Mechanical Engineering Commons^™

Numerical Simulation Of Natural Convection In Rectangular Enclosures Of Varying Aspect Ratios And Its Feasibility In Environmental Impact Management Studies, Charles R. Walker

College of Graduate Studies: Theses & Dissertations

Author's abstract: Numerical simulation was used to investigate natural convection in horizontal and vertical enclosures with and without an internal heat source. Natural convection in rectangular enclosures is found in many real-world applications. Included in these applications are the energy efficient design of buildings, operation and safety of nuclear reactors, solar collector design, passive energy storage, heat transfer across multi-pane windows, thermo-electric refrigeration and heating devices, and the design-for-mitigation of optical distortion in large-scale laser systems. Considering all these applications, especially controlling heat transfer in nuclear power plants, knowledge and research results of natural convection in enclosure play a vital …

Introducing Fly Ash Into Lsi's Recipe, Andrew Mathias Beckrich

All Graduate Theses, Dissertations, and Other Capstone Projects

There has been published data that states that concrete producers can use Fly Ash as an alternative to Portland cement and still generate similar or better strength properties. By applying these principles to our industry and products, what new processes will need to be put in place and followed? What is the correct combination/portion of Fly Ash that will produce similar and better results as well as the adjusted new recipes? What type of cost is associated with the introduction of this new ingredient? Lastly, how does this affect the quality and reputation of the product?

Surface Wetting And Friction Studies Of Nano-Engineered Surfaces On Copper Substrate, Julius Sheldon Morehead

Graduate Theses and Dissertations

Nano-engineered-textures on a material surface can dramatically improve the wetting and non-wetting properties of a surface, and they also show promise to address friction issues that affect surfaces in contact. In this work, aluminum-induced crystallization (AIC) of amorphous silicon (a-Si) was used to produce nano-textures on copper (Cu) substrates. A study was performed to examine the effects of changing the annealing conditions and a-Si thickness on nano-texture formation. The creation of various nano-topographies and chemically modifying them using octafluorocyclobutane (C4F8) was performed to control hydrophilicity, hydrophobicity, and oil affinity of nano-textured surfaces. A video-based contact angle measurement system was used …

Mechanical Behavior Of Alloy 230 At Temperatures Relevant To Ngnp Program, Sudin Chatterjee

UNLV Theses, Dissertations, Professional Papers, and Capstones

Identification and selection of suitable structural materials for heat exchanger application within the purview of the next generation nuclear plant (NGNP) program constitute a major challenge. This challenge stems from the lack of many desired metallurgical and mechanical properties of conventional metallic materials and alloys for applications at temperatures approaching 950 oC. Nickel (Ni)-base Alloy 230 has been highly recommended as a suitable structural material for such application due to its excellent resistance to high-temperature plastic deformation and superior corrosion resistance in many hostile environments. Systematic studies on tensile, fracture toughness, creep, stress-rupture and creep-fatigue behavior of this alloy have …

Studies Of Dynamic Crack Propagation And Crack Branching With Peridynamics, Youn Doh Ha, Florin Bobaru

Department of Engineering Mechanics: Faculty Publications

In this paper we discuss the peridynamic analysis of dynamic crack branching in brittle materials and show results of convergence studies under uniform grid refinement (m-convergence) and under decreasing the peridynamic horizon (δ-convergence). Comparisons with experimentally obtained values are made for the crack-tip propagation speed with three different peridynamic horizons.We also analyze the influence of the particular shape of themicro-modulus function and of different materials (Duran 50 glass and soda-lime glass) on the crack propagation behavior. We show that the peridynamic solution for this problem captures all the main features, observed experimentally, of dynamic crack propagation and branching, as well …

Design And Development Of Rapid Battery Exchange Systems For Electric Vehicles To Be Used As Efficient Student Transportation, Jonathan A. Bevier

