Polymer and Organic Materials Commons^™

Characterization And Modeling Of Asphalt Concrete For Dynamic Properties And Performances, A S M A. Rahman

Civil Engineering ETDs

The recently developed mechanistic-empirical pavement design guide (MEPDG, also known as Pavement M-E design method) uses the nationally calibrated, binder viscosity-based dynamic modulus predictive model for the design and analysis of asphalt pavements. In this study, this model is assessed for its appropriateness for asphalt-aggregate mixtures typically used in New Mexico. In essence, this study investigates the predictability issue of complex modulus of New Mexico mixes. A total of 54 Superpave mixes with different aggregate gradations, air voids, and binder grades were collected from the mixing plants and from the pavement construction sites. The loose asphalt mixtures were then compacted, …

Molecular Dynamics Modeling And Simulation Of Bitumen Chemical Aging, Farshad Fallah

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Chemical aging of asphalt binder leads to significant changes in its mechanical and rheological properties, resulting in poor pavement behavior and distress. Various laboratory methods have been used to simulate asphalt aging during the service life of the pavement. However, controversy exists regarding the capability of these methods to predict field aging, as various factors interact with the pavement during service and the mechanism behind aging is not fully understood. The two main outcomes of chemical aging are oxidation of asphalt molecules, and change in asphalt SARA (saturate, aromatic, resin, and asphaltene) fractions. Reaction of oxygen with asphalt components forms …

Tunable Nanocomposite Membranes For Water Remediation And Separations, Sebastián Hernández Sierra

Theses and Dissertations--Chemical and Materials Engineering

Nano-structured material fabrication using functionalized membranes with polyelectrolytes is a promising research field for water pollution, catalytic and mining applications. These responsive polymers react to external stimuli like temperature, pH, radiation, ionic strength or chemical composition. Such nanomaterials provide novel hybrid properties and can also be self-supported in addition to the membranes.

Polyelectrolytes (as hydrogels) have pH responsiveness. The hydrogel moieties gain or lose protons based on the pH, displaying swelling properties. These responsive materials can be exploited to synthesize metal nanoparticles in situ using their functional groups, or to immobilize other polyelectrolytes and biomolecules. Due to their properties, these …

Rubber Additives To Concrete Specimens, Kendall J. Sweitzer, Mary Mccannon

Williams Honors College, Honors Research Projects

Rubber, as an additive to concrete, would hypothetically cause a concrete specimen to take on some mechanical characteristics of the rubber to a certain degree. In particular, the concrete’s durability should increase when exposed to fluctuating temperature conditions due to the rubber additive. This experiment sets out to test crumb rubber as a concrete additive, cured under various atmospheric conditions. The effects shall be measured via a simple concrete compression test.

Unfortunately, several errors took place during experimental process that led to inconclusive results. However, it can be reasonably considered from testing Matrix One that the addition of crumb rubber …

Technical Developments In Fish Exclusion, Guidance, And Collection Materials, A. L. Peters

International Symposium on Hydraulic Structures

Construction of mills, dams and other structures in rivers and streams, and the withdrawal of water for irrigation or cooling industrial facilities vital to social and economic progress, have impacted the survival of marine life. Barriers and guidance or collection nets can protect fish and aquatic species while allowing water to flow unimpeded for commercial and industrial use. However, nets can attract aquatic growth, fill with debris, degrade with environmental stress, and be expensive to operate and maintain.

