Materials Science and Engineering Commons^™

Effect Of Nanofiller Coating And Loading On Facial Elastomer Physical Properties, Rahmi K. Aulia

Theses & Dissertations

Current materials used for facial prostheses are far from being desirable, and improved properties with “skin-like” feel are needed. This study evaluates property changes induced by sequential additions of uncoated and hydrophobic-coated nano-SiO₂ to polydimethylsiloxane (PDMS) and compares them with those measured for conventional submicron SiO₂-filled materials. Each filler type was sequentially added to vinyl-terminated PDMS at 0%, 0.5%, 5%, 10%, and 15% by weight. Tensile, tear, Durometer hardness, translucency and viscoelastic properties were evaluated, with hardness and translucency also evaluated following 3000 hours of outdoor weathering. Results demonstrated that 15% coated nano-SiO₂-filled PDMS materials …

Synthesis And Characterization Of Bimetallic Gold-Silver (Au-Ag) Nanocatalyst Via Seed Colloid Technique, Berahim Nurafaliana

Student Works (2020-2029)

In the present study, unique catalysts of monometallic gold (Au), silver (Ag) and bimetallic gold-silver (Au-Ag) nanoparticles (NPs) were prepared with different size or diameters by the citrate-thermal reduction and the seed colloidal techniques, respectively. The catalytic nanoparticles were characterized by various advanced analytical techniques such as Ultraviolet-visible spectroscopy (UV-vis), zeta potential, electron dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD), high-resolution transmission electron microscopy (HRTEM), High-angle annular dark-field (HAADF) scanning transmission-electron microscopy (STEM) imaging and the energy dispersive spectroscopy (EDS) elemental mapping. The catalytic performance of the nanoparticles were ascertained through the reduction of 4-nitrophenol (4-NP) to 4-aminophenol (4-AP) in …

Nanohybrid Membrane Synthesis With Phosphorene Nanoparticles: A Study Of The Addition, Stability And Toxicity, Joyner Eke, Philip Alexander Mills, Jacob Ryan Page, Garrison P. Wright, Olga V. Tsyusko, Isabel C. Escobar

Center of Membrane Sciences Faculty Publications

Phosphorene is a promising candidate as a membrane material additive because of its inherent photocatalytic properties and electrical conductance which can help reduce fouling and improve membrane properties. The main objective of this study was to characterize structural and morphologic changes arising from the addition of phosphorene to polymeric membranes. Here, phosphorene was physically incorporated into a blend of polysulfone (PSf) and sulfonated poly ether ether ketone (SPEEK) doping solution. Protein and dye rejection studies were carried out to determine the permeability and selectivity of the membranes. Since loss of material additives during filtration processes is a challenge, the stability …

Synthesis, Self-Assembly And High-Pressure Properties Of Nanoparticles And Hybrid Nanocomposites, Lingyao Meng

Nanoscience and Microsystems ETDs

Nanoparticles have gained significant scientific interests owing to their unique structural dimensions, size- and shape-tunable properties, and numerous fascinating applications, from opto-electronics, sensor devices, to energy, environmental, and medical fields. Furthermore, the synergistic integration of other materials, including organic polymers, with nanoparticles provides new opportunities and strategies to obtain nanocomposites with superior properties and functionalities. While there is already significant research on the synthesis and characterizations of nanoparticles and hybrid nanocomposites, some research questions, such as how to design and control the interfacial morphology in polymer/nanoparticle hybrid nanocomposites, how to synthesize metal- organic framework (MOF) nanoparticles in well-defined and uniform …

In Vivo Biosynthesis Of Inorganic Nanomaterials Using Eukaryotes - A Review, Ashiqur Rahman, Julia Lin, Francisco E. Jaramillo, Dennis A. Bazylinski, Clayton Jeffryes, Si Amar Dahoumane

Life Sciences Faculty Research

Bionanotechnology, the use of biological resources to produce novel, valuable nanomaterials, has witnessed tremendous developments over the past two decades. This eco-friendly and sustainable approach enables the synthesis of numerous, diverse types of useful nanomaterials for many medical, commercial, and scientific applications. Countless reviews describing the biosynthesis of nanomaterials have been published. However, to the best of our knowledge, no review has been exclusively focused on the in vivo biosynthesis of inorganic nanomaterials. Therefore, the present review is dedicated to filling this gap by describing the many different facets of the in vivo biosynthesis of nanoparticles (NPs) using living eukaryotic …