Master's Theses

Rapid battery exchange systems were built for an electric van and pedal assist electric bike as a method of eliminating the need to recharge the vehicles batteries in order to increase the feasibility of using electric propulsion as a method of efficient student transportation. After selecting proper materials it was found that the systems would need a protective coating to ensure consistent operation. 1020 cold rolled steel samples coated with multiple thicknesses of vinyl resin paint, epoxy resin paint, and powder coating were subjected to environmental wear tests in order to determine if the type and thickness of common protective …

Multiscale Modeling Of Impact On Heterogeneous Viscoelastic Solids With Evolving Microcracks, Flavio V. Souza

Department of Engineering Mechanics: Dissertations, Theses, and Student Research

Multiscale computational techniques play a major role in solving problems related to viscoelastic composite materials due to the complexities inherent to these materials. In the present work, a numerical procedure for multiscale modeling of impact on heterogeneous viscoelastic solids containing evolving microcracks is proposed in which the (global scale) homogenized viscoelastic incremental constitutive equations have the same form as the local scale viscoelastic incremental constitutive equations, but the homogenized tangent constitutive tensor and the homogenized incremental history dependent stress tensor depend on the amount of damage accumulated at the local scale. Furthermore, the developed technique allows the computation of the …

Detection Of Voids In Prestressed Concrete Bridges Using Thermal Imaging And Ground-Penetrating Radar, David G. Pollock, Kenneth J. Dupuis, Benjamin Lacour, Karl R. Olsen

Faculty Publications - Biomedical, Mechanical, and Civil Engineering

Thermal imaging and ground-penetrating radar was conducted on concrete specimens with simulated air voids. For the thermal imaging inspections, six concrete specimens were constructed during the month of June 2007 to simulate the walls of post-tensioned box girder bridges. The objective was to detect simulated air voids within grouted post-tensioning ducts, thus locating areas where the post-tensioning steel strands are vulnerable to corrosion. The most important deduction taken from these inspections was that PT-ducts and simulated voids were more detectable in the 20 cm (8 in.) thick specimens than in the 30 cm (12 in.) thick specimens. While inspections of …

Impact Of A Microwave Curing Process On Tensile Strength Of Selected Carbon Fiber Composites, Brian B. Balzer

All-Inclusive List of Electronic Theses and Dissertations

The traditional process for curing carbon fiber (CF) composites has been the autoclave system. A review of recent research indicates curing CF composites in a microwave oven has the potential for reducing processing time. The problem statement of the experimental study was that the impact of a microwave curing process on tensile strength of selected CF composite specimens was unknown. The research study describes the statistical procedure and analysis of data to answer the specific question for the experimental trials: What is the effect on the tensile strength of cured CF composite samples due to the relationship of the autoclave …

Iii Finishing, Lapping, Honing And Polishing: Processes, Characterisation And Novel Techniques-Experimental Research On Ultra-Smooth Surface Polishing Based On Two-Dimensional Vibration Of Liquid, Zhong Ning Guo, X. Z. Huang, Z. G. Huang, Z. Q. Yu, T. M. Yue, Wing Bun Lee

Faculty Publications

No abstract provided.

Validation Of Finite Element Beam Models, Pavan R. Madhineni

Mechanical & Aerospace Engineering Theses & Dissertations

Finite Element (FE) methods these days are becoming very popular to predict the responses of structures in industries, such as the aerospace and automobile industries. When there is a new design or modification of an existing design, the product must be tested to fulfill the criterion projected by the industry or external agencies before it can be launched. The product must be checked for each and every aspect, and every minute detail of each of the external forces. Hence, it becomes very important to carry out the model validation on the product.

