Mechanical Engineering Commons^™

Nebraska Summary: S1147 Challenger 1038, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S1142 John Deere 6130r, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S1112 John Deere 6155m, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S1111 John Deere 6145m, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S1110 John Deere 6130m, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S1108 John Deere 6110m, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nebraska Summary: S1159 John Deere 6250r, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Combustion Phasing Through Combustion Ionization In A Caterpillar C7 Compression Ignition Engine, Kamal Ashraf Assaad

Wayne State University Theses

To achieve the goals of best fuel economy, peak power and low soot emissions in military engines it is necessary to control the combustion process. An in-cylinder combustion sensor is required to achieve the goals of controlling the combustion process. Over the last four decades, in-cylinder pressure transducers and ion current sensors have been available for research and development. Most of the effort has focused on the pressure transducer, however up till now a pressure transducer suitable for use in production engines has not been developed yet, because of cost and durability concerns.This work presents the analysis of experimental data …

Model Advancement And Hil Setup For Testing A P2 Phev Supervisory Controller, Sajjan Balakrishnan

Wayne State University Theses

Teams participating in Advanced Vehicle Technology Competitions such as EcoCAR3 are often bound by limited time and resources. Moreover, vehicle and component downtime due to mechanical and electrical issues reduce the time available for testing activities demanded by the Controls/Systems Modeling and Simulation teams. Therefore, the teams would benefit from identifying new approaches and being more pragmatic and productive in order to achieve satisfactory progress in the competition. This thesis summarizes the approach taken to improve the simulation accuracy of the Wayne State University EcoCAR3 team’s Pre-transmission Parallel Hybrid Electric Vehicle plant model and HIL setup. Focus is on testing …

Development Of Hybrid Supervisory Controller And Energy Management Strategy For P2 Phev, Guilin Zhu Zhu

Wayne State University Theses

The EcoCAR3 project is a four-year competition sponsored by General Motors and the U.S. Department of Energy challenging 16 universities teams to reengineer a 2016 Chevrolet Camaro to be a performance plug-in hybrid electric vehicle. A pre-transmission (P2) without clutch parallel architecture was chosen by Wayne State University EcoCAR3 team in Year 3.

The parallel PHEV architecture was modeled by using MATLAB, Simulink and Stateflow for the MIL and SIL environment which was used to test different control strategies. To efficiently distribute the power between engine and electric motor and assess component and system statuses, a hybrid supervisory controller was …

Anomalous Decay Of Nanomechanical Modes Going Through Nonlinear Resonance, Oriel Shoshani, Steven W. Shaw, Mark I. Dykman

Mechanical and Civil Engineering Faculty Publications

Because of the small size of nanomechanical systems, their vibrations become nonlinear already for small amplitudes. Many nontrivial aspects of the vibration dynamics arise from the coexistence of several nonlinearly coupled modes. We show that such coupling can lead to anomalous decay of the modes where they go through nonlinear resonance, so that their amplitude-dependent frequencies become commensurate. We demonstrate the possibility of a strongly nonmonotonic dependence of the decay rate on the amplitude if one of the modes serves as a thermal reservoir for another mode. Where the decay of both modes is slow compared to the rate of …

Research Area 2: Advanced Lightweight And Tailorable Materials, Vlsj Lab, Mechanical Engineering Department, Georgia Southern University

VLSJ Lab: Research Areas (Archived)

No abstract provided.

Research Area 4: Nondestructive Evaluation (Nde) Techniques, Vlsj Lab, Mechanical Engineering Department, Georgia Southern University

VLSJ Lab: Research Areas (Archived)

No abstract provided.

Impact Of Pretreatment Methods On Fast Pyrolysis Of Biomass, Yash Donepudi

Dissertations, Master's Theses and Master's Reports

Biomass is considered a renewable source of energy with minimum carbon foot print if managed sustainably. The majority of the worlds energy is spend on transportation, and fast pyrolysis of biomass could be a potential route for production of a sustainable liquid transportation fuel. However, there are several hurdles in the conversion process. This work addresses these hurdles by investigating the impact of several pretreatment methods on fast pyrolysis including thermal pretreatment (torrefaction), comminution/grinding, mineral reduction. The impact of important parameters like heat transfer medium, conversion temperature and particle size were also investigated.

