Materials Science and Engineering Commons^™

Recent Progresses In Molybdenum-Based Electrocatalysts For The Hydrogen Evolution Reaction, Ze-Xing Wu, Jie Wang, Jun-Po Guo, Jing Zhu, De-Li Wang

Journal of Electrochemistry

Electrochemical catalytic production of hydrogen has been considered as a promising and sustainable strategy for clean and renewable energy technologies. Molybdenum-based non noble metal catalysts for the hydrogen evolution reaction have attracted extensive attention due to its effective catalytic performance. In this review, the recent progresses in molybdenum-carbide, phosphide, nitride and sulfide electrocatalysts are presented. In addition, the strategies to improve the catalytic performance are analyzed and the prospects for the future development trends are expected.

Engineering Gold Nanoparticles And Their Use To Control Nucleation, Pedram Jahanian

Wayne State University Dissertations

This study focuses on fabrication of hybrid nanostructures using gold nanoparticles (AuNP) as seeds and partially oxidized potassium tetracyanoplatinate, known as Krogmann’s salt (KCP), and later this method will be employed to manufacture a prototype sensor for detecting different vapors. Nanocrystals are synthesized using electrochemical method with the aim to have more control over the size and shape of the charge transfer salt based on the seed mediated nucleation method. AuNP seeds are prepared on highly ordered pyrolytic graphite (HOPG) substrate by the electrocrystallization method. An aqueous solution of 0.05 to 1 mM Hydrogen tetrachloroaurate (HAuCl4) with 0.1 mM (Potassium …

Investigating The Size Dependent Material Properties Of Nanoceria, Bushra B. Alam

Legacy Theses & Dissertations (2009 - 2024)

Nanoceria is widely being investigated for applications as support materials for fuel cell catalysts, free radical scavengers, and as chemical and mechanical abrasives due to its high antioxidant capacity and its oxygen buffering capacity. This antioxidant or oxygen buffering capacity has been reported to be highly size dependent and related to its redox properties. However, the quantification of this antioxidant capacity has not been well defined or understood and has been often been carried out using colorimetric assays which do not directly correlate to ceria nanoparticle properties. Fabrication rules for developing materials with optimal antioxidant/oxygen buffering capacities are not yet …

Bioactive Poly(Beta-Amino Ester) Biomaterials For Treatment Of Infection And Oxidative Stress, Andrew L. Lakes

Theses and Dissertations--Chemical and Materials Engineering

Polymers have deep roots as drug delivery tools, and are widely used in clinical to private settings. Currently, however, numerous traditional therapies exist which may be improved through use of polymeric biomaterials. Through our work with infectious and oxidative stress disease prevention and treatment, we aimed to develop application driven, enhanced therapies utilizing new classes of polymers synthesized in-house. Applying biodegradable poly(β-amino ester) (PBAE) polymers, covalent-addition of bioactive substrates to these PBAEs avoided certain pitfalls of free-loaded and non-degradable drug delivery systems. Further, through variation of polymer ingredients and conditions, we were able to tune degradation rates, release profiles, cellular …

In Vacuo Fabrication And Electronic Structure Characterization Of Atomic Layer Deposition Thin Films, Michael Schaefer

USF Tampa Graduate Theses and Dissertations

Improvement of novel electronic devices is possible by tailor-designing the electronic structure at device interfaces. Common problems observed at interfaces are related to unwanted band alignment caused by the chemical diversity of interface partners, influencing device performance negatively. One way to address this problem is by introducing ultra-thin interfacial dipole layers, steering the band alignment in a desired direction. The requirements are strict in terms of thickness, conformity and low density of defects, making sophisticated deposition techniques necessary. Atomic layer deposition (ALD) with its Ångstrom-precise thickness control can fulfill those requirements.

