Mechanical Engineering Commons^™

Study On Predictive Maintenance Of V-Belt In Milling Machines Using Machine Learning, Reza Aulia Rahman, Mohammad Faishol Erikyatna, Achmad Fauzan Hery Soegiharto

Journal of Mechanical Engineering Science and Technology (JMEST)

Towards industry 4.0, monitoring the degradation of machine tools’ components becomes a key feature so that smooth productivity is achieved. To preserve the functionality and performance of the machine tools, proper maintenance activities must be planned and carried out. V-belt is important component in machine tools that transmits power from the electric motor spindle in order to machine to work and cut desired material properly. The purpose of this research is to develop a predictive maintenance system for v-belt milling machine Krisbow 31N2F using machine learning. The machine learning algorithm models using multiple and simple linear regression algorithm was developed …

True Stress-Strain Behavior Of Al-Based Cast Automotive Alloy Under Different Ageing Conditions And The Effect Of Trace Zr, Mashiur Rahman Shoummo, Akib Abdullah Khan, Mohammad Salim Kaiser

Journal of Mechanical Engineering Science and Technology (JMEST)

A thorough investigation has been carried out on the Al-12Si-1Mg-1Cu-1Ni automotive alloy considering different properties, specially mechanical properties associated with true stress and true strain with Zr addition of trace amount. A commercially available piston is melted to produce the alloy, and trace amount of Zr is added to make another. The base alloy along with the Zr added alloy had been applied to homogenization, solution treatment, quenching, and ageing in order to get the age-hardening response. The alloys have been heat-treated at 25 ºC, 200 ºC, and 300 ºC, respectively, for four hours for attaining the under, peak and …

Effect Of Graphene Addition On Bacterial Cellulose-Based Nanocomposite, Jibril Maulana, Heru Suryanto, Aminnudin Aminnudin

Journal of Mechanical Engineering Science and Technology (JMEST)

Bacterial cellulose (BC) is a widespread, low-cost biopolymer that has generally been produced from plants and biomass waste. A method for improving the range of applications for bacterial cellulose is adding graphene material. It has an outstanding feature that can increase the performance of nanocomposite materials. The research aims to observe the effect of graphene on the surface morphology, crystallinity, chemical bonding, and tensile strength of BC/CuO nanocomposite. For this study's synthesis, BC was synthesized by fermenting pineapple peel extract for 10 to 14 days. The produced BC was crushed, homogenized with a nano homogenizer machine, and filtered. Filtered BC, …

Material Characterization And Comparison Of Sol-Gel Deposited And Rf Magnetron Deposited Lead Zirconate Titanate Thin Films, Katherine Lynne Miles

Mechanical Engineering ETDs

Lead zirconate titanate (PZT) has been a material of interest for sensor, actuator, and transducer applications in microelectromechanical systems (MEMS). This is due to their favorable piezoelectric, pyroelectric and ferroelectric properties. While various methods are available to deposit PZT thin films, radio frequency (RF) magnetron sputtering was selected to provide high quality PZT films with the added capability of batch processing. These sputter deposited PZT films were characterized to determine their internal film stress, Young’s modulus, composition, and structure. After characterization, the sputtered PZT samples were poled using corona poling and direct poling methods. As a means of comparison, commercially …

A Machine Learning Approach To Robotic Additive Manufacturing Of Uv-Curable Polymers Using Direct Ink Writing, Luis A. Velazquez

LSU Master's Theses

This thesis presents the design and implementation of a robotic additive manufacturing system that uses ultraviolet (UV)-curable thermoset polymers. Its design considers future applications involving free-standing 3D printing by means of partial UV curing and the fabrication of samples that are reinforced with fillers or fibers to manufacture complex-shape objects.

The proposed setup integrates a custom-built extruder with a UR5e collaborative manipulator. The capabilities of the system were demonstrated using Anycubic resin formulations containing fumed silica (FS) at varying weight fractions from 2.8 to 8 wt%. To fully cure the specimens after fabrication, a UV chamber was used. Then, measurements …

Sculpting Charge In Graphene Through Patterned Strain, Dylan J. Balter, Jenna Smith

The Journal of Purdue Undergraduate Research

No abstract provided.

