Mechanical Engineering Commons^™

An Investigation Into Energy-Material Properties Interaction In Additive Manufacturing Of Polymers., Pu Han

Electronic Theses and Dissertations

Additive manufacturing (AM), known as three-dimensional (3D) printing, is a fabrication process to build 3D objects layer by layer based on computer aided design (CAD) model or digital 3D model. Fused filament fabrication (FFF) has become a preferred method for additive manufacturing due to its cost-effectiveness and flexibility. However, the parts built using FFF process suffer from lower mechanical strength compared to that fabricated using traditional method and rough surface finish. With this motivation, this dissertation aims to develop and implement a novel in-process laser assisted technique on FFF to heal the microstructure of FFF built objects by enhancing reptation …

Digital Design And Thermomechanical Process Simulation For 3d Printing With Abs And Soyhull Fibers Reinforced Abs Composites., Saleh Khanjar

Electronic Theses and Dissertations

Recent demonstrations with fused filament fabrication (FFF) 3D printing have shown to produce prototypes as well as production components. Additionally, due to the FFF process platforms being low-cost and readily available there has been a high-demand to produce on-demand parts for various applications in automotive, in-space manufacturing and electronic industries. However, current limitations such as limited availability of advanced composites materials, and guidelines for design-for-manufacturing make the process prone to trial-and-error experiments both at the materials development, product design and manufacturing stage. In this work, new thermomechanical process simulations platform, Digimat-AM has been evaluated to address and demonstrate digital design …

Materials And Process Design For Ceramic Fused Filament Fabrication (Cf3) Of Hydroxyapatite., Kavish Sudan

Electronic Theses and Dissertations

Ceramic fused filament fabrication (CF3) enables the fabrication of highly customizable ceramic parts at relatively lower costs compared to other AM technologies. Advanced ceramics, having specific or niche applications, call for a high level of accuracy to meet the performance requirements. For achieving the desired level of accuracy in any manufacturing process, it is important to know the effect of involved parameters at different stages of fabrication. CF3 has been around for a while but there has been a severe lack of literature dealing with understanding the effect of process parameters on the final part properties. In this study, Hydroxyapatite …

Effect Of The Melt Pool Boundary Network On The Anisotropic Mechanical Properties Of Selective Laser Melted 304l, Myranda Spratt, Joseph William Newkirk, Okanmisope Fashanu, K. Chandrashekhara

Materials Science and Engineering Faculty Research & Creative Works

Anisotropic mechanical properties are a well-known issue in selective laser melted parts. The microstructure produced by selective laser melting (SLM) is directional, including the solidified melt pool structures and grains. This work investigates the melt pool boundary's effects on 304L stainless steel's compressive properties. 304L stainless steel solid cylinders were built using a pulse laser SLM machine in four directions using three hatch angle rotations: 0⁰, 67⁰, and 105⁰ . The twelve samples were compression tested, and the results were analyzed. Numerical models were also created with the different hatch angles and directions. The melt pool boundary network (MPBN) in …

Molecular Dynamics Study Of Atomic Diffusion In Cantor High Entropy Alloy In The Selective Laser Melting Process, Mathew Z. Farias

Theses and Dissertations

High entropy alloys (HEAs) are compositionally complex alloys that are comprised of 5 or more principle elements at near equimolar concentrations. The Selective Laser Melting (SLM) method generally melts pure elemental powders or prefabricated alloy powders, this process allows for the production of heterogeneous structures that would be difficult to create through more conventional means. In-situ alloying in SLM, or Laser Additive Alloying (LAA), using pure elemental powders is a promising means of producing what would otherwise be costly and difficult to fabricate products with less defects using prefabricated powders, therefore this new approach could enable the ability to …

Selective Laser Melting Of Titanium Diboride: A Study Of The Energy Density Effects, Lazaro Lopez Mendez

Theses and Dissertations

Natural titanium diboride (TiB2) has been reported the 5th hardest material on earth. Due to its superior properties, such as high density, high elastic modulus, and high compressive strength, TiB2 becomes one of the most suitable ceramic reinforcements for applications with severe friction and heavy loading conditions. This study is intended to produce TiB2 using 3D additive manufacture (AM) technology, and then to understand the tribological property of the AM fabricated TiB2 specimens. In this study, a laser additive alloying (LAA) process was developed based on a Renishaw AM laser system. One mm thick samples were prepared using the LAA …

Product Lifecycle Management - Application Of Patterning Methods To Gas Turbine Blades And Creation Of Learning Materials, David Procopio