A mild thermal pretreatment of biomass (~10-15% …

Test 2179: John Deere 7210r, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2186: Case Ih Steiger 470 Quadtrac, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Nanotextured Titanium Surfaces For Implants: Manufacturing And Packaging Aspects, Sachin Bhosle

Dissertations, Master's Theses and Master's Reports

It has been shown that nanotexturing the surface of otherwise smooth titanium orthopedic materials increases osteoblast proliferation in vitro, and the bone-implant contact area and pullout force in vivo. However, this prior work has not focused on the requirements for scale-up to industrial processes. This dissertation reports on titanium surface modifications by electrochemical anodization using a benign NH₄F electrolyte, and a hybrid electrolyte also containing AgF, rather than hazardous hydrofluoric acid used elsewhere. Nanotube fabrication of Ti6Al4V foils, rods, thermal plasma sprayed commercial implants, and laser and e-beam melted powder materials was demonstrated.

It was found …

Research Area 1: Vehicle Lightweight Design And Safety, Vlsj Lab, Mechanical Engineering Department, Georgia Southern University

VLSJ Lab: Research Areas (Archived)

No abstract provided.

Mechanical And Computational Evaluation Of Cementitious Materials With Hollow Glass Microsphere Inclusions, Zachary J. Wallace

Electronic Theses and Dissertations

The effect of volumetric replacement of cementitious materials by an inert filler known as hollow glass microspheres on elastic properties is evaluated in this study through a combined computational and experimental approach. This approach considered the variation in properties of type I Portland cement for 0, 5, 10, and 15% volume fractions of two kind of glass microspheres; one was high density with high crushing strength, and the other with a relative lower density. Using a suite of software called Virtual Cement and Concrete Testing Laboratory (VCCTL), the microstructural details were determined for 80% degree of hydration of the cement …

An Effective Methodology For Suppressing Structure-Borne Sound Radiation, Lingguang Chen

Wayne State University Dissertations

ABSTRACT

AN EFFECTIVE METHODOLOGY FOR SUPPRESSING

STRUCTURE-BORNE SOUND RADIATION

by

LINGGUANG CHEN

December 2017

Advisor: Dr. Sean F. Wu

Major: Mechanical Engineering

Degree: Doctor of Philosophy

This dissertation is primarily concerned with the development of an effective methodology for reducing structure-borne sound radiation from an arbitrarily shaped vibrating structure. There are three major aspects that separate the present methodology from all the previous ones. Firstly, it is a non-contact and non-invasive approach, which is applicable to a class of vibrating structures encountered in engineering applications. Secondly, the input data consists of a combined normal surface velocity distribution on a portion …

Turbulent Spray Combustion Modeling Using Direct Integration Of Chemistry And Flamelet Generated Manifolds, Ashraya Goyal

Wayne State University Theses

Turbulent spray combustion of n-dodecane was modeled at engine relevant conditions using various combustion models (Direct Integration of Chemistry and Flamelet Generated Manifolds) and turbulence models (Dynamic Structure Large Eddy Simulation and RNG Reynolds-Averaged Naiver-Stokes). A recently developed n-dodecane mechanism was utilized and the turbulent spray was simulated at various combustion chamber initial gas temperature and pressure conditions. Mesh with size of 31 microns was utilized to resolve small eddies around the spray. The pressure-based ignition delay, flame lift-off length, and spray and jet penetrations were studied and compared with experimental measurements. The Direct Integration of Chemistry and Flamelet Generated …

Investigation Of The Thermal Performance Of Sierpinski Carpet Fractal Fins In A Natural Convection Environment, Jennifer P. Shaffer

