Mechanical Engineering Commons^™

Molecular Simulation Of Steady-State Evaporation And Condensation: Validity Of The Schrage Relationships, Zhi Liang, Thierry Biben, Pawel Keblinski

Mechanical and Aerospace Engineering Faculty Research & Creative Works

The Accuracy, or Even the Validity, of the Schrage Relationships Expressing the Rate of Evaporation and Condensation in Terms of Local Interfacial Thermodynamics Properties and the Mass Accommodation Coefficient is a Subject of Significant Discussion. in This Work, We Carry Out Molecular Dynamics (MD) Simulations of Evaporation and Condensation of Fluid Ar in a Nanochannel. by Adjusting the Temperature Difference, ΔT, between the Evaporating and Condensing Surfaces, We Control the Steady-State Evaporation and Condensation Fluxes (JMD). We Find that Across a Wide ΔT Range Studied, JMD is Always in Excellent Agreement with the Prediction from the Exact Schrage Relationships. Furthermore, …

Assessment Of Varying Model Representations In Cfd Simulations, Caitlin R. Gerdes

Electronic Theses and Dissertations

This thesis investigates the effects of varying model refinement and representation of computational fluid dynamics (CFD) simulations in two case studies. Product and process realization in engineering design requires substantial resources (time and money) in order to test novel designs for effectiveness. In recent decades, engineering has been relying more heavily on simulation-based analysis in the design process with computer models to help reduce the demands for real-life testing. The first case study analyzed in this thesis is a photobioreactor, which is used to grow microalgae for biofuel and require a balance of nutrients, light, and mixing for growth. The …

Simulation Of Magnetically Confined Inductively Coupled Plasma, Sina Javadpour

Electronic Theses and Dissertations

In this work, a new parallel coil design was presented to address the need for high density inductively coupled plasmas with enhanced properties and a more uniform and consistent distribution, suitable for large-area material processing. Fluid model simulations of 3D argon inductively coupled plasma (ICP) were performed in COMSOL for the proposed coil and a conventional single cylindrical coil with the same impedance to be used as reference, to compare and evaluate the performance of this new halftoroidal parallel coil design and study its effects on the main variables of the generated plasma. Through different comparisons of the simulations results, …

Quantification Of Re-Absorption And Re-Emission Processes To Determine Photon Recycling Efficiency In Perovskite Single Crystals, Yanjun Fang, Haotong Wei, Qingfeng Dong, Jinsong Huang

Department of Mechanical and Materials Engineering: Faculty Publications

Photon recycling, that is, iterative self-absorption and re-emission by the photoactive layer itself, has been speculated to contribute to the high open-circuit voltage in several types of high efficiency solar cells. For organic–inorganic halide perovskites that have yielded highly efficient photovoltaic devices, however, it remains unclear whether the photon recycling effect is significant enough to improve solar cell efficiency. Here we quantitatively evaluate the re-absorption and re-emission processes to determine photon recycling efficiency in hybrid perovskite with its single crystals by measuring the ratio of the re-emitted photons to the initially excited photons, which is realized by modulating their polarization …

Target Lesion Calcium Arc Influence The Performance Of Stenting, Pengfei Dong, Shengmao Lin, David L. Wilson, Hiram G. Bezerra, Linxia Gu

Department of Mechanical and Materials Engineering: Faculty Publications

Percutaneous coronary intervention (PCI) is the most common revascularization procedure, in which, fibrocalcific plaques are found in 17–35% of patients undergoing PCI [1]. Numbers will rise with population aging and prolonged statin treatment. Calcifications often lead to stent under expansion and strut malapposition, with increased risk of thrombosis and in-stent restenosis [2]. Presence of calcium strongly inhibits stent performance, a well-documented metric for outcome [3]. The goal of this work is to develop the finite element models for inspecting the influence of the calcium arc extent on the stenting outcomes, such as the stress and strain distribution within the plaque, …

Growth Mechanisms Of Multiscale, Mound-Like Surface Structures On Titanium By Femtosecond Laser Processing, Edwin Peng, Ryan Bell, Craig A. Zuhlke, Meiyu Wang, Dennis R. Alexander, George Gogos, Jeffrey E. Shield