The work presented here encompasses the implementation of an …

Size-Dependent Mechanical Properties Of Crystalline Nanoparticles, Dan | Mordehai

Nanomechanical Testing in Materials Research and Development V

Defect-free crystalline nanostructures reach strengths which are close to their ultimate shear strength, since their deformation is controlled by dislocation nucleation from the surfaces. In this talk we examine how the size and shape of defect-free nanoparticles affect their mechanical properties. In the first part we discuss the indentation response. Earlier experiments on Au nanoparticles showed that they become easier to indent as they are smaller [1]. With large scale Molecular Dynamics Simulations, we show how the lateral dimensions give rise to size effect in indentation through the competition between dislocation storage and depletion on free surfaces. The latter mechanism …

On Thermal Aging Prevention In Polymer Core Composite Conductor Rods, Joe D. Hoffman

Electronic Theses and Dissertations

Increased energy usage in the United States and worldwide is driving the demand for new technologies to transmit electrical power in greater quantities and with reliable, safe, and more efficient methods. One recent innovation is to replace the standard Aluminum Conductor Steel Reinforced electrical transmission conductor with a new conductor design that utilizes a fiber reinforced polymer core rod to support a fully annealed aluminum conductor. This new technology that includes a hybrid carbon fiber/epoxy and glass fiber/epoxy support core allows for better efficiency and for greater current to be transmitted in the same size and weight line. These new …

Investigation Of Lanthanide-Doped Anatase Tio2 Core-Shell Nanoparticles For Photocatalysis And Gas Sensing, Rezwanur Rahman

Graduate Theses/Dissertations

Anatase TiO2 has been shown to be potential applications for photo-remediation of chemical waste as well as for photocatalytic splitting of water. The catalytic properties of TiO2 materials can be modified by doping with lanthanide (Ln) ions. In order to minimize the distortion and/or change of the structure of TiO2 nanoparticles, surface doping of anatase TiO2 nanoparticles (~ 14 nm) with several Ln ions (Nd3+, Gd3+, Eu3+, Yb3+) has been successfully made. X-ray diffraction (XRD) and Raman characterization shows that the anatase phase of treated nanoparticles is well preserved. Scanning electron microscopy (SEM) shows that the majority of the nanoparticles …

Developent Of A Phospholipid Encapsulation Process For Quantum Dots To Be Used In Biologic Applications, Logan Grimes

Master's Theses

The American Cancer Society predicts that 1,665,540 people will be diagnosed with cancer, and 585,720 people will die from cancer in 2014. One of the most common types of cancer in the United States is skin cancer. Melanoma alone is predicted to account for 10,000 of the cancer related deaths in 2014. As a highly mobile and aggressive form of cancer, melanoma is difficult to fight once it has metastasized through the body. Early detection in such varieties of cancer is critical in improving survival rates in afflicted patients. Present methods of detection rely on visual examination of suspicious regions …

A Novel Silica-Based Nano Pigment As A Titanium Dioxide Replacement, Ryan Stoneburner

Masters Theses

This research focused on the evaluation of a new Silica-based pigment for the replacement of titanium dioxide (TiO₂) in paperboard coatings. The silica-based pigment has shown the ability to be a replacement in terms of functionality and runnability. TiO₂ is currently the highest opacifying pigment used in paper coatings, but it is also the most costly. Finding a less expensive pigment that doesn't reduce effectiveness is critical to reducing the cost of TiO₂ formulations. To evaluate the new pigment, coatings will be applied using a Cylindrical Laboratory Coater (CLC) with varying amounts of TiO₂ and …

Pulse Electrodeposition Of Pd-Ni Alloy Nanoparticles For Electrocatalytic Oxidation Of Formic Acid, Fang-Zu Yang, Jun-Pei Yue, Zhong-Qun Tian, Shao-Min Zhou