All Theses

To compete in the global marketplace, companies need to embrace virtual design and manufacturing methods. Product Lifecycle Management (PLM) embodies both the workflow processes and tools to bring forth products from conception to design to fabrication to service to decommissioning, and to eventual recycling. In response to the growing demand for engineers and technicians with these critical skills, colleges and universities should introduce these virtual tools through seminars, software workshops, and computer laboratory sessions. Some of the opportunities in the PLM Center at Clemson University include short courses on PLM practices, focused software training sessions, hands-on exploration activities, and research …

Design And Fabrication Of A Polymer Fdm Printer Capable Of Build Parameter Monitoring And In-Sit Geometric Monitoring Via Photogrammetry, Travis Roberts

All Theses

Additive manufacturing, or 3D printing, is a complex process that creates free-form geometric objects by sequentially placing material in a location to construct an object, usually as a layer-by-layer process. One of the most widespread methods is Fused Deposition Modeling (FDM). FDM is used in many of the consumer-grade polymer 3D printers available today. While consumer grade machines are cheap and plentiful, they lack many of the features desired in a machine used for research purposes and are often closed-source platforms. Commercial-grade models are more expensive and are also usually closed-source platforms that do not offer flexibility for modifications often …

Additive Manufacturing Of Cork, A Cold Spray Technology, Kimberly Kay Dickey

Theses and Dissertations

Cold Spray Additive Manufacturing is a technology capable of mass manufacturing components with complicated geometry and coating substrates in hard-to-reach areas. In addition, cold spray also has the ability of conducting a green manufacturing process, with zero waste of renewable feed material, and zero gas and chemical emission. This paper investigates solely cold spray as an additive manufacturing technology with cork as the natural material. CFD results were used to predict the physical behavior of air and the cork particles. After unsuccessful coatings, final results showed that when moisture is added, cork is successfully cold sprayed, and agglomeration is experienced. …

Benchmark Testing Of Gold Ribbon Bonds On Thin-Film Microchips With New Gold Ribbon Auto-Bonder, Austin Conrad

Master's Theses

The focus of this document is on the gold ribbon bond testing and creation of a bonding map for the new gold ribbon Auto-Bonder at Keysight Technologies in Santa Rosa, California. The new Auto-Bonder replaces a nearly 50-year-old machine that no longer had any documentation for the original process of thin-film microchip ribbon bonding. The original process was developed in the early 1970s to provide an electrical connection from the top to the bottom of the microchip. The electrical connection takes the place of what would be a via in a modern silicon microchip. Gold wire bonding is a common …

Integration Of Blockchain Technology Into Automobiles To Prevent And Study The Causes Of Accidents, John Kim

Electronic Theses, Projects, and Dissertations

Automobile collisions occur daily. We now live in an information-driven world, one where technology is quickly evolving. Blockchain technology can change the automotive industry, the safety of the motoring public and its surrounding environment by incorporating this vast array of information. It can place safety and efficiency at the forefront to pedestrians, public establishments, and provide public agencies with pertinent information securely and efficiently. Other industries where Blockchain technology has been effective in are as follows: supply chain management, logistics, and banking. This paper reviews some statistical information regarding automobile collisions, Blockchain technology, Smart Contracts, Smart Cities; assesses the feasibility …

Survey Data On Energy And Fuel Use Of Firms In Economic Zones In The Philippines, Majah-Leah V. Ravago, Raul V. Fabella, Karl Robert L. Jandoc, Renzi G. Frias, J. Kathleen P. Magadia

Economics Department Faculty Publications

The data describe characteristics, operations, utilities, and fuels used in the production of 115 manufacturing and agro-industrial firms in Philippine special economic zones. The data include information on the firm's production, sales, and schedules; electricity sources, requirements, and uses; the importance of various conventional fuels, and the firms’ fuel expenditure in their major production processes. The data also include their employee's aptitude, knowledge, considerations, and opinions on alternative fuels and primary energies, and experiences in using them. The data were gathered through a series of focus group discussions (FGDs) in June 2019 and an online survey conducted in August to …

Drug-Based Therapeutic Strategies For Covid-19-Infected Patients And Their Challenges, Khatereh Zarkesh, Elaheh Entezar-Almahdi, Parisa Ghasemiyeh, Mohsen Akbarian, Marzieh Bahmani, Shahrzad Roudaki, Rahil Fazlinejad, Soliman Mohammadi-Samani, Negar Firouzabadi, Majid Hosseini, Fatemeh Farjadian

