Mechanical Engineering Commons^™

Laminar And Turbulent Study Of Combustion In Stratified Environments Using Laser Based Measurements, Stephen William Grib

Theses and Dissertations--Mechanical and Aerospace Engineering

Practical gas turbine engine combustors create extremely non-uniform flowfields, which are highly stratified making it imperative that similar environments are well understood. Laser diagnostics were utilized in a variety of stratified environments, which led to temperature or chemical composition gradients, to better understand autoignition, extinction, and flame stability behavior. This work ranged from laminar and steady flames to turbulent flame studies in which time resolved measurements were used.

Edge flames, formed in the presence of species stratification, were studied by first developing a simple measurement technique which is capable of estimating an important quantity for edge flames, the advective heat …

NoX Formation In Light-Hydrocarbon, Premixed Flames, Robert T. Hughes

Theses and Dissertations--Mechanical and Aerospace Engineering

This study explores the reactions and related species of NO_x pollutants in methane flames in order to understand their production and consumption during the combustion process. To do this, several analytical simulations were run to explore the behavior of nitrogen species in the pre-flame, post- flame, and reaction layer regions. The results were then analyzed in order to identify all "steady-state" species in the flame as well as the determine all the unnecessary reactions and species that are not required to meet a defined accuracy. The reductions were then applied and proven to be viable.

Characterization Of Methane-Air Diffusion Flames For Flame Synthesis Application Through Optical Diagnostics, Zhaojin Diao

Theses and Dissertations--Mechanical and Aerospace Engineering

Flame synthesis is a growing field of research aiming at forming new materials and coatings through injection of seed materials into a flame. Accurate prediction of the thermal structure of these flames requires detailed information on the radiative properties and a thorough understanding of the governing combustion processes. The objective of this work is to establish a basic optical diagnostic characterization of different methane-air diffusion flames of different complexity. The basic principles are developed and demonstrated at a rotational symmetric co-flow burner and finally applied to a burner consisting of six clustered microflames which is designed for future flame synthesis …

The Kentucky Re-Entry Universal Payload System (Krups): Sub-Orbital Flights, James Devin Sparks

Theses and Dissertations--Mechanical and Aerospace Engineering

The Kentucky Re-entry Universal Payload System (KRUPS) is an adaptable testbed for atmosphere entry science experiments, with an initial application to thermal protection systems (TPS). Because of the uniqueness of atmospheric entry conditions that ground testing is unable to replicate, scientists principally rely on numerical models for predicting entry conditions. The KRUPS spacecraft, developed at the University of Kentucky, provides an inexpensive means of obtaining validation data to verify and improve these models.

To increase the technology readiness level (TRL) of the spacecraft, two sub-orbital missions were developed. The first mission, KUDOS, launched August 13th, 2017 on a Terrier-Improved Malamute …

Multiphase Interaction In Low Density Volumetric Charring Ablators, Ali D. Omidy

Theses and Dissertations--Mechanical and Aerospace Engineering

The present thesis provides a description of historical and current modeling methods with recent discoveries within the ablation community. Several historical assumptions are challenged, namely the presence of water in Thermal Protection System (TPS) materials, presence of coking in TPS materials, non-uniform elemental production during pyrolysis reactions, and boundary layer gases, more specifically oxygen, interactions with the charred carbon interface.

The first topic assess the potential effect that water has when present within the ablator by examining the temperature prole histories of the recent flight case Mars Science Laboratory. The next topic uses experimental data to consider the instantaneous gas …

Investigation Of Combustion Characteristics Of A Heavy-Duty Diesel Engine Retrofitted To Natural Gas Spark Ignition Operation, Jinlong Liu

Graduate Theses, Dissertations, and Problem Reports (ETD)

The conversion of existing diesel engines to natural-gas spark ignition operation by adding a gas injector in the intake manifold for fuel delivery and replacing the diesel fuel injector with a spark plug to initiate and control the combustion process can reduce U.S. dependence on petroleum imports and curtail engine-out emissions. As the conventional diesel combustion chamber (i.e., flat head and bowl-in-piston) creates high turbulence, the engine can operate leaner, which would increase its efficiency and reduce emissions. However, natural gas combustion in such retrofitted engines presents differences compared to that in conventional spark ignited engines. Subsequently, the main goal …

Capillary-Assisted Enhanced Condensation Heat Transfer For Low Surface Tension Liquids, Gnana Vishnu Durgam