Cancer Biomarker Detection In Human Plasma By Integrating Surface Acoustic Wave And Metal-Enhanced Fluorescence, Yuqi Huang

USF Tampa Graduate Theses and Dissertations

This thesis includes data and discussion about the technique of metal-enhanced fluorescence (MEF) to lower the detection limit of carcinoembryonic antigen (CEA). The detection limit goes down to 100pg/mL level when using MEF substrate made by rapid thermally annealed silver film covered by silica, which has great promise in diagnosing certain types of cancer that uses CEA as detection biomarker, such as pancreatic cancer and colon cancer. To further address the issue of background noises from non-specifically bound proteins (NSB) in complex media, such as plasma, serum, urine and blood, MEF is integrated with surface acoustic wave (SAW) streaming in …

Antibacterial And Anticancer Activity Of Hydrothermally-Synthesized Zinc Oxide Nanomaterials Using Natural Extracts Of Neem, Pepper And Turmeric As Solvent Media, C. Abinaya, R. Manjula Devi, P. Suresh, N. Balasubramanian, N. Muthaiya, N. D. Kannan, J. Annaraj, V. Shanmugaiah, Joshua Pearce, P. Shanmugapriya, J. Mayandi

Michigan Tech Publications, Part 1

A novel and simple wet chemical hydrothermal synthesis method was employed in the preparation of zinc oxide (ZnO) nanoparticles using neem (N), pepper (P) and turmeric (T) extracts as solvent media. The structural and optical properties as well as the antibacterial and anticancer properties of all the samples (ZnO, N/ZnO, P/ZnO, T/ZnO and NPT/ZnO) were characterized and analyzed. Solvent media was found to have an effect on both the size and the morphology of the nanoparticles, which in turn effected their optical and cytotoxic properties. The colony forming unit (CFU) assays were done for E. coli, S. aureus and S. …

Electrospun Fibers With Smart Delivery Of Therapeutic Agents, Zahra Mahdieh

Graduate Student Theses, Dissertations, & Professional Papers

Electrospinning is the most widely studied technique of producing fibers. Delivery of nanoparticles and therapeutic agents from electrospun fibers have potential uses in various fields including drug delivery, filtration, and cosmetics. However, controlling the delivery rate remains the main challenge. In the current study, core-shell structure fibers were developed with zinc oxide nanoparticles applied in the shell composition to improve the pore structure (release pathway) and mechanical stability. Fine-tuned delivery rates were achieved via loading different sizes of silver nanoparticles (Ag NP) inside the fiber core. In vitro drug release assays showed fast, slow, and intermediate delivery rates of 20 …

Tunable Refractive Index Through Spatially Modified Nanoparticle Films For Long-Range Spr Biosensing Applications, Stephen Joshua Binderup

Graduate Research Theses & Dissertations

Despite optics and refraction being among the oldest scientific principles, material limitations have prevented scientists from taking full advantage of the potential this technology holds. Indeed, films with designer optical properties have potential for use in exotic cloaking architectures, advanced waveguides, and precise optical biosensors. This thesis focuses on the fabrication methodology for making thin films with refractive index tuned to a desired value through self-assembly of amorphous nanoparticle films made of organosilicate materials. The inclusion of a slowly evaporating polymer phase along with the organosilicate nanoparticles results in nanopores formed within the film, which effectively reduce the film’s refractive …

Classification And Biological Identity Of Complex Nano Shapes, Luca Boselli, Hender Lopez, Wei Zhang, Qi Cai, Valeria A. Giannone, Jingji Li, Alirio Moura, João M. De Araujo, Jennifer Cookman, Valentina Castagnola, Yan Yan, Kenneth A. Dawson

