Mechanical Engineering Commons^™

Fatigue Life Analysis Of T-38 Aileron Lever Using A Continuum Damage Approach, James D. Gyllenskog

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

In a recent investigation conducted by the United States Air Force, the mechanical failure of the aileron lever, manufactured from 2014-T6 aluminum, caused the fatal mishap of a T-38 trainer aircraft. In general the locations of cracks are unknown and must be determined by simulation. In this study we propose to use a continuum damage modeling approach to determine the degradation and damage in a material as the number of cycles of loading increases. This approach successfully predicts the location of crack initiation, propagation path, and propagation rate. A stress-based model in conjunction with the successive initiation technique is utilized. …

Support Materials Development And Integration For Ultrasonic Consolidation, Matthew L. Swank

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Support materials play a vital role across the entire field of additive manufacturing (AM) technologies. They are essential to provide the ability to create complex structures and features using AM. Successful implementation of support materials in ultrasonic consolidation (UC) will provide a vast opportunity for improvement of geometric complexity. Experimentation was performed to evaluate suitable support materials and their effectiveness within UC. Additionally a fused deposition modeling (FDM) system was integrated into the UC build environment to create an automated support deposition system. Finally several unique structures were built using support materials to demonstrate the improved geometric capability and to …

Guidance And Navigation Linear Covariance Analysis For Lunar Powered Descent, Travis J. Moesser

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

A linear covariance analysis is conducted to assess closed-loop guidance, navigation, and control system (GN&C) performance of the Altair vehicle during lunar powered descent. Guidance algorithms designed for lunar landing are presented and incorporated into the closed-loop covariance equations. Navigation-based event triggering is also included in the covariance formulation to trigger maneuvers and control dispersions. Several navigation and guidance trade studies are presented demonstrating the influence of triggering and guidance and study parameters on the vehicle GN&C performance.

In-Pile Thermal Conductivity Measurement Methods For Nuclear Fuels, Brandon S. Fox

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Measuring nuclear fuel thermal conductivity in-pile can provide much needed data for understanding fuel performance during irradiation and yield thermophysical property data needed for simulation codes and fuel databases. The objective of this research is to develop and compare two in-pile thermal conductivity methods in a laboratory setting using surrogate fuel materials.

A steady-state radial heat flow method was investigated to understand its viability as an in-pile steady-state thermal conductivity technique. By using Joule heating to simulate volumetric heat generation within a surrogate fuel rod, thermal conductivity was measured with two thermocouples at different radial positions within the rod. Examinations …

Mathematical Modeling Of Light Utilization And The Effects Of Temperature Cycles On Productivity In A Steady-State Algal Photobioreactor, Peter Edwin Zemke

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The work presented here investigated two methods of improving productivity in microalgal photobioreactors: applying temperature cycles intended to maximize photosynthesis and minimize respiration, and development of a mathematical model that predicts improvements in photon utilization using temporal light dilution (flashing).

The experiments conducted on diurnal temperature cycles with Dunaliella tertiolecta in 30-L outdoor photobioreactors showed that a properly chosen temperature cycle can improve mass and energy productivity by 18% over an identical photobioreactor with a constant temperature. However, excessively large temperature cycle amplitudes reduced productivity. A 4-7% increase in energy content was observed in microalgae exposed to temperature cycles. The …

A Study On Stainless Steel 316l Annealed Ultrasonic Consolidation And Linear Welding Density Estimation, Raelvim Gonzalez

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Ultrasonic Consolidation of stainless steel structures is being investigated for potential applications. This study investigates the suitability of Stainless Steel 316L annealed (SS316L annealed) as a building material for Ultrasonic Consolidation (UC), including research on Linear Welding Density (LWD) estimation on micrographs of samples. Experiment results are presented that include the effect of UC process parameters on SS316L annealed UC, optimum levels of these parameters, and bond quality of ultrasonically consolidated SS316L annealed structures in terms of LWD. In support to these efforts, a Measurement System Analysis for LWD assessment has been performed, and a new instrument for LWD measurement …

