Mechanical Engineering Commons^™

Transient Growth And Instability Control Using Iteration-Varying Filter Ilc In Flexible Dual Flywheel System, Tong Mu

Masters Theses

"In the field of precision motion control, many industrial systems have flexible modes. This is especially true for very high performance nanopositioning systems where traditional bearing systems are replaced with flexible structures in order to eliminate sliding friction. The precision motion control is difficult in flexible systems because the rapid phase transition around the resonant frequency must be accurately modeled in order to actively control the resonant motion. In order to experimentally study the effectiveness of various control algorithms on flexible systems, a dual-flywheel flexible system is constructed. The mechatronics system design strategy is presented in this thesis. The control …

Development Of A Technique For Testing Of Tensile Properties With Miniature Size Specimens For Metal Additive Manufacturing, Sujitkumar Dongare

Masters Theses

"The study of mechanical properties of metals provides a basis to decide on the capability of a particular metal for a task and also to make predictions about its life. The concepts of stress, strain and strength of materials are employed in practically every engineering discipline. Mechanical properties such as stiffness, yield strength, tensile strength, ductility, toughness, impact resistance, creep resistance, fatigue resistance and others, influence the design, fabrication and service life of equipment. Therefore, more than one property is considered for the material selection process for an application. For complete understanding of any material and its feasibility for a …

Pulmonary Fluid Dynamics And Aerosol Drug Delivery In The Upper Tracheobronchial Airways Under Mechanical Ventilation Conditions, Timothy Andrew Van Rhein

Masters Theses

"The effects of mechanical ventilation conditions on fluid flow and particle deposition were studied in a computer model of the human airways. The frequency with which aerosolized drugs are delivered to mechanically ventilated patients demonstrates the importance of understanding the effects that ventilation parameters have on particle deposition in the human airways. Past studies that modeled particle deposition in silico frequently used an idealized geometry with steady inlet conditions. With recent advancements in computational power and medical imaging capabilities, studies have begun to use more realistic geometries or unsteady inlet conditions that model normal breathing. This study focuses specifically on …

Integration Of Multiple Vision Systems And Toolbox Development, Rohit Vijay Bapat

Masters Theses

"Depending on the required coverage, multiple cameras with different fields of view, positions and orientations can be employed to form a motion tracking system. Correctly and efficiently designing and setting up a multi-camera vision system presents a technical challenge. This thesis describes the development and application of a toolbox that can help the user to design a multi-camera vision system. Using the parameters of cameras, including their positions and orientations, the toolbox can calculate the volume covered by the system and generate its visualization for a given tracking area. The cameras can be repositioned and reoriented using toolbox to generate …

Enhancing The Aerodynamic Performance Of Stepped Airfoils, Ranganadhan Voona

Masters Theses

"The main objective of this research was to investigate the lift and drag characteristics of a stepped airfoil with backward facing steps; apply active flow control technique to enhance the aerodynamic performance of stepped airfoils and examine the possibility of using such airfoils on Unmanned Aerial Vehicles (UAV's). A step was introduced at mid-chord, with a depth of 50% of the airfoil thickness at mid-chord position extending till the trailing edge of a NACA 4415 airfoil. Computational studies were conducted with the use of passive flow control constituting the activation of step and active flow control with the use of …

Thermal Modeling And Analysis Of Polymer Electrolyte Membrane Open Cathode Fuel Cells, Blanca Ollero Loranca

Masters Theses

"In the past decade renewable energies have increasingly become a commodity in everyday life. Because of their high power densities and their application versatility, fuel cells have stood out among other sources of renewable energy. In order to improve this technology as the needs for it increases, thermal modeling is an essential step. Researchers in the past have investigated the effect that temperature has on fuel cells. However, not much work has been done on the thermal dynamics of these devices and no one, to the authors knowledge, has studied the speed of response in thermal changes as a function …