Dissertations, Master's Theses and Master's Reports

Extensive research has been carried out over the course of the last few decades to induce dropwise condensation as it offers 5 - 7 times better heat transfer performance compared to filmwise condensation process. A number of methods such as low surface energy hydrophobic coatings, surface modification of hydrophobic surfaces to fabricate micro, nano and hierarchical structures, and the recent incorporation of jumping droplet phenomenon have provided effective means to further enhance the condensation heat transfer. However, existing methods to enhance condensation heat transfer rate fail in the case of low surface tension, highly wetting liquids such as hydrocarbons, cryogens, …

Investigation On The Potential Of A Co2 Capture System, Downstream Of The Aftertreatment System For A Heavy-Duty Engine Application, Murchana Pathak

Dissertations, Master's Theses and Master's Reports

The transportation sector accounts for the second largest source of CO₂ emissions after power generation. New Corporate Average Fuel Economy (CAFE) regulations are focusing on improving energy through reduced fuel consumption and greenhouse gas emissions. This work investigates the potential of a CO₂ capture system downstream of an aftertreatment system for a heavy-duty engine application. Amine absorption has been described as one of the most effective ways to capture CO₂ from the exhaust for point sources. Therefore, using thermal-swing absorption process with potassium carbonate (K₂CO₃) as the absorbent liquid, a process was analyzed …

A New Technique To Determine Accommodation Coefficients Of Cryogenic Propellants, Kishan Bellur

Dissertations, Master's Theses and Master's Reports

The control of propellant boil-off is essential in long-term space missions. However, a clear understanding of cryogenic propellant phase change and the values of accommodation coefficients are lacking. To that effect, a new method to determine accommodation coefficients using a combination of neutron imaging, thin film evaporation modeling and CFD modeling has been established. Phase change experiments were conducted in the BT-2 Neutron Imaging Facility at the National Institute of Standards and Technology (NIST) by introducing cryogenic vapor (H2 and CH4) at a set pressure into Al6061 and SS316L test cells placed inside a 70mm cryostat. Condensation is achieved by …

Experimental And Computational Investigation Of Dual Fuel Diesel- Natural Gas Rcci Combustion In A Heavy-Duty Diesel Engine, Mufaddel Dahodwala

Dissertations, Master's Theses and Master's Reports

Among the various alternative fuels, natural gas is considered as a leading candidate for heavy-duty applications due to its availability and applicability in conventional internal combustion diesel engines. Compared to their diesel counterparts natural gas fueled spark-ignited engines have a lower power density, reduced low-end torque capability, limited altitude performance, and ammonia emissions downstream of the three-way catalyst. The dual fuel diesel/natural gas engine does not suffer with the performance limitations of the spark-ignited concept due to the flexibility of switching between different fueling modes. Considerable research has already been conducted to understand the combustion behavior of dual fuel diesel/natural …

Design And Development Of Test Rigs To Experimentally Investigate Flow Loss And Heat Transfer In A Stirling Engine Heater Head, Pawan K. Yadav

Graduate Theses, Dissertations, and Problem Reports (ETD)

The Stirling engines are attractive alternative for combined heat and power (CHP) systems, especially for high efficiency power generation using different heat sources. The hot side heat exchanger or heater head (HH) is one of the indispensable components of Stirling engines which transfers the heat from outside of the system into the working fluid. For development of a low cost, highly efficient and reliable CHP system, a novel HH has been designed and additively manufactured from Inconel 625. For the investigation of flow loss and heat transfer through this Stirling engine heater head, two benchtop test rigs were designed, developed, …

Effects Of Air-Fuel Ratio And Operating Conditions On Particle Emissions From A Small Diesel Engine, Odinmma John-Paul Ofili

Master’s Theses

Automotive engineers typically increase the air-fuel ratio (AFR) of an engine to control the amount of smoke emitted, but it not quite known how this process affects particulate number (PN). In the work presented, AFR was independently varied to study its effects on PN. It was found that increasing the AFR reduced the concentrations of larger particles from 10⁸ #/cm³ to 10⁶ #/cm³ which is an effect observable as a reduction in smoke. However, the same increases in AFR only resulted in an energy specific PN change from 10¹⁵ #/kWh to 10¹⁴ #/kWh. The …

Spacecraft Fire Safety Research: Combustion Of Lithium-Ion Batteries To Predict Fire Scenarios, Elisabeth Meyer

Williams Honors College, Honors Research Projects

The purpose of this project was to research characteristics of a Lithium-ion battery fire to determine if trends exist in measured fire characteristics that can help predict different fire scenarios. These experiments will ultimately aid in developing an alarm threshold for a spacecraft smoke detector, specifically for Orion, a new, multi-purpose crew vehicle under development by NASA. Orion is the next-generation of spacecraft designed to replace the space shuttle and will play an important role in NASA’s journey to Mars.

