Polymer and Organic Materials Commons^™

Adsorption Of Pfas On Bridged Functionalized Organosilica Materials, Elisha Lawerh Kabutey

Electronic Theses and Dissertations

PFAS are hazardous contaminants that have a devastating impact on human health and the environment. Their hazardous nature has led to the development of various adsorption methods for removing these contaminants from water sources. In this study, functionalized organosilica materials were synthesized from bis[3-(trimethoxysilyl)propyl] amine using the sol-gel method. The surface amino groups of the organosilica were converted into amine hydrochloride groups. Their adsorption properties were evaluated using salts of perfluorooctanoic acid, perfluorooctanesulfonic acid, and perfluorobutanesulfonic acid. Results showed excellent adsorption capacity of the materials. Adsorption of PFAS leads to particle agglomeration and flotation of the spent material. A column …

Fly Ash Proppant Developed For Hydraulic Fracturing, Raz Rzgar Haydar

Theses and Dissertations

Proppants are critical components in hydraulic fracturing, used to maintain fracture conductivity and enhance reservoir stimulation. In high-pressure and harsh reservoir environments, the use of high-strength proppants is essential to ensure well performance. Conventional proppants, being sand, ceramic, and sintered bauxite can be expensive, and their use often requires costly fracture fluids. This study investigates the possibility of utalizing fly ash geopolymers as a sustainable alternative that is also cost-effective for proppants manufacturing. Fly ash, a by-product from the combustion of coal and other materials, was explored as a base material for proppants, utilizing an alkaline solution as an activator …

Fire Fossils: Biomineral Infrastructures In Untangling Climates, Tanmayee More

Masters Theses

Diatoms drift, sediments sink, wildfires generate their own weather. Lightning strikes can blast sand into glass, and microscopic organisms do the same in the cold recesses of the ocean. What alchemies and metabolisms catalyze space, time, and energy? What are the thermodynamics of infrastructure in Climate Change?

Places, materials, and beings are afterimages. Through alchemical experiments, and multi-scalar imaging, I develop simulations of wildfires, and their profound, reverberating effects. In this thesis, a glass-meets-landscape experimental process enters these obscured conditions and renders new material relations for the built environment.

Incorporating Recycled And Repurposed Plastic Into 100% Reclaimed Asphalt Pavement, Basant Bhatt

Graduate Theses and Dissertations (2019 - present)

The increasing awareness of sustainability in the asphalt industry has driven the use of recycled materials like reclaimed asphalt pavement (RAP) and waste plastic. This study examines the incorporation of recycled polypropylene (rPP), recycled high-density polyethylene (rHDPE), and recycled low-density polyethylene (rLDPE) at 0.3%, 0.6%, and 0.8% dosages into 100% RAP, along with the warm mix asphalt additive Evotherm® P25. Laboratory tests were conducted to evaluate the mechanical and durability performance of the modified asphalt mixtures while rutting and fatigue life were evaluated using mechanistic-empirical (ME) analysis in PerRoad software. Both plastic type and dosage had a statistically significant impact …

Innovative Design Methodology For Durable Open-Graded Friction Course Asphalt Mixtures, Anas Abualia

LSU Doctoral Dissertations

Open-graded friction course (OGFC) is a thin asphalt mixture surface layer with a high percentage of coarse aggregates and high interconnected air voids, which provides improved skid resistance, visibility, and decreased pavement-tire noise. However, construction personnel at DOTD reported that conventional OGFC mixtures have short service life (raveling distress). Further, their structural contribution to the pavement structure is commonly neglected and designed only for functionality purposes.

The objective of this study was to develop a rational mix design methodology to improve the durability of OGFC asphalt mixtures. Specific objectives are to: (1) conduct a rheological and chemical characterization of polymer-, …

Reuse Of Calcium Carbonate (Caco3) Recovered From Discarded Carpets As Filler In Fiber-Reinforced Polymer (Frp) Composites, Roshan Devkota

Graduate Theses, Dissertations, and Problem Reports (ETD)

Over four billion pounds of carpet are discarded annually in the United States, making carpet waste a significant environmental concern. Calcium carbonate (CaCo₃) constitutes up to 45% of the mass of most synthetic carpets. Reusing this CaCo₃ as a filler in the rapidly growing fiber-reinforced polymer (FRP) industry, which is projected to reach USD 10.38 billion, presents a low-cost, practical approach to developing a market-based solution to post-consumer carpet waste.