Journal of Electrochemistry

The Pd-Ni alloy nanoparticles with nickel atomic contents of 12.0%, 16.4% and 22.6% were successfully electrodeposited from a Pd-Ni alloy electrolyte by square wave pulse plating. The alloy nanoparticles were in the spherical shape with a diameter of 50 ~ 80 nm. As the growth potential of the alloy was negatively shifted, the nickel content of the alloy was increased, and the size of the nanoparticles was almost the same, whereas the number, the degree of crosslinking and the real active area of the nanoparticles were increased. As the nickel content of the alloy nanoparticles increased, the peak current for …

Controllable Synthesis Of Dispersed Spherical Fe3O4 Nanoparticles As Lithium-Inserted Materials, Hong-Li Zou, Wei-Shan Li

Journal of Electrochemistry

Dispersed spherical Fe₃O₄ nanoparticles were synthesized by a hydrothermal method. The influences of odecyl trimethyl ammonium bromide (DTAB) concentration on the morphology and particle size of the as-prepared Fe₃O₄ were studied. Electrochemical performance of the as-prepared sample as anode materials of lithium ion battery was investigated. It is found that the as-prepared sample exhibits superior rate performance and cycle performance. The nano-sized materials provide structural stability and favor the transfer of lithium ions.

Nd–Fe–B Nanoparticles Through Surfactant Assisted Mechanical Milling And Alloy Design, Jordann M. Bornhoft

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

Surfactant-assisted mechanical milling has been used to produce discrete nanoparticles of both Nd-Fe-B and Sm-Co amenable for bottom-up production of nanostructured or nanocomposite permanent magnets. However, in Nd-Fe-B the comminution of the material proceeds by transgranular fracture, which influences both the morphology of the nanoparticles and the magnetic properties. This paper utilizes alloy design to alter the fracture behavior from transgranular fracture to intergranular fracture. Nd-rich Nd₂Fe₁₄B alloys were produced by melt spinning in an overquenched state. The melt spun ribbons were annealed at 700°C and 800°C to ensure complete crystallization and to form different grain …

Binding, Transcytosis And Biodistribution Of Anti-Pecam-1 Iron Oxide Nanoparticles For Brain-Targeted Delivery, Mo Dan, David B. Cochran, Robert A. Yokel, Thomas D. Dziubla

Pharmaceutical Sciences Faculty Publications

OBJECTIVE: Characterize the flux of platelet-endothelial cell adhesion molecule (PECAM-1) antibody-coated superparamagnetic iron oxide nanoparticles (IONPs) across the blood-brain barrier (BBB) and its biodistribution in vitro and in vivo.

METHODS: Anti-PECAM-1 IONPs and IgG IONPs were prepared and characterized in house. The binding affinity of these nanoparticles was investigated using human cortical microvascular endothelial cells (hCMEC/D3). Flux assays were performed using a hCMEC/D3 BBB model. To test their immunospecificity index and biodistribution, nanoparticles were given to Sprague Dawley rats by intra-carotid infusion. The capillary depletion method was used to elucidate their distribution between the BBB and brain parenchyma.

RESULTS: Anti-PECAM-1 …

Magnetic Interaction Reversal In Watermelon Nanostructured Cr-Doped Fe Nanoclusters, Maninder Kaur, Qilin Dai, Mark Bowden, Mark H. Engelhard, Yaqiao Wu, Jinke Tang, You Qiang

Materials Science and Engineering Faculty Publications and Presentations

Cr-doped core-shell Fe/Fe-oxide nanoclusters (NCs) were synthesized at varied atomic percentages of Cr from 0 at. % to 8 at. %. The low concentrations of Cr (%) were selected in order to inhibit the complete conversion of the Fe-oxide shell to Cr₂O₃ and the Fe core to FeCr alloy. The magnetic interaction in Fe/Fe-oxide NCs (~25 nm) can be controlled by antiferromagnetic Cr-dopant. We report the origin of σ-FeCr phase at very low Cr concentration (2 at. %) unlike in previous studies, and the interaction reversal from dipolar to exchange interaction in watermelon-like Cr-doped core-shell NCs.