In the experiments performed, Lithium-ion batteries were placed in a test chamber and ignited while smoke concentration was measured, simulating …

Cold Start Analysis And Modeling Of A Direct-Injection Gasoline Engine, Yash Borghate

Dissertations, Master's Theses and Master's Reports

In this thesis, two different works related to cold start of a direct-injection (DI) gasoline engine are shown. First, effect of split injection is studied on engine exhaust temperature and hydrocarbon emissions for cold start conditions. Instead of single injection, two injections are done, one injection during the intake stroke and one injection during the compression stroke. Split injection is known to reduce jet wall wetting, thus reducing the hydrocarbon emissions from engine itself. Further, split injection reduces engine cycle-by-cycle variability with respect to the single injection case. Correlations between start of injection for the injection in the intake stroke …

An Experimental And Computational Study Of Fuel Spray Interaction: Fundamentals And Engine Applications, Le Zhao

Dissertations, Master's Theses and Master's Reports

An efficient spray injection results in better vaporization and air-fuel mixing, leading to combustion stability and reduction of emissions in the internal combustion (IC) engines. The impingement of liquid fuels on chamber wall or piston surface in IC engines is a common phenomenon and fuel film formed in the spray-piston or cylinder wall impingement plays a critical role in engine performance and emissions. Therefore, the study of the spray impingement on the chamber wall or position surface is necessary.

To understand the spray-wall interaction, a single droplet impingement on a solid surface with different conditions was first examined. The droplet-wall …

Spray And Combustion Studies Of High Reactivity Gasoline In Comparison To Diesel Under Advanced Compression Ignition Engine Conditions, Meng Tang

Dissertations, Master's Theses and Master's Reports

Gasoline compression ignition (GCI) technology has demonstrated great potentials in improving fuel economy and reducing engine-out NO_x and particulate matter emissions. Development and application of the GCI technology on multi-cylinder engines require both fundamental understandings of the gasoline spray combustion characteristics and accurate numerical tools. Due to the large differences in the thermo-physical and the chemical properties between gasoline and diesel range fuels, differences in the spray combustion characteristics between gasoline and diesel is expected. Reports on the gasoline spray combustion characteristics under conditions relevant to medium to heavy-duty engines are scarce and this dissertation aims to fill in …

Thermomagnetic Convective Cooling Of Hall Effect Thruster, Elizabeth M. Vanheusden

Dissertations, Master's Theses and Master's Reports

This work proposes and shows that thermomagnetic convection could be used in zero gravity to cool components of a Hall-effect thruster. A ferrofluid cavity was develop in the thermal and geometric model of a Hall-effect thruster. Simulations show that with an Ionic Liquid Ferrofluid after two minutes of thruster operations thermomagnetic convection occurs and in zero gravity will produce a larger velocity then natural convection that occurs in earth gravity. However, experiments did not result in heat transfer enhancement due to the limitation of the ferrofluid. Replacement of the Ferrotec EFH1 dispersant with dodecylbenzene did not result in Ionic Liquid …

Experimental Investigation Of Impinged Droplet Dynamics, Nitisha Ahuja

Dissertations, Master's Theses and Master's Reports

The fuel spray wall interaction phenomenon plays an essential role in determining the emissions and performance of an internal combustion engine. The investigation of single droplet wall interaction is crucial to understanding of a spray wall impingement process. This report is a compilation of the experimental work done to understand the droplet impingement characteristics, through optical diagnostics and temperature measurement. Different fuels and different surface under ambient and elevated temperature conditions are used for these tests, with two objectives: Development of a common depositionsplashing criteria; and Understanding droplet post impingement dynamics variation with factors like: Weber number (ratio of inertia …

Analysis Of Injection Parameters Influencing Gasoline Direct Injection Compression Ignition (Gdici) Engine Operation In Ltc Using Naphtha, Devyani Patil

