Mechanical Engineering Commons^™

Design Of An Sae Baja Racing Off-Road Vehicle Powertrain, Eric T. Payne

Williams Honors College, Honors Research Projects

No abstract provided.

Stress-Limiting Test Structures For Rapid Low-Cost Strength And Stiffness Assessment, Andrew Katz, Craig P. Lusk, Nathan B. Crane

Faculty Publications

Purpose: Evaluate the use of a simple printed geometry to estimate mechanical properties (elastic modulus, yield strength) with inexpensive test equipment.

Design Methodology/Approach: Test geometry is presented that enables controlled strains with manual deformation and repeatable measurement of vibrational frequencies. This is tested with multiple FDM machines to assess measurement accuracy and repeatability. Printing orientation and some printing parameters are varied to assess the measurement sensitivity.

Findings: The test methods show good correlation with manufacturer material specifications in the X-Y plane and reported elastic strain limits. It is also sensitive to printing orientation and printing parameters.

Research Limitations/Implications: Further work …

Engineered Surface Properties Of Porous Tungsten From Cryogenic Machining, Julius M. Schoop

Theses and Dissertations--Chemical and Materials Engineering

Porous tungsten is used to manufacture dispenser cathodes due to it refractory properties. Surface porosity is critical to functional performance of dispenser cathodes because it allows for an impregnated ceramic compound to migrate to the emitting surface, lowering its work function. Likewise, surface roughness is important because it is necessary to ensure uniform wetting of the molten impregnate during high temperature service. Current industry practice to achieve surface roughness and surface porosity requirements involves the use of a plastic infiltrant during machining. After machining, the infiltrant is baked and the cathode pellet is impregnated. In this context, cryogenic machining is …

Binder Jet Additive Manufacturing Of Stainless Steel-Hydroxyapatite Bio-Composite, Don Suranga Dhanushka Uduwage

All Graduate Theses, Dissertations, and Other Capstone Projects

This study was conducted to create a bio-composite with a porous structure using the binder-jet printing additive manufacturing process. The samples were printed by changing the parameters such as layer thickness, roller speed, sintering time and sintering temperature of the X1-Lab binder jet additive manufacturing printer. The samples were printed 80% stainless steel 316 mixed with 20% Calcium Phosphate Tribasic by volume. Eight experiments were attempted to print according to the fractional factorial design of experiment. The effects of changing parameters on the mechanical properties of the new bio-composite was tested using ASTM E-09 compressive strength standards. The compression testing …

Machining Strategies Exploring Reduction In Energy Consumption, Abdullah Al Mamun

All Graduate Theses, Dissertations, and Other Capstone Projects

The main aim of this thesis is to explore machining strategies, analyzing energy consumption using Design of Experiments (DOE) at the material removal rate (MRR), compare to cutting geometrical trajectories according to CNC parameters such as spindle RPM, feed rate, depth of cut per pass and total depth of cut. Spindle RPM, depth of cut per pass, and feed rate are selected as the main three factors and each factor has two levels: low-level (-) and high-level (+). These experiments have been performed at an end-milling machine by using a concept of a constant volume of material removal processes in …

Color Removal From Pulp Mill Effluent Using Coal Ash Produced From Georgia Power Coal Combustion Plants, Christopher B. Willett

College of Graduate Studies: Theses & Dissertations

Two environmental concerns currently face Georgia: coal fly ash (CFA) waste from coal power plants, and the effluent generated by pulp mills. Pulp mill effluent discolors surface waters into which it is discharged, and has been proven to negatively impact the dissolved oxygen and carbon necessary for aquatic life. The proposed solution is a cost-effective adsorption treatment using an inexpensive but abundantly available waste material: CFA. CFA possesses beneficial properties that allow it to effectively remove contaminants, and is available at significantly reduced cost. The primary research objective was to define treatment parameters that would result in the maximum removal …

Planning Freeform Extrusion Fabrication Processes With Consideration Of Horizontal Staircase Effect, Amir Ghazanfari, Wenbin Li, Ming Leu, Robert Landers

Faculty Publications, Mechanical Engineering

An algorithm has been developed to estimate the “horizontal” staircase effect and a technique is proposed to reduce this type of geometrical error for freeform extrusion fabrication processes of 3D “solid” parts. The adaptive rastering technique, proposed in this paper, analyzes the geometry of each layer and changes the width of each line of the raster adaptively in order to reduce the staircase error and increase the productivity simultaneously. For each line, the maximum width that results in a staircase error smaller than a predefined threshold is determined for decreasing the fabrication time or increasing the dimensional accuracy, or both. …

Size Effects In Human Visual Inspection For Micro/Meso Scale Parts, Sri Harsha Kavuri

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

Visual inspection has been a major method of quality control in conventional manufacturing processes for the last fifty years. Utilizing trained human inspectors to perform this visual inspection has been the most effective means of maintaining quality control. Extensive research has been performed to understand the factors that influence the human inspection process.

In the recent years, there has been a significant emphasis on manufacturing at the smaller end of the size-spectrum such as Micro and Meso scale manufacturing. Quality control at becomes a challenging task due to the extremely small sizes. Several automated visual inspection techniques have been proposed …

Photonic Crystal Fibre Wgm Resonators For Magnetic Field Sensing, Aseel Mahmood, Vishnu Kavungal, Yuliya Semenova, S. S. Ahmed

Conference Papers

Whispering gallery mode (WGM) micro-resonators are remarkable optical devices whose small modevolumes and high Q-factors make them attractive for a wide range of applications such as filters, lasers, modulators and sensors [1]. WGMs can be excited in dielectric structures with circular symmetry, such as microspheres, micro-disks, and optical fibres, and can be imagined as closed-trajectory rays confined within the cavity by almost total reflections from the curved surface of the resonator. The spectral positions of the WGM resonances are highly sensitive to the geometrical dimensions of the resonator and refractive indices of both the resonator itself and its surrounding medium …

Development Of A Hydraulic Component Leakage Detecting System Using Pressure Decay Signal, Xuanju Shang

Dissertations and Theses @ UNI

It is preferable to detect leakage at the earliest phase in the manufacturing process, and then further assembly of hydraulic components with leakage problems can be avoided. Integrating a USB based microcontroller and a pressure sensor; this study developed a hydraulic leakage detection system in using air instead of hydraulic oil as medium, through measuring pressure decay signals captured by a real time data acquisition system. Compared with the conventional hydraulic system using oils, this system shows advantages in safety operation and little environmental concerns due to use a lower pressure clean air.

The low-cost hydraulic leakage detection system was …

Process Improvements Of Cilantro Harvesting With Ergonomic Considerations, Eric Penningroth, Branden Shimamoto

Industrial and Manufacturing Engineering

The problems presented by Talley Farms to the team were a lower than desired cilantro harvesting capacity and work health pertaining to lower back problems. The project objectives were to address and improve upon both of these objectives. To increase harvesting capacity, a simulation model was created using standard times from time studies. The simulation model helped to compare the different harvesting methods as well as the effect of the utilization of the on-site manager. The throughputs between each of the models were analyzed. To address ergonomic concerns, a work sampling study was conducted and it was determined that kneeling …

Bikeshare Business Model For Cal Poly- San Luis Obispo, Justin Benson, Andrew Neil Gatchalian

Industrial and Manufacturing Engineering

With the increasing admittance of students into colleges and universities across the nation, the need for alternate modes of transportation is becoming more pressing. College and university campuses, as well as small cities, in which there is a college or university, are being overloaded with student cars. In San Luis Obispo specifically, parking on campus as well as downtown can be extremely difficult to find. Traffic is also getting progressively worse, especially at the hour when class begins/ends and student arrive to or leave campus. Financial reasons are yet another deterrent for students at Cal Poly. Parking permits, gas, and …

Effects Of Patient Factors On Implantation Rates In In Vitro Fertilization, Heidi Richardson, Sofia Soto

Industrial and Manufacturing Engineering

The purpose of this report is to evaluate the effects of patient factors and embryo quality on the implantation rate in In Vitro Fertilization (IVF). For this report, statistical methods are used to test the significance of several patient and embryo characteristics on embryo implantation rate. This project is an analysis of data collected from over 36,000 patients.

The analysis concluded several findings. There was enough statistical evidence to conclude that age was significant in regards to implantation rate and FSH levels. As the patient ages, the amount of FSH levels found in their blood increases. A patient with high …

Redesign Of Talley Farm's "Fresh Harvest" Produce Program, Nicole Bordwell, John Rivera, Jared Toboni

Industrial and Manufacturing Engineering

Fresh Harvest, a Central Coast Community Supported Agriculture (CSA) program run by Talley Farms located in Arroyo Grande, CA, has a rapidly growing customer base. They harvest, package, and deliver boxes of fresh quality produce to almost 3000 subscribers. However, Talley Farms’ space for production and processing is limited and at times required for other aspects of business. This results in a problem where Talley Farms current processing system of produce for the Fresh Harvest program is not suitable for the forecasted growing demand. This report addresses the need to prepare for continued significant growth to the demand for Fresh …

Analysis And Improvement Of The Security Building At Pg&E Diablo Canyon Nuclear Power Plant, Alyssa Carter, Natalie Christa, Phuong Anh Pham Dinh

Industrial and Manufacturing Engineering

A new Security building was recently designed and built at the Pacific Gas and Electric (PG&E) Diablo Canyon Power Plant (DCPP).This building’s staff and equipment are responsible for performing routine inspections on all personnel entering the facility in order to prevent security-related incidents from occurring at the nuclear power plant. Similar to airport security procedures, the DCPP security building routine inspections include the use of x-ray machines, metal detectors, and explosive detectors.

The Power Plant periodically experiences pre-planned, preventive maintenance outages, that last 4-6 weeks. During an outage, a power plant reactor is shut down for maintenance, repair, and re-fueling. …

Cold Roll Extrusion Machine Redesign Final Design Report, Foja Bains, Bryan Cyr, David Van Schooten

Mechanical Engineering

This report is a comprehensive review of a redesign of subsystems for a Cold Roll Extrusion Machine, a forging operation, for PCC Rollmet. Three subsystems were addressed in this project: A new Loading system, Feed system, and Lubrication system. The Loading system, and support system during developmental design stages, addressed the timely loading process of pipes onto the forging machine. After two quarters of design iteration, the group decided on a lever arm, hydraulic actuated, loading design. In the final quarter of the project, a quarter scale model of this lever arm was constructed to prove the concept of the …

Machine Shop Learning Kits, Samantha Kelley, Ellen Chambers

Mechanical Engineering

Currently in the Cal Poly Machine shops, students are struggling to find ways to fulfill the 10 hours of shop experience required to gain their Yellow Tag certification. Red Tag is the first level of certification students generally achieve their freshman year. It allows them to use basic machine tools such as drills, shears, benders, etc. Then after completing 10 hours of shop experience they can take the Yellow Tag test, which gains them access to use a welder, mill, and lathe. The heads of the machine shop, the shop technicians, and the mechanical engineering students will all have different …

Semi-Automated Glass Mat Splice Operation For Asphalt Shingle Line, Justin Bracci, Harry Zhao, Chad Linafelter

Mechanical Engineering

The following report details the senior project sponsored by GAF Materials Corporation, Shafter, CA in regards to semi-automating a glass-mat splicing table for asphalt roofing shingle production. Herein includes details, research, design, and analysis regarding the semi-automation of the gluing processes for the splicing table. A working prototype was manufactured and tested for the future implementation onto GAF’s production line or further senior project involvement.