This study investigates the reuse of CaCo₃ recovered from discarded carpet backing as a filler in FRP composites, focusing on its mechanical viability in comparison to virgin CaCo₃. The methodology …

Development Of Multifunctional Wood Composites With Integrated Phase Change Materials For Enhanced Thermal Management, Self-Healing, And Sustainability., Emmanuel Igbokwe

LSU Master's Theses

Abstract

This study focused on incorporating self-healing, flame retardancy, and energy harvesting capabilities into the wood composite to contribute to more sustainable and energy-efficient building practices. Oriented strand board has been widely used as sheath for roofing or dry walls in residential buildings. Residential buildings account for a large portion of energy consumption. Therefore, an oriented strand board with energy harvesting capability is highly desired. Additionally, flame retardancy and damage self-healing and end-of-life recycling are also critical features for buildings.

In this study, we prepared a novel oriented strand board by constructing sandwich structures. The face sheets of the sandwich …

Investigation Of Temperature, Solution Strength, And Applied Stress Effects On Cation Exchange Processes In Different Geosynthetic Clay Liner Products, Kendra Fuller

Master's Theses

An extensive laboratory test program was conducted to analyze and compare the cation exchange processes in three different varieties of sodium bentonite (Na-B) geosynthetic clay liners (GCLs) over increased conditioning durations up to 32 days and investigate the effects of temperature, solution strength, and applied stress. The goal of this test program was to establish whether the variables of temperature, solution strength, and applied stress improved or degraded the engineering properties of GCLs in laboratory testing and municipal solid waste (MSW) landfill applications. The GCLs were conditioned in liquids of increasing ionic strength, using deionized water and 2, 50, and …

Performance Evaluation Of Asphalt Binder Modified With Recycled Plastics, Abeeb G. Oyelere

Graduate Theses and Dissertations (2019 - present)

The surge in the production of plastic waste has become a pressing global environmental issue. To address this, repurposing plastic waste to modify asphalt binders in asphalt pavement is being explored This study investigates the potential of recycled high-density polyethylene (rHDPE) and recycled polypropylene (rPP) as asphalt binder modifies to improve pavement performance and sustainability while mitigating plastic waste's adverse environmental impacts. Laboratory investigations were conducted to assess the rheological performances as well as the compatibility of rHDPE and rPP-modified asphalt. Additionally, the impact of aging and mixing temperature on rheological performance was investigated. Experimental results indicated that adding these …

Assessing Adoption Barriers Of Sustainable Packaging In Egypt, Carol Ramses Morgan

Theses and Dissertations

Sustainable packaging has become an essential part of business decisions and corporate directions. With the rise of environmental damages due to improper waste management and unsustainable practices, businesses have a major responsibility to analyze their products’ life cycles and redesign them with sustainability in mind. Applying sustainable packaging could save companies large amounts of resources, therefore cutting costs, while also achieving the legal and social duty as a corporation towards society and the environment. Many developing countries, with specific focus on Egypt, have recently focused on legislative and corporate decisions in order to encourage more sustainable practices. Egypt’s new Waste …

Effect Of Admixtures On Rapid Hardening, Self-Consolidating Concrete, Haley Johnson

Theses and Dissertations--Civil Engineering

Self-consolidating, rapid-hardening concrete is a sought-after product in the market now, however the effects of admixtures on fresh and hardened concrete rheology are still uncertain. This study aims to create a self-consolidating concrete (SCC) using calcium sulfoaluminate (CSA) cement for its rapid-hardening properties, and tests two set time retarders and two viscosity-modifying admixtures (VMAs) to determine how they affect the properties of concrete. The properties studied in this thesis are workability, viscosity, set times, air content, compressive strength, and freeze-thaw resistance of self-consolidating concrete. It was found that tartaric acid creates a very workable SCC with consistent results regardless of …

Sustainable Materials For Environment − Multifunctional Material Made From Dead Leaves And Nanostructured Materials For Antibiotic Degradation, Siyuan Fang

Dissertations, Master's Theses and Master's Reports

As environmental pollution from industrial processes and human activities continues to rise, finding efficient approaches to recycle waste materials and degrade persistent contaminants becomes increasingly critical. Dead leaves, an abundant but underutilized biomass, present an opportunity for creating value-added materials if their biocomponents can be preserved and transformed. Simultaneously, antibiotics such as tetracycline are widely found in water bodies but pose serious ecological and health risks, necessitating effective degradation methods. This dissertation addresses these challenges by leveraging natural and nanostructured materials to develop multifunctional products and advanced photocatalytic processes.