Control Oriented Thermal Modeling Of Lithium Ion Batteries, Derek Brown

Masters Theses

"Lithium ion batteries have been widely used in consumer electronics and are beginning to move to the forefront of the automotive and power grid industries. Lithium ion batteries are desirable in these applications because they are high energy density and high specific energy cells, while remaining inexpensive and lightweight. Safety is a concern in every consumer application; therefore, in order for lithium ion battery use to continue growing, advances in battery management systems are needed. Thermal management of lithium ion batteries is currently a critical issue. Applications are becoming more dependent on active liquid thermal management systems. The development of …

Fabrication Of Complex Ceramic Parts With Sacrificial Material Using Freeze-Form Extrusion Fabrication, Diego Armando Garcia MontañO

Masters Theses

"An additive manufacturing process called Freeze-form Extrusion Fabrication (FEF) was developed in this study to fabricate complex ceramic parts that require the use of sacrificial materials. The aqueous paste of alumina (Al₂O₃) was used as the main material, with solids loadings as high as 50 vol. % and water as the main liquid medium. Methyl cellulose, with a 10 vol. % solids loading and 90 vol. % water content, was used as the sacrificial material. The freeze-form extrusion machine has multiple extruders (extrusion devices) capable of fabricating parts from multiple materials without mixing them. The dynamic process of extruding alumina …

Generic Kinematic Simulation For Verification Of Laser Deposition Tool Paths, Sweta Dhaveji Chakravadhanula

Masters Theses

"The development of 3D visual simulation tool for machine simulation is a key approach in saving time and reducing cost. It is an important step before a manufacturing operation is performed on a part, as a tool to detect collision and validate the operation results. There are several kinds of manufacturing equipment being used and hence there is a need for the development of a generalized method to visually simulate a variety of machines. This paper presents the research conducted on describing machine configuration in a generic format which not only gives useful information, but can also be used as …

5-Axis Tool Path Generation With Collision Detection For Finish Machining Of Freeform Surfaces, Jomy Francis

Masters Theses

"Research in the field of Tool path generation for freeform surfaces has been done intensively in the past. However, the main challenge that still exists is the computational efficiency related to the tool path generation. Tool path generation for freeform surface involves instantaneous calculation of new tool orientations which does not collide with the neighboring surfaces. Since the collision check of tool and neighboring surface is done repetitively at every instant of the tool, the calculations at every instant are to be computationally as easy as possible.

This thesis is composed of one paper. Paper I presents a novel extension …

Ultrasonic Communications System For Health Monitoring Of Hydrokinetic Turbine Blades, Andrew James Heckman

Masters Theses

"A health monitoring approach is investigated for hydrokinetic turbine blade applications. In-service monitoring is critical due to the difficult environment for blade inspection and the cost of inspection downtime. Composite blade designs provide a medium for embedding sensors into the blades for in-situ health monitoring. The major challenge with in-situ health monitoring is transmission of sensor signals from the remote rotating reference frame of the blade to the system monitoring station. In the presented work, a novel system for relaying in-situ blade health measurements in hydrokinetic systems is described and demonstrated. An ultrasonic communication system is used to transmit health …

A Planning Tool To Predict The Welding Angle In Laser Metal Deposition, Sriram Prabhu

Masters Theses

"Research in Laser Metal Deposition (LMD) has been done rigorously in the past. However, the main challenge that still exists is the production of complex part geometries having overhang features. Production of such features requires individual tracks with a high aspect ratio and wider bead angle. The use of destructible/ non-destructible support structures involves costly post production operations which increase production cost. Tilting or moving the deposition surface can be useful to create overhangs but are applicable only to special cases. Since such techniques have to be used by the manufacturing community, the techniques need to be simple in calculation …

A Three-Dimensional Transient Simulation Of An Electrochemical Magnetohydrodynamics Cell With Micro And Millielectrode: A Unified Reconciliation Of Theory And Experiment, Cajon Gonzales