Processing Of Plastic Film From Potato Starch: Effect Of Drying Methods, Kourtney Collier, Samantha Goins, Austin Chirgwin, Isabelle Stanfield

The Journal of Purdue Undergraduate Research

Starch-based plastics are biodegradable, compostable compounds made of starch and plasticizers from natural sources. Their fabrication involves the starch-plasticizer reaction at 70–100°C followed by cooling and drying. Th e most common drying method is air drying (natural convection), which is effective but slow. Th e objective of this work is to study the effect of fast drying (forced convection) on the quality of the plastic film. Th is work compares the effects of drying conditions and drying rate on warpage, shrinkage rate, and presence of bubbles. Five drying methods are studied: (1) natural convection with uncovered petri dish, (2) natural …

Design And Development Of A Multi-Material, Cost-Competitive, Lightweight Mid-Size Sports Utility Vehicle’S Body-In-White, Amit M. Deshpande, Rushabh Rajesh Sadiwala, Nathan Brown, Sai Aditya Pradeep, Leon M. Headings, Ningxiner Zhao, Brad Losey, Ryan Hahnlen, Marcelo J. Dapino, Gang Li, Srikanth Pilla

Publications

Vehicle light-weighting has allowed automotive original equipment manufacturers (OEMs) to improve fuel efficiency, incorporate value-adding features without a weight penalty, and extract better performance. The typical body-in-white (BiW) accounts for up to 40% of the total vehicle mass, making it the focus of light-weighting efforts through a) conceptual redesign b) design optimization using state-of-the-art computer-aided engineering (CAE) tools, and c) use of advanced high strength steels (AHSS), aluminum, magnesium, and/or fiber-reinforced plastic (FRP) composites. However, most of these light-weighting efforts have been focused on luxury/sports vehicles, with a relatively high price range and an average production of 100,000 units/year or …

Impulse, Fall 2022, University Marketing And Communications, Jerome J. Lohr College Of Engineering

Impulse (Jerome J. Lohr College of Engineering Publication)

2 | Sanjeev Kumar Takes Helm as College’s 12th Dean
5 | College Develops Partnerships in India, Turkey
6 | Faculty News
8 | Aerofly — Profs, Alum Partner To Build Unique Drone
10 | Researchers Find Way to Extend Produce Shelf Life
12 | SDSU Claims National Title in Quarter-Scale Tractors
14 | Nation’s Top ASCE Chapter Housed at SDSU
16 | National Geo-Video Title Won By State Students
18 | Summer Brings Engineering Camps to Campus
20 | Haleigh Timmer — Money on the Court, In Classroom
22 | Daniel Burkhalter — Day in the Life of Student-Athlete …

Additive Manufacturing Of Complexly Shaped Sic With High Density Via Extrusion-Based Technique – Effects Of Slurry Thixotropic Behavior And 3d Printing Parameters, Ruoyu Chen, Adam Bratten, Joshua Rittenhouse, Tian Huang, Wenbao Jia, Ming-Chuan Leu, Haiming Wen

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Additive manufacturing of dense SiC parts was achieved via an extrusion-based process followed by electrical-field assisted pressure-less sintering. The aim of this research was to study the effect of the rheological behavior of SiC slurry on the printing process and quality, as well as the influence of 3D printing parameters on the dimensions of the extruded filament, which are directly related to the printing precision and quality. Different solid contents and dispersant- Darvan 821A concentrations were studied to optimize the viscosity, thixotropy and sedimentation rate of the slurry. The optimal slurry was composed of 77.5 wt% SiC, Y2O3 and Al2O3 …

Investigation Of Adhesion, Deformation Mechanics, And Electrical Properties Of Ag/Sio2/Pdms Tri-Layers For Stretchable Electronic Applications, Rhandy Joe Paladines

Theses and Dissertations

The motivation behind this research is to improve the interfacial layer bonding of metallic thin films to PDMS substrates with the aid of a buffer layer. The physical vapor deposition (PVD) technique of sputtering was used to deposit bilayer thin films of silver (Ag) and silicon dioxide (SiO2) on PDMS. Two chamber pressures were used in this work, 5 and 20 mTorr, to investigate the role of this parameter in determining the interfacial adhesion and the role in determining the resistance sensitivity. Studies of the surface energy and increased bonding strength for metallization are carried out. Surface characterization using atomic …

