Mechanical Engineering Commons^™

Monitored Natural Attenuation For Coal Combustion Product Constituents In Groundwater, Jim Redwine, Bruce Hensel

World of Coal Ash Proceedings

No abstract provided.

Encapsulation Of Flue-Gas Desulfurization Wastewater Using Coal Combustion By-Product Mixtures: Field Lysimeter Investigations, Jason Raucci, Jeffrey Samson, Kirk Ellison, Ben Gallagher

World of Coal Ash Proceedings

No abstract provided.

Use Of Fly Ash As A Proppant In Fracking Unconventional Oil & Gas Wells, Tom Robl, Anne Oberlink, Robert Jewell, Tristana Duvallet

World of Coal Ash Proceedings

No abstract provided.

Bulk Storage (10,000+ Tons) Of Fly Ash, Fgd Gypsum, Limestone And Coal At Power Stations In Concrete Domes, Benjamin Davis, Zachary Fillmore, Michael Hunter

World of Coal Ash Proceedings

No abstract provided.

Soil Mixing And Slurry Trench Cutoff Walls For Coal Combustion Residue Sites, Jeffrey C. Evans, Daniel Ruffing

World of Coal Ash Proceedings

No abstract provided.

Cost-Effective, Environmentally-Friendly Ash Beneficiation Technology, Scott Ziegler

World of Coal Ash Proceedings

No abstract provided.

The Utilization Of Dry Scrubber Material For The Production Of Calcium Sulfoaluminate Clinkers And Cements, Tristana Y. Duvallet, Robert B. Jewell, Anne E. Oberlink, Thomas L. Robl

World of Coal Ash Proceedings

No abstract provided.

Net Environmental Benefit Analysis (Neba) For Ccr Pond Closure Decisions -- A Pathway To Meaningful Citizen Engagement And Reducing The Potential For Unnecessary Litigation, Chris Hardin, Ric Traver

World of Coal Ash Proceedings

No abstract provided.

Challenges Met In Using Bottom Ash As A Landfill Drainage Media, William M. Strachan

World of Coal Ash Proceedings

No abstract provided.

Two Bottom Ash Management/Handling System Enhancement Case Studies – From Technology Evaluation And Design Through Construction And Performance Verification, George Mckenzie, Aaron Davis, Chris Pickelmann, Jason Obermeyer

World of Coal Ash Proceedings

No abstract provided.

Slurry-Trench Cutoff Walls For The Containment Of The Coal Combustion Residuals (Ccr) Impacted Groundwater: Evaluation Of Hydraulic Conductivity And Consolidation Properties Of Soil-Bentonite Backfills, Y.L. Yang, Krishna Reddy, Y.J. Du, R.D. Fan

World of Coal Ash Proceedings

No abstract provided.

Ccp Beneficial Use Risk Assessment: Case Studies For Three Different Applications, Andrew Bittner, Ari Lewis

World of Coal Ash Proceedings

No abstract provided.

Corrective Measures/Corrective Action (Cm/Ca) Strategies That Effectively Integrate Engineered Pond Closures And Short/Long-Term Groundwater Management With Case Study Examples, Steve Putrich

World of Coal Ash Proceedings

No abstract provided.

Managing Landfill Leachate In A World Without Ash Basins: Lessons Learned And Practical Considerations, Evan Andrews, Michael Lazar

World of Coal Ash Proceedings

No abstract provided.

Developing Enhanced Monitored Natural Attenuation Strategies Using Reactive Transport Models, Pj Nolan, Hugh Davies, Greg Hebeler, Rens Verburg

World of Coal Ash Proceedings

No abstract provided.

Enhancing Coal Ash Impoundment Closure Using Value Engineering, Holt Wheeler, Trey Mangers, Paul Lear

World of Coal Ash Proceedings

No abstract provided.

Experimental Test Method To Determine The Reactivity Of Fly Ash For Use In Concrete Mixture Proportioning, Antara Choudry, Deborah Glosser, O. Burkan Isgor, W. Jason Weiss

World of Coal Ash Proceedings

No abstract provided.

Overview Of Epri Research On Environmental Issues And Beneficial Use Of Coal Combustion Products, Bruce Hensel, Ken Ladwig

World of Coal Ash Proceedings

No abstract provided.

Is My Site A Candidate For A Groundwater Natural Attenuation Remedy? A Geochemist’S Perspective, Bob Glazier

World of Coal Ash Proceedings

No abstract provided.

Impoundment Closure Enhancement Measures To Support Groundwater Compliance, John Hesemann, Wayne Weber, Eric Dulle

World of Coal Ash Proceedings

No abstract provided.

Panel On Liquefaction Of Ponded Fly Ash: From Laboratory To Practice, Tarunjit S. Butalia

World of Coal Ash Proceedings

No abstract provided.

Development Of A Sonically Powered Biodegradable Nanogenerator For Bone Regeneration, Avi S. Patel

University Scholar Projects

Background: Reconstruction of bone fractures and defects remains a big challenge in orthopedic surgery. While regenerative engineering has advanced the field greatly using a combination of biomaterial scaffolds and stem cells, one matter of difficulty is inducing osteogenesis in these cells. Recent works have shown electricity’s ability to promote osteogenesis in stem cell lines when seeded in bone scaffolds; however, typical electrical stimulators are either (a) externally housed and require overcomplex percutaneous wires be connected to the implanted scaffold or (b) implanted non-degradable devices which contain toxic batteries and require invasive removal surgeries.

