Mechanical Engineering Commons^™

Dry Magnetic Assisted Impaction Mixing Of Sub-Micron Boron And Barium Chromate For A Time Delay Composition, Ryan Barrow

Theses

The objective of this investigation is to improve the mixture homogeneity of, Boron and Barium Chromate, a delay composition called T-10, using a novel dry mixing technique, , called the Magnetic Assisted Impaction Mixing (MAIM). Two additional mixing methods, ultra-sonic mixing and shaker mixing (dry and wet), were used for comparative analysis, to evaluate the mixing effectiveness of the MAIM which was also compared to two Navy mixed T-l0 samples. Characterization of the homogeneity is described by how well boron is effectively distributed throughout the mixture, which is a challenging task since the mixture's composition is 3% Boron versus 97% …

Microrobot For Surgical Applications: United States Patent No. Us 7,042,184 B2, Dmitry Oleynikov, Shane Farritor, Adnan Hadzialic, Stephen R. Platt

Department of Mechanical and Materials Engineering: Faculty Publications

The present invention provides a micro-robot for use inside the body during minimally-invasive surgery. The microrobot may include various sensors, imaging devices or manipulators.

College Of Engineering Senior Design Competition Spring 2006, University Of Nevada, Las Vegas

Fred and Harriet Cox Senior Design Competition Projects

Part of every UNLV engineering student’s academic experience, the senior design project stimulates engineering innovation and entrepreneurship. Each student in their senior year chooses, plans, designs and prototypes a product in this required element of the curriculum. A capstone to the student’s educational career, the senior design project encourages the student to use everything learned in the engineering program to create a practical, real world solution to an engineering challenge.

The senior design competition helps to focus the senior students in increasing the quality and potential for commercial application for their design projects. Judges from local industry evaluate the projects …

Air Jet Impingement For Levitation, James Frederick Huber

Mechanical and Aerospace Engineering Theses - Archive

Traditional part acquisition methods such as vacuum cups and robotic grippers do not meet the handling needs of truly fragile materials, because both of these methods require surface contact. An alternative to these traditional approaches is the use of air jet impingement for levitation. This technique confines impinged air to a thin disk above the target to form radial diffuser. The Bernoulli Effect causes a pressure difference between the fast-moving impinged air above the surface and ambient air below it. The net pressure difference is sufficient to lift objects weighing more than one kilogram using standard shop air. This method …

Frequency Response Approximation Methods Of The Dissipative Model Of Fluid Transmission Lines, John King

Mechanical and Aerospace Engineering Theses - Archive

This thesis introduces an accurate and efficient method of obtaining a linear approximation for a nonlinear model of a complete fluid transmission line system using Matlab® Signal Processing Toolbox and Symbolic Math Toolbox programs. This technique is then packaged in a Graphical User Interface program to streamline the process of analyzing a total system. The method of approximating the frequency response of a fluid transmission line with a rational polynomial transfer function using the Matlab® 'invfreqs' least squares curve fitting algorithm has already been introduced. This research improves the technique by applying the 'invfreqs' command to a total system rather …

Structural Optimization Using Femlab And Smooth Support Vector Regression, Divija Odapally

Mechanical and Aerospace Engineering Theses - Archive

In recent years support vector machine (SVM) has been emerging as a popular tool for function approximation. Application of SVM for approximation of mathematical functions and complex engineering analysis has been represented by Palancz et al and Clarke et al, respectively. However the training of the original SVM involves the solution of a quadratic programming (QP) problem. This makes the application of SVM to large problem computationally expensive. To circumvent this difficulty, Lee et al developed a more efficient SVM formulation namely epsilon-SSVR which drastically improved the training efficiency of SVM. In this research the SSVR is used to build …

Finite Element Analysis Of Moisture And Thermal Induced Stress In Flip Chip Packages, Santanu Ghosh

Mechanical and Aerospace Engineering Theses - Archive

The process of moisture absorption and subsequent hygroswelling stress development is a cause of concern in the IC packaging industry. Also thermal stresses developed during the lead free reflow process with a high peak temperature (~ 250oC) add to the problem. In Flip Chip packages, the related effects are high shear stresses at the multilayer interfaces and normal stresses in solder balls. This can lead to phenomenon like delamination at the interfaces and UBM opening. In this work we have made an attempt to simulate the moisture absorption process, subsequent hygroswelling stress development, and thermal stress generated during reflow using …

Stresses In Proton Exchange Membranes Due To Hygro-Thermal Loading, Yaliang Tang, Michael H. Santare, Anette M. Karlsson, Simon Cleghorn, William B. Johnson