Articles

Everywhere in our surroundings we increasingly come in contact with nanostructures that have distinctive complex shape features on a scale comparable to the particle itself. Such shape ensembles can be made by modern nano-synthetic methods and many industrial processes. With the ever growing universe of nanoscale shapes, names such as “nanoflowers” and “nanostars” no longer precisely describe or characterise the distinct nature of the particles. Here we capture and digitise particle shape information on the relevant size scale and create a condensed representation in which the essential shape features can be captured, recognized and correlated. We find the natural emergence …

6th Ic4n Book Of Abstracts, Efstathios Meletis, Constantin Politis, Wolfram Schommers, Nikolaos Kanellopoulos

International Conference from Nanoparticles and Nanomaterials to Nanodevices and Nanosystems - Archive

IC4N is a highly interdisciplinary conference focusing on all aspects of nanoscience and nanotechnology addressing global problems in energy, environment and human health. As in previous editions of this highly popular conference series, the overarching goal is to combine a high quality of scientific dialogue with a relaxing environment. This is a unique opportunity for both senior and junior researchers to meet, interact, and stimulate collaborations on a global scale. A number of Plenary, Keynote and invited lectures are planned by renowned scientists from all over the world, making IC4N an international nano forum of the highest quality.

Proceedings published …

Element-Specific Nanoparticle Placement Toward Fabricating Multi-Element Metastructures, Lei Wu

Material Science and Engineering Theses - Archive

Nanoscale entities such as semiconductor nanoparticles, magnetic nanoparticles, metal nanoparticles, and dielectric nanoparticles have attracted a lot of attention due to their novel electrical, optical, and magnetic properties that their bulk materials cannot produce. These unique properties promise applications in nano-optical devices, ultra-sensitive sensors, single electron transistors, and high-density data storages. Moreover, to these captivating properties of the individual nanoparticles, it has been found that novel and scientifically important properties can be obtained when nanoparticles are arranged in specific configurations. Examples include nanoparticle dimers, hexamers, heptamers, and nanoparticle arrays. Until now, however, most studies have focused on one-element nanoparticle systems. …

Green Synthesis Nanocomposite Membranes, Dibakar Bhattacharyya, Vasile Smuleac, Rajender S. Varma, Subhas K. Sikdar

Chemical and Materials Engineering Faculty Patents

A nanocomposite membrane includes a macroporous polymer membrane having a plurality of pores. A plurality of metal nanoparticles are synthesized and immobilized within those plurality of pores. The nanoparticles are reduced and capped with a green reducing and capping agent such as green tea extract.

5th Ic4n Book Of Abstracts, Efstathios Meletis, Nikolaos Kanellopoulos, Constantin Politis, Wolfram Schommers

International Conference from Nanoparticles and Nanomaterials to Nanodevices and Nanosystems - Archive

IC4N is a highly interdisciplinary conference focusing on all aspects of nanoscience and nanotechnology addressing global problems in energy, environment and human health. As in previous editions of this highly popular conference series, the overarching goal is to combine a high quality of scientific dialogue with a relaxing environment. This is a unique opportunity for both senior and junior researchers to meet, interact, and stimulate collaborations on a global scale. A number of Plenary, Keynote and invited lectures are planned by renowned scientists from all over the world, making IC4N an international nano forum of the highest quality.

Proceedings published …

Removal Of Synthetic Azo Dye Using Bimetallic Nickel-Iron Nanoparticles, Shelby L. Foster, Katie Estoque, Michael Voecks, Nikki Rentz, Lauren F. Greenlee

Chemical Engineering Faculty Publications and Presentations

Bimetallic nanoparticles comprised of iron (Fe) and nickel (Ni) were investigated for the removal of an azo dye contaminant in water. Morphology (core shell and alloy) and metal molar ratio (Ni2Fe10, Ni5Fe10, and Ni10Fe10) were tested as key nanoparticle properties. The shelf life of the nanoparticles was tested over a 3-week period, and the effect of initial nanoparticle concentration on dye removal was evaluated. The highest initial nanoparticle concentration (1000 mg/L) showed consistent Orange G removal and the greatest extent of dye removal, as compared to the other tested concentrations (i.e., 750 mg/L, 500 mg/L, and 250 mg/L) for the …