Chapter 3 of this dissertation addresses the challenge of converting waste …

Novel Membrane Materials For Nutrient Recovery From Nutrient-Rich Resources, Km Prottoy Shariar Piash

Graduate Theses, Dissertations, and Problem Reports (ETD)

Global demand for fertilizer production is expanding substantially to meet the food demand of an increasing world population. Anaerobic digestate (AD) of various centralized wastewater facilities contains substantial amounts of ammonium (NH₄⁺) (300-800 mg/L), potassium (K⁺) (13-120 mg/L), and phosphorus (P) (30-100 mg/L)- based nutrients. In addition to reducing energy costs and CO₂ emissions compared to conventional fertilizing raw material manufacturing, recovering nutrients from these waste streams could help mitigate problems such as eutrophication, which otherwise incurs billions of dollars losses to US economy annually. Apart from nutrients, wastewater streams also contain organic pollutants …

Modeling Of Asphalt Concrete For Cross-Anisotropic Visco-Elasticity And Heterogeneity, Zafrul Hakim Khan

Civil Engineering ETDs

Asphalt Concrete (AC) is a cross-anisotropic viscoelastic material. This study has developed a methodology to backcalculate the cross-anisotropic properties of the AC layer from the Falling Weight Deflectometer (FWD) sensor and pavement response data from embedded sensors inside a pavement section. This study has also developed a two-way coupled Multiscale Finite Element Model (MsFEM) with Phase Field Fracture (PFF) to study the microstructural heterogeneity and damage of the AC layer based on the actual field loadings. A Finite Difference Time Domain (FDTD) and Machine learning-based backcalculation algorithm were developed to determine the layer thickness and dielectric constant from air-coupled Ground …

Utilization Of Cellulose Symbiotic Culture Of Bacteria And Yeast (Scoby) With Sweet Tea Media As Methylene Blue And Brilliant Green Biosorbent Material, Leonard Mateus Sigiro, Ahmad Maksum, Donanta Dhaneswara

Journal of Materials Exploration and Findings

The cellulose from Symbiotic Culture of Bacteria and Yeast (SCOBY) can be used as a biosorbent for dye adsorption, such as Methylene Blue and Brilliant Green. This study used sweet tea with a 6% of sugar concentration and 14 days of fermentation time to synthesize biosorbent material from SCOBY. The results from this synthesis are then characterized using FTIR, SEM, and BET. From the result of characterization, it was found that SCOBY has pores formed from cellulose. The results of the average pore size are 1.5976nm with a pore volume of 0.229cc/g, while the specific surface area is 143.244m2/g. The …

Higher-Order Effects In Biaxial Flexure Of Gfrp I-Section Beams, Zia Razzaq, Faridoon Z. Razzaq

Civil & Environmental Engineering Faculty Publications

A theoretical study of Glass Fiber Reinforced Polymer (GFRP) beams subjected to biaxial bending moments is presented with a focus on the influence of higher-order effects on maximum normal stresses. It is shown that the biaxial bending type of loading causes a dramatic increase in the maximum normal stress for a GFRP beam when induced torsional effects are included. The study demonstrates that the traditional first-order theory can grossly underestimate the maximum normal stress in a GFRP beam. Based on the numerical results presented using a higher-order theory which also accounts for induced warping normal stresses, the maximum normal stress …

Development Of Polymeric Sorbents As Reusable Filtration Systems For Remediation Of Pfas Contaminated Water, E. Molly Frazar

Theses and Dissertations--Chemical and Materials Engineering

Decades of use of per- and polyfluoroalkyl substances (PFAS) in a multitude of consumer and industry-based products have led to a devastating amount of soil and water contamination. Although these chemicals and compounds possess advantageous qualities – such as that of PFAS in the role of fire-fighting foams that have no doubt saved countless lives and homes, we must take responsibility for the anthropogenic hazards that threaten our global health. This entails being able to cost-effectively remediate problems created in the past from overuse of toxic substances that could negatively impact our future, and in this case, the future of …

Elastoplastic Quasi-Static And Impact Load Response Of Steel Structure Sub-Assemblage With Cfrp Strips, Ali Al Aloosi, Zia Razzaq

Civil & Environmental Engineering Faculty Publications

Presented in this paper is the outcome of an experimental investigation of the elastoplastic quasi-static and impact load response of a steel sub-assemblage constructed using a pair of hollow square section members with or without Carbon Fiber Reinforced Polymer (CFRP) strips. The sub-assemblage consists of a long structural member welded to a short member, thus representing a typical combination of a column and a beam on the face of a multi-story steel building frame. The column is subjected to a lateral quasi-static or impact load. Tests are conducted on four separate steel sub-assemblages. The first two tests are conducted with …

