Mechanical Engineering Commons^™

Manufacturing Processes Of A Wooden Tortilla Press: Idea To Production, Emma J. Palmer, Glenn Walker, Colleen Nolan, Olivia Marque, Benjamin Bird

Honors Theses

This thesis follows the Manufacturing Process of a Wooden Tortilla Press from idea to production following lean manufacturing processes and producing a valuable, and profitable product.

The Design And Manufacturing Process Of The Concealed Shelf, Mexrojiddinbek Sattorov

Honors Theses

This document contains information regarding the design and build process of the Concealed Shelf, which is a furniture product with hidden storage capability. First, the team members decided on the design of the product, followed by market analysis and manufacturing feasibility. Lean manufacturing principles were applied to improve the process efficiency and reduce waste.

Multiple prototypes were built with varying raw materials and locking mechanisms. Jigs and fixtures were handcrafted to ensure more consistent product quality. Two production runs were conducted to evaluate performance and identify areas for improvement.

The final design includes economic considerations, manufacturing layout, and continuous improvement …

Lunar Manufacturing Systems And The Role Of Additive Recycling Technologies, Camille A. Newman

Honors Theses

Renewed international interest in sustained lunar exploration has created a growing demand for technologies to support long-duration space exploration. Part of the recent Artemis missions and the Moon to Mars initiative is to improve key mission capabilities and fill critical gaps necessary to sustain lunar habitation. Waste management, recycling systems, and manufacturing systems have been identified as critical technologies that need further development before a sustained mission is possible. This thesis explores the feasibility of an additive manufacturing and recycling system designed to process plastic waste generated during extended lunar habitation. Initial research focused on existing manufacturing and recycling technologies …

Lunar Manufacturing Systems And The Role Of Additive Recycling Technologies, Camille A. Newman

Honors Theses

Renewed international interest in sustained lunar exploration has created a growing demand for technologies to support long-duration space exploration. Part of the recent Artemis missions and the Moon to Mars initiative is to improve key mission capabilities and fill critical gaps necessary to sustain lunar habitation. Waste management, recycling systems, and manufacturing systems have been identified as critical technologies that need further development before a sustained mission is possible. This thesis explores the feasibility of an additive manufacturing and recycling system designed to process plastic waste generated during extended lunar habitation. Initial research focused on existing manufacturing and recycling technologies …

Introduction To Computer-Aided Design Using Solidworks® : A Structured Approach To Parametric Modeling And Design Intent, Swapnil Moon

Open and Affordable Textbooks

This textbook introduces computer-aided design (CAD) using SOLIDWORKS® through a structured, design-centered approach that emphasizes parametric modeling and engineering reasoning. Rather than focusing solely on software commands, the material develops foundational skills in design intent, constraint-based modeling, and feature relationships to create robust, adaptable models.

The content is organized progressively, beginning with basic sketching and feature creation and advancing to complex part modeling, assemblies, motion studies, and engineering drawings. Each chapter builds upon prior concepts, reinforcing systematic modeling practices and promoting the development of system-level thinking required in real-world engineering design workflows.

Designed for undergraduate students with little or no …

Niu Fsae Brake Rotor Design & Flywheel-Based Test Stand Development, Cody J. Marko, Austin Coyne, Alexander Boyden

Honors Capstones

This project addresses the need for a reliable and validated brake rotor for the Northern Illinois University Formula SAE vehicle following a prior catastrophic rotor failure within the team. Brake rotors in high-performance applications are subjected to significant thermal and mechanical loads, and inadequate design can lead to failure, posing serious safety risks and limiting vehicle performance. To solve this issue, a new brake rotor was designed alongside a dedicated test stand to both improve braking performance and enable experimental validation. The rotor was evaluated using finite element analysis (FEA), including transient thermal and structural simulations, to predict maximum temperature, …

A Federated Learning Framework For Data-Sovereign Predictive Maintenance In Distributed Smart Manufacturing, Md Sazol Ahmmed, Sriram Praneeth Isanaka, Frank Liou

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Featured Application: The proposed federated learning framework can be applied in distributed smart manufacturing environments where multiple factories or production facilities collaboratively develop predictive maintenance models without sharing sensitive operational data. This approach is particularly useful for industrial networks involving geographically distributed plants, contract manufacturing partners, and multi-site production systems where data sovereignty and avoidance of raw data sharing are critical. Predictive maintenance enables early detection of machine failures and reduces unexpected production downtime. However, conventional approaches typically rely on centralized data collection and model training which introduce challenges related to data sovereignty, communication overhead and data ownership. To address …