Manufacturing & Industrial Engineering Faculty Publications

Emerging epidemic-prone diseases have introduced numerous health and economic challenges in recent years. Given current knowledge of COVID-19, herd immunity through vaccines alone is unlikely. In addition, vaccination of the global population is an ongoing challenge. Besides, the questions regarding the prevalence and the timing of immunization are still under investigation. Therefore, medical treatment remains essential in the management of COVID-19. Herein, recent advances from beginning observations of COVID-19 outbreak to an understanding of the essential factors contributing to the spread and transmission of COVID-19 and its treatment are reviewed. Furthermore, an in-depth discussion on the epidemiological aspects, clinical symptoms …

A Framework Of Dynamic Data Driven Digital Twin For Complex Engineering Products: The Example Of Aircraft Engine Health Management, Zhenhua Wu, Jianzhi Li

Manufacturing & Industrial Engineering Faculty Publications

Digital twin is a vital enabling technology for smart manufacturing in the era of Industry 4.0. Digital twin effectively replicates its physical asset enabling easy visualization, smart decision-making and cognitive capability in the system. In this paper, a framework of dynamic data driven digital twin for complex engineering products was proposed. To illustrate the proposed framework, an example of health management on aircraft engines was studied. This framework models the digital twin by extracting information from the various sensors and Industry Internet of Things (IIoT) monitoring the remaining useful life (RUL) of an engine in both cyber and physical domains. …

Experimental Investigation Of Additive Manufacturing Of Continuous Carbon Fiber Composites With Multifunctional Electro-Tensile Properties, Ritesh Ghimire, Frank W. Liou

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Manufacturing processes for monofunctional and multifunctional materials vary depending on the design optimization. Multifunctional continuous carbon fiber composites provide great potential in achieving coupled structural and electrical properties for their applications in aircraft, unmanned aircraft systems, and spacecraft. Proper optimization of tensile and electrical properties offers benefits early in the design and continuous operational safety phases to obtain coupled multifunctional properties. In this paper, fused filament fabrication additive manufacturing (AM) technique was used to fabricate continuous carbon fiber solid laminated composites test coupons. The proposed new method characterizes the electrical conductivity's coupled effects on the tensile properties, including the failure …

Construction Of Spatial Filtering Matrices For Norm-Optimal Ilc In Single Point Incremental Forming, Joseph D. Fischer, Mitchell R. Woodside, Douglas A. Bristow, Robert G. Landers

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Iterative Learning Control (ILC) is a control technique used to improve performance in repetitive processes. ILC has grown in popularity in part due to its ease of implementation and ability to achieve high levels of accuracy even in complex nonlinear systems. However, a fundamental limitation of ILC is that it relies on system repetition, making the impact of non-repetitive disturbances (e.g., noise) on the controller's performance severe. Much work has been done to reject noise in the time domain; however, little has been done to address noise which is spatial in nature. In this work, a method for limiting noise …

Additive Manufacturing Of Stainless Steel -- Copper Functionally Graded Materials Via Inconel 718 Interlayer, Xinchang Zhang, Lan Li, Frank W. Liou

Mechanical and Aerospace Engineering Faculty Research & Creative Works

The joining of dissimilar materials is becoming increasingly prevalent to integrate different material properties to enhance design flexibility and overall performance. This study introduced an innovative approach to additively manufacture copper on 316L stainless steel (SS316L) via Inconel 718 interlayers using directed energy deposition (DED). The novel multi-material structure was studied both experimentally and theoretically. The microstructure, tensile properties, microhardness, and thermal performance of the structure were characterized. Residual stress distribution over the structure was revealed by experimental-validated numerical modeling. The result exhibits that defect-free structures with excellent interfacial bonding can be achieved by introducing Inconel 718 interlayers. The bonding …

A High-Pressure Shear Testing Approach To Measure Flow Stresses Near A Friction Stir Welding Tool, David Prymak, Michael Miles, Tracy W. Nelson, Fredrick Michael

Faculty Publications

A new approach for measuring flow stresses near a spinning friction stir welding (FSW) tool is evaluated on AA 6061-T6 plate. The test consists of plunging a cylindrical tool with a flat face into the plate at different rotational speeds, using a variety of constant vertical loads. A viscosity-based model of the shear layer created under the tool is employed to estimate local flow stresses. The flow stresses measured by this approach exhibited an inverse relationship with temperature and a positive dependence on the pressure imposed by the spinning flat-faced tool. Compared to hot compression and hot torsion results, estimated …

