Mechanical Engineering Commons^™

Lip Thrust Apparatus, Ian M. Wilson, Alvin K. Cheong

Mechanical Engineering

This document contains the background information, defined scope of work, preliminary design philosophy, conceptual design development, and final design choices along with its corresponding manufacturing and design verification plans. It also includes the preliminary testing and prototyping necessary in bringing our verification prototype to its final configuration for delivery. Finally, it includes the entire manufacturing process followed in creating the final project and the extensive testing performed to ensure it meets the defined engineering specifications. The aerodynamic phenomenon being analyzed and demonstrated in our final deliverable can be seen in a scenario where when a propeller is enclosed in a …

Indirect Thermosiphon Flat-Plate Solar Collector Performance Based On Twisted Tube Design Heat Exchanger Filled With Nanofluid, Mahmoud Eltaweel, Hazem Hussien, Ahmed A. Abdel-Rehim

Mechanical Engineering

No abstract provided.

Energetic And Exergetic Analysis Of A Heat Pipe Evacuated Tube Solar Collector Using Mwcnt/Water Nanofluid, Mahmoud Eltaweel, Ahmed A. Abdel-Rehim

Mechanical Engineering

Increasing the energy demand and the limited availability of conventional energy sources are the main challenges to secure the human future. Solar energy is an attractive source of energy to ensure the sustainability of energy in this world for now and for the future. Evacuated tube solar collector is a solar thermal collector mostly used for domestic applications. The replacement of the working fluid with nanofluid can enhance the heat transfer even for low temperature applications. The effect of multi-walled carbon nanotubes and water nanofluid as working fluid in evacuated tube solar collector is used to experimentally investigate the energy …

Numerical Investigation Of Darrieus Wind Turbine With Slotted Airfoil Blades, Ahmed Elbaz, Omar Sherif Mohamaed, Ahmed Abdelhamid Ibrahim, Ahmed Khaled Etman, Amr A. Abdelfattah

Mechanical Engineering

Low starting torque is considered as one of the major drawbacks of Darrieus type vertical axis wind turbine (VAWT). Design optimization to overcome this problem by modifying the airfoil geometry has received great attention by the wind energy community. Moreover, efforts have been directed towards augmenting the power coefficient of the turbine. In the present work, the effect of employing slotted airfoil as turbine blade on the performance and starting characteristics has been investigated. The slot parameters; slot location, angle of inclination, and dimensions, were optimized for NACA 0018 airfoil which is commonly used in Darrieus turbines. The flow over …

2-Axis Electric Off-Road Bucket Seat Bases, Brennan K. Slater, Alexander P. Croteau, Spencer M. Kubik

Mechanical Engineering

Off-road vehicle bucket seats are currently restricted to a single position relative to the floor of the vehicle. Drivers and riders desire the ability to adjust their seat position to increase comfort and allow for a greater size range of riders to fit safely within the cabin or roll cage. To develop a viable solution, the team has gone through an extensive design process and has constructed a functioning prototype. This Final Design Report encapsulates the entire design process and concludes with recommendations for changes we would make looking both back in review as well as moving forward with further …

Waste Gasification, Glyn D. Lewis, Nash Taylor, Nicholas L. Ordonez, David S. Mccallum

Mechanical Engineering

This document summarizes the work the IGT Team has conducted on the topic of waste to energy gasification over the Cal Poly Winter, Spring, and Fall quarters of 2019. The project is being carried out by four Cal Poly Mechanical Engineering students: Nash Taylor, Glyn Lewis, David McCallum, and Nicholas Ordonez and the sponsor of this project is Tod duBois. The team’s original goal was to successfully create a system that compiles residential solid waste on a small scale, gasifies it, and measures the typical syngas outputs, so that the team may assess the viability of gasification of household waste …

Deployable Cover For Cubesat Fuv Imager, Edwin J. Rainville, Patrick J. Rainville, Jeff Wagner