Dissertations, Master's Theses and Master's Reports

A multi-dimensional CFD study using MTU-KIVA-Geq-CHEMKIN code has been carried out for direct injection compression ignition engine combustion fueled with heavy naphtha, light naphtha, and PRF50 in low-temperature combustion (LTC) regime. At constant fueling, combustion characteristics are investigated as a function of injection timing and injection pressure. Further, operating limits of fuel confined by combustion efficiency, noise level (Maximum Pressure rise rate) and emissions at exhaust valve opening (EVO) are evaluated using parametric variation of initial gas temperature, exhaust gas recirculation fraction, boost pressure. Research conducted focuses on ability of fuel to get good combustion which is combustion efficiency > / …

Simulation Of An Ethylene Flame With Turbulence, Soot And Radiation Modeling, Santu Golder

Electronic Theses and Dissertations

This thesis will investigate soot models that are available in commercial codes. We will look at the effect of turbulence models, gravity, soot models and radiation. Simulations will be compared to Coppalle and Joyeux [1]. The flame is an ethylene air diffusion flame at a Reynolds number of 5700. Simulations show the SST turbulence model, one-step soot model and Rosseland radiation model including gravity agree well with experimental data (temperature and soot). Flamelet soot modeling from Carbonell et al. [2] and flamelet radiation modeling from Doom [3] has been incorporated and compared as well.

Reduced Exhaust Emissions Through Blending N-Butanol With Ultra Low Sulfur Diesel And Synthetic Paraffinic Kerosene In Reactivity Controlled Compression Ignition Combustion, Remi Gaubert

College of Graduate Studies: Theses & Dissertations

Increasing restrictions on the emitted exhaust emissions in diesel engines are becoming a more challenging task than in previous years. An electronic common rail fuel injection system and a port fuel injection (PFI) system were developed for an experimental engine to research dual fuel combustion. The experimental research was conducted at 1500 rpm and 4, 5, and 6 bar indicated mean effective pressure (IMEP). n-Butanol was port fuel injected at a 60% by mass fraction coupled with direct injection (DI) of three fuels, including ultra-low sulfur diesel (ULSD RCCI), a 50-50 wt-% blend of ULSD and butanol (ULSD-Bu RCCI), and …

An Experimental Investigation Of The Cooling System For A Free Piston Stirling Engine, Akshay Milind Gupte

Graduate Theses, Dissertations, and Problem Reports (ETD)

Free-Piston Stirling Engine (FPSE) has been identified as a good candidate for combined heat and power application (CHP). FPSE being highly efficient and environmentally friendly promises to facilitate the increasing demand in waste heat energy recovery systems. FPSE system consists of three important components: (1) hot side heat exchanger; (2) regenerator; and (3) cold side heat exchanger. The cold side heat exchanger is a crucial part as it enables to maintain an optimal temperature of the working fluid by rejecting heat.

This research contributes to the design of heat exchanger test rig and experimental measurement of cooling heat exchanger. The …

Experimental Design, Testing, And Evaluation Of Methods To Improve The Efficiency And Reduce Emissions From A Small Two-Stroke Natural Gas Engine, Christopher Joseph Ulishney

Graduate Theses, Dissertations, and Problem Reports (ETD)

Decentralized power generation is a research area of interest due to possible improvements in electrical generation efficiency and grid resilience. Two-stroke engines are simple, inexpensive, power dense systems that could serve as the prime-movers for combined heat and power (CHP) systems. In addition, such systems could be fueled on natural gas (NG) that is readily available to serve as a reliable fuel source in most households. However, most two-stroke engines are inefficient and produce excessive emissions. This research focused on methods to simultaneously improve engine efficiency and decrease emissions from a 34 cc air-cooled, two-stroke engine retrofitted to operate on …

Impact Of Flow Direction On Local Flow Behavior In Biologically-Inspired Flow Passages, Derrick Dewayne Herrin

Honors College Theses

ABSTRACT

A computational fluid dynamics model was utilized to study the effect of flow direction on local flow behavior in biologically-inspired microscale flow networks. Biologically-inspired flow networks have been found to offer numerous advantages when compared with parallel flow networks, particularly in thermal management applications. Flow behavior was examined for a range of bifurcation angles and laminar inlet Reynolds numbers. The computational model was validated with existing theoretical solutions and verified for grid independence. As the bifurcation angle increased, the pressure drop, and thus pumping power, across the biologically-inspired flow networks increased. In addition, as the inlet Reynolds number increased, …

Design And Validation Of An Experimental Setup To Study Single Phase Heat Transfer Enhancement Of Femtosecond Laser Processed Metallic Surfaces, Sarah Jane Wallis