Pulsed Laser Coating Of Bioceramic (Hap) And Niti Nanoparticles On Metallic Implants, Aayush Goswami, Gary J. Cheng

The Summer Undergraduate Research Fellowship (SURF) Symposium

This research deals with increasing the biocompatibility of the bio implants which have a global market valued more than $94.1 billion . The surface of the metal alloys used for the bone implants need to be coated with bio compatible materials like HAp(Hydroxyapatite), graphene, etc. in order to promote the growth of cells(osteoblasts) on the surface of the implants. Various techniques like plasma spray coating, ion beam sputter coating, etc. have been used before to coat such materials on a substrate, however these have faced problems of coating quality. In order to perfect this coating, that is make it more …

Electrochemical Sensing With Metal Oxides, Isabella Ramirez, Lia Stanciu, Alexandra Snyder

The Summer Undergraduate Research Fellowship (SURF) Symposium

The effective sensing of hydrogen peroxide is important for a variety of reasons. It can be utilized as a diagnostic tool for diseases like asthma; also, the sensing can be utilized in pharmaceutical and food production for quality control. The use of silver oxide nanoparticles with varying morphologies has not been investigated as a sensing agent for hydrogen peroxide in the past. The particles’ properties and ability to oxidize and reduce hydrogen peroxide suggest that they will be effective to create a sensitive sensor. The silver oxide particles were prepared through chemical reduction using varying molar ratios of reactants. The …

Design And Fundamental Understanding Of Minimum Quantity Lubrication (Mql) Assisted Grinding Using Advanced Nanolubricants, Parash Kalita

Graduate Theses and Dissertations

Abrasive grinding is widely used across manufacturing industry for finishing parts and components requiring smooth superficial textures and precise dimensional tolerances and accuracy. Unlike any other machining operations, the complex thermo-mechanical processes during grinding produce excessive friction-induced energy consumption, heat, and intense contact seizures. Lubrication and cooling from grinding fluids is crucial in minimizing the deleterious effects of friction and heat to maximize the output part quality and process efficiency. The conventional flood grinding approach of an uneconomical application of large quantities of chemically active fluids has been found ineffective to provide sufficient lubrication and produces waste streams and pollutants …

Dielectric Properties Of Polymer–Particle Nanocomposites Influenced By Electronic Nature Of Filler Surfaces, Sasidhar Siddabattuni, Thomas P. Schuman, Fatih Dogan

Materials Science and Engineering Faculty Research & Creative Works

The interface between the polymer and the particle has a critical role in altering the properties of a composite dielectric. Polymer-ceramic nanocomposites are promising dielectric materials for many electronic and power devices, combining the high dielectric constant of ceramic particles with the high dielectric breakdown strength of a polymer. Self-assembled monolayers of electron rich or electron poor organophosphate coupling groups were applied to affect the filler–polymer interface and investigate the role of this interface on composite behavior. The interface has potential to influence dielectric properties, in particular the leakage and breakdown resistance. The composite films synthesized from the modified filler …

The Effect Of Nanostructure On The Electrical Properties Of Metal Oxide Materials, Philip Zachary Rice

Legacy Theses & Dissertations (2009 - 2024)

Resistive random access memory (ReRAM) is a potential replacement technology for Flash and other memory implementations. Advantages of ReRAM include increased scalability, low power operation, and compatibility with silicon semiconductor manufacturing. Most of the ReRAM devices described to date have utilized thin film based metal oxide dielectrics as a resistive switching matrix. The goal of this dissertation project has been to investigate the resistive switching behavior of nanoparticulate metal oxides and to develop methods to utilize these materials in ReRAM device fabrication. To this end, nanoparticles of TiO₂ and HfO₂ were synthesized under a variety of conditions resulting …

Multidentate Resorcinarene Surfactants For The Phase Transfer Of Metal Nanoparticles And Nanodiamonds: Applications In Catalysis And Diamond Film Growth, Vara Prasad Sheela