Using Machine-Learning-Based Process Map To Guide Evaluation Of Inconel 625 Mechanical Properties In Laser Foil Printing, Yu Hsiang Wang, Sung Heng Wu, Hung Chu Chiang, Pen Ning Yu, Chia Hung Hung, Ming C. Leu

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Inconel 625 is widely studied in powder-based additive manufacturing, but its processing characteristics and mechanical performance in foil-feedstock laser foil printing (LFP) remain largely unexplored. In this study, a gradient boosting regression (GBR)-based process map was developed for LFP of Inconel 625 using 32 single-track experiments. The GBR model achieved R² values of 0.859 and 0.793 and mean absolute errors of 22.25 μm and 19.83 μm for melt-pool depth and width, respectively, outperforming second- and third-order polynomial regressions in capturing nonlinear melt-pool responses and distinguishing lack-of-fusion, conduction, and keyhole regimes. Three conduction-mode conditions with target depth-to-foil thickness ratios (D/T) …

Modernizing Plastics And Composites Manufacturing Using Hybrid Modeling Techniques, Luke Shannon

All Dissertations

Plastics and composites manufacturing encompasses a broad family of processes, including injection molding, resin transfer molding, compression molding, and extrusion, that together account for the vast majority of polymer and composite component production worldwide. These processes are inherently challenging due to the multi-physics nature of polymer processing, the vast possible combinations of resins, reinforcements, and additives, and the strong dependence of final part properties on process history. Among these processes, injection molding is one of the most widely deployed, producing high-volume components across automotive, medical, consumer electronics, and packaging industries. However, accurately monitoring and predicting process behavior in injection molding …

Manufacturing Systems: Characteristics And Dynamics, Alan J. Fitzmorris

Graduate Theses and Dissertations (2019 - present)

This research answers three basic questions. First, what are the behaviors (dynamics) of a manufacturing system in the context of system performance? Are these dynamics best described as linear deterministic, periodic, nonlinear deterministic, or stochastic? Second, what are the complexity (chaotic) characteristics of a manufacturing system, namely the maximal Lyapunov exponent, correlation dimension, and Kolmogorov-Sinai entropy? Third, is there a relationship between complexity characteristics and manufacturing system performance? This research involves four high level steps: data analysis, system dynamics analysis, system complexity analysis, and correlation analysis. The data analyzed consists of concrete plant and shipbuilding shop time series performance data. …

Implementation Of The Fourth Industrial Revolution Technologies In Tanzania’S Downstream Oil And Gas Industries, Vitalis John Mwinyi

Tanzania Journal of Engineering and Technology (TJET)

The advent of the fourth industrial revolution (IR4.0) has resulted in the digital transformation of multiple sectors of the economy due to the disruptive nature of the technologies driving the revolution. The technologies have already found their way into the oil and gas industries across the globe, especially in upstream, midstream, and downstream operations. However, the degree of implementation is not the same for these operations, considering the complexities involved, integrated process, the associated risk and investment cost, among others. This study aimed to establish the implementation level of IR4.0 technologies in the downstream operations. A survey method was employed …

Manufacturing Of Functional Surface Coatings In The Automotive Industry, Gulirano Saidakhmedova

Technical science and innovation

The development of environmentally sustainable technologies for material processing represents one of the most pressing scientific and technical challenges in modern industrial production. This issue is particularly relevant to the automotive industry, where growing demands for energy efficiency, durability, and environmental safety necessitate the adoption of advanced manufacturing methods. Special attention is given to developing vacuum-based, import-substituting equipment and technologies for producing functional coatings from composite materials with predefined physical, mechanical, and optical properties, including reflective and protective characteristics. Current requirements for mechanical engineering products and production technologies drive the need for innovative approaches to material processing and specialized technical …

Quantitative Phase-Field Modeling Of Nonequilibrium Microstructural Evolution In Rapid Solidification For Additive Manufacturing, Leiji Li, Fei Xiao, Ying Zhou, Xiaorong Cai, Chongfeng Zhang, Jinzhong Gao, Xiaopeng Shen, Tianchi Zhu, Sihan Wang, Yijia Gu, Xuejun Jin

Materials Science and Engineering Faculty Research & Creative Works

Fusion-based metal additive manufacturing (AM) relies on layer-by-layer deposition and rapid solidification, where the material transitions swiftly from liquid to solid. A key phenomenon during this process is solute trapping, a nonequilibrium effect governed by a velocity-dependent partition coefficient, which critically influences microstructure kinetics, morphology, and phase formation. In this study, we employ a recently proposed quantitative phase field (PF) model to systematically explore solute trapping, solute drag, and their impacts on pattern formation during rapid solidification at AM-relevant velocities, in both one and two dimensions. Our simulations reveal a growth mode transition from planar to cellular to dendritic, and …

Construction Of A Deffi Sprayer: Using 3d Printer Methodology And Techniques For Cost-Effective Analysis Using Desi Mass Spectrometry Imaging, Ryan Karst, Savvy Stevens, Luke Amos, Logan Koester, Ethan Newbold, Karson Whitaker

Symposium Projects

Using 3D Printer Methodology and Techniques for Cost-Effective Analysis using DESI Mass Spectrometry Imaging

Investigation Of Process Parameters To Fabricate Tiwmo Refractory Medium Entropy Alloy Via Laser Powder Bed Fusion, Abdullah Al Masum Jabir, Lindsey A. Salazar, Jianzhi Li

Manufacturing & Industrial Engineering Faculty Publications

This paper presents an experimental study on the fabrication of a TiWMo refractory medium-entropy alloy (RMEA) using laser powder bed fusion (PBF-LB/M, commonly known as selective laser melting) from elemental powders as well as successful alloy formation on titanium substrates. The effects of tungsten particle size and process parameters on successful TiWMo RMEA fabrication have been explored using scanning electron microscopy (SEM), x-ray diffraction, hardness measurement and microstructural analysis. Scanning electron microscope (SEM) analysis revealed that the lowest percentage (0.01%) of unmelted tungsten particles was observed at a laser power of 350 W and scanning speed of 250 mm/s, particularly …

Optimizing Warranty Policies For Remanufactured Products: When Should They Be Longer, Shorter, Or Identical To New Product Warranties?, Kunpeng Li, Jun-Yeon Lee

Faculty Publications

Manufacturers adopt different warranty strategies for remanufactured products, offering shorter, identical, or longer warranty periods compared to new products. However, prior research has only focused on manufacturers offering either shorter or identical warranties. In addition, the existing literature has not captured the diminishing returns of warranties, i.e., as the warranty coverage increases, its incremental benefits begin to decrease but the costs continue to increase. To address these gaps, we develop an optimization model that jointly considers pricing and warranty decisions while accounting for warranty’s diminishing effect on consumer’s willingness to pay for remanufactured products. We show that all three observed …

Layer-Wise Printing Parameter Optimization For Laser Powder Bed Fusion, Chaoran Dou, Rongxuan Wang, Raghav Gnanasambandam, Jianzhi Li, Zhenyu James Kong

Manufacturing & Industrial Engineering Faculty Publications

Additive manufacturing (AM) is a transformative technology that enables the fabrication of complex geometries layer by layer. However, metal parts produced via AM processes such as laser powder bed fusion (LPBF) are prone to various defects, including porosity and deformation. These defects often result from suboptimal printing parameter settings. Traditional approaches typically aim to reduce defects by optimizing a fixed set of parameters for the entire part. However, such methods do not account for layer-wise variations in printing conditions caused by changes in geometry, heat transfer, and re-heating effects. While optimizing parameters for each layer could improve part quality, it …

Reinforcement Learning For Imbalanced Data In Robotic Anomaly Detection Within Autonomous Manufacturing, Salma Messaoudi, Ahmed Bendaouia, El Hassan Abdelwahed, Mohammed Ameksa, Hajar Mousannif, Jianzhi Li

Manufacturing & Industrial Engineering Faculty Publications

Ensuring reliable anomaly detection in industrial robots is critical for safe and autonomous manufacturing operations. However, it remains challenging due to temporal dependencies and class imbalance in sensor data. This study presents a reinforcement learning approach using Deep Q-Network (DQN) enhanced with Long Short-Term Memory (LSTM) and Gradient Boosting Machine (GBM) for robust anomaly detection in robotic systems. The proposed framework integrates an LSTM into the DQN policy to capture temporal patterns. It also introduces a novel GBM-based reward mechanism that mitigates class imbalance by applying SMOTE (Synthetic Minority Over-sampling Technique) after removing temporal dependencies. Experimental results demonstrate that this …

Thermal Management And Lubrication Characteristics Of Tungsten Disulfide (Ws2) Vegetable-Based Nanolubricants, Jaime Taha-Tijerina, Dyana De Leon-Elizondo, Jade Mendieta, Leonardo Taha-Soto

Informatics and Engineering Systems Faculty Publications

Recent innovations with the aid of nanotechnology are more frequently seen in the industrial sectors. Lubricants are a high-end commodity resource used in many manufacturing processes; unfortunately, most of these lubricants are petroleum-based, which come with certain drawbacks, such as environmental aspects, handling issues and high costs. With the incorporation of nanostructures within fluids and lubricants, novel material alternatives are replacing conventional lubrication systems, maintaining the required thermophysical and tribological characteristics. This research provides an analysis of vegetable lubricant, castor oil (CO), and the effects of the incorporation of WS2 nanofiller at diverse filler fractions. A TEMPOS thermal analyzer device …

Design And Development Of A 12-Degree-Of-Freedom Quadruped Robot, Kai De La Cruz

Master's Theses

This thesis presents the design, analysis, and experimental validation of a 12-degree-of-freedom (DOF) quadruped robot developed as a research platform for legged locomotion and control. The system builds upon the Cal Poly Legged Robotics Group’s prior 8-DOF quadruped, addressing key limitations in manipulability, load distribution, and mechanical robustness by introducing a 3-DOF leg architecture.

The mechanical design emphasizes lightweight construction, structural integrity, and modularity to support future research extensions. Static and dynamic loading models were developed to inform component sizing and material selection. A carbon-fiber chassis and redesigned leg assemblies were fabricated and validated through finite element analysis and physical …

Bonderson Workbench, Han Xu, Aidan Robleto, Sean Murphy, Victor Duran

Mechanical Engineering

This project redesigns the existing creative workbenches in Cal Poly's Bonderson High Bay to improve mobility and functionality for students and staff in the Mechanical Engineering Department.

Fsae Bespoke Brake Calipers For Hub Motor Architecture, Connor William Vaughan, Liam Upton Walsh, Bradley Brian Kern

Mechanical Engineering

Brakes are the most critical safety system on any performance vehicle, and as Cal Poly Racing transitions their Formula SAE car from a single rear motor to a four-in-wheel motor setup with regenerative braking, the team identified an opportunity to develop a bespoke brake caliper tailored to their specific needs. This document outlines the research, design, manufacturing, and validation of custom front brake calipers designed to improve upon commercial motorcycle calipers in key areas such as serviceability, mounting rigidity, thermal behavior, mass, and hub motor integration. The resulting design is a two-piece, four-piston, radially-mounted aluminum caliper featuring titanium pistons, toolless …

Cvj Torque Loss Dynamometer, Malaika Sriram, Coleman Brown, Zachary Norris, Logan Mast, Chris Mattis

Mechanical Engineering

This report details the design and results of a dynamometer testing rig built to measure torque losses in constant velocity joints (CVJs) for Cal Poly Racing's Baja SAE team. The rig spins a flywheel connected to articulable CVJs up to 800 RPM using a motor, then decouples it and measures the spin-down rate from 800 to 100 RPM to calculate angular acceleration and torque loss. The data collected from this dyno will be used to inform freewheel packaging for future Baja car development.

An Autonomous Robotic System For Object Retrieval And Delivery: Enhancing Independence For Users Living With Disability And Older Adults, Jincheng Li, Chenghao Lin, Amna Mazen, Youssef A. Bazzi

Michigan Tech Publications

As the global population ages, there is a growing need for assistive technologies to help older adults maintain their independence. This work presents a cost-effective autonomous socially assistive robot designed for object retrieval and delivery, enhancing accessibility in home environments. The system is built on the Robot Operating System (ROS) framework and integrates three key components: the Pioneer P3-DX mobile robot for autonomous navigation, the ReactorX-200 robotic arm for pick-and-place operations, and the Kinect v2 RGB-D camera for object detection and localization. Users interact with the robot through natural language processing by issuing voice commands to retrieve various objects. Microsoft …

Artificial Intelligence And Additive Manufacturing As A Coupled Design System: Rethinking Inference, Manufacturability, And Design Education, Charul Chadha, Garth Crosby, Sabit Ekin, Mohamed Gharib, Eman Hammad, Congrui Jin, Ali Ahmad Malik, Noemi Mendoza Diaz, Calahan Mollan, Monsuru Ramoni