Fabrication Of Thin-Film Composite, Reverse-Osmosis Membranes With Polyethylenimine Modifications For Enhancing Membrane Fouling Resistance, Stephanie N. Hamilton

Master's Theses

Increasing water reuse opportunities for communities has become increasingly important as access to clean water is becoming more scarce. Reverse Osmosis (RO) is an advanced treatment technology used in water recycling wastewater for potable reuse applications. RO is a promising technology; however, the membranes have limitations including their high energy demand and their susceptibility to membrane fouling. The main objective of this study was to develop a reproducible method for the fabrication of RO membranes with enhanced flux and reduced susceptibility to fouling. Literature contains numerous publications on fabrication of thin film composite (TFC) RO membranes with high performance. However, …

Lateral-Torsional Instability And Biaxial Bending Of Imperfect Frp I-Beams, Jodi Knorowski, Stella B. Bondi, Zia Razzaq

Civil & Environmental Engineering Faculty Publications

This paper presents the outcome of a theoretical and experimental study of the behavior of Fiber Reinforced Polymer (FRP) I-beams exposed to lateral-torsional instability or when subjected to biaxial bending. Laboratory experiments involved the application of vertical and horizontal static loads to a 4 x 4 x ¼ in. I-beam with various lengths and the resulting deflections were recorded. Governing biaxial flexure and torsion differential equations were modified to account for the presence of initial imperfections and subsequently solved using a central finite-difference scheme. The theoretical predictions of the beam behavior were found to be in good agreement with what …

Chitosan Graphene Composite Fabrication And Characterization For Treatment Of Harmful Algal Blooms And Toxins, Sarah Zetterholm

Master's Theses

Chitosan graphene composites were fabricated and characterized as a management strategy for harmful algal blooms (HABs) caused by various species of cyanobacteria. These chitosan graphene materials were compared to previously studied chitosan graphene-oxide composites in both material properties and HAB treatment. In previous studies, adsorption of the cyanobacteria onto the surface of the composite materials has been observed. Investigations of the pure materials for these composites are also included in this study to determine whether removal is a result of charge interactions with the composite, or as an inherent property of the graphene or graphene oxide. Initial results suggest that …

Experimental Investigation Of The Performance Of A Hybrid Self-Healing System In Porous Asphalt Under Fatigue Loadings, Shi Xu, Liu Xueyan, Amir Tabakovic, Erik Schlangen

Articles

Self-healing asphalt, which is designed to achieve autonomic damage repair in asphalt pavement, offers a great life-extension prospect and therefore not only reduces pavement maintenance costs but also saves energy and reduces CO2 emissions. The combined asphalt self-healing system, incorporating both encapsulated rejuvenator and induction heating, can heal cracks with melted binder and aged binder rejuvenation, and the synergistic effect of the two technologies shows significant advantages in healing efficiency over the single self-healing method. This study explores the fatigue life extension prospect of the combined healing system in porous asphalt. To this aim, porous asphalt (PA) test specimens with …

Strengthening Of Corroded Steel Structures Using Cfrp – An Experimental Review, Ghada El-Mahdy Ph.D., P.Eng, Abdallah H. Yassin, Abdel El Rahman Khaled

Civil Engineering

Fibre reinforced polymers (FRP) have been widely used to strengthen reinforced concrete structures, however, nowadays their use to strengthen steel structures is under investigation. In particular, the need to strengthen corroded steel structures found in aggressive environments, such as marine environments, which have undergone a reduction in cross-sectional area and hence a reduction in their load-carrying capacity is in need of studying. The main problems that arise when using carbon fibre reinforced polymer (CFRP) sheets to strengthen steel structures is the weakness in the interfacial bond between the CFRP and the steel surface, the thinness of CFRP sheet, and the …

Effect Of Incorporating Pottery And Bottom Ash As Partial Replacement Of Cement, Bassam A. Tayeh, Doha M. Alsaffar, Lawend K. Askar, Asmahan Issa Jubeh

Karbala International Journal of Modern Science

This study addressed the environmental constraints in cement produc­tion. Ordinary Portland cement (OPC) was replaced with pottery powder (PP, produced by grinding locally available pottery) and bottom ash (BA) at 10%, 20% and 30% of cement mass. Moreover, 4% calcium chloride solution (CaCl₂.2H₂O) was used as mixing water. Material properties, such as standard consistency, setting time and compressive strength, were measured with different percentages of OPC replacement with PP and BA. Results indicated that the replacement with PP and BA increased the water demand to achieve the standard consistency. These results revealed that the strength evolution …