Chemistry & Biochemistry Theses & Dissertations

One main objective of the present work is to functionalize cuboctahedral platinum nanoparticles with various multidentate resorcinarene surfactants and study their influence in determining their catalytic activity. We hypothesized that catalytically active and recyclable catalysts can be achieved by incomplete yet strong passivation of the nanoparticle surfaces by using multidentate resorcinarene surfactants. We have developed phase transfer protocols for functionalizing cuboctahedral platinum nanoparticles with resorcinarene thiol or amine. Fluorescence assay confirmed that both these nanoparticles contained almost comparable unpassivated metal area. The activity of such phase transferred nanoparticles was tested in the catalytic hydrogenation of allyl alcohol. The conversion of …

The Synthesis And Characterization Of Gold And Silver Nanoparticles In Formal And Informal Settings, Mathew Wynn

Materials Engineering

Silver nanoparticles were synthesized through the reduction of AgNO3 using NaBH4. The borohydride anions were adsorbed onto silver nanoparticles. The repelling forces of the borohydride anions prevented the aggregation of particles, but the addition of an electrolyte or agitation induced aggregation. A yellow hue was given off by the silver nanoparticle sol that, using a spectrophotometer, had plasmon resonance at 386 nm. The silver nanoparticles were estimated to be 10 to 20 nm in diameter. Gold nanoparticles were synthesized through the reduction of HAuCl4 using Na3C6H5O7. The gold nanoparticle sol gave off a red hue that had plasmon resonance at …

The Effects Of Concentration, Stir Rate, And Processing Temperature On The Iridescence Of Polymethyl Methacrylate Nanoparticles, David Baruela

Materials Engineering

Synthetic opals were synthesized by creating polymethyl methacrylate (PMMA) nanospheres in order to determine which conditions would create the best iridescent samples. The factors affecting the iridescence were nanosphere concentration, stir rate, and processing temperature. PMMA solutions were made by adding 17 mg of granular azobis to a solution of 16 mL of distilled water with 3 mL of methyl methacrylate (MMA). The solution was stirred at different rates, slow and fast, and different temperatures, 70 °C and 90 °C, under a constant flow of nitrogen gas for 40 minutes until the polymerization reaction was complete. Glass substrates were prepared …

Structural Dna Origami: Engineering Supermolecular Self-Assembly For Nanodevice Fabrication, Craig Marshal Onodera

Boise State University Theses and Dissertations

Two challenges encountered in nanotechnology are the ability to create nanostructures inexpensively and the ability to arrange nanomaterials with a precision commensurate with their size. In nature, nanostructures are created using a bottom-up approach, whereby molecules hierarchically self-assemble into larger systems. Similarly, structural DNA nanotechnology harnesses the programmability, specificity, and structural integrity of DNA to engineer synthetic, self-assembled materials. For example, during scaffolded DNA origami, a long single stranded DNA polymer is artificially folded into nanostructures using short oligonucleotides. Once folded, two- and three-dimensional nanostructures may be decorated with proteins, metallic nanoparticles, and semiconductor quantum dots. Using gold nanoparticles and …

Nanoparticles In Solution-Derived Chalcogenide Glass Films, Spencer Novak

All Theses

The results in this thesis are from our efforts to modify the optical properties of solution-derived chalcogenide glass films by the incorporation of nanomaterials. First, the composition Ge23Sb7S70 was selected as the appropriate glass matrix for testing because solution-derived films of this composition have been well-studied in our group. Additionally, this composition was found to be less sensitive to certain processing parameters than As2S3, another well-studied, candidate chalcogenide glass composition, making Ge23Sb7S70 more suitable for the addition of nanomaterials. Optimization of film process parameters was performed to obtain high-quality films appropriate for doping with nanomaterials. This consisted of determining the …

Ultrafast Electron Diffraction Study Of The Dynamics Of Antimony Thin Films And Nanoparticles, Mahmoud Abdel-Fattah

Electrical & Computer Engineering Theses & Dissertations

The ultrafast fast phenomena that take place following the application of a 120 fs laser pulse on 20 nm antimony thin films and 40 nm nanoparticles were studied using time-resolved electron diffraction. Samples are prepared by thermal evaporation, at small thickness (< 10 nm) antimony nanoparticles form while at larger thicknesses we get continuous thin films.