Form Stable Phase-Change Materials, Russell Dent, Marjan Kashfipour, Nitin Mehra, Jiahua Zhu

Williams Honors College, Honors Research Projects

This work investigates the use of two different polyols, xylitol (Xyl) and erythritol (Ery), in conjunction with boron nitride (BN) aerogels, for the purpose of creating thermally conductive composites. While the BN filler in Xyl composites achieved a high anisotropic thermal conductivity of up to 4.53 W/m-K at 18.2 weight percent filler loading, they do not exhibit good phase-change material qualities due to a low solidification enthalpy even at low cooling rates. Alternatively, the BN-Ery composites have shown promising results with a solidification enthalpy of 225.14 J/g and a melting enthalpy of 385.84 J/g at a heat rate of 5 …

Gold-Catalyzed Conversion Of Lignin To Low Molecular Weight Aromatics, Yang Song, Justin K. Mobley, Ali Hussain Motagamwala, Mark Isaacs, James E. Dumesic, John Ralph, Adam F. Lee, Karen Wilson, Mark Crocker

Chemistry Faculty Publications

A heterogeneous catalyst system, employing Au nanoparticles (NPs) and Li–Al (1 : 2) layered double hydroxide (LDH) as support, showed excellent activity in aerobic oxidation of the benzylic alcohol group in β-O-4 linked lignin model dimers to the corresponding carbonyl products using molecular oxygen under atmospheric pressure. The synergistic effect between Au NPs and the basic Li–Al LDH support induces further reaction of the oxidized model compounds, facilitating facile cleavage of the β-O-4 linkage. Extension to oxidation of γ-valerolactone (GVL) extracted lignin and kraft lignin using Au/Li–Al LDH under similar conditions produced a range of aromatic monomers in high yield. …

Incorporation Of Silica Nanoparticles Into The Underlayer Of Pda/Ptfe Thin Coatings, Adedoyin Abe

Mechanical Engineering Undergraduate Honors Theses

Polytetrafluoroethylene (PTFE) is one of the most low friction and corrosion resistant solid lubricants. Prior studies have shown that a polydopamine (PDA) underlayer enhances the durability of PTFE thin coating. In this study, 100, 200, and 300 µL of aqueous silica nanoparticle (NP) solutions were added to the PDA deposition solution. The durability and coefficient of friction of PDA/PTFE thin coatings on stainless steel substrates are investigated with and without incorporating the silica NPs. The coatings were tested in dry contact conditions using a Universal Mechanical Tester (UMT) with a ball-on-flat configuration in a reciprocating motion. It was found that …

Imaging The Three-Dimensional Orientation And Rotational Mobility Of Fluorescent Emitters Using The Tri-Spot Point Spread Function, Oumeng Zhang, Jin Lu, Tianben Ding, Matthew D. Lew

Electrical & Systems Engineering Publications and Presentations

Fluorescence photons emitted by single molecules contain rich information regarding their rotational motions, but adapting single-molecule localization microscopy (SMLM) to measure their orientations and rotational mobilities with high precision remains a challenge. Inspired by dipole radiation patterns, we design and implement a Tri-spot point spread function (PSF) that simultaneously measures the three-dimensional orientation and the rotational mobility of dipole-like emitters across a large field of view. We show that the orientation measurements done using the Tri-spot PSF are sufficiently accurate to correct the anisotropy-based localization bias, from 30 nm to 7 nm, in SMLM. We further characterize the emission anisotropy …

Mesoscale Computational Studies Of Thin-Film Bijels, Joseph M. Carmack

Graduate Theses and Dissertations

Bijels are a relatively new class of soft materials that have many potential applications in the technology areas of energy, medicine, and environmental sustainability. They are formed by the arrest of binary liquid spinodal decomposition by a dispersion of solid colloidal nanoparticles. This dissertation presents an in-depth simulation study of Bijels constrained to thin-film geometries and in the presence of electric fields. We validate the computational model by comparing simulation results with previous computational modeling and experimental research. In the absence of suspended particles, we demonstrate that the model accurately captures the rich kinetics associated with diffusion-based surface-directed spinodal decomposition. …