Effect Of Degradation Of Methylene Blue Dye (Mb) By Using Erbium Oxide (Er2o3) Nps, Hind Ahmed Jasim, Farah Farman Abbass, Sarah A. Hamood, Hind Mohammed Hassan, Mohammed Sellab Hamza

Al-Esraa University College Journal for Engineering Sciences

In an experiment investigating the photo catalytic degradation of methylene blue using varied concentrations of Er2O3 nanoparticles, different conditions were tested including with and without sunshine, as well as in the absence of a UV source. The presence of a UV source was also considered in the research. UV-Visible spectroscopy was utilized to characterize the catalysts. The degradation of methylene blue dye was monitored by spectrophotometry by tracking dye absorbance at regular time intervals and adjusting the dye concentration. The results indicated that the most effective degradation of methylene blue dye occurred during a 5-hour irradiation time and in the …

Architecture Between Development And Ability Programs, Allaa Ahmed Rasheed, Ibrahim Jawad Kadhim

Al-Esraa University College Journal for Engineering Sciences

The development of architecture and its pursuit of perfection can only be achieved through society to reach a specific result when meeting new desires that arise as a result of human development, expanding individual and societal needs, and deepening their relationships in multifaceted ways. The research focuses on development as it requires a clear cumulative vision of the integrative relationship between practice and participation in interpreting the act (effect) from the force (influence). It emphasizes that the power of capabilities is understood through learning and education in describing the capabilities of architecture. This involves adopting new ideas and intellectual premises …

The Designing Of Contemporary Teaching- Learning Spaces According To Interactive Flow Action Local School Spaces-A Case Study, Aseel Jasem Al-Ataby, Anwar Subhi Ramadan Al-Qaraghuli

Al-Esraa University College Journal for Engineering Sciences

The world today faces many challenges related to environmental issues, as well as other social and economic challenges, and in light of intellectual, cognitive, and technical transformations, which led to the emergence of many new phenomena and concepts that correspond to them, including the concept of flow. This concept has been associated with many aspects of life, including architecture, whose importance has emerged recently in light of the challenge of the spread of the Corona virus and its effects on architecture with its residential, educational, and other spaces. This research focuses on the flow in the architectural space in general, …

A New Compact Triple-Band Micro-Strip Monopole Antenna Based On Minkowski Fractal Geometry, Hayder S. Ahmed, Zahra' Salah Ahmed, Sarah A. Hamood, Mohammed Sellab Hamza, Taha A. Elwi

Al-Esraa University College Journal for Engineering Sciences

Wireless communication systems have made significant advancements in size reduction, with antenna terminals remaining a primary challenge for system compatibility. As a result, much of industrial research is focused on antenna miniaturization in wireless systems. In this work, a novel compact Triple-Band Fractal (TBF) antenna is proposed, utilizing three coupling fractal patches with varying iteration levels of Minkowski geometry to provide three resonant bands. The antenna design is implemented using an antenna substrate with a dielectric constant of 10.8 and a thickness of 1.27 mm within the CST Microwave Studio environment. The zero iteration patch resonator is responsible for the …

The Role Of Community Participation In The Architectural Production, Allaa Ahmed Rasheed, Ibrahim Jawad Kadhim

Al-Esraa University College Journal for Engineering Sciences

The role of community participation as a power in building architectural output at the level of the act of thinking in architecture and the design process in non-existence is related to power and presence with act. The research is concerned with expanding knowledge in the direction of the holistic language and searching for the role that builds the privacy of the architectural product versus the community's societal identity. It studies the concept of act within the limits of existence at the level of community participation since the act of architecture is the act of man to meet certain needs and …

The Communicative Deviation In Contemporary Architectural Production, Haneen Hosham Abd-Alrahman, Panrizat Q. Hussein Fehmi

Al-Esraa University College Journal for Engineering Sciences

Deviation is one of the most important concepts discussed in various architectural and non-architectural theses when addressing the topic of creative production. It involves breaking away from the familiar and surpassing established architectural rules to create unique and excellent products that are characterized by their creativity and aesthetic appeal. Recognizing the significance of this concept in shaping contemporary architectural production, the research endeavors to explore the concept of connective displacement in architecture and delve into its essential aspects. The research identifies the research problem as the "cognitive deficiency surrounding connective displacement in the semantic structures embedded in architecture." The objective …

