Testing and Materials (ASTM) has recently developed a new standard for creep-fatigue crack growth testing, E 2760-10, that supports testing compact specimens, C(T), under load controlled conditions. C(T) specimens are commonly used for fatigue and creep-fatigue crack growth testing under constant-load-amplitude conditions. The use of these specimens is limited to positive load ratios. They are also limited in the amount of crack growth data that can be developed at high stress intensity values due to accumulation of plastic and/or creep strains leading to ratcheting in the specimen. Testing under displacement control can potentially address these shortcomings …

Mass Production Of Β-Silicon Carbide Nanofibers By The Novel Method Of Forcespinning, Alfonso Salinas

Theses and Dissertations - UTB/UTPA

Non-oxide Ceramics such as silicon carbide have very unique properties, for example high toughness, thermal stability, wear resistant, and thermal shock resistance these properties make these ceramic fibers excellent for high temperature applications. Here we present the development of Silicon Carbide nanofibers utilizing a Polystyrene/Polycarbomethylsilane solution as the precursor materials. The Forcespinning ® was performed under a controlled nitrogen environment to prevent fiber oxidation. Characterization was conducted using scanning electron microscopy, x-ray diffraction, and thermogravimetric analysis. The results show successful formation of high yield, long continuous bead-free nanofibers with diameters ranging from 280nm to 2 micron depending on the selected …

Thermal Analysis Of Carbon Nanofiber Reinforced Isotactic Polypropylene, Anna Alicia Hernandez

Theses and Dissertations - UTB/UTPA

Isotactic Polypropylene (IPP) is a commonly known thermoplastic that has unique properties include being light weight, high performance, impact strength, tensile strength, elongation, and high temperature properties. The use of vapor grown carbon nanofiber (VGCNF) reinforcements on polypropylene has shown to produce high specific modulus, strength, electrical and thermal properties on specimens. Thermogravimetric (TGA) investigations on the thermal degradation of isotactic polypropylene – vapor grown carbon nanofibers composites in nitrogen were reported. The mass evolution as a function of temperature is a single sigmoid for both polypropylene and polypropylene loaded with VGCNF. The inflection temperature of these sigmoids increases as …

Fault Detection And Diagnosis For Air Conditioners And Heat Pumps Based On Virtual Sensors, Woohyun Kim

Open Access Dissertations

The primary goal of this research is to develop and demonstrate an integrated, on-line performance monitoring and diagnostic system with low cost sensors for air conditioning and heat pump equipment. Automated fault detection and diagnostics (FDD) has the potential for improving energy efficiency along with reducing service costs and comfort complaints. To achieve this goal, virtual sensors with low cost measurements and simple models were developed to estimate quantities that would be expensive and or difficult to measure directly.

A virtual refrigerant charge sensor (VRC) was extended with three approaches for determining refrigerant charge for equipment having variable-speed compressors and …

Scalable Autonomous Operations Of Unmanned Assets, Sunghun Jung

Open Access Dissertations

Although there have been great theoretical advances in the region of Unmanned Aerial Vehicle (UAV) autonomy, applications of those theories into real world are still hesitated due to unexpected disturbances. Most of UAVs which are currently used are mainly, strictly speaking, Remotely Piloted Vehicles (RPA) since most works related with the flight control, sensor data analysis, and decision makings are done by human operators. To increase the degree of autonomy, many researches are focused on developing Unmanned Autonomous Aerial Vehicle (UAAV) which can takeoff, fly to the interested area by avoiding unexpected obstacles, perform various missions with decision makings, come …

Semiconductor Nanomaterial Development For Photovoltaic And Thermoelectric Applications, Liangliang Chen

Open Access Dissertations

Today's world is frequently going through fossil energy shortage and environmental consequences brought by the over-emission of greenhouse gas from burning fossil fuels. Therefore, it is urgent now more than ever to discover or develop clean and sustainable power generation approaches. Among various approaches, photovoltaics and thermoelectrics have been more and more attentive both in academia and industry. Photovoltaic power generators can significantly decrease carbon dioxide emission by directly converting sunlight into electricity, and thermoelectric power generators can increase energy use efficiency by recycling waste heat into electricity. This research seeks to gain a better understanding of the mechanism that …

Micro Solar Thermal Energy Development And Use For Mems Power Applications, Emmanuel Ogbonnaya