Mechanical Engineering Faculty Publications

Durability of the proton exchange membrane (PEM) is a major technical barrier to the commercial viability of polymer electrolyte membrane fuel cells (PEMFC) for stationary and transportation applications. In order to reach Department of Energy objectives for automotive PEMFCs, an operating design lifetime of at least 5000 h over a broad temperature range is required. Reaching these lifetimes is an extremely difficult technical challenge. Though good progress has been made in recent years, there are still issues that need to be addressed to assure successful, economically viable, long-term operation of PEM fuel cells. Fuel cell lifetime is currently limited by …

Utilization Of Ultrasonic Consolidation In Fabricating Satellite Decking, Joshua L. George

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

A fundamental investigation of the use of ultrasonic consolidation (UC) to produce deck panels for small satellites was undertaken. Several fabrication methods for producing structural panels and decking were analyzed. Because of its ability to create aluminum objects in an additive fashion, and at near-room temperatures, UC was found to be a powerful solution for creating highly integrated and modular satellite panels. It also allowed a lightweight and stiff deck to be fabricated without the use of adhesives.

A series of experiments were performed to understand the issues associated with creating a sandwich-type structure using UC. The experiments used a …

Experimental And Finite Element Analysis Of Preloaded Bolted Joints Under Impact Loading, Brendan O'Toole, Kumarswamy Karpanan, Masoud Feghhi

Mechanical Engineering Faculty Research

One of the primary parameters in analyzing bolted joints is preload in the bolt. We have considered several possible preload modeling techniques to analyze the effect of preload on the dynamic response of the bolted joints. Five different methods of applying preload in the nonlinear finite element analysis are evaluated. These methods are “force on bolt and nut”, “force on bolt shank”, “interference fit”, “thermal gradient” and “initial stress method”. Explicit and implicit analyses are used for transient response and preload generation in bolt respectively. Time history and shock response spectrum are used to compare experimental and simulation results. Simulation …

Modeling And Representation Of Geometric Tolerances Information In Integrated Measurement Processes, Xiaoping Zhao, T. M. Kethara Pasupathy, Robert G. Wilhelm

Department of Mechanical and Materials Engineering: Faculty Publications

Modeling and representation of geometric tolerances information across an enterprise is viable due to the advances in Internet technologies and increasing integration requirements from industry. In Integrated Measurement Processes (IMP), geometric tolerances data model must support different models from several well-defined standards: including ASME Y14.5M-1994, STEP, DMIS, and others. In this paper, we propose a layered conformance level geometric tolerances representation model. This model uses the widely applied ASME Y14.5M-1994 as its foundation layer by abstracting most information from this standard. The additional geometric tolerances information defined by DMIS and STEP is incorporated into this model to form corresponding conformance …

An Xyz Micromanipulator With Three Translational Degrees Of Freedom, Kimberly A. Jensen, Craig P. Lusk, Larry L. Howell

Faculty Publications

This paper introduces a three degree of freedom XYZ Micromanipulator (XYZM) that is fabricated in the x-y plane and positions components in the x, y, and z directions using three independent linear inputs. The mechanism positions components on a platform using three legs, each composed of a slider mechanism and a parallelogram mechanism.

Non-Isothermal Reaction-Diffusion Systems With Thermodynamically Coupled Heat And Mass Transfer, Yaşar Demirel

Papers in Analytical Chemistry

Non-isothermal reaction-diffusion (RD) systems control the behavior of many transport and rate processes in physical, chemical, and biological systems. A considerable work has been published on mathematically coupled nonlinear differential equations of RD systems by neglecting the possible thermodynamic couplings among heat and mass fluxes, and reaction velocities. Here, the thermodynamic coupling refers that a flux occurs without its primary thermodynamic driving force, which may be gradient of temperature, or chemical potential, or reaction affinity. This study presents the modeling equations of non-isothermal RD systems with coupled heat and mass fluxes excluding the coupling of chemical reactions using the linear …

Driveline For The Usu 2006 Mini Baja, Daniel Chase Swenson

Undergraduate Honors Capstone Projects

The Mini Baja project is part of an intercollegiate engineering design competition sponsored by SAE. For this competition senior engineering students at USU design and build a small off-road racecar. The design of the car is broken up into several different subassemblies. The driveline subassembly is responsible for transmitting the power from the transmission to the rear wheels. This is accomplished using several different components that have all been analyzed and designed. The completed driveline is able to accommodate sixteen inches of suspension travel, is lightweight, and was inexpensive to build. The driveline along with the rest of the car …

Manipulation Of Polystyrene Microparticles On A Microchannel Glass, Ravi Mamillapalli, Henry D. Young