Developed Rc4 Algorithm With Double Reverse For Better Data Protect, Fouad Sahib Muhamed Alkhazraji

Al-Esraa University College Journal for Engineering Sciences

Computer security plays a crucial role in protecting users' data, and cryptographic techniques are commonly used for this purpose. Encryption is a method employed to ensure data confidentiality, whether it is stored on hard drives or transferred through various media. RC4 (Rivest Cipher 4) is a cryptographic algorithm that utilizes the same key for both encryption and decryption processes. It falls under the category of stream ciphers, which are widely utilized in numerous protocols due to their flexibility and speed. RC4 employs XOR (exclusive OR) function to implement its encryption and decryption steps. In this paper, a technique known as …

Developing Scaling Laws To Predict Compressive Mechanical Properties And Determine Geometrical Parameters Of Modified Bcc Lattice Structures, Hasanain Abdulhadi, Abdalsalam Fadeel, Tahseen A. Alwattar, Ahsan Mian

Mechanical and Materials Engineering Faculty Publications

The objective of this study is to develop generalized empirical closed-form equations to predict the compressive mechanical properties and determine geometrical parameters. To achieve that, 117 models are built and analyzed using ABAQUS/CAE 2016 to provide two types of reliable data: one for lattice mechanical properties based on finite element method and the other for geometrical parameters using the measurements of ABAQUS diagnostic tool. All the models are created by modifying the basic feature of body-centered cubic lattice structure based on a range of strut angles, a set of relative densities, and two design sets. Also, the influence of lattice …

Improved Additive Manufacturing Of Silicon Carbide Parts Via Pressureless Electric Field-Assisted Sintering, Adam Bratten, Ruoyu Chen, Joshua Rittenhouse, Ming-Chuan Leu, Haiming Wen

Mechanical and Aerospace Engineering Faculty Research & Creative Works

High solids loading silicon carbide (SiC)-based aqueous slurries containing only.5 wt. % organic additives were utilized to create specimens of various geometries via an extrusion-based additive manufacturing (AM) technique. Pressure less electric field-assisted sintering was performed to densify each specimen without deformation. The combination of these techniques produced parts with >98% relative density despite containing only 5 wt.% oxide sintering additives. After sintering, specimens contained only the α-SiC and yttrium aluminum perovskite phases. This suggests the evolution of a nonequilibrium yttrium aluminate phase, as well as transformation from β-SiC to α-SiC. The fabrication method presented in this work has advantages …

Evaluation Of Material Request Order To Support Sustainable Construction, Fajar Susilowati, Nur Nahdiah Anggraeni

Makara Journal of Technology

This study was conducted on one of Indonesia’s apartment projects, in which reinforced concrete is the main structure. Based on existing project data, this project experienced a decline in the construction work’s progress, thus reducing the project’s overall progress. This decline occurred because the delivery of concrete reinforcement material was delayed. This study aimed to determine the process of material request order and its relationship with the work implementation, as well as the factors that influenced the delayed arrival of concrete reinforcement material at the project site. The method used in this study was observation and interview. Data were analyzed …

Scaling Cellular Agriculture Production With Photolithography: A Study On Curing And Degradation, Alexis Garrett

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

To meet the requirements for full production in cellular agriculture, a multi-disciplinary approach is required. New questions and understandings between different concepts, such as texture and cooking, need to be identified and how they correlate with cellular behavior and taste. This work focuses on understanding and developing photolithographic systems for scalable cellular agriculture. There were two specific research directions: 1) a traditional photolithography printing system was improved upon for mass manufacturing purposes and 2) mechanical analysis and degradation of key potential photolithographic biomaterials were tested for a food product. A novel digital rotational ultraviolet manufacturing (DRUM) process was developed, and …

Removal Of Selenium And Heavy Metals From Coal Combustion Residuals Wastewater Using Surface Modified Iron Based Media, Madan Tandukar, Alex Korff, Andrew Vincent, Chris Hardin

World of Coal Ash Proceedings

No abstract provided.