Department of Mechanical and Materials Engineering: Faculty Publications

Femtosecond laser surface processing (FLSP) can be used to functionalize many surfaces, imparting specialized properties such as increased broadband optical absorption or superhydrophobicity/- hydrophilicity. In this study, the subsurface microstructure of a series of mound-like FLSP structures formed on commercially pure titanium using five combinations of laser fluence and cumulative pulse counts was studied. Using a dual beam Scanning Electron Microscope with a Focused Ion Beam, the subsurface microstructure for each FLSP structure type was revealed by cross-sectioning. The microstructure of the mounds formed using the lowest fluence value consists of the original Ti grains. This is evidence that preferential …

Dissipative Elastic Metamaterial With A Lowfrequency Passband, Yongquan Liu, Jianlin Yi, Zheng Li, Xianyue Su, Wenlong Li, Mehrdad Negahban

Department of Mechanical and Materials Engineering: Faculty Publications

We design and experimentally demonstrate a dissipative elastic metamaterial structure that functions as a bandpass filter with a low-frequency passband. The mechanism of dissipation in this structure is well described by a mass-spring-damper model that reveals that the imaginary part of the wavenumber is non-zero, even in the passband of dissipative metamaterials. This indicates that transmittance in this range can be low. A prototype for this viscoelastic metamaterial model is fabricated by 3D printing techniques using soft and hard acrylics as constituent materials. The transmittance of the printed metamaterial is measured and shows good agreement with theoretical predictions, demonstrating its …

Narrowband Nanocomposite Photodetector, Jinsong Huang, Fawen Guo, Liang Shen

Department of Mechanical and Materials Engineering: Faculty Publications

A photodetector includes an anode that is transparent or partially transparent to light, a cathode and an active layer disposed between the anode and the cathode. The active layer includes a nanocomposite material that has a polymer blended with nanoparticles or organic electron trapping particles. The photodetector has a low dark current when not illuminated by light and has a high conductivity when illuminated by light, in which the light passes the anode and is absorbed by the active layer. The active layer has a thickness selected such that the photodetector has a narrowband spectral response.

Role Of Copper Oxide Layer On Pool Boiling Performance With Femtosecond Laser Processed Surfaces, Corey Kruse, Edwin Peng, Craig Zuhlke, Jeff Shield, Dennis Alexander, Sidy Ndao, George Gogos

Department of Mechanical and Materials Engineering: Faculty Publications

Copper pool boiling surfaces are tested for pool boiling enhancement due to femtosecond laser surface processing (FLSP). FLSP creates self-organized micro/nanostructures on metallic surfaces and creates highly wetting and wicking surfaces with permanent surface features. In this study two series of samples were created. The first series consists of three flat FLSP copper surfaces with varying microstructures and the second series is an open microchannel configuration with laser processing over the horizontal surfaces of the microchannels. These microchannels range in height from 125 microns to 380 microns. Each of these surfaces were tested for pool boiling performance. It was found …

Modified Qigong Breathing Exercise For Reducing The Sense Of Hunger On An Empty Stomach, Alexander P. Voroshilov, Alex A. Volinsky, Zhixin Wang, Elena V. Marchenko

Mechanical Engineering Faculty Publications

Background: The aims of this study were to determine whether a modified Qigong breathing exercise can reduce the sense of hunger and identify possible mechanisms.

Methods: The results from the test group, which performed the exercise, are compared with the control group, which performed deep breathing. Intestinal pressure measurements, stomach pH monitoring, and participant surveys were used for assessment.

Results: Stomach pH was increased by 3 (0.2) and intestinal pressure was reduced by 12 (0.5) mm Hg in the experimental group and did not change significantly in the control group. The study provides strong evidence that the exercise can significantly …

Models For The Residual Life Of Railroad Bearing Grease In Laboratory And Industry Applications, Douglas Timmer, Constantine Tarawneh, Robert Jones

Manufacturing & Industrial Engineering Faculty Publications

Adequate lubrication in railroad bearings is crucial to the safe operation of these components. An investigation of the residual life of railroad bearing grease was conducted in a laboratory setting. The data was collected using a split-split-plot design of experiments. The Oxidation Induction Time (OIT), which is the time required for the remaining antioxidants in a sample of grease to be consumed in a test, is the response variable for this study. Low values of OIT indicate small remaining amounts of antioxidants in the grease and thus small remaining residual life in the grease. OIT measurements were made using differential …