Masters Theses

"Even though electrochemically induced magnetohydrodynamic (MHD) convection is a straightforward inexpensive method for moving fluids in confined spaces as for example during electrodeposition, stripping voltammetry, or in microfluidics, efficient quantitative models only recently have begun to appear. This is traced to complex mathematics that have prevented development of analytical expressions, e.g., for mass-transfer limited currents in analogy to the well-known Levich equation for the rotating electrode. Thus, related literature expressions remain mainly phenomenological concerning particular cell geometries or applications. Here, using such reports as points of departure, we validate a computationally rigorous description of the magnetoelectrochemical problem and define the …

Prototyping And Testing Of Solar Hybrid Pv-T Panels, Joel Aaron Lamson

Masters Theses

"The combination of photovoltaic and solar thermal (PV-t) systems has been proven to provide greater efficiency than their stand-alone counterparts. Previous studies on hybrid assemblies have found favorable results supporting the combination of both systems. The research presented here builds on the work competed here at Missouri University of Science and Technology (Missouri S&T) yielding favorable results of increased efficiencies as compared to stand-alone systems. The main difference between this experiment and previous research at Missouri S&T is that the hybrid PV-t is unglazed. The effect of an unglazed panel is shown to reduce the thermal output of the PV-t …

Microlens Array Light Trapping In Cdte/Cds Solar Cells, Patrick Michael Margavio

Masters Theses

"In light of the continued rise in fossil fuel costs, alternative energy sources, such as solar technology, are increasingly important. Concentrating photovoltaic systems are promising for future efficient and cost effective competition with fossil fuels. A microlens array is employed to a CdTe/CdS semiconducting solar cell to increase efficiency via light trapping. Since the microlens array will cause a local increase in incident light intensity, it should cause a corresponding increase in efficiency. The solar cell is deposited layer by layer. The CdS layer is chemically deposited. The CdTe layer is deposited using a novel additive manufacture technique: laser melting …

Structural Response And Dynamics Of Fluid-Structure-Control Interaction In Wind Turbine Blades, Lucan Ignacio Lago

Dissertations, Master's Theses and Master's Reports - Open

Reducing the uncertainties related to blade dynamics by the improvement of the quality of numerical simulations of the fluid structure interaction process is a key for a breakthrough in wind-turbine technology. A fundamental step in that direction is the implementation of aeroelastic models capable of capturing the complex features of innovative prototype blades, so they can be tested at realistic full-scale conditions with a reasonable computational cost.

We make use of a code based on a combination of two advanced numerical models implemented in a parallel HPC supercomputer platform: First, a model of the structural response of heterogeneous composite blades, …

Development Of One-Dimensional And Two-Dimensional Computational Tools That Simulate Steady Internal Condensing Flows In Terrestrial And Zero-Gravity Environments, Soumya Asimkumar Mitra

Dissertations, Master's Theses and Master's Reports - Open

This dissertation presents an effective quasi one-dimensional (1-D) computational simulation tool and a full two-dimensional (2-D) computational simulation methodology for steady annular/stratified internal condensing flows of pure vapor. These simulation tools are used to investigate internal condensing flows in both gravity as well as shear driven environments. Through accurate numerical simulations of the full two dimensional governing equations, results for laminar/laminar condensing flows inside mm-scale ducts are presented. The methodology has been developed using MATLAB/COMSOL platform and is currently capable of simulating film-wise condensation for steady (and unsteady flows). Moreover, a novel 1-D solution technique, capable of simulating condensing flows …

Computational Fluids Domain Reduction To A Simplified Fluid Network, Robert E. Smith

Dissertations, Master's Theses and Master's Reports - Open

The primary goal of this project is to demonstrate the practical use of data mining algorithms to cluster a solved steady-state computational fluids simulation (CFD) flow domain into a simplified lumped-parameter network. A commercial-quality code, “cfdMine” was created using a volume-weighted k-means clustering that that can accomplish the clustering of a 20 million cell CFD domain on a single CPU in several hours or less. Additionally agglomeration and k-means Mahalanobis were added as optional post-processing steps to further enhance the separation of the clusters. The resultant nodal network is considered a reduced-order model and can be solved transiently at a …