The samples are annealed and studied by static heating to determine their Debye temperatures, which were considerably less than the standard value. The thermal expansion under static heating also yielded the expansion coefficient of the sample material. Nanoparticle samples gave a very accurate thermal expansion coefficient (11 × 10^-6 K^-1).

Ultrafast time resolved electron diffraction …

Analysis Of Interband, Intraband, And Plasmon Polariton Transitions In Silver Nanoparticle Films Via In Situ Real-Time Spectroscopic Ellipsometry, S. A. Little, R. W. Collins, S. Marsillac

Electrical & Computer Engineering Faculty Publications

The dielectric function of Ag nanoparticle films, deduced from an analysis of in situ real-time spectroscopic ellipsometry (RTSE) measurements, is found to evolve with time during deposition in close consistency with the film structure, deduced in the same RTSE analysis. In the nucleation regime, the intraband dielectric function component is absent and plasmon polariton behavior dominates. Only at nuclei contact, does the intraband amplitude appear, increasing above zero. Both intraband and plasmon amplitudes coexist during surface smoothening associated with coalescence. The intraband relaxation time increases rapidly after surface smoothening is complete, also in consistency with the thin film structural evolution.

Mixing Of Nanosize Particles By Magnetically Assisted Impaction Techniques, James V. Scicolone

Dissertations

Nanoparticles and nanocomposites offer unique properties that arise from their small size, large surface area, and the interactions of phases at their interfaces, and are attractive for their potential to improve performance of drugs, biomaterials, catalysts and other highvalue- added materials. However, a major problem in utilizing nanoparticles is that they often lose their high surface area due to grain growth. Creating nanostructured composites where two or more nanosized constituents are intimately mixed can prevent this loss in surface area, but in order to obtain homogeneous mixing, de-agglomeration of the individual nanoparticle constituents is necessary.

Due to high surface area, …

Novel Magnetic Materials For Sensing And Cooling Applications, Anurag Chaturvedi

USF Tampa Graduate Theses and Dissertations

The overall goals of the present PhD research are to explore the giant magnetoimpedance (GMI) and giant magnetocaloric (GMC) effects in functional magnetic materials and provide guidance on the optimization of the material properties for use in advanced magnetic sensor and refrigeration applications.

GMI has attracted growing interest due to its promising applications in high-performance magnetic sensors. Research in this field is focused on the development of new materials with properties appropriate for practical GMI sensor applications. In this project, we have successfully set up a new magneto-impedance measurement system in the Functional Materials Laboratory at USF. We have established, …

Programmable Periodicity Of Quantum Dot Arrays With Dna Origami Nanotubes, Hieu Bui, Craig Onodera, Carson Kidwell, Yerpeng Tan, Elton Graugnard, Wan Kuang, Jeunghoon Lee, William B. Knowlton, Bernard Yurke, William L. Hughes

Materials Science and Engineering Faculty Publications and Presentations

To fabricate quantum dot arrays with programmable periodicity, functionalized DNA origami nanotubes were developed. Selected DNA staple strands were biotin-labeled to form periodic binding sites for streptavidin-conjugated quantum dots. Successful formation of arrays with periods of 43 and 71 nm demonstrates precise, programmable, large-scale nanoparticle patterning; however, limitations in array periodicity were also observed. Statistical analysis of AFM images revealed evidence for steric hindrance or site bridging that limited the minimum array periodicity.