Objective: Here, we establish a biodegradable, piezoelectric …

Development Of A Sonically Powered Biodegradable Nanogenerator For Bone Regeneration, Avi Patel

Honors Scholar Theses

Background: Reconstruction of bone fractures and defects remains a big challenge in orthopedic surgery. While regenerative engineering has advanced the field greatly using a combination of biomaterial scaffolds and stem cells, one matter of difficulty is inducing osteogenesis in these cells. Recent works have shown electricity’s ability to promote osteogenesis in stem cell lines when seeded in bone scaffolds; however, typical electrical stimulators are either (a) externally housed and require overcomplex percutaneous wires be connected to the implanted scaffold or (b) implanted non-degradable devices which contain toxic batteries and require invasive removal surgeries.

Objective: Here, we establish a biodegradable, piezoelectric …

Analytical And Experimental Study Of Laser Cladding Of Ni/Wc Metal Matrix Powders Reinforced With Rare Earth Elements Using A High Power Direct Diode Laser, Mohammed Sayeed

Mechanical Engineering Research Theses and Dissertations

The corrosion and wear are major limiting factors for steel in the harsh environments and can be controlled by depositing protective passive coatings. Nickel based alloy cladding of steel offers a solution by enabling better corrosion and wear resistance, and high bonding strength. The laser surface cladding of steel was conducted using a high power direct diode laser. Layers of tungsten carbide in Ni (40%Ni-60%WC) combined with 1% and 2% Lanthanum Oxide (La₂O₃) and Cerium Oxide (CeO₂) were deposited on ASTM A36 steel substrate. The X-ray diffraction and scanning electron microscopy were employed to …

Application Of Computational Tools To Spaghetti-Based Truss Bridge Design, Jin Xu, Jiliang Li, Nuri Zeytinoglu, Jinyuan Zhai

ASEE IL-IN Section Conference

Application of Computational Tools to Spaghetti-Based Truss Design

Statics and Strength of Materials are two foundational courses for Mechanical/Civil Engineering. In order to assist students in better understanding and applying concepts to a meaningful design task, SolidWorks and theoretical calculation were used for a spaghetti-bridge design contest with the constraints of given maximum weight and allowable support-material weight. As the first step of this iterative designing process, both extrude feature and structural member were introduced to model planar bridge trusses. Then SolidWorks’ Statics module was used to run FEA analysis of the structural performance in efforts to optimize the …

Design Of A Carburizing Treatment Of Steel Base Gear In The Materials Science Course, Jiliang Li, Jin Xu, Nuri Zeytinoglu, Jinyuan Zhai

ASEE IL-IN Section Conference

Diffusion PDE Application to Carburizing Treatment of Steel Base Gear

An introductory materials-science course is required in the mechanical engineering curriculum of many universities. This article describes an example effort to incorporate programming, diffusion transfer, heat treatment process and mechanical-property determination as an integral part of the materials-science course instruction. This effort was undertaken in order to give students additional experience in Fick’s 1^st and 2^nd laws and in-depth understanding of physics and mathematics involved in diffusion analysis. We chose to focus on Fick’s second law because its applications are not restricted to the materials-science field [1]. As …

Microwave Self-Healing Technology As Airfield Porous Asphalt Friction Course Repair And Maintenance System, Amir Tabakovic, Declan O'Prey, Drew Mckenna, David Woodward

Research and Innovation - Articles

A problem increasingly faced by airport authorities is the maintenance of runways. Due to their large aircraft loadings associated with take-off and landing operations, runways experience surface deterioration. Poor quality runway surfaces cannot be tolerated in such an environment. Maintenance issues must be carried out to maximise safety and minimise the risk of aircraft damage. A recent development has been the introduction of self-healing technologies such as rejuvenator encapsulation, induction and microwave heating to address these issues. This paper summarises a laboratory investigation to determine the effectiveness of microwave self-healing for crack repair of Porous Friction Course (PFC) used for …

Stair Climbing Hand Truck, James Mcpherson

All Undergraduate Projects

Abstract

Getting a heavy object up a flight of stairs usually requires a team of two or more people. Even with a team of people, the task is often still difficult, dangerous, and possibly insurmountable by one person. This problem is especially prevalent in for those who are moving into apartment complexes. Most apartment complexes have many buildings with two or more floors of living quarters, and elevators are often missing. This project sought to offer a solution to this problem. The solution in question; a motorized hand-truck with 2, trigonal planar pinwheels in place of the stock wheels. The …

Autojack - Hydraulic Powertrain System, Tyce Vu

All Undergraduate Projects

A primary problem for mechanics and automotive enthusiasts is the risk associated with lifting and securing a vehicle with conventional jack stands. Often times, improper jack-stand installation results in the vehicle collapsing unexpectedly, causing injury and/or death. This problem can be minimized through the application of a newly re-designed vehicle lifting system. The conventional method for lifting cars is time consuming and can be unsafe in many circumstances. A better, safer, and more efficient lift design was needed; the AutoJack. The approach of the AutoJack design was entirely focused on the safety of lifting a vehicle. Safety was improved by …

3d Textile Preforms And Composites For Aircraft Strcutures: A Review, Abbasali Saboktakin

International Journal of Aviation, Aeronautics, and Aerospace

Over the last decades, the development of 3D textile composites has been driven the structures developed to overcome disadvantages of 2D laminates such as the needs of reducing fabrication cost, increasing through-thickness mechanical properties, and improving impact damage tolerance. 3D woven, stitched, knitted and braided preforms have been used as composites reinforcement for these types of composites. In this paper, advantages and disadvantages of each of them have been comprehensively discussed. The fabric architects and their specification in particular stitched preforms and their deformation mode for aerospace applications have been reviewed. Exact insight into various types of damage in textile …