Mechanical Engineering

The goal is to develop a deployable cover for a far ultraviolet imager cube satellite that will be used to map the earth’s auroras in the ionosphere. The deployable cover is used to protect the Far Ultra-Violet (FUV) sensor and lenses, house two mirrors which are used to filter unwanted light and expose optics when deployed. The deployable cover consists of a door, an actuator, a lockout mechanism, and an “open position” indicator. This project also includes designing a fixture for testing the optical alignment of the deployable cover after launch and during orbital conditions. The subassembly is required to …

Model Block Press Design, Ben Todd Van Hamersveld, Chester Wong, Alexander Wing-Jon Giannousis

Mechanical Engineering

This project’s goal is to redesign the Center for Vocational Building Technology (CVBT) BP9 earth block press, which makes 1/3 scale compressed earth blocks to build demonstration model homes in Thailand. The full-scale block press, the BP6, provides a sustainable and affordable technique for constructing habitable homes in Thailand. The BP9 serves as a tool to inform the public of the advantages of human-powered earth block presses through demonstration. The BP9 press design has multiple problems: it is too expensive to manufacture, there is too much friction when used, it has several weak points due to users unintentionally applying excessive …

Mad Jack Alpine Touring Model Design, Austin Gasbarra, Gillian Stargensky, Madeleine Mccool, Brannon Smudz

Mechanical Engineering

Skiing is a sport enjoyed by millions of people every year, yet ski boots are very uncomfortable and cost- prohibitive, resulting in a low conversion rate of first-time skiers to lifetime skiers. Additionally, Alpine Touring (AT) is seeing a surge in popularity as ski resorts become more expensive, but few companies are developing affordable products in this realm. Mad Jack Snow Sports has developed a product that they believe addresses some of the main issues associated with skiing, but they want to develop their product line further. The problem statement and scope state that the purpose of this project is …

Critical Radius Of Insulation, Maria N. Ambrose, Samuel J. Sayre, Travis W. Martin, Matt T. Sterling

Mechanical Engineering

The critical radius of insulation is a counterintuitive concept within the study of heat transfer. The theory states that adding insulation to a cylindrical or spherical object will increase the rate of heat loss rather than decrease it, if the radius (thickness) of the insulation is at its “critical” value. The Critical Radius of Insulation Senior Project is designed to demonstrate this phenomenon to Heat Transfer students via a portable apparatus. The concept will be demonstrated with a cylindrical object which is heated by way of a separate voltage source. Thermocouples will display the temperature of the cylinder while insulation …

Fiberglass Mat-Roll Carryover, Bryce Youngson, Aaliyah Ramos, Johann Cayaban, Tony Ledesma

Mechanical Engineering

The asphalt shingle is a type of roof shingle that uses asphalt for waterproofing. Its low cost and easy installation make it one of the most common roof covers in North America. General Aniline and Film (GAF) is one of the nation’s largest manufacturers of roofing materials and produces asphalt shingles at their Shafter, California manufacturing facility. To manufacture asphalt shingles, a base material of fiberglass passes through a series of processes that sequentially add asphalt, ceramic-coated mineral granules, and thermoplastic adhesive. The fiberglass base-material arrives at the manufacturing facility in large rolls that workers must periodically splice together in …

Mechanized Advent Calendar, Oma Skyrus, Sigrid Derickson, Tyler Koski, Daniel Clifton

Mechanical Engineering

Within this document, the “Naughty and Nice” team will describe the details associated with the completion of this project, which involves creating an animated advent calendar for the Cambria Christmas Market. The problem, the customers and stakeholders, and the general goals of the project are introduced. The team conducted background research; how this research helps in finding a solution or supporting the needs of the sponsor is illustrated. Initial research includes interviews with the sponsor and potential users, patent and existing product searches, and some technical research pertaining to the subject. The team found that there are not many existing …

Katie's Jogger, Megan Guillermo, Erin Wint, Abdullah Sulaiman, Kathryn Mangiaracina

Mechanical Engineering

Edward Robinson is an avid runner who would like to take his daughter on runs. His daughter, Katie, is 100% wheelchair bound and currently does not fit in any commercial joggers on the market. The project team was expected to design, build, and test a custom working prototype of a jogger that the sponsor can use to take his daughter on runs. This entire project was performed over a span of three quarters.