Surface Ozone And Its Precursors At Summit, Greenland: Comparison Between Observations And Model Simulations, Yaoxian Huang, Shiliang Wu, Louisa J. Kramer, Detlev Helmig, Richard E. Honrath

Michigan Tech Publications, Part 1

Recent studies have shown significant challenges for atmospheric models to simulate tropospheric ozone (O3/and its precursors in the Arctic. In this study, ground-based data were combined with a global 3-D chemical transport model (GEOS-Chem) to examine the abundance and seasonal variations of O3 and its precursors at Summit, Greenland (72.34° N, 38.29° W; 3212 ma.s.l.). Model simulations for atmospheric nitrogen oxides (NOx/, peroxyacetyl nitrate (PAN), ethane (C2H6/, propane (C3H8/, carbon monoxide (CO), and O3 for the period July 2008-June 2010 were compared with observations. The model performed well in simulating certain species (such as CO and C3H8/, but some significant …

Manual Revision Process For Project-Based Laboratory Instruction, Gene Hou, Feifei Zhong, Orlando M. Ayala

Mechanical & Aerospace Engineering Faculty Publications

A four-step laboratory manual revision process was developed in this study based upon a technical writing process for supporting project-based laboratory classes. The audience and the objectives of this type of laboratory manuals are quite different from those of traditional, descriptive laboratory classes. The project-based laboratory manual has to serve as both an operational handbook and a theoretical textbook. The proposed four-step manual revision process was implemented in the fall 2016 semester in a 3-credit, senior elective class which was built upon a commercially-rated finite element analysis software package. Student surveys and evaluations showed that the revision process greatly increased …

An Integrated Curriculum For Technical Writing In Higher Education In China, Feifei Zhong, Gene Hou

Mechanical & Aerospace Engineering Faculty Publications

This study aims to develop an effective curriculum plan to improve technical writing in higher education in China. The paper first investigated the deficiency in the curriculum design in China for English technical writing by comparing the required courses offered in Southwest Jiaotong University (SWJTU) in China with those in Old Dominion University (ODU) in US. Questionnaires and interviews were then conducted among studying abroad Chinese students, visiting scholars, English as Second Language (ESL) instructors as well as engineering professors. The collected data revealed that the oversea Chinese students were struggled more with higher order concerns in writing than lower …

Study Of Stability And Thermal Conductivity Of Nanoparticles In Propylene Glycol, Sumit Mahajan

All Graduate Theses, Dissertations, and Other Capstone Projects

This thesis studied the effects of gravity induced settling, thermophoresis and Brownian motion on the thermal conductivity of the Aluminum Oxide (Al2O3) nanofluids. The base fluid was propylene glycol. The effects were studied by making three samples with volumetric percentages of 0.2 %, 2% and 3% Al2O3 in propylene glycol. Sets of 22 experiments were conducted over time to understand the behavior of settling. All samples were manually mixed each time the experiment was conducted. A Thermtest Transient Plane Source TPS 500S was used to measure the thermal conductivity. Volumetric percentages and diameters of nanoparticle were chosen so that the …

Solar Energy R & D Project: Teachers Incorporating Stem- Modules To Yield An Energy Literate Generation, Tricia Kirkland, Lindsay Snowden

ENgaging Educators in Renewable enerGY (ENERGY): Lesson Plans & Slideshows (2017-2019)

Background- Photovoltaic (PV) cells produce the largest amount of electricity when they are directly facing the sun. Solar panels that use tracking systems to position the panel to constantly face the sun have the greatest efficiency. But, these systems are expensive.

Aim- Design a dual axis tracking solar panel with microcontroller and sensors (light, humidity, temperature, and compass) that are both cost effective and efficient. Sensors will be used to determine performance depending on environmental factors.

Ethics Statement: Researchers will keep honest, clear, and accurate records when collecting all data in lab and communication of information learned.