Biopolymer-Stabilized Earth Materials For Resilient And Adaptable Infrastructures, Sherif Abdelaziz, Dilip Gersappe, Dilip Rafailovich

Department of Civil Engineering Faculty Publications

Earth dams and levees are constructed and retrofitted nowadays using the same materials that were used in the past, clays and sands. Despite the current advances in engineering, designing and constructing these critical infrastructure, earthen dams and levees continue to suffer from the same challenges over the years. These challenges include internal and surface erosions, loss of stability due to moisture migration, and inabilities to self-heal potential failure points. This project focuses on the use of biopolymers as additives to strengthen earthen dams and levees targeting an overall increase in their resilience.

Explicitly, the report for Milestone 3 presented the …

Application Of Computational Tools To Spaghetti-Based Truss Bridge Design, Jin Xu, Jiliang Li, Nuri Zeytinoglu, Jinyuan Zhai

ASEE IL-IN Section Conference

Application of Computational Tools to Spaghetti-Based Truss Design

Statics and Strength of Materials are two foundational courses for Mechanical/Civil Engineering. In order to assist students in better understanding and applying concepts to a meaningful design task, SolidWorks and theoretical calculation were used for a spaghetti-bridge design contest with the constraints of given maximum weight and allowable support-material weight. As the first step of this iterative designing process, both extrude feature and structural member were introduced to model planar bridge trusses. Then SolidWorks’ Statics module was used to run FEA analysis of the structural performance in efforts to optimize the …

A Study Of The Effect Of Heat Treatment On 3d Printed Pla Impact Strength, Suresh Thota

Electronic Theses and Dissertations

Environmental conditions have a significant effect on the mechanical properties of various materials. Environmental parameters such as temperature and humidity have a major impact on mechanical properties of materials such as compressive strength, tensile strength, bending strength and impact strength. The purpose of this research is to study how temperature and humidity affect the impact strength of 3D printed PLA plastic. Impact strength is the ability of a material to absorb energy subjected to an impact load by a pendulum. In this research, 3D printing was employed to produce PLA specimens which were later used for different experimental testings. For …

Improving Ductility Of Slender Reinforced Concrete Shear Walls With Frp Sheets And Splay Anchors, Luke M. Ostrom

Architectural Engineering

The Sylmar earthquake of 1971 caused significant damage to slender, non-ductile reinforced concrete (RC) shear wall buildings in California. A later survey by the Concrete Coalition in 2011, under the guidance of EERI members, indicated that there are over 3000 vulnerable concrete buildings in California [8]. This led to City of Los Angeles (LA) Ordinance 193893 enacted in 2015, which requires mandatory upgrades to these concrete buildings by 2035. Current practice to meet the requirements of this ordinance, with respect to RC wall buildings, involves adding new shear walls to the building plan or increasing the cross-sectional area of existing …

Cementitious Sensors Exhibiting Stopbands In Acoustic Transmission Spectra, Shreya Vemuganti

Shared Knowledge Conference

Ultrasonic monitoring in cementitious materials is challenging due to the high degree of attenuation. In wellbore environments, monitoring becomes more challenging due to inaccessibility. Meta materials, also known as acoustic bandgap materials, exhibit an interesting feature of forbidding the propagation of elastic/sound waves and isolate vibration in a certain frequency band. Traditionally, acoustic bandgap materials are developed with inclusions such as tin, aluminum, gold, steel in a polymer matrix. In this study, we present the development of three-dimensional cementitious sensors capable of exhibiting stopbands in the acoustic transmission spectra using carbon nanotubes. Relatively wide stopbands were engineered using Floquet-Bloch periodic …

Microstructural Characterization Of Shear Transformation Zones And Modeling Indentation Size Effect In Amorphous Polymers, Leila Malekmotiei

LSU Doctoral Dissertations

The first aim of this work is developing a procedure for experimental and analytical characterization of nano-scale microstructures which mediate large scale deformation in amorphous polymers. Glassy polymers are extensively used as high impact resistant, low density, and clear materials in industries. Nevertheless, their response under severe loading conditions is yet to be appropriately unraveled. Due to the lack of long-range order in the microstructures of glassy solids, their plastic deformation is different from that in crystalline solids. Shear Transformation Zones (STZs) are believed to be the main plasticity carriers in amorphous solids and defined as the localized atomic or …