Mechanical Modeling Of Intraneural Ganglion Cyst, Puneet Soman

Dissertations, Master's Theses and Master's Reports - Open

Intraneural Ganglion Cyst is a 200 year old mystery related to nerve injury which is yet to be solved. Current treatments for the above problem are relatively simple procedures related to removal of cystic contents from the nerve. However, these treatments may result into neuropathic pain and recurrence of the cyst. The articular theory proposed by Spinner et al., (Spinner et al. 2003) takes into consideration the neurological deficit in Common Peroneal Nerve (CPN) branch of the sciatic nerve and affirms that in addition to the above treatments, ligation of articular branch results into foolproof eradication of the deficit. Mechanical …

Torque Converter Turbine Noise And Cavitation Noise Over Varying Speed Ratio, Chad Michael Walber

Dissertations, Master's Theses and Master's Reports - Open

These investigations will discuss the operational noise caused by automotive torque converters during speed ratio operation. Two specific cases of torque converter noise will be studied; cavitation, and a monotonic turbine induced noise. Cavitation occurs at or near stall, or zero turbine speed. The bubbles produced due to the extreme torques at low speed ratio operation, upon collapse, may cause a broadband noise that is unwanted by those who are occupying the vehicle as other portions of the vehicle drive train improve acoustically. Turbine induced noise, which occurs at high engine torque at around 0.5 speed ratio, is a narrow-band …

Laser Thomson Scattering Measurements Of Electron Temperature And Density In A Hall-Effect Plasma, Robert L. Washeleski

Dissertations, Master's Theses and Master's Reports - Open

Hall-effect thrusters (HETs) are compact electric propulsion devices with high specific impulse used for a variety of space propulsion applications. HET technology is well developed but the electron properties in the discharge are not completely understood, mainly due to the difficulty involved in performing accurate measurements in the discharge. Measurements of electron temperature and density have been performed using electrostatic probes, but presence of the probes can significantly disrupt thruster operation, and thus alter the electron temperature and density. While fast-probe studies have expanded understanding of HET discharges, a non-invasive method of measuring the electron temperature and density in the …

Impact Of E22 On Two-Stroke And Four-Stroke Snowmobiles, James Corey Weber

Dissertations, Master's Theses and Master's Reports - Open

A push to reduce dependency on foreign energy and increase the use of renewable energy has many gas stations pumping ethanol blended fuels. Recreational engines typically have less complex fuel management systems than that of the automotive sector. This prevents the engine from being able to adapt to different ethanol concentrations. Using ethanol blended fuels in recreational engines raises several consumer concerns. Engine performance and emissions are both affected by ethanol blended fuels.

This research focused on assessing the impact of E22 on two-stroke and four-stroke snowmobiles. Three snowmobiles were used for this study. A 2009 Arctic Cat Z1 Turbo …

Assessments And Computational Simulations In Support Of A Time-Varying Mass Flow Rate Measurement Technique For Pulsatile Gas Flow, Andrew Rice

Dissertations, Master's Theses and Master's Reports - Open

This thesis covers the correction, and verification, development, and implementation of a computational fluid dynamics (CFD) model for an orifice plate meter. Past results were corrected and further expanded on with compressibility effects of acoustic waves being taken into account. One dynamic pressure difference transducer measures the time-varying differential pressure across the orifice meter. A dynamic absolute pressure measurement is also taken at the inlet of the orifice meter, along with a suitable temperature measurement of the mean flow gas. Together these three measurements allow for an incompressible CFD simulation (using a well-tested and robust model) for the cross-section independent …

Exhaust Emissions Of Low Level Blend Alcohol Fuels From Two-Stroke And Four-Stroke Marine Engines, James Michael Sevik

Dissertations, Master's Theses and Master's Reports - Open

The U.S. Renewable Fuel Standard mandates that by 2022, 36 billion gallons of renewable fuels must be produced on a yearly basis. Ethanol production is capped at 15 billion gallons, meaning 21 billion gallons must come from different alternative fuel sources. A viable alternative to reach the remainder of this mandate is iso-butanol. Unlike ethanol, iso-butanol does not phase separate when mixed with water, meaning it can be transported using traditional pipeline methods. Iso-butanol also has a lower oxygen content by mass, meaning it can displace more petroleum while maintaining the same oxygen concentration in the fuel blend.