Bicycle Drivetrain Power Measurement Study, Luke Costello, Nick Musolino, Ryan Miller, Jose Aguirre

Mechanical Engineering

The overarching goal of this project was to experimentally compare the bottom-bracket (BB) powermeter developed by Level Engineering, Inc., against off-the-shelf powermeters and a dynamometer. To do this, a significant amount of testing was performed. Level Engineering facilitated this testing by providing the project team with three testing apparatus – an In-Situ tester, a Stationary Tester, and a fatigue tester. The In-Situ tester was a bicycle outfitted with the BB prototype and a PowerTap powermeter. The Stationary Tester was a bicycle with a BB prototype, and the rear wheel replaced with a dynamometer. Finally, the fatigue tester made to apply …

E.M.B.E.R. Home Protection, Kylie Fernandez, Daniel Santoro, Ryan Kissinger, Christopher Slezak

Mechanical Engineering

Despite the increased danger of wildfires in states such as California and Colorado, there is yet to exist a product that can autonomously extinguish the spot fires that ignite from windblown embers. This device could reduce countless civilian casualties and prevent millions of dollars in property damage. This is not to mention allowing homeowners to evacuate with a greater peace of mind. Mass ownership of this product would be analogous to the “herd immunity” of vaccines, where neighbors ultimately protect each other and save money through self-insurance.

There are products on the market, generally in the commercial domain, that can …

Baja Sae Ecvt Mechanical Design, Tyler Lee Connel, Will Daniel Antes, Matt Stephen Balboni, Benjamin James Colard, Julian Edward Finburgh

Mechanical Engineering

This objective of this project was to design, manufacture, and test the mechanical systems of an electronically-controlled continuously variable transmission (eCVT) for the Cal Poly Baja SAE vehicle.

Electronic Cvt - Controls, Alec William Hardy, Jessalyn Leora Ann Bernick, Nicholas Esteban Capdevila, Tristan Charles Perry

Mechanical Engineering

The following document outlines the design process, manufacturing, and testing of the control system for an electronically controlled continuously variable transmission (ECVT). This control system was integrated into the custom designed and manufactured mechanical transmission system created in parallel by another senior project group. The transmission was designed for use in the Cal Poly Baja SAE vehicle. Through researching customer needs, competition requirements, previous and alternate CVT designs, and vehicle characteristics, we were able to determine the requirements and specifications for our unique system. Input, output, speed, and durability requirements guided our hardware selection. The primary components which comprised our …

Heat: Hydraulic And Electric Animation Team, Tyler J. Couvrette, Michael J. Cain, Sara T. Novell, Dexter K. Yanagisawa

Mechanical Engineering

Each New Years’ Day, the Cal Poly Rose Float presents a flower-covered float to the world at the Tournament of Roses parade. This floral display, paired with moving mechanical animations, shows off Cal Poly to the world. This project strove to keep Cal Poly on the cutting edge of technology both in parade floats, and in engineering, by creating a completely electric-powered animation system.