A closer look at the technical developments of materials and net designs in diverse settings can offer guidance that will be of …

Feasibility Study: The Evaluation Of Polymer Coatings To Prevent Weathering Of Weak Rocks, Lauren Distler

Senior Honors Projects, 2010-2019

The weathering and erosion of weak rocks along roadways can cause dangerous and potentially fatal rockfalls.   Various slope stabilization methods exist, but each presents a set of challenges and trade-offs.   The focus of the project is to understand the feasibility of utilizing of a polymerbased slope stabilization technique. Rock samples were collected along US Route 33 in Virginia and West Virginia, and preliminary tests were conducted to evaluate the absorption of water (% mass) and durability. The study evaluates three polymer options in regard to the following criteria: adhesion to rock, layer thickness, semi-permeability, insolubility, and non-toxicity. The polymer selection …

Development Of Cementitious Materials For Adhesion Type Applications Comprising Calcium Sulfoaluminate (Csa) Cement And Latex Polymer, Joshua V. Brien

Theses and Dissertations--Civil Engineering

The objective of this research was to develop high performing polymer modified calcium sulfoaluminate (CSA) cement materials for use in applications requiring superior adhesion characteristics. Little information is available describing interactions of CSA cement containing minor phase tri-calcium aluminate (C₃A) with commonly used admixtures. Given the scarcity of information, a basic approach for developing cementitious materials was followed. The basic approach consisted of four tasks: cement design, admixture design, polymer design and testing developed materials. The iterative, time consuming process is necessary for understanding the influence of specific constituent components on overall system behavior. Results from the cement …

Biaxial Bending And Lateral-Torsional Instability Of Imperfect Frp I-Beams Including Effects Of Retrofitting, Jodi Marie Knorowski

Civil & Environmental Engineering Theses & Dissertations

This thesis presents the outcome of a theoretical and experimental study of the behavior of Fiber Reinforced Polymer (FRP) I-beams susceptible to lateral-torsional instability or when subjected to biaxial bending. Laboratory experiments involved application of vertical and horizontal static loads to a 4 x 4 x ¼ in. I-beam with various lengths, and the resulting displacement, twist, and strain were recorded. In the vertical direction, the beam was loaded from different reference load heights with respect to the shear center of the beam. The governing biaxial flexure and torsion differential equations were modified to account for the presence of initial …

Investigating Wood Welding Parameters Using A Prototype Welding Machine, Timothy R. Melin

Master's Theses

Understanding how different processing variables influence wood welded bonds is vital if the technique will ever be used to create engineered lumber without using adhesives. A variation of vibration welding, wood welding uses pressure and friction to bond materials together. During welding, heat causes a softening in the wood, a naturally occurring composite material. This softening leads to fiber entanglement and a bond forms upon cooling.

The goal of this research was to investigate several processing aspects of the wood welding procedure. A prototype wood welding machine, designed and fabricated from the ground up, was used to investigate the effects …

Heating Methods And Detection Limits For Infrared Thermography Inspection Of Fiber-Reinforced Polymer Composites, Jeff R. Brown, H. R. Hamilton

Publications

The use of fiber-reinforced polymer (FRP) composites to strengthen existing civil infrastructure is expanding rapidly. Many FRP systems used to strengthen reinforced concrete are applied using a wet lay-up method in which dry fibers are saturated on site and then applied to the surface. This research investigated using infrared thermography (IRT) as a nondestructive evaluation (NDE) tool for detecting air voids and epoxy-filled holes in FRP systems bonded to a concrete substrate. Four small-scale specimens with FRP thicknesses ranging from 1 to 4 mm (0.04 to 0.16 in.) containing fabricated defects were constructed and inspected in a laboratory setting. Three …

Removing Fluoride From Drinking Water By Organic Polymers, Eleni Davou Achilleos

Civil & Environmental Engineering Theses & Dissertations

Fluoride is a substance that can provide beneficial or detrimental effects depending on the total amount ingested. Naturally occurring high fluoride concentrations exist in many drinking water supplies. The fluoride removal methods developed in the past have been found to be either impractical and/or not cost effective.

The purpose of this study was to determine whether organic polymers can effectively remove fluoride. The water used in this study contained naturally occurring fluoride concentrations between 4.5 to 5.5 mg/1 and it was collected from the City of Franklin, Virginia, water supply system. Laboratory jar test procedures, which simulated a conventional water …