Mechanical Engineering Commons^™

Technical Feasibility Of Storage On Large Dish Stirling Systems, Charles E. Andraka, K Scott Rawlinson, Nathan P. Siegel

Faculty Journal Articles

Dish-Stirling systems have been demonstrated to provide high-efficiency solar-only electrical generation, holding the world record at 31.25%. This high efficiency results in a system with a high possibility of meeting the DOE SunShot goal of $0.06/kWh. Current dish-Stirling systems do not incorporate thermal storage. For the next generation of non-intermittent and cost-competitive solar power plants, we propose a thermal energy storage system that combines latent (phase-change) energy transport and latent energy storage in order to match the isothermal input requirements of Stirling engines while also maximizing the exergetic efficiency of the entire system. This report takes an initial look at …

Turbine Blade Internal Cooling: Trailing Edge, Coolant-Passage Entry, Bend Effect And Improvement In Thermal Performance, Krishnendu Saha

LSU Doctoral Dissertations

Efficient cooling of gas turbine blade is imperative for safe operation of the gas turbine engine at high temperatures. In the present work, two converging lattice structures suitable for trailing edge applications are tested and their performance is compared with a conventional pin-fin configuration. Another constant cross section lattice structure is tested to see the cooling efficiency of lattice channels with different number of sub-channels. Converging lattice structures show higher heat transfer enhancement and comparable or higher thermal performance than traditional pin-fin cooling used in gas turbine trailing edge. The highest pressure drop incurred in a multi-pass channel is at …

Propuesta De Implementación De Energía Solar Fotovoltaica En Instalaciones Pesqueras En Venezuela, Juan Zambrano, Aleyani Zambrano, Buitrago Franklin, Nelson Fumo

Mechanical Engineering Faculty Publications and Presentations

Los sistemas de obtención de energía por medios renovables han venido creciendo de manera interesante en los últimos años debido a los altos precios de la energía y a la limitada disponibilidad del recurso, en el caso de los sistemas de energía solar fotovoltaica (FV), a nivel mundial se ha demostrado gran potencial en proyectos de electrificación rural para aplicaciones domésticas y labores agropecuarias. Venezuela por su posición geográfica privilegiada, cuenta con un gran potencial energético solar, se tiene garantizado un 85% de la incidencia solar estable durante todo el día, incluso en períodos de verano se alcanzan hasta 8 …

A Bench Top Study Of The Optimization Of Lvad Cannula Implantation To Reduce Risk Of Cerebral Embolism, William D. Clark

Electronic Theses and Dissertations

Physical bench top experiments are performed to validate and complement ongoing computational fluid dynamics (CFD) analyses of ventricular assist device (VAD) circulation. VADs are used in patients whose hearts do not function to their maximum potential due advanced stages of heart disease and, consequently, are unable to adequately supply blood to the systemic circulation. VADs are commonly utilized as a bridge-to-transplantation, meaning that they are implanted in patients while waiting for a heart transplant. In such cases of long term utilization of VADs, it has been reported in the literatures that thrombo-embolic cerebral events occur in 14-47% of patients over …

An Empirical Study On Quality Management Practices, Organization Performance And Suppliers' Selection In Southern Minnesota Manufacturing Firms, Rachel Yetunde-Abiodun Awoku

All Graduate Theses, Dissertations, and Other Capstone Projects

Quality management systems (QMS) have been widely applied successfully by many manufacturing companies to improve their process, increase profits and organizational performance. The most applied of the quality programs are ISO 9001, Total Quality Management (TQM), Just-In-time (JIT), Lean Management and Six Sigma. Although past studies on quality management have identified and studied the implementation of quality management practices, there is little or no research on quality management practices and business performance in Southern Minnesota manufacturing companies. Many researchers have concluded that the implementation of quality management practices has led to significant improvements in companies' business performance while others have …

Investigation Of A Water Desalination Method Via A Humidification-Dehumidification Process Using Hvac Technology, Juan A. Cornejo