To accomplish this, a group of students set out to make the fully electric animation system that can power both the hydraulic and electric mechanisms on the Float. This was accomplished through months of planning and …

Fluid Power Vehicle Challenge - The Incompressibles - Final Design Report, Nicholas Gholdoian, Russell Posin, David Vitt, Alex Knickerbocker, Kyle Franck, Julian Rodkiewicz

Mechanical Engineering

This report provides a comprehensive description of the research, analysis and design work that The Incompressibles have completed thus far in the senior project process. This document includes all the work that The Incompressibles have completed for the team’s Preliminary Design Review (PDR), Critical Design Review (CDR), the work leading up to the 2019 FPVC competiton and the competition results. This report includes the initial research that the team completed for the fluid power competition, first iterations of designs, final iterations of designs, manufacturing results and processes, and finally testing and results from competition. With a new design for the …

Insulated Solar Electric Cooker Immersion Heater, Emily Burnside, Kaeley Dicks, Joshua R. Stevens, Brady Banks

Mechanical Engineering

This report is the final design review (FDR) report for our team completing the Insulated Solar Electric Cooker (ISEC) Immersion Heater mechanical engineering senior project. The goal of this project is to standardize and perform analysis on a preexisting, inexpensive solar-powered immersion heater for cooking use in developing countries, reducing the adverse effects presented by traditional biomass cooking fires. We also designed a manufacturing process to improve repeatability and to reduce labor investment of heater production. The ISEC research team from the California Polytechnic State University Physics Department have been working on the development of this immersion heater and have …

Additive Manufacturing Powder Removal: Viper 2.0, Andrew D. Epperson, Sean Mccracken, Melissa O'Neil, Alex Ward

Mechanical Engineering

This report presents the final design review of this senior project team. The project is being sponsored by Lawrence Livermore National Laboratory, a federal design agency. Lawrence Livermore National Laboratory is interested in improving their metal additive manufacturing process. The goal of this senior project is to improve the efficiency and safety of a method currently being used to remove metal powders for additively manufactured components. A senior project team in 2017-2018 created the Vibration Induced Powder Evacuator and Reclaimer (VIPER), a device that uses a vibration motor to shake a printed part until it is clean from excess powder. …

Cal Poly Satellite Positioning Systems: "Thrust Or Bust!", Josh W. Neiman, Milena A. Milich, Gerardo Ramirez, Joshua A. Tran

Mechanical Engineering

Satellites need a way to make precise corrections to their orbit and positioning. The purpose of this project is to design a gimbal mechanism for Astranis that orients an ion thruster along a requested vector. The gimbal must produce any vector within a 2.5° cone in a thirty-minute window. Current systems are expensive and not well suited to this application. The design must be operable in a space environment and optimize mass, size, and reliability. Our design toggles between four discrete positions to achieve an average thrust vector. The gimbal accomplishes this using four solenoids that tilt a plate about …

C6 Wheels, Samuel L. Pizot, Luke Martin, Josh Warner, Jonah Levis

Mechanical Engineering

This document details the C6 Wheels project being undertaken for senior design. The objective is to design and manufacture carbon fiber reinforced polymer wheels for the Cal Poly Formula Society of Automotive Engineers (FSAE) team. The wheel shells will be used on FSAE’s competition vehicles. FSAE requested the wheels to improve the handling characteristics of their vehicles by reducing the unsprung and rotational mass. They have attempted carbon fiber wheels previously but have not yet run any on their vehicles. FSAE specifically proposed the design of carbon fiber shells with an aluminum center as opposed to full carbon fiber wheels …

Nano Fab Lab 63, Brian K. Deemer, Josh Clemons, Nick Brodine, Delaney Fitzsimmons

Mechanical Engineering

Lawrence Livermore National Laboratories (LLNL) has several steps in the production process for ceramic nanofiber tubes that they would like to improve - electrospinning, cutting, rolling, sealing and heat treating. We undertook the challenge to deliver LLNL with a semi-automated process that efficiently integrates the steps of cutting, rolling, and sealing to save time and improve control over end dimensions. In this document, we discuss the technical background of the manufacturing steps currently followed to create nanofiber tubes, identify which steps are incorporated in our prototype and explain how they will interface with one another, define the design requirements, present …

Adapted Trailer Hitching System, Joseph Neil Hearn, Maxwell M. Selna, Maximilian D. Cossalter, Eric B. Ringsrud