Browse all Theses and Dissertations

Bulk quantities of spherical microbeads have various applications in research and industrial fields. Simple techniques are required to be developed in order to manipulate and modify large numbers of these beads simultaneously. In our experiment, a microchannel glass-based microfluidic device is used to actuate large numbers of microbeads in parallel. The microchannel glass used in these experiments contains channels 4.1 μm in diameter. The microbeads are polystyrene beads which are superparamagnetic in nature and 5-6 μm in diameter. An aqueous suspension of microbeads is injected into a 2-chamber fluid cell that contains a separator, microchannel glass. The beads are reversibly …

The Effect Of The Shear-Thickening Transition Of Model Colloidal Spheres On The Sign Of N1 And On The Radial Pressure Profile In Torsional Shear Flows, M. Lee, Mataz Alcoutlabi, J. J. Magda, C. Dibble, M. J. Solomon, X. Shi, G. B. Mckenna

Mechanical Engineering Faculty Publications

A novel rheometer plate was used to measure radial pressure profiles during cone-and-plate and parallel-plate shearing flows of a concentrated colloidal dispersion of polymethyl methacryalate spheres suspended in dioctyl phthalate. There is a long history of using suspensions of this type as a model rheological system. The measured pressure profile can be used to calculate N1 and N2, and also provides a check on the flow field in the rheometer. At shear rates just below onset of shear thickening, our measurements show that N1 is positive as predicted by Stokesian dynamics simulations of model Brownian hard spheres, but we are …

High Temperature Heat Exchanger Project: Quarterly Progress Report January 1, 2006 Through March 31, 2006, Anthony Hechanova

Publications (NSTD)

Quarterly Collaboration Meeting. The UNLVRF HTHX Project quarterly meeting was held in Albuquerque, NM, March 16 and 17, 2006. The purpose of the meeting was to promote collaboration and communication among the UNLV Research Foundation partners. A tour of Sandia National Laboratory was also provided that included a visit to their sulfuric acid decomposition test apparatus. There were 24 attendees from universities, national laboratories, and private industry. Collaborators discussed their research progress. The next meeting will be in July in Salt Lake City, UT.

Unlv Research Foundation High Temperature Heat Exchanger Development, Anthony Hechanova

Publications (NSTD)

Barriers addressed:

Nuclear Hydrogen Initiative R&D Plan – Material performance and component design and testing for: intermediate heat exchanger and high-temperature thermochemical water splitting (H2SO4 decomposition and HI decomposition). Improved materials for High Temperature Electrolysis.

2nd Annual Undergraduate Research Conference Abstract Book, University Of Missouri--Rolla

Undergraduate Research Conference at Missouri S&T

No abstract provided.

Current Trends In Bumper Design For Pedestrian Impact, Peter J. Schuster

Mechanical Engineering

Worldwide, the pace of development in pedestrian countermeasures is increasing rapidly. To better understand the state of the art in bumper design for pedestrian impact, a survey of literature and patents has been performed. Two general approaches to reducing the severity of pedestrian lower limb impacts were identified: (a) Provide cushioning and support of the lower limb with a bumper and a new lower stiffener, or (b) Use the bumper as a platform for impact sensors and exterior airbags. This study focused on the first approach. Excluding bumper sensors, airbags, and non-design-related articles, a total of 130 relevant technical articles …

An Investigation On The Importance Of Material Anisotropy In Finite-Element Modeling Of The Human Femur, Ryan Krone, Peter Schuster

Mechanical Engineering

Detailed finite element modeling of the human body offers a potential major enhancement to the prediction of injury risk during vehicle impacts. Currently, vehicle crash safety countermeasure development is based on a combination of testing with established anthropomorphic test devices (i.e., ATD or dummy) and a mixture of multi-body (dummy) and finite element (vehicle) modeling. If a relatively simple finite element model can be developed to capture additional information beyond the capabilities of the multi-body systems, it would allow improved countermeasure development through more detailed prediction of performance.

A simpler finite element model of human bones could be developed if …

Impact Of Solar Powered Disaster-Resistant Communities, Florida Solar Energy Center, William Young

FSEC Energy Research Center®

Natural and man made disasters can destroy lives, homes, businesses, the economy and the environment. Disasters can happen with little or no warning, leaving hundreds or even thousands of people without medical services, potable water, sanitation, communications and electrical services for up to several weeks. This paper identifies the imperative for and value of creating disaster-resistant homes and communities. The use of renewables, the application of distributed generation, implementation of energy-efficient building designs and construction of disaster-resistant structures can minimize the destruction of property, cost of recovery and disruption of lives. Through enhanced construction practices and the use of solar …

Energy Efficient Process Heating: Insulation And Thermal Mass, Kevin Carpenter, J. Kelly Kissock

Mechanical and Aerospace Engineering Faculty Publications

Open tanks and exterior surfaces of process heating equipment lose heat to the surroundings via convection, radiation, and/or evaporation. A practical way of reducing heat loss is by insulating or covering the surfaces. This paper presents methods to quantify heat loss and energy savings from insulating hot surfaces and open tanks. The methods include radiation and evaporation losses, which are ignored by simplified methods. In addition, thermal mass, such as refractory, conveyor and racking equipment, acts as a heat sink and increases heating energy use in process heating applications. This paper presents lumped capacitance and finite-difference methods for estimating heat …

Ole Miss Engineer 2006

Ole Miss Engineer

No abstract provided.