Surface Area And Electrocatalytic Properties Of Feni Nanoparticles For The Oxygen Evolution Reaction (Oer), James Burrow

Chemical Engineering Undergraduate Honors Theses

Iron-nickel bimetallic electrocatalysts have recently emerged as some of the best candidates for the oxygen evolution reaction (OER) in alkaline electrolyte. Understanding the effects of composition and morphology of iron-nickel nanoparticles is crucial for optimization and enhanced electrocatalyst performance. Both physical surface area and electrochemical surface area (ECSA) are functions of morphology. In this study, four different iron-nickel nanoparticle catalysts were synthesized. The catalysts were varied based on morphology (alloy versus core-shell) and composition (low, medium, and high stabilizer concentration). Brunauer-Emmett-Teller (BET) surface area analysis was conducted on three of the synthesized iron-nickel nanoparticles using a physisorption analyzer while electrochemical …

Supramolecular Aptamer Nano-Constructs For Receptor-Mediated Targeting And Light-Triggered Release Of Chemotherapeutics Into Cancer Cells, Deepak K. Prusty, Volker Adam, Reza M. Zadegan, Stephan Irsen, Michael Famulok

Materials Science and Engineering Faculty Publications and Presentations

Platforms for targeted drug-delivery must simultaneously exhibit serum stability, efficient directed cell internalization, and triggered drug release. Here, using lipid-mediated self-assembly of aptamers, we combine multiple structural motifs into a single nanoconstruct that targets hepatocyte growth factor receptor (cMet). The nanocarrier consists of lipidated versions of a cMet-binding aptamer and a separate lipidated GC-rich DNA hairpin motif loaded with intercalated doxorubicin. Multiple 2′,6′-dimethylazobenzene moieties are incorporated into the doxorubicin-binding motif to trigger the release of the chemotherapeutics by photoisomerization. The lipidated DNA scaffolds self-assemble into spherical hybrid-nanoconstructs that specifically bind cMet. The combined features of the nanocarriers increase serum nuclease …

Investigation Of Thermophysical Properties Of Enhanced Molten Salt Nanofluids For Thermal Energy Storage (Tes) In Concentrated Solar Power (Csp) Systems, Joohyun Seo

Material Science and Engineering Dissertations - Archive

Concentrated solar power (CSP) technologies have a great economical and technical potential for energy production in future. Its incorporation with thermal energy storage (TES) overcomes one of the biggest challenges in most renewable energy technologies, the intermittency of energy supply by natural resources. TES with 15-hour storage capacity is already commercialized to operate a CSP plant for 24 hours a day. When the sunlight is concentrated by mirrors into a small focal point, a heat transfer fluid (HTF) transfers the collected heat to a turbine or an engine to produce electricity and any surplus heat to a TES unit for …

Development Of Plasma Functionalized Nano-Additives For Oils And Study Of Their Tribological Properties, Vinay Sharma

Material Science and Engineering Dissertations - Archive

Lubricants used in motor engines contain various chemical species to help enhance energy efficiency and provide increased longevity. Unfortunately, at the same time, these additives become a source of catalytic poisoning, thus increasing emissions from the tailpipe. With growing concern for the negative impacts of human activities on the environment, regulatory bodies for the automobile lubrication industry have set up strict guidelines for chemical compositions of their end products, including engine oils. This research work is a step towards development of a new class of lubricant additives, which are less harmful to the environment and, simultaneously, also reduce friction and …

Real-Time Atomistic Observation Of Structural Phase Transformations In Individual Hafnia Nanorods, Bethany M. Hudak, Sean W. Depner, Gregory R. Waetzig, Anjana Talapatra, Raymundo Arroyave, Sarbajit Banerjee, Beth S. Guiton

Chemistry Faculty Publications

High-temperature phases of hafnium dioxide have exceptionally high dielectric constants and large bandgaps, but quenching them to room temperature remains a challenge. Scaling the bulk form to nanocrystals, while successful in stabilizing the tetragonal phase of isomorphous ZrO₂, has produced nanorods with a twinned version of the room temperature monoclinic phase in HfO₂. Here we use in situ heating in a scanning transmission electron microscope to observe the transformation of an HfO₂ nanorod from monoclinic to tetragonal, with a transformation temperature suppressed by over 1000°C from bulk. When the nanorod is annealed, we observe with …