Mechanical Engineering

This report highlights the entire design process of an adapted trailer hitching system for Taylor Morris: a navy veteran and quadruple amputee. This begins with problem definition through customer and product research. Objectives are generated after the problem is defined and the boundary of the project is set. This outcome of the project focuses on modifications/improvements to the vehicle side of the problem and leaves the trailers untouched. Engineering specifications are developed to constrain the concept design direction, which ultimately dictates the outcome of the final design. The final design is used as a basis to manufacture a structural prototype …

Commercial Vehicle Research Buggy For Active Driver Assistance Systems, Fernando Mondragon-Cardenas, Nathaniel Mccutcheon Furbeyre, Ricardo Steven Lickiss Tan Iv

Mechanical Engineering

This is the Final Design Report for Daimtronics, a senior project team sponsored by Professor Charles Birdsong of Cal Poly and by Daimler Trucks North America. This team integrated mechatronic systems into a scale semi-truck chassis using existing mechanical and software systems from three separate Cal Poly senior projects over the recent years: Daimscale, MicroLaren, and ProgreSSIV. The goal was to have a user-friendly platform capable of executing autonomous driving algorithms that are programmable at a high level in Simulink and Robotic Operating System (ROS). Advanced driver assistance and autonomous vehicle algorithms were not within the scope of this project, …

Gravity Drip Irrigation System, Ryan C. Waldron, Cole R. Presson, Josh L. Plaskett

Mechanical Engineering

A gravity-fed, drip irrigation system prototype has been developed for use in raised garden beds and other small-scale crop irrigation applications. The original developer of the prototype and sponsor of the project, Tina Creel, is seeking to refine it into a functional consumer product through the implementation of technical engineering and standard manufacturing processes. The scope of the project includes the tank support system and supply of water to the sponsors current piping subsystem. It does not include any modifications to the bed, piping system or water tank itself. The target specifications of the system include its load capacity, dimensions, …

Human Powered Vehicle Trainer, Nicholas Hung Nguyen, Gregory Reece Bridges, Jacinta Garcia, Mitchell Sidney Smith

Mechanical Engineering

This Final Design Review (FDR) document describes the final design and completed prototype of a Mechanical Engineering senior project team at California Polytechnic State University, San Luis Obispo. The project goal is to create an adjustable human powered vehicle training bike for George Leone that allows a rider to gain confidence with the unique reclined bike geometry ahead of the World Human Powered Speed Challenge at Battle Mountain, Nevada. This document outlines the customer’s needs and technical research performed which together determine the project’s scope and engineering specifications. Next, we present the initial idea generation process and its results, along …

Adaptive Paddle Board, Alexander Holthaus, Alexander Holthaus, Garrett Holmes, Garett Jones

Mechanical Engineering

This Final Design Review (FDR) document outlines the Adaptive Paddle Board senior project, done by four Mechanical Engineering Students at California Polytechnic State University and provides detail on the project and what the team has accomplished. The goal was to create a universally adaptive paddle board that can be used by the Central California Adaptive Sports Center for a wide range of persons with disabilities. This document highlights current research from patents and existing products, details regarding customer specifications, results from concept generation, the manufacturing and testing that went into the final design, and the process taken to get there. …

Uav Catapult, Sean Drew Huxley, Benjamin Richard Lacasse, David Matthew Garcia, Jordan Joseph Cearns

Mechanical Engineering

This document outlines the Senior Design Project proposed by Dr. Aaron Drake that was assigned to a team of Mechanical Engineering students at California Polytechnic State University, San Luis Obispo. The purpose of this project was to design, build, test, and finalize a launching system for two small, fixed wing, unmanned aerial vehicles (UAVs) owned by Dr. Drake and Cal Poly. The goal was to create a system that was both portable and reliable to use, only requiring a two-person team to use effectively in the field. The most important design requirements were determined to be the launch speed, assembly …