Open Access. Powered by Scholars. Published by Universities.®

Materials Science and Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

2026

Discipline
Institution
Keyword
Publication
Publication Type
File Type

Articles 451 - 480 of 701

Full-Text Articles in Materials Science and Engineering

Structure And Morphology Of Ultradispersed Erbium Ytterbium Oxide Powders Obtained By Deposition Method, Eygeniy N. Poddenezhny, Andrei A. Boiko, Natalya E. Drobyshevskaya, Vladimir S. Urbanovich, Ekaterina E. Trusova Mar 2026

Structure And Morphology Of Ultradispersed Erbium Ytterbium Oxide Powders Obtained By Deposition Method, Eygeniy N. Poddenezhny, Andrei A. Boiko, Natalya E. Drobyshevskaya, Vladimir S. Urbanovich, Ekaterina E. Trusova

CHEMISTRY AND CHEMICAL ENGINEERING

The aim of research is to develop a new method for synthesis of ultra-dispersed crystalline powders of lanthanide oxides, in particular, erbium oxide doped with ytterbium oxide, intended for making transparent ceramics. The formation of nanostructured powders of the erbium oxide – ytterbium oxide system using deposition and heat treatment processes by co-deposition of salt solutions mixed with ammonium carbonate and hydrogen peroxide complex solution at temperature of 10 °C followed annealing at 100, 650, 900 and 1200°C was studied. Studies of the morphological and structural characteristics of the powders using scanning electron microscopy and X-ray phase analysis showed that …

Go to article

Chemical Design Strategies For Hybrid Metal Halide Semiconductors With Enhanced Stability And Optoelectronic Properties, Ali Azmy Mar 2026

Chemical Design Strategies For Hybrid Metal Halide Semiconductors With Enhanced Stability And Optoelectronic Properties, Ali Azmy

USF Tampa Graduate Theses and Dissertations

Metal halide semiconductors have rejuvenated the attention of the scientific community for the last two decades owing to their photophysical and electronic properties. However, these materials have some limitations that hinder their commercialization and widespread application. One major limitation of these materials is their instability under ambient and operating conditions of moisture, head, light and radiation exposure. Here, we report multiple chemical design strategies to address the stability issues of these materials while simultaneously maintaining their exceptional optoelectronic properties. Such design strategies allowed the acquisition of the first members of the family of porous metal halide semiconductors which exhibit record …

Go to article

Mechanical, Thermal And Fire Behaviour Of Hemp-Based Composites With Different Binders For Sustainable Building Applications, Anilcan Aygun, Fahri Birinci, Selim Aytac, Ali Kemal Ayan, Hasan Alp Sahin, Ibrahim Isildak Mar 2026

Mechanical, Thermal And Fire Behaviour Of Hemp-Based Composites With Different Binders For Sustainable Building Applications, Anilcan Aygun, Fahri Birinci, Selim Aytac, Ali Kemal Ayan, Hasan Alp Sahin, Ibrahim Isildak

Journal of Sustainable Construction Materials and Technologies

This study investigates the physical, mechanical and thermal properties of hemp-based composites produced with traditional binders such as lime, cement, gypsum, clay, and water-based glue. Hemp fractions of different sizes (splinter, shiv, fiber and powder) were combined with these binders to manufacture cube and plate specimens, which were tested for physical, mechanical, thermal, and temperature resistance properties. The study aims to compare the mechanical, physical, thermal, and fire behaviour of these composites to assess their suitability for sustainable construction applications. The hemp-based composites were tested for unit weight, water absorption, compressive strength and thermal conductivity. Most specimens are lightweight (<1000 kg/m3), and exhibit good thermal insulation performance and high compressive deformability, making them suitable for seismic-prone regions. The glue-based composite had the lowest unit weight, measured as 330 kg/m3. Thermal conductivity ranged from 0.051 to 0.243 W/m· K, with several mixtures performing better than natural pumice. While cement-based composites showed the highest compressive strength, ranging from 5.5 to 24.8 kg/cm2, natural hydraulic lime is the lowest. Water absorption was high, and moisture release occurred slowly across all hemp fractions. Combustion tests indicated that hemp-based materials have moderate temperature resistance, with charring temperatures ranging from 238–265°C for raw hemp and 300–385°C when mixed with binders. Overall, hemp-based composites are lightweight, eco-friendly, and suitable for non-load-bearing construction and insulation applications. However, improvements in moisture resistance and long-term durability are necessary to enhance their practical applicability.