Controlled Synthesis And Utilization Of Metal And Oxide Hybrid Nanoparticles, Cameron Cowgur Crane

Graduate Theses and Dissertations

This dissertation reports the development of synthetic methods concerning rationally-designed, hybrid, and multifunctional nanomaterials. These methods are based on a wet chemical, solution phase approach that utilizes the knowledge of synthetic organic and inorganic chemistry to generate building blocks in solution for the growth of nanocrystals and hybrid nanostructures. This work builds on the prior knowledge of shape-controlled synthesis of noble metal nanocrystals and expands into the challenging realm of the more reactive first row transition metals. Specifically, a microemulsion sol-gel method was developed to synthesize Au-SiO2 dimers as precursors for the synthesis of segmented heterostructures of noble metals that …

Synthesis Of Discrete Transition Metal (Ni, Fe, Co, Mn) Phosphide Nanoparticles: Compositional Effect On Catalytic And Magnetic Properties, Da Li

Wayne State University Dissertations

This dissertation research is focused on the synthesis, characterization of binary and ternary transition metal (Ni, Co, Fe, Mn) phosphide nanomaterials and their catalytic and magnetic properties.

A phase-control strategy enabling the arrested-precipitation synthesis of nanoparticles of Ni5P4 and NiP2 is presented. The composition and purity of the product can be tuned by changing key synthetic levers, including the metal precursor, the oleylamine (OAm) and Trioctylphosphine (TOP) concentrations, temperature, time and the presence or absence of a moderate temperature soak step to facilitate formation of Ni and/or Ni-P amorphous nanoparticle intermediates.

New CoxFe2-xP nanoparticles (0 ≤ x ≤ 2), Co2-xMnxP …

Synthesis, Characterization, And Enhanced Magnetic Properties Of Iron Carbide Nanomaterials, Brent M. Williams

Theses and Dissertations

Permanent magnets are classified as hard magnetic materials with the main purpose of generating flux for applications such as electric motors, turbines, and hard drives. High coercivity, magnetic remanence, and saturation values with high stability are some of the requirements for permanent magnets. Rare-earth magnets including neodymium and samarium based magnets are known to have superior magnetic properties due to their high magnetocrystalline anisotropy. However, due to the price of rare-earth materials development of alternate permanent magnets composed of inexpensive materials is an ongoing process. Previously cobalt carbide (Co_xC) have shown promise as a potential rare-earth free magnet …

Study Of Stability And Thermal Conductivity Of Nanoparticles In Propylene Glycol, Sumit Mahajan

All Graduate Theses, Dissertations, and Other Capstone Projects

This thesis studied the effects of gravity induced settling, thermophoresis and Brownian motion on the thermal conductivity of the Aluminum Oxide (Al2O3) nanofluids. The base fluid was propylene glycol. The effects were studied by making three samples with volumetric percentages of 0.2 %, 2% and 3% Al2O3 in propylene glycol. Sets of 22 experiments were conducted over time to understand the behavior of settling. All samples were manually mixed each time the experiment was conducted. A Thermtest Transient Plane Source TPS 500S was used to measure the thermal conductivity. Volumetric percentages and diameters of nanoparticle were chosen so that the …

Life Cycle Assessment And Comparison Of Magnesium Oxide Nanoparticles Prepared By Aqueous And Microwave Synthesis Methods, Jesse Cartland

Materials Engineering

Abstract: Magnesium oxide nanoparticles are being used increasingly as catalysts for organic synthesis, fuel oil additives, and CO₂ adsorbents. There are many ways to produce magnesium oxide nanoparticles, but there is little information available regarding the environmental costs of production. As demand for environmentally friendly materials increases, it is important to understand environmental impact differences between various production methods. This study will compare the differences in embodied energy and global warming potential (GWP) between two synthesis methods: microwave combustion synthesis (microwave synthesis) and oxidation of magnesium hydroxide (aqueous synthesis). The resulting nanoparticles were characterized using scanning electron microscopy (SEM), …