Effects Of Temperature And Humidity On Glass-Reinforced Nylon Rotating Bands, Marc D. Raby

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Certain 30mm munitions used in various military applications are configured with a glass-reinforced nylon band that acts as a firing ring or rotating band. The purpose of this research is to investigate whether storage environments compromise the strength and integrity of the glass-reinforced nylon rotating bands by researching the environmental factors that will degrade nylon and by performing tests to investigate if these factors will embrittle nylon composites. Moisture and temperature are found to be the environmental factors that will have an effect on the rotating bands in their respective storage environments. Absorbed moisture is found to increase the impact …

Thermo-Mechanical Reliability Of Micro-Interconnects In Three-Dimensional Integrated Circuits: Modeling And Simulation, Omar Rodriguez

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Three-dimensional integrated circuits (3D ICs) have been designed with the purpose of achieving higher communication speed by reducing the interconnect length between integrated circuits, and integrating heterogeneous functions into one single package, among other advantages. As a growing, new technology, researchers are still studying the different parameters that impact the overall lifetime of such packages in order to ensure the customer receives reliable end products. This study focused on the effect of four design parameters on the lifetime of the interconnects and, in particular, solder balls and through-silicon vias (TSVs). These parameters included TSV pitch, TSV diameter, underfill stiffness and …

Mechanical Behavior Of Alloy 230 At Temperatures Relevant To Ngnp Program, Sudin Chatterjee

UNLV Theses, Dissertations, Professional Papers, and Capstones

Identification and selection of suitable structural materials for heat exchanger application within the purview of the next generation nuclear plant (NGNP) program constitute a major challenge. This challenge stems from the lack of many desired metallurgical and mechanical properties of conventional metallic materials and alloys for applications at temperatures approaching 950 oC. Nickel (Ni)-base Alloy 230 has been highly recommended as a suitable structural material for such application due to its excellent resistance to high-temperature plastic deformation and superior corrosion resistance in many hostile environments. Systematic studies on tensile, fracture toughness, creep, stress-rupture and creep-fatigue behavior of this alloy have …

Experimental And Numerical Analysis Of Structures With Bolted Joints Subjected To Impact Load, Kumarswamy K. Nakalswamy

UNLV Theses, Dissertations, Professional Papers, and Capstones

The aim of this study is to analyze the transient behavior of structures with bolted joints subjected to impact or shock loads using experimental methods and Finite Element Analysis (FEA). Various factors that affect the response of the bolted joint structures for shock loading were studied, such as damping, preload, intensity of impact load and type of FE modeling. The objective of this work was to develop computational modeling procedures that provide structural analysts an improved physics-based shock model for combat vehicles focusing mainly on shock transmission across bolted joints. There is only a limited amount of published literature describing …

Hydrogen Fuel Cell Analysis: Lessons Learned From Stationary Power Generation Final Report, Scott E. Grasman, John W. Sheffield, Fatih Dogan, Sunggyu Lee, Umit O. Koylu, Angie Rolufs

Materials Science and Engineering Faculty Research & Creative Works

This study considered opportunities for hydrogen in stationary applications in order to make recommendations related to RD&D strategies that incorporate lessons learned and best practices from relevant national and international stationary power efforts, as well as cost and environmental modeling of pathways. The study analyzed the different strategies utilized in power generation systems and identified the different challenges and opportunities for producing and using hydrogen as an energy carrier. Specific objectives included both a synopsis/critical analysis of lessons learned from previous stationary power programs and recommendations for a strategy for hydrogen infrastructure deployment. This strategy incorporates all hydrogen pathways and …

College Of Engineering Senior Design Competition Spring 2010, University Of Nevada, Las Vegas

Fred and Harriet Cox Senior Design Competition Projects

Each student in his or her senior year chooses, plans, designs, and prototypes a product in this required element of the curriculum. The senior design project encourages the student to use everything learned in the engineering program to create a practical, real-world solution to an engineering challenge.