Honors College Theses

This experimental investigation studies the thermal performance of the first four iterations of the Sierpinski carpet pattern in a natural convection environment. This particular fractal geometry is promising in that it increases the available surface area for heat transfer while simultaneously decreasing the mass of the system. This makes it a potentially advantageous design for fins or heat sinks, especially in aerospace applications where minimizing mass of the system is essential. The thermal performance was evaluated by comparing the efficiency, effectiveness, and effectiveness per unit mass for each fractal iteration. The results indicate that efficiency decreases with each fractal iteration …

Module 2: Solar Powered Cricket Lab & Engineering Guest Speaker, Lindsay Snowden

ENgaging Educators in Renewable enerGY (ENERGY): Lesson Plans & Slideshows (2017-2019)

Students will participate in a Solar Panel Cricket lab to determine which environmental condition would allow for the solar panel to produce the most power. The three conditions are inside, inside with a flashlight, or outside in the sun. The students will complete a correlating lab worksheet. Students will also ask questions and hold discussions with the guest speaker. Students will actively participate while the guest speaker is presenting.

Power House Sustainable Energy Education, Rachael Grillo, Molly Hopper, Laura Mills

ENgaging Educators in Renewable enerGY (ENERGY): Lesson Plans & Slideshows (2017-2019)

No abstract provided.

Renewable Energy, Keith Bazemore

ENgaging Educators in Renewable enerGY (ENERGY): Lesson Plans & Slideshows (2017-2019)

Lesson Plan for Renewable Energy- Environmental Science.

Nsf Energy - Pico-Grid Smart Homes Power Management System, Aaron Specht, Shaina Neal

ENgaging Educators in Renewable enerGY (ENERGY): Lesson Plans & Slideshows (2017-2019)

No abstract provided.

Wind Energy, Bob Deckard, Jaimee Howard

ENgaging Educators in Renewable enerGY (ENERGY): Lesson Plans & Slideshows (2017-2019)

No abstract provided.

Probabilistic Analysis And Verification Framework For Adaptive Flight Control, Mario Luca Fravolini, Tansel Yucelen, Marcello Napolitano

Mechanical and Aerospace Engineering Faculty Research & Creative Works

A crucial aspect that could facilitate the applications of adaptive control systems in aerospace applications is the development of effective validation and verification procedures. Most of the existing analysis and design frameworks for adaptive controllers are based on the Lyapunov direct method. One well-known drawback of this approach is the conservatism in the estimation of the uniform ultimate boundedness region with little practical utility. To overcome this limitation, a probabilistic framework for the design of uniform ultimate boundedness regions is proposed where uncertain parameters and adaptive controls are considered as random variables. In this framework, the design is translated into …

Plume Characterization Of Electric Solid Propellant Pulsed Microthrusters, Matthew S. Glascock, Joshua L. Rovey, Shae Williams, Jason Thrasher

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Electric solid propellants are an attractive option for propulsion because they are ignited only by an applied electric current. This leads to capabilities such as on-demand throttling and reignition in chemical combustion operation, and it lends itself to application in electric propulsion. In this work, the plasma plume created by electric solid propellant pulsed micro thrusters is investigated using a nude Faraday probe, a triple Langmuir probe, and residual gas analysis. The thrusters are tested at a vacuum level of 2 x 10-5torr. Results indicate an average plume electron temperature of 1.7 eV and a density of 1011 to 1014cm-3. …

Thermal Performance Of A Double-Pipe Heat Exchanger With A Koch Snowflake Fractal Design, Anton Gomez

College of Graduate Studies: Theses & Dissertations

Double-pipe heat exchangers are the simplest type of heat exchanger and are widely utilized in industrial applications. The effectiveness of double-pipe heat exchangers can be increased by using various heat transfer enhancement techniques. Passive heat transfer enhancement methods are desirable as they do not require moving components and are easy to manufacture and maintain. The focus of this study is to implement a passive heat transfer enhancement method and to investigate how thermal performance is impacted. Specifically, the inner pipe in a heat exchanger will be modified to have a cross-section in accordance with the Koch snowflake fractal pattern. The …