Contents, Jaka Fajar Fatriansyah

Journal of Materials Exploration and Findings

No abstract provided.

Preface Of Volume 1 Issue 1 On Journal Of Materials Exploration And Findings (Jmef), Jaka Fajar Fatriansyah

Journal of Materials Exploration and Findings

No abstract provided.

The Optimization Of Failure Risk Estimation On The Uniform Corrosion Rate With A Non-Linear Function, Fernanda Hartoyo, Jaka Fajar Fatriansyah, Imam Abdillah Mas'ud, Farhan Rama Digita, Hanna Ovelia, D. Rizal Asral

Journal of Materials Exploration and Findings

Failures in the oil and gas pipeline system are conditions that must be avoided and anticipated because the losses due to the failures can occur at a very high level. Internal corrosion is one of the significant causes of the failures in pipeline systems. In addition, this type of corrosion is due to the high content of carbon dioxide and other corrosive substances in crude oil and natural gas. Therefore, an optimal inspection scheduling system is required to prevent the possibility of pipeline failures due to corrosion and to avoid any overspending on the budget due to excessive inspection scheduling. …

Material Selection Of Below-Knee Leg Prosthetics, Raihan Kenji Rizqillah

Journal of Materials Exploration and Findings

The effort to select the best pylon material, part of below-knee leg prosthetic, has been performed. It begins with function analysis to generate design requirement, which concludes that the objective is to select material that gives proper mechanical properties with lowest weigth and cost. Constraint requirements eliminate unsuitable material. Material indices, a scoring function, are derived from objective with respect to a function, and used for ranking material candidates. Ranking from material indices gives top material candidates of woods. Al alloy, Mg alloy, and ferrous alloy. Further seek of documentation is undertaken by failure analysis, value analysis, fabrication, and environmental …

The Effect Of Sample Placement In The Furnace During The Heat Treatment Process Of 7075-T6 Aluminum Alloy On Microstructure, Hardness, And Electrical Conductivity, Donanta Dhaneswara, Hardi Rindharto, Muhammad Syauqi Aqilafif

Journal of Materials Exploration and Findings

This paper reports the effects of sample placement during the heat treatment on the microstructural morphology and mechanical properties of 7075 Al alloy such as hardness value and electrical conductivity. The material was in the formed of Al alloy sheets where samples were machined into a square with dimensions of 1.5 x 1.5 inch. The 7075-T0 Al alloy as samples were given heat treatment by precipitation hardening (aging) at temperature 120°C for 24 hours, so it becomes 7075-T6 Al alloy. Samples were subjected to some mechanical tests and the morphology of the resulting microstructures were characterized by optical microscopy. The …

Ferrous Alloy Manufacturing For The Martian Surface Through In-Situ Resource Utilization With Ionic Liquids Harvested Iron And Bosch Process Carbon, Blake C. Stewart

Theses and Dissertations

As research continues for the habitation of the Lunar and Martian surfaces, the need for materials for construction of structural parts, mechanical components, and tools remains as a major milestone. The use of in-situ resource utilization (ISRU) techniques is critical due to the financial, physical, and logistical burdens of sending supplies beyond low-Earth orbit. The Bosch process is currently in development as a life support system at the National Aeronautics and Space Administration’s (NASA) Marshall Space Flight Center (MSFC) to regenerate oxygen (O2) from metabolic carbon dioxide (CO2) with the byproduct of elemental carbon (C). The Bosch process presents a …

A Comparison Of Uniaxial Compressive Response And Inelastic Deformation Mechanisms In Freeze Cast Alumina-Epoxy Composites Without And With Rigid Confinement, Tareq Aljuhari

Mechanical & Aerospace Engineering Theses & Dissertations

Cellular ceramics have an array of improved mechanical properties that make them incredibly desired for different applications such as armor systems, aircraft structures, automobiles bumpers, and biomedical implants. It is also desirable that porous architecture could be shaped into bulk complicated shapes and easy to scale-up with low manufacturing cost. Despite several efficient techniques to fabricate cellular ceramics, some limitations are preventing us from meeting the high demand of the after mentioned applications. For that, freeze casting, also called ice-templating, is technique of solidifying an aqueous ceramic suspension under the effect of unidirectional temperature gradient. In this study, Ice-templated porous …