This thesis describes validation of finite element (FE) …

Residual Stress Characterization In Structural Materials By Destructive And Nondestructive Techniques, Ajit K. Roy, Anand Venkatesh, Vikram Marthandam, Satish Dronavalli, Douglas P. Wells, Ronald Rogge

Mechanical Engineering Faculty Research

Transmutation of nuclear waste is currently being considered to transform long-lived isotopes to species with relatively short half-lives and reduced radioactivity through capture and decay of minor actinides and fission products. This process is intended for geologic disposal of spent nuclear fuels for shorter durations in the proposed Yucca Mountain repository. The molten lead-bismuth-eutectic will be used as a target and coolant during transmutation, which will be contained in a subsystem vessel made from materials such as austenitic (304L) and martensitic (EP-823 and HT-9) stainless steels. The structural materials used in this vessel will be subjected to welding operations and …

Mechanics Of Composite Materials In Fuel Cell Systems, Kenneth Reifsnider, Xinyu Huang, G. Ju, Matthew Feshler, K. An

Faculty Publications

The science and technology that are fundamental to the concept of composite materials are also the foundation for the construction and function of fuel cells and fuel cell systems. The present paper outlines this relationship in the context of the physics and chemistry that are enabled by the specific selection and arrangement of constituents of the “functional composite” fuel cell. General principles of operation are described, and fundamental issues are defined that must be addressed by the composites community if the fuel cell science and engineering is to advance. Examples of several types of functional composite fuel cells are presented, …

Nitriding Of Titanium By Inductively Coupled Plasma, Abdul Hakim Hashim

Student Works (2000-2009)

A RF planar coil inductively coupled plasma syslem (ICP) is used in this project to nitride a commercially pure titanium substrate. The system is powered by a 600 W, 13.56 MHz, 50 Ω RF generator. The impedance matching is achieved by using an air­-core step-down transformer and a tunable vacuum capacitor. The electrical discharge characteristics of argon and argon-nitrogen admixture plasmas are investigated. Coil current, ion density and RF power transferred in the plasma at different pressure are studied. Nitriding of titanium using the system is found to be able to produce θ-TiN, ε-Ti2N and α-Ti(N) layers, as confirmed by …

A Substructuring Technique With Application To Spot Weld Placement Design, Yang Wang

Mechanical & Aerospace Engineering Theses & Dissertations

It is quite common in the industry to use various interface methods, such as welding, fasteners, bolts, adhesive bonding, etc., to join substructures together. The quality of the assembled structure is directly related to the type of the interface methods used in the manufacturing process. Thus, it is important to include the interface conditions as part of design variables in any design process. To this end, this work develops a reanalysis method that can efficiently analyze structures with variations on the interface conditions. This reanalysis method is based upon a new two-step substructuring technique. The first step performs substructural level …

Application Of Dynamic System Identification To Timber Beams - Part I, S T. Peterson, D I. Mclean, M D. Symans, David Pollock, W F. Cofer, R N. Emerson, Kenneth J. Fridley

Faculty Publications - Biomedical, Mechanical, and Civil Engineering

In this first part of a two-part paper, development of a method of dynamic system identification for timber beams is presented with an analytical verification of the method using a finite-element model. A method of global nondestructive evaluation for identifying local damage and decay in timber beams is investigated in this paper. Experimental modal analysis is used in conjunction with a previously developed damage localization algorithm. The damage localization algorithm utilizes changes in modal strain energy between the mode shapes of a calibrated model, representing the undamaged state of the beam of interest, and the experimentally obtained mode shapes for …

Application Of Dynamic System Identification To Timber Beams - Part Ii, S T. Peterson, D I. Mclean, M D. Symans, David Pollock, W F. Cofer, R N. Emerson, Kenneth J. Fridley

Faculty Publications - Biomedical, Mechanical, and Civil Engineering

In a companion paper, a method of global nondestructive evaluation (NDE) for identifying local damage and decay in timber beams was developed and verified analytically using a finite-element model of a timber beam. The previously presented method of damage localization employs experimental modal analysis and an algorithm that monitors changes in modal strain energy between the mode shapes of a damaged beam with respect to the undamaged state of the beam. In this second part of a two-part paper, experimental laboratory tests on simply supported timber beams are presented to verify the capabilities and determine the limitations of the proposed …

Lateral Resistance Of Ring-Shank Nail Connections In Southern Pine Lumber, R D. Theilen, D A. Bender, David Pollock, S G. Winistorfer

Faculty Publications - Biomedical, Mechanical, and Civil Engineering

Ring-shank nails are used in engineered structures with lateral connection design values based on theoretically derived equations which were validated only for common nails. The goal of this study was to quantify the input parameters and lateral connection strength of several types of ring-shank nails in Southern Pine lumber and critically evaluate the applicability of the theoretical equations for ring-shank nails.