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

In the present work, a single phase flow heat transfer experimental loop was designed with the intention of studying the effects of femtosecond laser surface processing (FLSP) on metallic surfaces with the specific goal of enhancing heat transfer in compact heat exchangers currently in use by NASA. This experimental setup went through two major design iterations which are detailed in this thesis. The first iteration consisted of a counterflow fluid-to-fluid heat exchanger, which measured overall heat transfer coefficients and pressure drops, where the overall heat transfer coefficient is defined in terms of the total thermal resistance to heat transfer between …

A Multi-Scale Approach For Modeling Shock Ignition And Burn Of Granular Hmx, Pratap Thamanna Rao

LSU Doctoral Dissertations

Deflagration-to-detonation transition (DDT) in confined, low-density granular HMX (65%-85% Theoretical Maximum Density, TMD) occurs by a complex mechanism that involves compaction shock interactions within the material. Piston driven DDT experiments indicate that detonation is abruptly triggered by the interaction of a strong burn-supported secondary shock and a piston-supported primary (input) shock, where the nature of the interaction depends on initial packing density and primary shock strength. These interactions influence transition by affecting hot-spot formation within the micro-structure during pore collapse. In this study, meso-scale simulations of hot-spot formation in shock loaded granular HMX are used to guide the development of …

Spectral Phonon Relaxation Time Calculation Tool Based On Molecular Dynamics, Divya Chalise, Tianli Feng, Xiulin Ruan

The Summer Undergraduate Research Fellowship (SURF) Symposium

Thermal conductivity is an important material property which affects the performance of a wide range of devices from thermoelectrics to nanoelectronics. Information about phonon vibration modes and phonon relaxation time gives significant insight into understanding and engineering material’s thermal conductivity. Although different theoretical models have been developed for studying phonon modes and relaxation time, extensive knowledge of lattice dynamics and molecular dynamics is required to compute phonon modal frequencies and relaxation times. Therefore, a computational tool which can take simple inputs to calculate phonon mode frequencies and relaxation time will be beneficial. Through this research work, such computational tool has …

Numerical Simulations Of Transcritical Natural Convection, Ruiwen Wei, Carlo Scalo, Mario Tindaro Migliorino, Kukjin Kim, Jean-Pierre Hickey

The Summer Undergraduate Research Fellowship (SURF) Symposium

In modern engineering applications, system overheating is a key issue that needs to be solved with efficient and reliable cooling technologies. Among the possible mechanisms that these are based on, natural convection cooling is one of the most frequently employed, with applications ranging from cooling of computer micro-components to large nuclear reactors. While many studies have been performed on natural convection employing supercritical or subcritical fluids, little attention has been given to fluids in their transcritical regime. The latter has the potential to yield high performances while avoiding detrimental effects of two-phase systems (e.g. cavitation). In the present study, 2D …

Modal Phonon Transport Across Interfaces By Non-Equilibrium Molecular Dynamics Simulation, Yang Zhong, Tianli Feng, Xiulin Ruan

The Summer Undergraduate Research Fellowship (SURF) Symposium

Phonons represent the quantization of lattice vibration, responsible for heat transfer in semiconductors and dielectrics. Phonon heat conduction across interfaces is crucially important for the thermal management of real-life devices such as smartphones, electric vehicles, and satellites. Although recent studies have broadly investigated spectral phonon contribution to lattice thermal conductivity, the mechanism of phonon modal transport across interfaces is still not well-understood. Previous models, including the acoustic mismatch model (AMM) and diffuse mismatch model (DMM), only consider elastic process while neglecting inelastic phonon contributions. Herein, we employ spectral Non-Equilibrium Molecular Dynamics Simulation (NEMD) to probe the temperature and heat flux …

Secondary Atomization: Drop Breakup In A Continuous Air Jet, Grant S. Sondgeroth, Longchao Yao, Catriona M.L. White, Daniel R. Guildenbecher, Jun Chen, Paul E. Sojka

The Summer Undergraduate Research Fellowship (SURF) Symposium

Understanding drop breakup will optimize aircraft engine performance, reduce agro-chemical overspray, and improve pharmaceutical tablet efficacy. Large fuel fragments in engines lead to lowered fuel economy and higher pollutant emissions, while small drops yield more agro-spray drift into surrounding residential and environmental zones. Better pharmaceutical tablets will improve drug uptake and patient comfort.

Engineers and scientists are currently unable to predict the number, size, and velocity of fragments formed during important drop breakup processes. Therefore, we are required to measure these quantities. We use digital inline holography (DIH) to record three-dimensional diameter and position data for fragments formed during multi-mode …