Open Access Theses & Dissertations

Potable water is becoming a scarce resource in many arid regions of the world. An experimental unit was designed and constructed to examine and characterize the production capabilities of a humidification-dehumidification (HDH) desalination process. An HDH cycle offers a viable, technologically light, alternative for producing fresh water from brackish water because the low relative humidity air is infused with water vapor through evaporation by means of conventional heating, ventilation and air conditioning (HVAC) components. The evaporation process effectively separates salts and suspended solids from the brackish feed-water. Desalinated water is subsequently recovered by extracting the water vapor from the moist …

An Experimental Investigation On Lox/Lch4 Reaction Control Thrusters, Arturo Acosta-Zamora

Open Access Theses & Dissertations

This work describes the development and preliminary testing of a thrust measurement system, in combination with a propellant feed and automation controls systems to test the performance of 8.9 to 35.6 N (2 to 8 lbf) LOX/Methane reaction control thrusters. LOX/LCH4 has come to be the main focus of next generation "green" propellants for future space exploration. As there is limited experience with this propellant combination, an effort is being conducted to research performance of rockets using these propellants. The development of a thrust measurement, propellant feed, and automation controls systems is necessary for proper testing and qualification of thruster …

Combustion And Compaction Of Lunar Regolith/Magnesium Mixtures, Armando Delgado

Open Access Theses & Dissertations

Feasible techniques that require low energy consumption and reduced costs are of vital importance to enable humans to explore and occupy space. In-Situ Resource Utilization (ISRU) is the branch in the Human Exploration Technology that studies the production of consumables and materials using indigenous lunar and planetary resources. ISRU represents an enabling opportunity for establishing long lasting human exploration missions. Construction materials produced in-situ are of special interest because of the high payload they represent when launching them from Earth. The in-situ production of construction materials that requires low energy input would be advantageous due to the limited energy in …

On The Extraction Of Volatiles From Lunar Regolith Using Solar Power, Jorge Alberto Frias

Open Access Theses & Dissertations

Recent lunar missions have confirmed the presence of water and miscellaneous volatiles within the craters of the Moon's South Pole. If harvested, these resources have the potential to provide an incredible budget saving to the human space exploration program by dropping the total mass that astronauts need to carry from the Earth. The area that develops these technologies is called In-Situ Resource Utilization (ISRU). ISRU allows reducing the payload, and consequently reduces the energy consumption and cost of space exploration. The present thesis investigates methods for the extraction of volatiles from regolith within the shadowed craters of the Moon using …

Numerical Analysis Of Single Tank Thermocline Thermal Storage System For Concentrated Solar Power Plant, Samia Afrin

Open Access Theses & Dissertations

The overall efficiency of a Concentrating Solar Power (CSP) plant depends on the effectiveness of Thermal Energy Storage (TES) system. A Single tank TES system has potential to provide effective solution. In a single tank TES system, a thermocline region, which produces the temperature gradient between hot and cold storage fluid by density difference, is used. Preservation of this thermocline region in the tank during charging and discharging cycles depends on the uniformity of the velocity profile at any horizontal plane. One of the major challenges for the single tank thermocline is actually maintaining the thermocline region in the tank, …

Comparison Study Between Fem And Sem For Wave Propagation Models Applied To Solids, Shaddy Roberto Castillo Ponton

Open Access Theses & Dissertations

Wave propagation is a field whose application has spread across many disciplines. In the field of structural engineering, wave propagation methods have focused their attention specifically in the area of structural health monitoring and active control of vibrations and noise. Likewise, the development of new methods and their application have been successful in the area of material science with a special emphasis on the field of structural integrity evaluation of anisotropic and inhomogeneous structures (laminated composite structures). The current available analysis tools are inadequate to handle the modeling of complex structures. One-dimensional wave propagation problems in solids are still a …

Investigation Of A Water Desalination Method Via A Humidification-Dehumidification Process Using Hvac Technology, Juan Antonio Cornejo

Open Access Theses & Dissertations

Potable water is becoming a scarce resource in many arid regions of the world. An experimental unit was designed and constructed to examine and characterize the production capabilities of a humidification-dehumidification (HDH) desalination process. An HDH cycle offers a viable, technologically light, alternative for producing fresh water from brackish water because the low relative humidity air is infused with water vapor through evaporation by means of conventional heating, ventilation and air conditioning (HVAC) components. The evaporation process effectively separates salts and suspended solids from the brackish feed-water. Desalinated water is subsequently recovered by extracting the water vapor from the moist …

Development Of A Multi-Material, Multi-Technology Fdm System For Process Improvement Experimentation, David Espalin

Open Access Theses & Dissertations

Over the last three decades, developments within the area of Additive Manufacturing (AM) have resulted in novel technologies capable of producing highly customized, complex part geometries in a fraction of the lead time required by traditional manufacturing methods (e.g., injection molding, metal casting). In particular, fused deposition modeling (FDM), a material extrusion AM process, can produce parts using production-grade thermoplastics like acrylonitrile butadiene styrene, polycarbonate, and polyetherimide. Additionally, non-commercial materials (e.g., polycaprolactone, ceramic loaded polymers, carbon nanotube loaded polymers) have been processed using FDM in part to demonstrate the potential diversity in material selection.

Recently, a myriad of personal 3D …

Heat Exchanger Design And Development For Automotive Exhaust Waste Heat Recovery Using Thermoelectric Devices, Kazi S. Hassan

Open Access Theses & Dissertations

In this study several heat exchanger designs were constructed, tested, and the effect of the design on the overall efficiency and power generated by thermoelectric generators was measured. The thermoelectric elements were attached to the heat exchanger and hot gas passed through the system simulating automotive exhaust. An aluminum duct heat exchanger, a copper heat exchanger, and a heat exchanger with a twisted tape insertion were tested. The heat exchangers were all rectangular with similar dimensions and minimum thicknesses near the wall. The flow of exhaust gas was created by heated air flow ranging from 100-150 LPM. The cool side …

Electrical Characterization Of Microcrystalline Lifepo4 For Application In Lithium Ion Batteries, Sukhdeep Amarjeet Labana

Open Access Theses & Dissertations

Electrical Characterization of Microcrystalline LiFePO4 for application in lithium ion batteries. Mainly, to study about the electrical properties of Lithium Iron Phosphate as a cathode material to increase its Electrical consumption.

High-Order Central Finite-Volume Schemes For Atmospheric Modeling, Kiran Kumar Katta

Open Access Theses & Dissertations

Atmospheric numerical modeling has been going through drastic changes over the past decade, mainly to utilize the massive computing capability of the petascale systems. This obliges the modelers to develop grid systems and numerical algorithms that facilitate exceptional level of scalability on these systems. The numerical algorithms that can address these challenges should have the local properties such as the high on-processor operation count and minimum parallel communication i.e., high parallel efficiency. They should also satisfy the following properties such as inherent local and global conservation, high-order accuracy, geometric flexibility, non-oscillatory advection and positivity preservation properties. The goal of this …

Development Of A High Pressure Optically Accessible Combustor And Shear Co Axial Injector, Christopher David Navarro

Open Access Theses & Dissertations

A trend in the last decade in the field of propulsion and rocketry is leaning toward the use of the combination of Liquid Methane and Liquid Oxygen as propellant fuels. This is in contrast with the earlier trend of using Hydrogen systems and toxic hypergolic systems. The Multi-Purpose Optically Accessible Combustor (MOAC) and Shear Coaxial injectors have been developed to investigate injector design and combustion research involving Oxygen and Methane propellants. The MOAC is intended for the experimentation and research of combustion of liquid and gaseous propellants. Development of the MOAC system and versatility to use a number of injector …

Low Energy Disruption Of Lipid Containing Biomass, Joaquin Rodriguez

Open Access Theses & Dissertations

Lipid containing biomass from microalgae has received recent research interest as a renewable and sustainable feedstock for biofuel production. Algae is known to offer as much as 30 times the energy density than corn based ethanol, the current world standard for biomass based liquid transportation fuels. The development of large scale systems and methods of extracting lipids from microalgae is still in the early stages of development and significant increases in efficiency and reduction in costs are necessary to substantiate algae as a feasible alternative source of fuel. Traditional conversion of algae feedstock into a refineable feedstock for biofuel can …

Oxidation Of Borides And Carbides With Y2o3 And Ta Additions, Salvador Manuel Rodriguez

Open Access Theses & Dissertations

The study presented here describes an investigation of an oxidation scale of a fully-sintered Y2O3-ZrB2-TiC composite exposed in air at 1173K. Upon oxidation of the boride/carbide, a ZrO2-TiO2 was expected to form similar to the ZrO2-SiO2 dual scale of an oxidized ZrB2-SiC. The 47wt% Y2O3-38wt%ZrB2-16wt%TiC composite formed a dual scale consisting primarily of an Y2O3-ZrO2-TiC inner scale with an outer scale of ZrO2-TiO2-Y2O3.

The samples oxidized with a parabolic layer growth allowing the calculation of the effective diffusion coefficient indicating that the oxidation was controlled by oxygen ingress through primarily the ZrO2-Y2O3 phase. The oxygen potential between the inner layer …

Investigation On A Gas-Solid Fluidized Bed Hydrodynamics Using A Non-Intrusive Technology To Visualize Flow Field, Md Rashedul Hasan Sarker

Open Access Theses & Dissertations

The biggest challenge for 21st century is to fulfill global energy demand and at the same time reduce detrimental impact on environment. Gasification technology can meet the requirement and also reduce emission without compromising its performance. In coal gasification, instead of burning coal completely a partial combustion takes place with presence of steam and limited amount of oxygen. In this controlled environment a chemical reaction takes place and produces a mixture of clean synthetic gas. Gas-solid fluidized bed is one type of gasification technology. During gasification mixing behavior of solid (coal) and gas and their flow pattern very complicated to …

Control Of A Robotic Prototype Multi-Axis Synergistic System, Julio A. Torres

Open Access Theses & Dissertations

Balance is an ability that every person has and uses in normal daily life, to walk, run, stand, dance, etc. However, there are people who suffer a kind of balance impairment. The Computerized Dynamic Posturography (CDP) is technique in balance rehabilitation, where the patient is asked to stand on a moving platform that is equipped with sensors that measure how well you maintain your balance. In this thesis, a new CDP mechatronic system, the Multi-Axis Synergistic System (MASS), for balance assessment is being developed.

As a first stage and as the objective of this research work the transferable control algorithm …

Large-Eddy Simulation Of Axially-Rotating, Turbulent Pipe And Particle-Laden Swirling Jet Flows, Nicolas D. Castro

Mechanical & Aerospace Engineering Theses & Dissertations

The flows of fully-developed turbulent rotating pipe and particle-laden swirling jet emitted from the pipe into open quiescent atmosphere are investigated numerically using Large-Eddy Simulation (LES). Simulations are performed at various rotation rates and Reynolds numbers, based on bulk velocity and pipe diameter, of 5.3x103, 12x103, and 24x103, respectively. Time-averaged LES results are compared with experimental and simulation data from previous studies. Pipe flow results confirm observations in previous studies, such as the deformation of the turbulent mean axial velocity profile towards the laminar Poiseuille-profile, with increased rotation. The Reynolds stress anisotropy tensor shows a redistribution due to pipe rotation. …

Section 7: Design & Manufacturing, Asme Ectc Coordinating Committee

Early Career Technical Journal (ECTJ)

Proceedings of the ASME Early Career Technical Conference, November 4-5, 2011. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia

pp. 251-276

Open-Architecture Composite Tube Design And Manufacture, David Branscomb, Austin Gurley, David Beal, Royall Broughton

Early Career Technical Journal (ECTJ)

Proceedings of the ASME Early Career Technical Conference, November 4-5, 2011. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, Georgia

Section 7: Design & Manufacturing; pp. 270-276

Computational Investigation Of A Hinge-Connected Hovering Plate, Zachary Robert Gaston

Browse all Theses and Dissertations

A simplified conceptual flapping wing MAV design, capable of hover, is formed from the works of both biologists and engineers, studying the behavior of flying insects and the aerodynamics of flapping flight. With this new model, hovering hinged plates are used to study the effects of passive deflection on aerodynamic performance using two-dimensional Direct Numerical Simulations (DNS) at low Reynolds numbers (Re). The hinge is modeled as a torsional spring at the leading edge, where prescribed motion is applied. The influence of forced-to-natural frequency ratio (hinge stiffness) and stroke-to-chord ratio (leading edge kinematics) are studied, to explore the effects that …