Two sizes of galvanized and ungalvanized, hardened steel ring-shank nails from two manufacturers were studied. The hardened, ring-shank nails carried significantly higher loads than the common wire nails studied. Because the current method of determining yield load does not …

Withdrawal Strength Of Ring-Shank Nails Embedded In Southern Pine Lumber, M J. Skulteti, D A. Bender, S G. Winistorfer, David Pollock

Faculty Publications - Biomedical, Mechanical, and Civil Engineering

Ring-shank nails are used extensively in post-frame construction due to their superior performance, yet surprisingly little testing has been done on nail sizes above 12d. Experience in the post-frame industry suggests that published allowable design values for ring-shank nails may be overly conservative and need revision. The goal of the research reported herein was to characterize the withdrawal strength of ring-shank nails embedded in Southern Pine lumber. Three sizes ofgalvanized and ungalvanized (bright) ring-shank nails from two manufacturers were studied. Ring-shank nails had approximately twice the withdrawal resistance of smooth-shank nails of the same diameter. Galvanizing slightly reduced withdrawal strength …

Threaded-Nail Fasteners - Research And Standardization Needs, B L. Wills, S G. Winistorfer, D A. Bender, David Pollock

Faculty Publications - Biomedical, Mechanical, and Civil Engineering

Threaded nail fasteners are commonly used in agricultural and commercial post-frame structures, yet there has been insufficient research to fully understand the effect of threads on withdrawal and lateral load resistance. The objective of this article is to review technical information on threaded nail fasteners and to identify problems facing manufacturers, designers, and users of threaded nail fasteners for engineering applications. Recommendations are given concerning research and standardization needs.

Superplastic Forming System Design, Keith Bain

Honors Capstone Projects and Theses

No abstract provided.

Finite Element Analysis Of Structures With Constrained Viscoelastic Layer Damping, Yung Chen

Mechanical & Aerospace Engineering Theses & Dissertations

It has been demonstrated that constrained viscoelastic layer damping treatments provide an effective means of passive control for structural vibration. These treatments dissipate vibrational energy by inducing shear strain in a thin layer of viscoelastic material. Our interest is in adding passive damping to a structure as an augmentation to active control. For such applications it is desirable to achieve high damping performance in a given frequency range with a minimum of added weight. Most damping treatments employ spatially continuous constraining layers over the entire viscoelastic layer. Plunkett and Lee have shown that the effectiveness of the damping treatment can …

A Systematic Procedure For The Analysis And Design Of Deployable Space Structures, Praveen Kumar

Mechanical & Aerospace Engineering Theses & Dissertations

An integrated graph theory and a symmetry-based approach have been developed for the type synthesis of deployable truss structures. Using this systematic approach, a bay of a deployable structure may be looked upon as being built around an axis or a plane of symmetry, including anti-symmetry. By providing a fictitious joint along this axis, the problem of structural design and analysis can be reduced to the study of one plane or face of the given structure. Each face is considered to be an assemblage of structural links connected by joints which form a closed kinematic chain. The conventional graph representation …

Kentucky Building Code 1980, Kentucky Library Research Collections

Research Collections

Kentucky Building Code (KBC) is the official referenced standards to ensure that a building is constructed in accordance with the approved construction documents.

Direct Design Of A Portal Frame, Angel Fajardo Ugaz

Dissertations and Theses

This investigation was undertaken to develop plastic design aids to be used in the direct design of optimum frames. It uses the concept of minimum weight of plastically designed steel frames, and the concept of linear programming to obtain general solutions. Among the special characteristics of this study are: A. The integration of both gravity and combined loading conditions into one linear programming problem. B. The application of the revised simplex method to the dual of a parametric original problem. C. The application of A and B above in the development of design aids for the optimum design of symmetrical …