A highlight of the year-long senior design project is the senior design competition. This competition, which usually takes place the week before finals each semester, helps focus the senior students on increasing the quality and potential for commercial application for their design projects.

Judges from local industry evaluate the projects on innovation, commercial …

Computer Program And Method For Detecting And Predicting Valve Failure In A Reciprocating Compressor, Ming-Chuan Leu, Jagannathan Sarangapani, Raghuram Puthall Ramesh

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Embodiments of the present invention provide a method implemented by a computer program for detecting and identifying valve failure in a reciprocating compressor and further for predicting valve failure in the compressor. Embodiments of the present invention detect and predict the valve failure using wavelet analysis, logistic regression, and neural networks. A pressure signal from the valve of the reciprocating compressor presents a non-stationary waveform from which features can be extracted using wavelet packet decomposition. The extracted features, along with temperature data for the valve, are used to train a logistic regression model to classify defective and normal operation of …

Multiobjective Optimization Method For Identifying Modular Product Platforms And Modules That Account For Changing Needs Over Time, Patrick K. Lewis

Theses and Dissertations

Natural and predictable changes in consumer needs often require the development of new products. Providing solutions that anticipate, account for, and allow for these changes over time is a significant challenge to manufacturers and design engineers. Products that adapt to these changes through the addition of modules reduce production costs through product commonality and provide a set of products that cater to customization and adaptation. In this thesis, a multiobjective optimization design method using s-Pareto frontiers – sets of non-dominated designs from disparate design models - is developed and used to identify a set of optimal adaptive product designs that …

A Concise Model Of 3x7 Wire Rope Used In Cable Guardrail Systems, Cody S. Stolle

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

Wire rope is a versatile, flexible, high-strength member that is used in many mechanical systems. However, due to the complexity of wire rope, analytical investigations have been relatively limited. Previous attempts to create simplified models of wire rope were not validated with physical testing and used a cumbersome beam-and-shell or beam-and-solid method for simulating the wire rope. An improved LS-DYNA model of 19-mm diameter 3x7 wire rope commonly used in roadside cable guardrail installations has been developed. A Belytschko-Schwer beam element was selected along with material *MAT_166. Since wire rope displays internal damping due to friction of strands and wires, …

Plasma Actuator, Jamey D. Jacob

Mechanical Engineering Faculty Patents

An actuator including a first and second conductor on a dielectric, wherein application of a voltage to the first conductor creates a plasma, thereby modifying a fluid flow in communication with the actuator. Related systems and methods are also provided.

Newsletter 41 Issue 1 - Spring 2010 - Nuts And Bolts, Larsen Tractor Museum

Friends of the Larsen Tractor Museum

No abstract provided.

A Design Framework That Employs A Classification Scheme And Library For Compliant Mechanism Design, Brian Mark Olsen

Theses and Dissertations

Limited resources are currently available to assist engineers in implementing compliant members into mechanical designs. As a result, engineers often have little to no direction incorporating compliant mechanisms. This thesis develops a conceptual design framework and process that utilizes a proposed classification scheme and a library of mechanisms to help engineers incorporate compliant mechanisms into their applications. As the knowledge related to the synthesis and analysis of compliant mechanisms continues to grow and mature, and through the classification scheme established in this thesis, compliant mechanisms may become more extensively used in commercial mechanical designs. This thesis also demonstrates a design …

Optimization And Evaluation Of A Proportional Derivative Controller For Planar Arm Movement, Kathleen M. Jagodnik, Antonie J. Van Den Bogert