This research …

Translation Studies On An Annular Field Reversed Configuration Device For Space Propulsion, Carrie Suzanne Hill

Dissertations, Master's Theses and Master's Reports - Open

This research investigated annular field reversed configuration (AFRC)devices for high power electric propulsion by demonstrating the acceleration of these plasmoids using an experimental prototype and measuring the plasmoid's velocity, impulse, and energy efficiency.

The AFRC plasmoid translation experiment was design and constructed with the aid of a dynamic circuit model. Two versions of the experiment were built, using underdamped RLC circuits at 10 kHz and 20 kHz. Input energies were varied from 100 J/pulse to 1000 J/pulse for the 10 kHz bank and 100 J/pulse for the 20 kHz bank. The plasmoids were formed in static gas fill of …

Analysis Of A Novel Waste Heat Recovery Mechanism For An I.C. Engine, Jasdeep S. Condle

Dissertations, Master's Theses and Master's Reports - Open

Typical internal combustion engines lose about 75% of the fuel energy through the engine coolant, exhaust and surface radiation. Most of the heat generated comes from converting the chemical energy in the fuel to mechanical energy and in turn thermal energy is produced. In general, the thermal energy is unutilized and thus wasted. This report describes the analysis of a novel waste heat recovery (WHR) system that operates on a Rankine cycle. This novel WHR system consists of a second piston within the existing piston to reduce losses associated with compression and exhaust strokes in a four-cycle engine. The wasted …

Performance And Emissions Testing Of A Small Two Stroke Engine Using Mid-Level Ethanol Blends, Ananth Padmanabha Rao Vemuri

Dissertations, Master's Theses and Master's Reports - Open

With the introduction of the mid-level ethanol blend gasoline fuel for commercial sale, the compatibility of different off-road engines is needed. This report details the test study of using one mid-level ethanol fuel in a two stroke hand held gasoline engine used to power line trimmers. The study sponsored by E3 is to test the effectiveness of an aftermarket spark plug from E3 Spark Plug when using a mid-level ethanol blend gasoline. A 15% ethanol by volume (E15) is the test mid-level ethanol used and the 10% ethanol by volume (E10) was used as the baseline fuel.

The testing comprises …

Nebraska Summary: S856 New Holland T6 140, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Test 2049: Case Ih Steiger 600 Quadtrac, Nebraska Tractor Test Lab

Nebraska Tractor Tests

ABOUT THE TEST REPORT AND USE OF THE DATA The test data contained in this report are a tabulation of the results of a series of tests. Due to the restricted format of these pages, only a limited amount of data and not all of the tractor specifications are included. The full OECD report contains usually about 30 pages of data and specifications. The test data were obtained for each tractor under similar conditions and therefore, provide a means of comparison of performance based on a limited set of reported data. EXPLANATION OF THE TEST PROCEDURES Purpose The purpose of …

Heat Transfer Enhancement In A Straight Channel Via A Rotationally Oscillating Adiabatic Cylinder, Ali Beskok, Mehrdad Raisee, Bayram Celik, Bedri Yagiz, Mohsen Cheraghi

Mechanical & Aerospace Engineering Faculty Publications

Heat convection from the uniformly heated walls of a straight channel in presence of a rotationally oscillating cylinder (ROC) is simulated at Re = 100. Heat transfer enhancement due to vortex shedding from the ROC is investigated. Systematic studies are performed to explore the rotation angle and frequency influences on heat transfer by varying the latter in range of the lock-in regime and the former from 0 to 2 π/3. All simulation results are based on the numerical solutions of two-dimensional, unsteady, incompressible Navier-Stokes and energy equations using an h/p type finite element algorithm. Considering time periodicity of the resulting …