Assessment Of Multimode Spacecraft Micropropulsion Systems, Steven P. Berg, Joshua L. Rovey

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Multimode spacecraft micro propulsion systems that include a high-Thrust chemical mode and high-specific impulse electric mode are assessed with specific reference to CubeSat-sized satellite applications. Both cold-gas butane propellant and ionic liquid chemical monopropellant modes are investigated alongside pulsed plasma, electrospray, and ion electric thruster modes. These systems are studied by varying electric propulsion usage percent and calculating the payload mass fraction and thruster burn time for missions requiring 250, 500, and 1000 m/s delta-V. Systems involving chemical monopropellants have the highest payload mass fractions for a reference mission of 500 m/s delta-V and 6U-sized CubeSat, where 1U is a …

Mechanical Property Characterization Of Discontinuous Fiber Reinforced Composites By Computer Modeling, Amrit Bhusal

Electronic Theses and Dissertations

The desire to make high strength, lightweight, less corrosive, high fatigue resistance materials in auto industries, aero industries, biomedical industries have given a chance for in-depth study of composite materials. To get the profound knowledge of composites, different experiments are conducted which often take huge resources, cost and time. Computer modeling and analysis have gained popularity in Finite Element Analysis (FEA) because it can be used to predict the mechanical property of different materials. In this thesis, FEA technique has been used to predict mechanical property of discontinuous fiber reinforced composites (FRC). If we are able to foretell the mechanical …

Assessing The Near-Wall Hemodynamics In The Left Coronary Artery Using Cfd, John Junior Asiruwa

Electronic Theses and Dissertations

The objective of this thesis is to computationally investigate the flow mechanics and the near-wall hemodynamics associated with the different take-off angles in the left coronary artery of the human heart. From this study, we will be able to evaluate if the increase in the take-off angles of the left coronary artery will significantly increases or decrease the likelihood of plaque (atherosclerosis) buildup in the left coronary artery bifurcations. This study quantifies the effects of the varying take-off angles on the branches along the left anterior descending (LAD) of the left coronary artery using computational fluid dynamics (CFD) simulations. The …

Development Of Heterogeneous Catalysts For Upgrading Biomass Pyrolysis Bio-Oils Into Advanced Biofuels, Shouyun Cheng

Electronic Theses and Dissertations

The massive consumption of fossil fuels and associated environmental issues result in an increased interest in alternative resources such as biofuels. The renewable biofuels can be upgraded from bio-oils that are derived from biomass pyrolysis. Catalytic cracking and hydrodeoxygenation (HDO) are two most promising bio-oil upgrading techniques for biofuel production. Heterogeneous catalysts are essential for upgrading bio-oil into hydrocarbon biofuel. Although some progresses have been made, the cost and effectiveness of catalysts still remain challenges. The main objective of this study was to develop efficient heterogeneous catalysts for upgrading bio-oils into advanced hydrocarbon biofuel with low costs. In catalytic cracking, …

The New Designing Of The Nano-Indentation Method To Applying On The Aisi D-2 Steel, Tangyue Wu

Wayne State University Theses

In this thesis, it is mainly to describe the new designed nano-indenataion. This kind of nano-indentation apparatus is much more inexpensive and almost has the same function to compare with the commercial one. The nano-indentation system can get the force-displacement wave, which is the way to determine the elastic and plastic properties for the particle materials. In the structure, it would describe the designing of the nano-indentation apparatus for a big partial of the thesis. This part is divided into 3 sub-part: hardware designing, software designing and data processing. The material, D2, is chosen to do the force-displacement wave, which …

Condition Assessment Of End-Of-Use Products For Remanufacturing, Jovan Morgan

Research Opportunities for Engineering Undergraduates (ROEU) Program 2016-17

The goal of the project is to use the automated 3-D laser scanner using a Capnut as a test object to detect surface defects, corrosion and calculation error through offline quality inspection. potentially reducing labor time and cost for both consumers and manufacturers.

On-Orbit Autonomous Repair: Systems Design And Project Management Of The Orbital Factory Ii Cube-Satellite, Mike Louis Everett

Open Access Theses & Dissertations

In 2016, a group of faculty, staff and students from the University of Texas at El Paso submitted a formal entry to the ULA CubeCorp competition to launch a 1U Cube Satellite into Orbit. In September of 2016, the team was awarded a launch opportunity to a prestigious GTO orbit to test and validate electrically conductive printing on within the Van Allen Radiation belts. This Dissertation is focused upon the management plan and specific decision that were implemented to accomplish this goal within a one year time frame and on a conservative budget.

In 2018 this satellite will launch aboard …

Test 2176: Kubota M7-131, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2180: Claas Axion 820, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2189: Kubota M7-151, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Tractor Test 2175: Claas Xerion 5000 Cvt, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Tractor Test 2172: John Deere 8400r E23, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S1149 Challenger 1046, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S1148 Challenger 1042, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …