Mechanical Engineering Commons^™

Thermally Developing Flow And Heat Transfer In Rectangular Microchannels Of Different Aspect Ratios, Poh-Seng Lee, S V. Garimella

CTRC Research Publications

Laminar convective heat transfer in the entrance region of microchannels of rectangular cross-section is investigated under circumferentially uniform wall temperature and axially uniform wall heat flux thermal boundary conditions. Three-dimensional numerical simulations were performed for laminar thermally developing flow in microchannels of different aspect ratios. Based on the temperature and heat flux distributions obtained, both the local and average Nusselt numbers are presented graphically as a function of the dimensionless axial distance and channel aspect ratio. Generalized correlations, useful for the design and optimization of microchannel heat sinks and other microfluidic devices, are proposed for predicting Nusselt numbers. The proposed …

High Temperature Heat Exchanger Project: Quarterly Progress Report October 1, 2005 Through December 31, 2005, Anthony Hechanova

Publications (NSTD)

• Liquid Salt Technical Working Group Meeting. The first meeting of the Liquid Salt Technical Working Group was held on October 28, 2005 at the Pratt Whitney Rocketdyne facility in Canoga Park, CA. 20 experts from academia, industry, and national laboratories participated to discuss current state of knowledge and research needs for high temperature liquid salt applications.
• Nuclear Hydrogen Initiative Semi-annual Review. Several participants from the UNLVRF University Consortium gave technical presentations at the NHI Semi-annual Review meeting in Rockville, MD, November 9-10, 2005.
• Quarterly Collaboration Meeting. The University of Nevada, Las Vegas hosted a UNLVRF HTHX Project quarterly meeting December …

Application Of An Hp-Adaptive Finite Element Method For Thermal Flow Problems, Xiuling Wang, Darrell Pepper

Mechanical Engineering Faculty Research

Numerical results are presented for a set of convective thermal flow problems using an hp-adaptive finite element technique. The hp-adaptive model is based on mesh refinement and spectral order incensement to produce enhanced accuracy while attempting to minimize computational requirements. An a-posteriori error estimator based on the L₂ norm is employed to guide the adaptation procedure. Example test cases consisting of natural convection in a differentially heated enclosure, flow with forced convection heat transfer over a backward facing step and natural convection within an enclosed partition are presented. Numerical results are compared with published data in the …

Cool Flames At Terrestrial, Partial, And Near-Zero Gravity, Michael R. Foster, Howard Pearlman

Faculty Publications - Biomedical, Mechanical, and Civil Engineering

Natural convection plays an important role in all terrestrial, Lunar, and Martian-based, unstirred, static reactor cool flame and low-temperature autoignitions, since the Rayleigh number (Ra) associated with the self-heating of the reaction exceeds the critical Ra (approximately 600) for onset of convection. At near-zero gravity, Ra < 600 can be achieved and the effects of convection suppressed. To systematically vary the Ra without varying the mixture stoichiometry, reactor pressure, or vessel size, cool flames are studied experimentally in a closed, unstirred, static reactor subject to different gravitational accelerations (terrestrial, 1g; Martian, 0.38g; Lunar, 0.16g; a n dr e - duced gravity, ∼10−2g). Representative results show the evolution of the visible light emission using an equimolar n-butane:oxygen premixture at temperatures ranging from 320 to 350 ◦C (593–623 K) at subatmospheric pressures. For representative reduced-gravity, spherically propagating cool flames, the flame radius based on the peak light intensity is plotted as a function of time and the flame radius (and speed) is calculated from a polynomial fit to data. A skeletal chemical kinetic Gray-Yang model developed previously for a one-dimensional, reactive– diffusive system by Fairlie and co-workers is extended to a two-dimensional axisymmetric, spherical geometry. The coupled species, energy, and momentum equations are solved numerically and the spatio-temporal variations in the temperature profiles are presented. A qualitative comparison is made with the experimental results.

Transient Heat Partition Factor For A Sliding Railcar Wheel, T C. Kennedy, C Plengsaard, Robert F. Harder

Faculty Publications - Biomedical, Mechanical, and Civil Engineering

During a wheel slide the frictional heat generated at the contact interface causes intense heating of the adjacent wheel material. If this material exceeds the austenitising temperature and then cools quickly enough, it can transform into martensite, which may ultimately crack and cause wheel failure. A knowledge of the distribution of the heat partitioned into the wheel and the rail and the resulting temperature fields is critical to developing designs to minimize these deleterious effects. A number of theoretical solutions have appeared in the literature to model the thermal aspects of this phenomenon. The objective of this investigation was to …

Magnetohydrodynamic Simulation Of Electromagnetic Pump In Tc-1, Lillian J. Ratliff

Reactor Campaign (TRP)

The pilot molten lead-bismuth target circuit (TC-1) in university of Nevada Las Vegas (UNLV) was designed for beam power of 1 MW accelerator driven system (ADS). The TC-1 is a liquid lead-bismuth eutectic (LBE) circulation loop. Circulation of the liquid alloy is driven by an annular linear induction pump (ALIP). Experimental measurements of system parameters have yielded a surprisingly low pump efficiency of less than 1%. A numerical study of the pump efficiency is being conducted to determine which operational parameters are responsible for this low efficiency and to give insight into future EM pump design. The numerical study will …

Including Embodied Energy Considerations At The Conceptual Stage Of Building Design, Y. Yohanis, Brian Norton

Articles

Elevated operating temperatures reduce the solar to electrical conversion efficiency of building integrated photovoltaic devices (BIPV). Phase change materials (PCM) can be used to passively limit this temperature rise although their effectiveness is limited by their low thermal conductivities and by crystallization segregation during solidification. This paper presents an experimental evaluation of the effects of convection and crystalline segregation in a PCM as a function of efficiency of heat transfer within the finned PV/PCM system. The thermal performances of bulk PCM with crystallization segregation for different internal fin arrangements are presented. It is noted that the addition of internal fins …

Performance Measurements Of Direct Air Injection In A Cavity-Based Flameholder For A Supersonic Combustor, Scott G. Edens

Theses and Dissertations

For several years the Air Force Research Lab Propulsion Directorate has been studying the difficulties in fueling supersonic combustion ramjet engines with hydrocarbon based fuels. Recent investigations have focused on the use of direct air injection into a directly-fueled cavity-based flameholder. Direct air injection has been shown qualitatively to be a valuable tool for improving cavity combustion. Little quantitative data is available that characterizes the performance of cavity-based flameholders. The objective of this research was to quantitatively determine the specific advantages and disadvantages of the direct air injection scheme. This was accomplished via intrusive probing into a supersonic free stream …

High Temperature Heat Exchanger Project: Quarterly Progress Report July 1, 2005 Through September 30, 2005, Anthony Hechanova

Publications (NSTD)

Quarterly Collaboration Meeting. The University of California, Berkeley, hosted a UNLVRF HTHX Project quarterly meeting on September 12. The purpose of the meeting was to promote collaboration and communication among the UNLV Research Foundation partners. Collaborators discussed their research program plan and provided an update on their progress. The next meeting will be in December in Las Vegas, NV hosted by UNLV.

High Temperature Heat Exchanger Project: Quarterly Progress Report April 1, 2005 Through June 30, 2005, Anthony Hechanova

Publications (NSTD)

Quarterly Collaboration Meeting. General Atomics hosted a UNLVRF HTHX Project quarterly meeting on June 5 in San Diego, California. The purpose of the meeting was to promote collaboration and communication among the UNLV Research Foundation partners. Collaborators had the opportunity to discuss their research program plan and update their progress. The next meeting will be in September in Berkeley hosted by UC Berkeley.

HTHX Computational Design (UNLV). Work on optimizing the ceramic offset strip in compact HTHX design through parametric studies was performed and completed. A simple single channel model was used to perform parametric studies on dimensions and flow …

Stability Of Transport And Rate Processes [Review], Yaşar Demirel

Papers in Thermal Mechanics

About fifty years ago, the Turing instability demonstrated that even simple reaction-diffusion systems might lead to spatial order and differentiation, while the Rayleigh-Bénard instability showed that the maintenance of nonequilibrium might be the source of order in fluids subjected to a thermodynamic force above a critical value. Therefore, distance from global equilibrium in the form of magnitude of a thermodynamic force emerges as another constraint of stability; some systems may enhance perturbations, and evolve to highly organized states called the dissipative structures after a critical distance on the thermodynamic branch. Although the kinetics and transport coefficients represent short-range interactions, chemical …

A Novel Hybrid Heat Sink Using Phase Change Materials For Transient Thermal Management Of Electronics, Shankar Krishnan, S V. Garimella, S. S. Kang

CTRC Research Publications

A hybrid heat sink concept which combines passive and active cooling approaches is proposed. The hybrid heat sink is essentially a plate fin heat sink with the tip immersed in a phase change material (PCM). The exposed area of the fins dissipates heat during periods when high convective cooling is available. When the air cooling is reduced, the heat is absorbed by the PCM. The governing conservation equations are solved using a finite-volume method on orthogonal, rectangular grids. An enthalpy method is used for modeling the melting/re-solidification phenomena. Results from the analysis elucidate the thermal performance of these hybrid heat …

Mercury Experience And Capabilities, University Of North Dakota. Energy And Environmental Research Center

EERC Brochures and Fact Sheets

Brochure about the Energy & Environmental Research Center’s (EERC’s) mercury research capabilities. Describes the EERC facilities and mercury testing technology. [This item is an outdated or superseded version and retained for historical purposes only. It may no longer reflect current information, policies, or practices.]

Induction Heating Of Thin Films, Paul L. Bergstrom, Melissa L. Trombley

Michigan Tech Patents

A method of performing regional heating of a system having a substrate. The method may include applying a thin film to the system, and controllably energizing a coil positioned near the thin film. The energized coils thereby generate a magnetic flux. The method further includes inducing a current in the thin film with the magnetic flux thereby heating the system.

High Temperature Heat Exchanger Project:Quarterly Progress Report January 1, 2005 Through March 31, 2005, Anthony Hechanova

Publications (NSTD)

Quarterly Collaboration Meeting. Ceramatec, Inc. hosted a UNLVRF HTHX Project quarterly meeting on March 17 in Salt Lake City, Utah. The purpose of the meeting was to promote collaboration and communication among the UNLV Research Foundation partners. Collaborators had the opportunity to discuss their research program plan and update their progress. The next meeting will be in June in San Diego City hosted by General Atomics.

An Existing Global Heptane Mechanism Augmented With Diffusive Transport, Michael R. Foster, Howard Pearlman

Faculty Publications - Biomedical, Mechanical, and Civil Engineering

The couplings between diffusive transport and the temperature and species concentration distributions associated with low and intermediate temperature heptane oxidation are explored using an existing four-step heptane mechanism, tuned for elevated pressures. The energy and species concentration equations are augmented with diffusive fluxes for heat and species and solved numerically in a one-dimensional domain. The ignition delay times are also tabulated and compared with the zero-dimensional data reported in the literature.

Quantifying Savings From Improved Boiler Operation, Kevin Carpenter, J. Kelly Kissock

Mechanical and Aerospace Engineering Faculty Publications

On/off operation and excess combustion air reduce boiler energy efficiency. This paper presents methods to quantify energy savings from switching to modulation control mode and reducing excess air in natural gas fired boilers.

The methods include calculation of combustion temperature, calculation of the relationship between internal convection coefficient and gas flow rate, and calculation of overall heat transfer assuming a parallel-flow heat exchanger model. The method for estimating savings from changing from on/off to modulation control accounts for purge and drift losses through the boiler and the improved heat transfer within the boiler due to the reduced combustion gas flow …

Application Of Meshless Methods For Thermal Analysis, Darrell Pepper, Bozidar Sarler

Mechanical Engineering Faculty Research

Many numerical and analytical schemes exist for solving heat transfer problems. The meshless method is a particularly attractive method that is receiving attention in the engineering and scientific modeling communities. The meshless method is simple, accurate, and requires no polygonalisation. In this study, we focus on the application of meshless methods using radial basis functions (RBFs) — which are simple to implement — for thermal problems. Radial basis functions are the natural generalization of univariate polynomial splines to a multivariate setting that work for arbitrary geometry with high dimensions. RBF functions depend only on the distance from some center point. …

Coupled Thermal Fluid Modelling Of A Low Embedded Energy Solar Thermal Collector, Myrrha Corcoran

Theses

Flat-plate collectors are the most economical and are popular in solar domestic heating water system since they are usually permanently fixed in position, have simple construction, and require little maintenance. The design of a solar energy system is generally concerned with obtaining maximum efficiency at minimum cost. The aim of this thesis was to develop a mathematical model, for a forced convection solar heated water system. The solar collector in this study incorporated a honeycombed extruded polycarbonate structure, for both the cover and water channels.

A very detailed thermal analysis of the flat-plate solar collector was carried out to predict …

Mechanics Of Composite Materials In Fuel Cell Systems, Kenneth Reifsnider, Xinyu Huang, G. Ju, Matthew Feshler, K. An

Faculty Publications

The science and technology that are fundamental to the concept of composite materials are also the foundation for the construction and function of fuel cells and fuel cell systems. The present paper outlines this relationship in the context of the physics and chemistry that are enabled by the specific selection and arrangement of constituents of the “functional composite” fuel cell. General principles of operation are described, and fundamental issues are defined that must be addressed by the composites community if the fuel cell science and engineering is to advance. Examples of several types of functional composite fuel cells are presented, …

P-Version Time-Discontinuous Galerkin's Method For Nonlinear Transient Heat Transfer Analysis And Sensitivity Analysis, Ta-Cheng Chien

Mechanical & Aerospace Engineering Theses & Dissertations

The finite element method is a powerful tool for approximating the solution of most engineering problems. Traditionally, the finite element method uses linear approximation of field variables over each element, where numerical results converge to the exact solution by increasing the number of elements. A newer finite element method called the p-version finite element method uses higher-order elements which assume a polynomial of order p for the approximation on each element. Here, the approximation will achieve accuracy without increasing the number of elements but by increasing the value of order p.

The focus of this research is on …

Transient Non-Linear Heat Conduction Solution By A Dual Reciprocity Boundary Element Method With An Effective Posteriori Error Estimator, Eduardo Divo, Alain J. Kassab

Publications

A Dual Reciprocity Boundary Element Method is formulated to solve non-linear heat conduction problems. The approach is based on using the Kirchhoff transform along with lagging of the effective non-linear thermal diffusivity. A posteriori error estimate is used to provide effective estimates of the temporal and spatial error. A numerical example is used to demonstrate the approach.

High Temperature Heat Exchanger Project: Quarterly Progress Report October 1, 2004 Through December 31, 2004, Anthony Hechanova

Publications (NSTD)

UNLV hosted an NHI Systems Interface Meeting on Dec. 16 and a UNLVRF HTHX Kickoff Meeting on Dec. 17. The purpose of the meetings was to coordinate the FY05 research and development effort of the UNLV Research Foundation portion of the Nuclear Hydrogen Initiative among the DOE, national program technical directors and the UNLVRF collaborators. Collaborators also had the opportunity to discuss their research program plan and update their progress. It was decided that these type of collaboration meetings were very useful and they will be held quarterly at the various collaborator sites. The next meeting will be in March …

Thermodynamic Analysis Of Separation Systems, Yaşar Demirel

Papers in Thermal Mechanics

Separation systems mainly involve interfacial mass and heat transfer as well as mixing. Distillation is a major separation system by means of heat supplied from a higher temperature level at the reboiler and rejected in the condenser at a lower temperature level. Therefore, it resembles a heat engine producing a separation work with a rather low efficiency. Lost work (energy) in separation systems is due to irreversible processes of heat, mass transfer, and mixing, and is directly related to entropy production according to the Gouy-Stodola principle. In many separation systems of absorption, desorption, extraction, and membrane separation, the major irreversibility …

Exergy Use In Bioenergetics, Yaşar Demirel

Papers in Analytical Chemistry

Every developed and adapted biological system extracts useful energy from outside, converts, stores it, and uses for muscular contraction, substrate transport, protein synthesis, and other energy utilizing processes. This energy management in a living cell is called the bioenergetics, and the useful energy is the exergy, which is destroyed in every irreversible process because of the entropy production. The converted exergy is the adenosine triphosphate (ATP) produced through the oxidative phosphorylation coupled to respiration in which the exergy originates from oxidation of reducing equivalents of nutrients. A living cell uses the ATP for all the energy demanding activities; it has …

In-Drift Natural Convection And Condensation, Stephen W. Webb, Phillip Rogers, John Del Mar, Darrell Svalstad, Cliff Howard, Ernest Hardin, Bechtel Saic Company, Llc

Publications (YM)

The Yucca Mountain repository configuration consists of waste packages stored inside of underground tunnels, or drifts. The waste packages generate heat due to radioactive decay, and moisture flows into and out of the drifts in liquid and vapor form. Heat and mass transfer within the drifts, including interaction with the surrounding rock, are potentially important processes for the performance of the repository. The present report documents models for in-drift heat and mass transfer during the post-closure period. Pre-closure, or ventilated, conditions are documented in a separate report (BSC 2004 [DIRS 169862]).

High Temperature Heat Exchanger Project: Quarterly Progress Report July 1, 2004 Through September 30, 2004, Anthony Hechanova

Publications (NSTD)

UNLV hosted a meeting on NHI Materials and Heat Exchanger Design on Monday, May 17. Paul Pickard (Sandia National Lab) and Bill Corwin (Oak Ridge National Lab) facilitated the meeting. The purpose of the meeting was to summarize the hydrogen materials and heat exchanger requirements and priorities for UNLV staff and their collaborators to support the research proposal solicitation for the UNLV Research Foundation HTHX program. Attendance was heavier than anticipated and required a change of venue to accommodate the crowd of over 30.

High Temperature Heat Exchanger Project: Quarterly Progress Report April 1, 2004 Through June 30, 2004, Anthony Hechanova

Publications (NSTD)

UNLV hosted a meeting on NHI Materials and Heat Exchanger Design on Monday, May 17. Paul Pickard (Sandia National Lab) and Bill Corwin (Oak Ridge National Lab) facilitated the meeting. The purpose of the meeting was to summarize the hydrogen materials and heat exchanger requirements and priorities for UNLV staff and their collaborators to support the research proposal solicitation for the UNLV Research Foundation HTHX program. Attendance was heavier than anticipated and required a change of venue to accommodate the crowd of over 30.

Numerical Study Of Combustion Of Hydrogen And Ethylene In A Two-Dimensional Dual-Mode Scramjet Combustor, Robert A. Carson

Mechanical & Aerospace Engineering Theses & Dissertations

This thesis presents computational fluid dynamics results for two-dimensional flow geometries utilizing two fuels, hydrogen (H2) and ethylene (C2H4). Upstream interaction was evident with the use of both fuels due in part to recirculation in the combustor, the inlet pressures and the combustion process. Results were obtained for hydrogen using a reduced chemical kinetic model while results obtained for ethylene employed a reduced chemical kinetic model as well as an expanded chemical kinetic model.

Initially, an examination of grid composition was conducted in order to select the most numerically efficient and accurate grid for reacting flow in the current combustor …

High Temperature Heat Exchanger Project: Quarterly Progress Report January 1, 2004 Through March 31, 2004, University Of Nevada, Las Vegas. Research Foundation, Robert F. D. Perret

Publications (NSTD)

Mutually satisfactory language has been developed to permit signing of a subcontract between the General Atomics Corporation and the UNLV Research Foundation. The contract is signed.