Evaluating Net-Zero Energy Houses From The U.S. Department Of Energy Solar Decathlon 2011, Jordan P. Wallpe, William J. Hutzel, Gregory Lasker, Clark Cory

School of Engineering Technology Faculty Publications

The Solar Decathlon is a two year, international project where university students compete to design, build, and test energy-efficient, net-zero homes. By definition, net-zero energy houses annually produce as much electricity as they consume. The 2011 Solar Decathlon, held in Washington D.C., had 19 university teams from around the world.

Unfortunately, many past Solar Decathlon houses have traditionally been very costly. However, the 2011 Solar Decathlon was the first competition to have an affordability contest. The affordability contest required each home to be valued under an estimated builder’s cost of $250,000, forcing the teams to select economically feasible solutions for …

Resolving Structure And Mechanical Properties At The Nanoscale Of Viruses With Frequency Modulation Atomic Force Microscopy, David Martinez-Martin, Carolina Carrasco, Mercedes Hernando-Pérez, P. J. De Pablo, Júlio Gómez-Herrero, Rebeca Pérez, Mauricio Garcia Mateu, José López Carrascosa, Daniel Roy Kiracofe, John C. Melcher, Arvind Raman

School of Mechanical Engineering Faculty Publications

Structural Biology (SB) techniques are particularly successful in solving virus structures. Taking advantage of the symmetries, a heavy averaging on the data of a large number of specimens, results in an accurate determination of the structure of the sample. However, these techniques do not provide true single molecule information of viruses in physiological conditions. To answer many fundamental questions about the quickly expanding physical virology it is important to develop techniques with the capability to reach nanometer scale resolution on both structure and physical properties of individual molecules in physiological conditions. Atomic force microscopy (AFM) fulfills these requirements providing images …

Intricate Dynamics And Hydrodynamic Frictional Losses Of The Piston-Ring Assembly In Internal Combustion Engines, Mohannad Hakeem

Wayne State University Dissertations

Frictional losses in internal combustion engines approximately account for 10% of the expended fuel energy. Moreover, forty percent of these losses are attributed to the reciprocating motion of the piston-assembly. Besides the adverse effect of friction on fuel economy, the intricate dynamics of the piston-assembly tend to significantly influence the thermal efficiency through blow-by, the engine durability through wear, and the engine noise through piston-slap. Moreover, 40 to 80% of the lubricant oil consumption has been attributed to the ring-pack dynamics.

In this dissertation, a reliable tool has been developed using MATLAB/SIMULINK and embedded C-S Functions that predicts the intricate …

Spray Characterization Of Flex-Fuel Gasoline Di Injectors And Spray Interaction With Charge Motion In A Variable Valve Actuation Engine, Atsushi Matsumoto

Wayne State University Dissertations

The objective of this study is to understand the characteristics of GDI sprays and behavior of in-cylinder charge motion in a GDI engine which is equipped with variable valve actuation. High speed spray visualization in a spray chamber was conducted for a study of spray development. By Schlieren visualization technique, the effect of different conditions including ambient conditions (temperature, pressure) and injection conditions (fuel type, fuel temperature, nozzle design) on spray formation was discussed in both qualitative and quantitative methods. High-speed visualization of the in-cylinder charge motion was carried out as well using an optical accessible engine. The testing was …

Linear And Non-Linear Deformations Of A Wind Turbine Blade Considering Warping And All Aeroelastic Load Couplings, Fouad Mohammad Mohammad

Wayne State University Dissertations

The structural dynamics behavior of the blade of a horizontal axis wind turbine that reacts to the different components of the aerodynamic loading were studied by many researchers using different approaches and assumptions. In the present research, the author considered all the extensional, torsional and flexural loadings acting on the blade with their couplings, variable airfoil cross sections with warping effects, shear deflection, rotary inertia and with or without blade's pretwist for both the linear small deformation case and the nonlinear large deformation case. To the best knowledge of the author the simultaneous inclusion of all these factors has not …