Cal Poly India Project, Derek Babine, Austen Hibler, Alex Hernandez

Mechanical Engineering

This report documents the research, ideation, and development of a solution, implemented by the Cal Poly India Sanitation Team per the request of Mr. Harish Bhutani, to solve the problem of hazardous human waste management in poor villages in India. The sponsor envisioned a universal design that would give each household in those villages access to a private toilet system because the current solution is open defecation in water sources and farming fields. The initial constraints required the project be low cost, not use of electricity or water, have the ability to cater to an 8-10 person household, and be …

A Preventive Maintenance Framework In Dairy Production Operations, Maria F. Vargas

Theses and Dissertations - UTB/UTPA

Dairy operations suffer frequent stops. Product shrinkage is a consequence of downtime, which includes losses of packaging material, scraped finish product and capacity. This work proposes a troubleshooting methodology to identify causes of downtime, estimation of waste cost, and minimization of operation disruptions by applying a combination of a cost function to assess waste, and performance measurements. The drinkable yogurt process is evaluated to find the principal areas for wasted bottles and yogurt. In order to make a decision about which of those sources to address, a General Cost Function is used to estimate waste cost which include measurements that …

Biphilic Nanoporous Surfaces Enabled Exceptional Drag Reduction And Capillary Evaporation Enhancement, Xianming Dai, Fanghao Yang, Ronggui Yang, Xinyu Huang, William A. Rigdon, Xiaodong Li, Chen Li

Faculty Publications

Simultaneously achieving drag reduction and capillary evaporation enhancement is highly desired but challenging because of the trade-off between two distinct hydrophobic and hydrophilic wettabilities. Here, we report a strategy to synthesize nanoscale biphilic surfaces to endow exceptional drag reduction through creating a unique slip boundary condition and fast capillary wetting by inducing nanoscopic hydrophilic areas. The biphilic nanoporous surfaces are synthesized by decorating hydrophilic functional groups on hydrophobic pristine multiwalled carbon nanotubes. We demonstrate that the carbon nanotube-enabled biphilic nanoporous surfaces lead to a 63.1% reduction of the friction coefficient, a 61.7% wetting speed improvement, and up to 158.6% enhancement …

Team Nathan Suspension, Frankie J. Wiggins, Alex D. Seitz, Justin P. Bautista

Mechanical Engineering

Nathan Cooper is an 8-year old boy with Spinal Muscular Atrophy (SMA). SMA has affected Nathan’s muscle development and requires him to use the Standing Dani™ mobility device. The Standing Dani is a motorized standing wheelchair, or Wheelstand. Nathan controls and uses it to get around. Though the Standing Dani performs well for most functions, it has some distinct issues. The primary issue that this project addresses is its lack of suspension and the discomfort that Nathan feels as a result. After talking with our client, we developed several specifications generally related to geometry, safety, vehicle dynamics, and reliability. Many …

Evaluation Of Heat Recovery Options For Improved Energy Efficiency Of A Manufacturing Facility, Allison Chouinard

Master's Theses (2009 -)

Nationwide process heating in the manufacturing sector accounts for 7,815 trillion BTU of energy use annually; this is roughly one-third of the sector's total energy consumption [Energetics Incorporated, 2014]. The U.S. Department of Energy estimates that seventy percent of process heating is fueled by the onsite burning of fossil fuels [Energetics Incorporated, 2014]. These fuel-fired process heating applications are prime opportunities for heat recovery projects capable of saving energy and, consequently, reducing operating costs. This thesis evaluates different methods for heat recovery in the Milwaukee manufacturing facility of STRATTEC Security Corporation. As a basis for this work, the overall energy …

A Collagen‐Glycosaminoglycan‐Fibrin Scaffold For Heart Valve Tissue Engineering Applications, Claire Brougham, Stefan Jockenhoevel, Thomas Flanagan, Fergal O'Brien

Conference Papers

The field of heart valve biology and tissue engineering a heart valve continue to expand. The presentatio ns at this meeting reflect the advances made in both areas due to the multi-disciplinary approach taken by many laboratories.

A Control-Chart Based Method For Solder Joint Crack Detection, Jianbiao Pan

Industrial and Manufacturing Engineering

Many researchers have used different failure criteria in published solder joint reliability studies. Since the reported timeto-failure would be different if different failure criteria were used, it would be difficult to compare the reported reliability life of solder joints from one study to another. The purpose of this study is to evaluate the effect of failure criteria on the reported thermal fatigue life and determine which failure criterion could detect failure sooner. First, the application of the control-chart-based method in a thermal cycling reliability study is described. The reported time-to-failure data were then compared based on four different failure criteria: …

Sustainable Business Development: An Irish Perspective, Tony Kealy

Conference Papers

This research investigates the current status of sustainable business development practises in Ireland using qualitative analysis on data obtained from semi-structured interviews. The thirteen interviewees were chosen to represent a wide spectrum of influential organisations in Irish society and included private businesses, charity organisations, faith-based organisations, farmer associations, and government representatives. Analysis of the findings confirmed that the three well established key elements that must be considered if businesses are to be developed in a sustainable way, namely Profit, People, and Planet are still valid. However, this research also found that there were other elements important for developing sustainable business. …

Microstructure Development Of Granular System During Compaction, Chen Shang, Marcial Gonzalez

The Summer Undergraduate Research Fellowship (SURF) Symposium

Granular materials is the second most manipulated material in the industry today. They are easy to transport and more and more newly developed materials cannot stand the process of traditional casting, like energetic materials and bio-materials, but will survive the powder compaction process. Having a better understanding of the microstructure development of granular systems during compaction process, especially for particles that will heavily deform under loading, will give an insight of how to better process the powders to produce materials with overall better performance comparing to bulk materials. The main theory and mechanism applied are Hertz law and nonlocal contact …

A Mechanical Testing Methodology For Additive Manufacturing Processes, Sujitkumar Dongare, Todd E. Sparks, Joseph William Newkirk, Frank W. Liou

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Most additive manufacturing processes are layer-by-layer deposition, thus its mechanical properties could be very different than those made from traditional manufacturing processes. This paper summarizes a mini-tensile testing methodology for additive manufacturing. Research concerning the tensile testing of metallic material has been conducted and test methods have been defined. It encompasses the methods for determination of yield strength, yield point elongation, tensile strength, elongation, and reduction of area. The study of positional variation and cooling-rate dependency in case of additive manufacturing proves to be expensive and time consuming with the full-size test specimens. Thus, this paper discussed a technique for …

Investigation Of Forged-Like Microstructure Produced By A Hybrid Manufacturing Process, Romy Francis, Joseph William Newkirk, Frank W. Liou

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Laser Metal Deposition (LMD) is an additive manufacturing technique for manufacturing complex near net shaped components. The grain size of the typical deposition microstructure in case of Ti-6Al-4V can range between 100µm-600µm, which is much larger than that of forged-like microstructures. Friction Stir Processing (FSP) has been investigated as a method for surface modification to form refined microstructure at the surface of the Ti-6Al-4V components manufactured from the LMD method. Integration of FSP and LMD can greatly improve the product properties. Friction stir processing of the laser deposited Ti-6Al-4V deposits was performed and optimum processing parameters were obtained using this …

Thermographic Investigation Of Laser Metal Deposition, Sreekar Karnati, Todd E. Sparks, Frank W. Liou

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Primitive stages of studies on and with additive manufacturing techniques popularly involve thin wall geometry. In the current effort attempts were made to capture various thermal aspects during deposition of a thin wall geometry. The thermo-graphic data was captured using a FLIR A615 infrared camera. Post processing using edge detection algorithms and image processing techniques, the geometric and thermal aspects of meltpool and tail of the meltpool were obtained. The effect of geometry and power on shape of the meltpool and its tail were obtained. The depositions of SS 316 with varying power. These observations were discussed and analyzed in …