Manufacturing: The Qualitative Study Of A Transition To A Green Facility, Brandon David Staves

Masters Theses & Specialist Projects

This qualitative study focused on answering three core questions: How have facilities reduce pollutions in regards to the quality of air, water, land, light and noise? Which Types of pollution reduction projects are more or less successful to implement? What types of pollution are facilities focusing on and why? The results of the 15 companies surveyed show a variety of projects that facilities have used to reduce pollution, it also shows that cost is a major factor in the unsuccessful projects, and that facilities are actively focused on reducing Air, Land, and Water pollution. While the data shows a variety …

The Impact Of Gemba Walks On Preventative Maintenance Productivity, Jake Donald Taylor

Masters Theses & Specialist Projects

Gemba Walks are a tool to get management involvement in areas where the work is taking place. Gemba Walks allow individuals involved first-hand to voice and reduce waste within the process and general operations. This research measured the benefits and improvements Gemba Walks had on the availability of equipment. For example, reducing the number of events that equipment is down for maintenance and its duration to repair these events, therefore improved availability. Maintenance is a critical aspect of keeping a company running, and making improvements found during this research significantly impacted the company by creating lean improvements. The improvements focused …

A Novel Laser-Aided Machining And Polishing Process For Additive Manufacturing Materials With Multiple Endmill Emulating Scan Patterns, Mohammad Masud Parvez, Sahil Patel, Sriram Praneeth Isanaka, Frank W. Liou

Mechanical and Aerospace Engineering Faculty Research & Creative Works

In additive manufacturing (AM), the surface roughness of the deposited parts remains significantly higher than the admissible range for most applications. Additionally, the surface topography of AM parts exhibits waviness profiles between tracks and layers. Therefore, post-processing is indispensable to improve surface quality. Laser-aided machining and polishing can be effective surface improvement processes that can be used due to their availability as the primary energy sources in many metal AM processes. While the initial roughness and waviness of the surface of most AM parts are very high, to achieve dimensional accuracy and minimize roughness, a high input energy density is …

Poly(2-Hydroxyethyl Methacrylate) Hydrogels For Contact Lens Applications–A Review, Kushendarsyah Saptaji, Nurlaely Rohmatul Iza, Sinta Widianingrum, Vania Katherine Mulia, Iwan Setiawan

Makara Journal of Science

The emerging technology in biomedical engineering requires biocompatible materials, which are also referred to as biomaterials. For a material to be considered biocompatible, it should not interact with human tissues in a harmful way, and vice versa. Various properties of biocompatible materials, such as mechanical and optical properties, have to be considered for different biomedical applications. One of the most popular applications of biomaterials is for contact lenses. Hydrogels, specifically poly(2-hydroxyethyl methacrylate) (PHEMA) hydrogels, are among the most popular ones in ophthalmologic applications, especially in soft contact lenses. This paper reviews the use of PHEMA hydrogels as one of the …

Vacuum Infusion Of Composites: Durability Of Hybrid Large Area Additive Tooling For Vacuum Infusion Of Composites, Nathan Northrup, Jason Weaver, Andy R. George

Faculty Publications

The durability of a hybrid large area additively manufactured fiberglass ABS mold for vacuum infusion of composites was evaluated. The validation was done by designing and fabricating a mold for a custom test artifact and analyzing the surface geometry over the course of multiple infusions until tool failure. After printing and machining, the mold required a sealer to maintain vacuum integrity. The mold was able to produce 10 parts successfully before the sealed tool surface began to tangibly roughen, resulting in increased difficulty of demolding and a rougher surface finish. After the 14th infusion, the part required destructive force to …

Design And Development Of A Novel Soft Gripper Manipulated By A Robotic Arm, Derek Price

Symposium of Student Scholars

This study presents the design and development of a tendon-driven soft gripper manipulated by a 4 DOF robotic arm. The proposed robotic arm and the gripper explore the new areas focusing on increasing the grasping performance of the gripper as well as the workspace. The gripper is designed as a 3 finger and driven by tendons using two servo motors. The tension of the strings is adjusted using a pulley mechanism and a string. The opening and grasping of the soft gripper are accomplished by each motor. The wide opening allows the gripper to grasp wide objects. The parallel robotic …

Creation Of A Cip Method For The Heat Exchangers At Rolls-Royce, Melanie Howe, Austin Williams, Caroline Dempsey, Bethany Fralick