Mechanical Engineering Faculty Publications

In most clinical applications of functional electrical stimulation (FES), the timing and amplitude of electrical stimuli have been controlled by open-loop pattern generators. The control of upper extremity reaching movements, however, will require feedback control to achieve the required precision. Here we present three controllers using proportional derivative (PD) feedback to stimulate six arm muscles, using two joint angle sensors. Controllers were first optimized and then evaluated on a computational arm model that includes musculoskeletal dynamics. Feedback gains were optimized by minimizing a weighted sum of position errors and muscle forces. Generalizability of the controllers was evaluated by performing movements …

Optimality Principles For Model-Based Prediction Of Human Gait, Marko Ackermann, Antonie J. Van Den Bogert

Mechanical Engineering Faculty Publications

Although humans have a large repertoire of potential movements, gait patterns tend to be stereotypical and appear to be selected according to optimality principles such as minimal energy. When applied to dynamic musculoskeletal models such optimality principles might be used to predict how a patient's gait adapts to mechanical interventions such as prosthetic devices or surgery. In this paper we study the effects of different performance criteria on predicted gait patterns using a 2D musculoskeletal model. The associated optimal control problem for a family of different cost functions was solved utilizing the direct collocation method. It was found that fatigue-like …

Development Of Criteria For Lamina Emergent Mechanism Flexures With Specific Application To Metals, Devin Bradley Ferrell

Theses and Dissertations

This thesis introduces new revolute and torsional lamina emergent mechanism (LEM) flexure designs that are suited for use in metals. Previous LEM flexures have been designed for use in highly elastic materials, such as polymers. In extending LEM flexure designs to metals, a LEM flexure design criteria is also introduced. The LEM flexure criteria is based on relative performance between the LEM flexure and a performance datum which the LEM flexure must improve upon. This performance datum, or benchmark, is a section of lamina that is of the same overall length, width, and thickness as the LEM flexure. An analysis …

A Proposed Learner-Centered Mechatronics Engineering Instructional Program, Patrick N. Currier, Richard Goff, Janis Terpenny

Mechanical Engineering - Daytona Beach

This paper examines the need and requirements for a mechatronics degree program. The results of a survey of the few existing programs in this field are provided. Then, using a case study example for Virginia Tech, a proposed mechatronics curriculum based on a learner-centered paradigm is described. The curriculum combines existing courses in mechanical, electrical, and computer engineering with new, hands-on courses to provide students with a chance to practice and explore the subject matter in ways consistent with the demands of both industry and accreditation. This program, if implemented, could provide a university with a unique offering to attract …

Role Of Faculty In Promoting Lifelong Learning: Characterizing Classroom Environments, Susan M. Lord, John Chen, Katharyn E. K. Nottis, Candice Stefanou, Michael J. Prince, Jonathon Stolk

Mechanical Engineering

Calls for educational reform emphasize the need for student-centered learning approaches that foster lifelong learning. To be a lifelong learner includes characteristics consistent with those of self-directed learners, such as being curious, motivated, reflective, analytical, persistent, flexible, and independent. Educational research has shown that the building of these aptitudes involves a complex interplay among nearly every aspect of human development. Instructor support of students’ self-directed learning (SDL) development relies on understanding and balancing these factors in the classroom. Engineering educators play a critical role in influencing outcomes related to SDL through their design of courses that support students’ transitions from …

Multidisciplinary Engineering Systems 2nd And 3rd Year College-Wide Courses, Kevin Craig, Mark L. Nagurka

Mechanical Engineering Faculty Research and Publications

Undergraduate engineering education today is ineffective in preparing students for multidisciplinary system integration and optimization - exactly what is needed by companies to become innovative and gain a competitive advantage in this global economy. While there is some movement in engineering education to change that, this change is not easy, as it involves a cultural change from the silo approach to a holistic approach. The ABET-required senior capstone multidisciplinary design course too often becomes a design-build-test exercise with the emphasis on just getting something done. Students rarely break out of their disciplinary comfort zone and thus fail to experience true …