Manufacturing & Industrial Engineering Faculty Publications

Artificial intelligence (AI) is becoming deeply integrated into additive manufacturing (AM) workflows, reshaping how designers approach geometry, materials, and process constraints. AI holds significant potential by accelerating design exploration, revealing complex patterns in AM behavior, and supporting earlier assessment of manufacturability. At the same time, it introduces new risks related to model transparency, data quality, physical validity, and the potential for overreliance by students and practitioners. This perspective examines these issues through four guiding questions that address the role of AI in AM-enabled design, the gaps that limit or enable AI contribution, the implications for engineering education, and the responsibilities …

Harnessing Ml And Iiot For Traceability In Continuous Production Systems: A Conceptual Framework, Kholoud M. Abdelaal

Theses and Dissertations

In the era of rapid technological advancement, the manufacturing sector faces increasing pressure to leverage emerging technologies to enhance operational efficiency and minimize waste. In this context, traceability plays a pivotal role, as it provides complete visibility of processes and products throughout manufacturing systems, enabling them to identify areas for improvement and take corrective actions accordingly. Additionally, traceability ensures compliance, supports product recalls, provides a clear understanding of the system’s performance, and enables fact-driven decision-making in multiple aspects of the manufacturing system. Although the broad spectrum of traceability applications in batch production-based plants, traceability remains challenging to achieve in continuous …

Reinforced Scan: A Reinforcement Learning Enabled Optimal Laser Scan Path Planning In Laser Powder Bed Fusion Additive Manufacturing, Chaoran Dou, Jihoon Chung, Raghav Gnanasambandam, Yuhao Wu, Jianzhi Li, Zhenyu James Kong

Manufacturing & Industrial Engineering Faculty Publications

Additive Manufacturing is an innovative technology that fabricates parts layer by layer. However, in Laser Powder Bed Fusion (LPBF), printed metal parts often exhibit residual stresses, deformations, and other defects due to non-uniform temperature distribution during the printing process. To mitigate these issues, an optimized scan sequence within each layer can improve thermal uniformity. Traditional optimization methods, which rely on domain knowledge and employ trial-and-error or heuristic approaches, often fail to achieve optimal solutions due to the complex nature of the problem. One major challenge in improving scan strategies lies in the vast search space required to optimize the scan …

Nissan Leaf Disassembly Tool And Test Stand Design, Mariah Z. Hodge

Williams Honors College, Honors Research Projects

The Akron Engineering Tribology Laboratory has developed a water-based lubricant and aims to test and observe if the water-based lubricant could work in an electric vehicle environment. As parameters for creating a test stand to mimic an electric motor environment are not readily available online, the goal of this senior design project is to take apart a used Nissan Leaf engine to define the parameters a test stand must meet to accurately recreate an electric motor environment. Knowing these parameters, a test stand will then be designed for testing the water-based lubricants. The purpose of building a test stand to …

Effect Of Wall Movement On Porosity Formation In Ductile Iron Castings Under Varying Processing Parameters, Shamsul Alam

College of Graduate Studies: Theses & Dissertations

Shrinkage porosity is a major defect that significantly impairs the mechanical properties and overall performance of ductile iron castings. Although graphite formation during solidification induces volumetric expansion, this expansion alone is insufficient to fully compensate for the shrinkage occurring throughout solidification. During the solidification and cooling of ductile iron, multiple phase transformations occur, resulting in dynamic volume changes that exert pressure on mold walls and internal cavities. These pressures can deform mold walls and casting surfaces, leading to defects such as swell and porosity, while also influencing shrinkage formation. This study aims to analyze the mechanisms of porosity formation and …

Direct Ink Writing Of Shear Exfoliated Two-Dimensional Nanomaterial- Elastomeric Multifunctional Nanocomposite, Md Abdur Rahman Bin Abdus Salam, Asif Hasan Ridoy, A K M Abirul Haque, Muhammad Shahbaz Rafique, Md Arafat Hossain, Md Shahriar Forhad, Matthew G. Boebinger, Farid Ahmed, Karen Lozano, Ali Ashraf

Manufacturing & Industrial Engineering Faculty Publications

Direct ink writing (DIW) of polymer nanocomposites with high loadings of two-dimensional (2D) nanofillers (graphene and hexagonal boron nitride (hBN)) is challenging because of potential clogging, use of hazardous solvents, and agglomeration. Here, in this work, a shear exfoliation and sieving method to prepare DIW ink with high loading of nanofillers produced from low-cost bulk layered materials such as graphite and bulk hBN powder for successful DIW printing without the use of any solvents, binders, or plasticizers. The single-step exfoliation technique resulted in a composite with substantial layer reduction along the c-axis, as confirmed by SEM, TEM, XRD, and Raman …