Doctoral Dissertations

Increasing focus on alternative energy sources has produced significant progress across a wide variety of research areas. One particular area of interest has been solar energy. The sun represents sustainable and renewable energy source capable of meeting present energy needs without compromising the ability of future generations to meet theirs. Energy from the sun can be utilized in multiple ways. Direct rise in modern power generation typically involves either photovoltaic systems or large-scale solar thermal energy installations. While large-scale solar thermal energy generation is well advanced, there has been comparatively little research on smaller scale thermal energy collection and application. …

Identification And Quantification Of Nonlinear Behavior In A Disbonded Aluminum Honeycomb Panel Using Single Degree-Of-Freedom Models, Eric Richard Dittman

Open Access Dissertations

There is not a complete understanding of how damage mechanisms in composite materials react to nondestructive testing inputs. A deeper understanding of composite damage mechanisms and their responses to external vibratory excitation is sought using nonlinear modeling of damping and stiffness characteristics related to the damage. Different types of damping and stiffness single degree-of-freedom models are presented with analysis of their behavior at specific harmonics of the primary resonance of the system. After an understanding of the approximate behaviors of the models is obtained, experimental tests on a damaged specimen are conducted. An aluminum honeycomb sandwich panel is damaged by …

A Novel Fluid Structure Interaction And Thermal Model To Predict The Cylinder Block / Valve Plate Interface Performance In Swash Plate Type Axial Piston Machines, Marco Zecchi

Open Access Dissertations

The cylinder block / valve plate interface represents one of the most critical design element in the rotating kit of axial piston machines. The thin film of lubricant between cylinder block and valve plate has to fulfill simultaneously a bearing and a sealing function under dynamic load conditions; on the other hand, it represents an important source of power losses due to viscous friction and leakage flow.

An accurate prediction of the time changing characteristics of the interface, in terms of fluid film thickness, dynamic pressure field, load carrying ability and energy dissipation is necessary to generate more efficient and …

Mechanisms Of Microstructure Formation Under The Influence Of Ultrasonic Vibrations, Milan Rakita

Open Access Dissertations

Positive effects of ultrasound on crystallization have been known for almost 90 years. Application of ultrasound has been very successful in many industries, most notably in chemistry, creating a new branch of science - sonochemistry. However, ultrasonication has not found wide commercial application in the solidification processing. The reason for that is the complexity of underlying phenomena and the lack of predicting models which correlate processing parameters with the properties of a product. The purpose of this study is to give some contribution toward better understanding of mechanisms that lead to changes in the solidifying microstructure. It has been found …

Near-Field Pressure Distributions To Enhance Sound Transmission Into Multi-Layer Materials, Andrew Martin Jessop

Open Access Dissertations

The large impedance difference between air and most solids prevents significant energy transfer from incident acoustic waves across the air-material interface. Refraction also plays a role in preventing acoustic transmission, as the wave speed difference between air and solid materials results in an increase of the resulting propagation angles, creating near-field pressure distributions in the solid material. By utilizing evanescent pressure distributions, which decay normal to the usual direction of propagation and are represented as plane waves propagating with complex angles, energy propagation through the interface can be increased in the subsonic region of wave propagation: i.e., where waves typically …

Nonlinear Dynamics Of Carbon Nanotubes Under Soft Alternating Current Actuation, Le Luo

Theses and Dissertations - UTB/UTPA

This thesis work deals with electrostatically actuated Carbon Nanotubes (CNTs) cantilevers. Four forces are acting on the CNTs cantilever, namely damping, elastic, electrostatic and van der Waals forces. The van der Waals force is significant for values of 50 nm or lower of the gap between the CNTs and the ground substrate. As both electrostatic and van der Waals forces are nonlinear, and the CNTs electrostatic actuation is given by alternating current (AC) voltage, the CNTs undergo nonlinear parametric dynamics. The Method of Multiple Scales (MMS) and Reduced Order Model (ROM) are employed to investigate the system under soft excitation …

Design And Optimization Of A Railroad Conductive Suspension Element Pad Composed Of Thermoplastic Polyurethane And Carbon Black, Ruben Suarez Jr.

Theses and Dissertations - UTB/UTPA

The AdapterPlus™ Pad, made from thermoplastic polyurethane (TPU), is used to enhance steering and prevent metal-to-metal contact between the railcar side frame and the bearing adapter. Although the AdapterPlus™ Pad acts as a pedestal liner in the suspension assembly, it must allow electric current to flow from the rail, through the bearing adapter wall to the side frame in order to activate a solenoid air valve that releases cargo gates. Currently, the pad uses copper inserts that allow current through. Because the Adapter Plus™ Pad is subject to large dynamic loads, the copper inserts permanently deform losing contact and cutting …