Shape And Pose Recovery Of Novel Objects Using Three Images From A Monocular Camera In An Eye-In-Hand Configuration, Steven C. Colbert

USF Tampa Graduate Theses and Dissertations

Knowing the shape and pose of objects of interest is critical information when planning robotic grasping and manipulation maneuvers. The ability to recover this information from objects for which the system has no prior knowledge is a valuable behavior for an autonomous or semiautonomous robot. This work develops and presents an algorithm for the shape and pose recovery of unknown objects using no a priori information. Using a monocular camera in an eye-in-hand configuration, three images of the object of interest are captured from three disparate viewing directions. Machine vision techniques are employed to process these images into silhouettes. The …

Classes That Click: Fast, Rich Feedback To Enhance Student Learning And Satisfaction, John C. Chen, Dexter C. Whittinghill, Jennifer A. Kadlowec

Mechanical Engineering

No abstract provided.

Effect Of Loading Condition On Traction Coefficient Between Shoes And Artificial Turf Surfaces, Seth M. Kuhlman, Michelle B. Sabick, Ronald Pfeiffer, Benjamin Cooper, Jackie Forhan

Mechanical and Biomedical Engineering Faculty Publications and Presentations

Background. The interaction between a shoe and a turf surface is highly complex and difficult to characterize. Over the three decades since artificial turf was introduced, researchers have attempted to understand the traction caused by the interaction. However, some of the methodologies used for traction measurements have not capitalized on advances in currently available technology for testing and most testing conditions have not simulated realistic physiological loads.

Method of Approach. To assess the effect of test condition on traction results, the newly designed TurfBuster testing device was used to collect traction data on FieldTurf™ brand artificial turf under varying conditions. …

Towards Optimization Of A Low Temperature Co-Fired Ceramic Catalyst Chamber For A Monopropellant Microthruster, Andrew Vissotski

McNair Scholars Research Journal

The reduction in space vehicle size and mass presents the need to develop a proportionally smaller propulsion system for orbital station keeping. A Low Temperature Co-Fired Ceramic (LTCC) monopropellant micropropulsion device has been developed at BSU. The simple, robust design features a heterogeneous catalyst chamber used to decompose a rocket-grade hydrogen peroxide monopropellant, to produce thrust. Initial prototype testing indicates only partial peroxide decomposition requiring an in-depth analysis of the geometric layout of the devices to increase system efficiency. This study employs a control volume based methodology to analyze the performance of various catalyst chamber designs. This approach was chosen …

Experimental Investigation Of Flow And Heat Transfer Characteristics Of R -134a In Microchannels, Abdullahel Bari

Doctoral Dissertations

The purpose of this study was to investigate the flow and heat transfer characteristics of liquid refrigerant R-134a in rectangular microchannels. The research concentrated mostly upon single-phase experiments with limited investigation of boiling phenomenon in microchannels. Tests were performed using rectangular microchannels with hydraulic diameters ranging from 112 μm to 210 μm and aspect ratios varying approximately from 1.0 to 1.5. The Reynolds number in the experiments ranged from 1,200 to 13,000 although most data were collected in the transition and turbulent flow regimes.

The experimental data for friction factor measurement had a similar trend as predicted by macroscale theory …

On The Effective Elastic Properties Of Macroscopically Isotropic Media Containing Randomly Dispersed Spherical Particles, D. Cojocaru, Anette M. Karlsson

Mechanical Engineering Faculty Publications

computational scheme for estimating the effective elastic properties of a particle reinforced matrix is investigated. The randomly distributed same-sized spherical particles are assumed to result in a composite material that is macroscopically isotropic. The scheme results in a computational efficient method to establish the correct bulk and shear moduli by representing the three-dimensional (3D) structure in a two-dimensional configuration. To this end, the statistically equivalent area fraction is defined in this work, which depends on two parameters: the particle volume fraction and the number of particles in the 3D volume element. We suggest that using the statistically equivalent area fraction,introduced …