Journal of the South Carolina Academy of Science

Rolls-Royce produces various engines which must be tested prior to their distribution to ensure a high-quality product. The manufacturing plant contains four test cells where the engines can be subjected to high levels of torque and extreme temperatures. A heat exchanger is necessary in this testing system and over time, unwanted waste accumulates on the system’s plates. The team is tasked with developing and implementing a system mounted on a mobile cart which can provide data to determine whether the plates need to be cleaned. For this cleaning system to work, it must fully saturate the heat exchanger in cleaning …

Geometrically Complex Planar Heat Exchangers, Derli Dias Do Amaral Junior, Jose Lage

Mechanical Engineering Research Theses and Dissertations

In this study, geometrically complex planar heat exchangers, designed in line with the Constructal Law and operating at steady-state, are investigated numerically. The work is divided into two parts, one focusing on diffusion heat transfer in a rectangular plane and another on conjugate diffusion-convection heat transfer in a circular plane heat exchanger.

In the first part, a heat generating rectangular solid volume made of a low conductivity material is cooled through a small, isothermal side-section of the domain. The diffusion cooling process is improved by distributing within the heat generating material a fixed amount of a high conductivity material. The …

Micro Scalable Graphene Oxide Productions Using Controlled Parameters In Bench Reactor, Carolina S. Andrade, Anna Paula Godoy, Marcos Antônio Gimenes Benega, Ricardo J. E. Andrade, Rafael Cardoso Andrade, Wellington Marcos Silva, Josué Marciano De Oliveira Cremonezzi, Waldemar Augusto De Almeida Macedo, Hélio Ribeiro, Jaime Taha-Tijerina

Manufacturing & Industrial Engineering Faculty Publications

The detailed study of graphene oxide (GO) synthesis by changing the graphite/oxidizing reagents mass ratios (mG/mROxi), provided GO nanosheets production with good yield, structural quality, and process savings. Three initial samples containing different amounts of graphite (3.0 g, 4.5 g, and 6.0 g) were produced using a bench reactor under strictly controlled conditions to guarantee the process reproducibility. The produced samples were analyzed by Raman spectroscopy, atomic force microscopy (AFM), x-ray diffraction (XDR), X-ray photoelectron spectroscopy (XPS), Fourier-transform infrared spectroscopy (FTIR) and thermogravimetry (TGA) techniques. The results showed that the major GO product comprised of nanosheets containing between 1–5 layers, …

Investigation Of Different Hatch Strategies On High Entropy Alloy Fabrication By Selective Laser Melting, Joni Chandra Dhar

Theses and Dissertations

This study investigated the synthesis of CuCrFeNiTiAl high entropy alloy (HEA) from pure elements using selective laser melting (SLM). The objectives are to validate the feasibility of the HEA fabrication from elemental powder materials, and to examine the effect of various hatch strategies and energy densities on the microstructures and other materials properties. 3D samples of CuCrFeNiTiAl alloy were fabricated under different energy densities and with different scan vector lengths. The as-built samples were characterized by X-ray diffraction (XRD), and the microstructures were observed using scanning electron microscopy (SEM). The XRD results showed that face centered cubic, and body centered …

Rapid Annealing Of Perovskite Solar Cell Thin Film Materials Through Intense Pulse Light., Amir Hossein Ghahremani

Electronic Theses and Dissertations

Perovskite solar cells (PSCs) have garnered a great attention due to their rapid efficiency improvement using cheap and solution processable materials that can be adapted for scalable high-speed automated manufacturing. Thin film perovskite photovoltaics (PVs) are typically fabricated in an inert environment, such as nitrogen glovebox, through a set of deposition and annealing steps, each playing a significant role on the power conversion efficiency (PCE), reproducibility, and stability of devices. However, atmospheric processing of PSCs would achieve lucrative commercialization. Therefore, it is necessary to utilize materials and methods that enable successful fabrication of efficient PSCs in the ambient environment. The …

Laser-Induced Forward Transfer (Lift) Based Bioprinting Of The Collagen I With Retina Photoreceptor Cells, Md Shakil Arman

Theses and Dissertations

This thesis focuses on the 3D bioprinting of retina cone cells using the laser-induced forward transfer (LIFT) technique. Bioprinting has a great potential to mimic and regenerate the human organoid system, and the LIFT technique has emerged as an efficient method for high resolution micropatterning and microfabrication of biomaterials and cells due to its capability of creating precise, controlled microdroplets. In this research, the parameters for an effective femtosecond laser-based LIFT process for 3D bioprinting of collagen biomaterial were studied. Different concentrations of collagen I solutions were tested to find out the right concentration that can be transferred through the …