Solar Energy Conversion Through Seaweed Photosynthesis With Combustion In A Zero-Emission Power Plant, Evgeny Yantovski, Jim Mcgovern

Other resources

A proposed ‘closed cycle’ power plant scheme, referred to as SOFT (Solar Oxygen Fuel Turbine), is described. The scheme involves the cultivation of macroalgae in a pond, combustion of their organic matter in a fluidised bed boiler that generates steam for a Rankine cycle steam power plant and the return of the combustion products to the pond to feed the algae. Oxygen, equivalent to that used for combustion, is re-released to the atmosphere by photosynthesis, while the carbon dioxide that is produced by combustion is absorbed by photosynthesis and thereby recycled. It is proposed that the seaweed Ulva, which is …

Viscoplastic Finite-Element Simulation To Predict The Solder Joint Fatigue Life Of Different Flash Memory Die Stacking Architectures, Yong Je Lee

Mechanical and Aerospace Engineering Theses - Archive

This thesis focuses on the viscoplastic finite-element simulation to predict the solder joint fatigue life of different die stacking architectures for flash memory products. Four different stacked package architectures were evaluated as follows: pyramid, rotated, and spacer stacking, while interconnection (solder joint) was held constant. Number of dies for all four stacking configurations were varied from three, five and seven. To keep the package height constant, the die and die attach thickness were varied and the resulting effects on the stresses were investigated. A quarter and half symmetry model of stacked flash package are generated using ANSYS APDL script. The …

Numerical Simulations On Machining Of Silicon Carbide, Jerry Jacob

Masters Theses

Experiments were conducted to determine the critical depth of cut for machining of single crystal silicon carbide through Single Point Diamond Turning (SPDT) and fly-cutting, and of CVD coated Silicon Carbide through scratching. The ductile nature of these nominally hard and brittle materials is believed to be the result of a high pressure phase transformation, which generates a plastic zone of material that behaves in a metallic manner. The SPDT experiments have shown chip formation similar to that in metal machining. This metallic behavior is the basis for using AdvantEdge, metal machining simulation software, for comparison to experimental results. The …

Computational Simulation Of Turbulent Forced Convection Flow Over A Horizontal Plate Heater In A Rectangular Channel, Bhagavathi Perumal Natarajan

Masters Theses

The phenomenon of turbulent forced convection in the entry region of a rectangular duct was investigated computationally using commercial CFD software, FLUENT. The Standard k-ε turbulence model from FLUENT was used to model turbulence in the 20mm high x 30mm wide cross-sectional rectangular duct. The operating fluid used for the three-dimensional CFD study was water at an inlet temperature of 90° C, with the velocities ranging from 0.5 m/s to 2 m/s, at 1 atm pressure. A constant heat flux was applied to the base of the rectangular channel with the other flow walls insulated. The heat flux ranged from …

Numerical Study On Capillarity- Dominant Free Surface And Interfacial Flows, Zhaoyuan Wang

Mechanical and Aerospace Engineering Dissertations - Archive

The continuum surface force (CSF) method has been extensively employed in the volume-of-fluid (VOF), level set (LS) and front tracking methods to model surface tension forces. Its ability is limited for the surface tension dominant free surface and interfacial flows due to the existence of spurious currents. These currents may lead to disastrous interface instabilities and failure of grid convergence, which are present in all the previous versions of the CSF algorithm. In this study, a coupled level set and volume-of-fluid method (CLSVOF) is employed for interface tracking, which offers more accurate computations of the curvature and the normal vector …

Test Methods And Results For Sensors In A Pre-Crash Detection System, Charles Birdsong, Peter Schuster, John Carlin, Daniel Kawano, William Thompson

Mechanical Engineering

Automobile safety can be improved by anticipating a crash before it occurs and thereby providing additional time to deploy safety technologies. This requires an accurate, fast and robust pre-crash sensor that measures telemetry, discriminates between classes of objects over a range of conditions, and has sufficient range and area of coverage surrounding the vehicle. The sensor must be combined with an algorithm that integrates data to identify threat levels. No one sensor provides adequate information to meet these diverse and demanding requirements. However the requirements can be met with an optimal combination of multiple types of sensors. Previous work considered …