Go to article

Sustainable Cow Dung Bricks: An Innovative Approach To Eco-Friendly Masonry With Enhanced Thermal And Mechanical Performance, Nagesh Sugandhi, Sachin Patil, Satish Reddy, Ashwini G, Santosh Kumar Mar 2026

Sustainable Cow Dung Bricks: An Innovative Approach To Eco-Friendly Masonry With Enhanced Thermal And Mechanical Performance, Nagesh Sugandhi, Sachin Patil, Satish Reddy, Ashwini G, Santosh Kumar

Journal of Sustainable Construction Materials and Technologies

This study explores the development, characterization, and performance of sustainable cow dung bricks using locally sourced organic (cow dung) and mineral (clay, quartz sand, feldspar, lime) constituents for non-load-bearing masonry in India. Three blends with varying cow dung content (70%, 75%, 80%) were mixed, molded, air dried, and cured without kiln firing to reduce environmental impact. The bricks' mechanical properties—compressive strength, water absorption, bulk density, flexural strength, shore hardness, and modulus of elasticity—were systematically evaluated with complete statistical documentation (n = 6 replicates per formulation per test age). Microstructural features were investigated using Fourier Transform Infrared Spectroscopy (FTIR) and X-Ray …

Go to article

Sustainable Cement-Blast Furnace Slag Mortar, Richa Jain, Harshit Jain, Ashish Nim Mar 2026

Sustainable Cement-Blast Furnace Slag Mortar, Richa Jain, Harshit Jain, Ashish Nim

Journal of Sustainable Construction Materials and Technologies

New building materials that required and produced less energy are need of today's infrastructure development. The ability of such building materials to promote sustainable development always puts its demand in active mode. With huge consumption of naturally occurring materials in building construction, the problem related to environment degradation is now common for world. Along with this, world is also facing the problem of reuse, recover and scientifically approved disposal of non-biodegradable wastes. Blast furnace slag (BFS) is one of those steel industry wastes that are abundantly available and their disposal arises as prime challenge for industries. This research work makes …

Go to article

Comparative Study Of Cement-Rice Husk Ash Stabilized Bricks And Fired Clay Bricks, Daniel R. Samson, Emmanuel S. Leo Mar 2026

Comparative Study Of Cement-Rice Husk Ash Stabilized Bricks And Fired Clay Bricks, Daniel R. Samson, Emmanuel S. Leo

Tanzania Journal of Science

In some countries, fired clay bricks (FCBs) are widely used for construction, but their production is energy-intensive, relies largely on firewood, and contributes to deforestation and carbon emissions. This study explores unfired clay bricks stabilised with cement and rice husk ash (RHA) as a sustainable alternative, using Dakawa ward in the Morogoro Region, Tanzania, as a case study. The bricks, with a clay of plasticity index 17%, were stabilized with 6%, 10%, and 14% cement by mass, moulded into 40 mm cubes, and cured for 28 days. The compressive strengths achieved were 1.5, 3.6, and 4.1 MPa with water absorption …

Go to article

Polymer Microstructures For Advanced Biomanufacturing, Tongyao Wu Mar 2026

Polymer Microstructures For Advanced Biomanufacturing, Tongyao Wu

LSU Doctoral Dissertations

With the continued growth of the biopharmaceutical industry, the demand for scalable, robust, and resource-efficient platforms for large-scale mammalian cell culture is amplified. Recent developments in microfluidic technology, such as precise control of the microenvironment, showed the potential to improve the performance of cell culture systems. However, constrained by scalability and operational efficiency, applying such approaches to large-scale cell culture and biopharmaceutical production presents challenges. This dissertation addresses these challenges through three independent but conceptually related technological developments. First, a roll-to-roll (R2R) fabrication process was developed for the scalable production of hollow microcarriers (HMCs). HMCs provide three-dimensional microenvironments suitable for …

Go to article

Wasting The Risk, Or Risking The Waste? Understanding The Trends Of Critical Raw Material Loss Into Waste Streams During Copper And Aluminium Processing, Ella Lausberg, Joël Brugger, Rahul Ram, John R. Owen, Deanna Kemp, Micheal S. Moats, Jonathan Hamisi, Vanessa N.L. Wong Mar 2026

Wasting The Risk, Or Risking The Waste? Understanding The Trends Of Critical Raw Material Loss Into Waste Streams During Copper And Aluminium Processing, Ella Lausberg, Joël Brugger, Rahul Ram, John R. Owen, Deanna Kemp, Micheal S. Moats, Jonathan Hamisi, Vanessa N.L. Wong

Materials Science and Engineering Faculty Research & Creative Works

Many critical raw materials (CRM) necessary in the transition to carbon-neutral energy reside in the waste streams of mining projects, as they are by-products and often not recovered alongside the primary metal. This work aims to document (i) the loss and potential recovery of by-product metals during the host commodity processing and (ii) the consequences of non-recovery, via a multi-scale risk–reward analysis. The information on the deportment of by-product metals through processing circuits is crucial for treating them as a resource, without which they risk near-permanent loss when treated as 'waste'. We review the deportment of tellurium and selenium as …

Go to article

Improving Hydrogen Storage Kinetics Of Polymeric Composites Via Additions Of La0.6Ce0.4Ni5 And Carbon Particles, Muhammad M. Rahman, Fenil J. Desai, Ramazan Asmatulu, Md. Nizam Uddin, Karina Suarez-Alcantara Mar 2026

Improving Hydrogen Storage Kinetics Of Polymeric Composites Via Additions Of La0.6Ce0.4Ni5 And Carbon Particles, Muhammad M. Rahman, Fenil J. Desai, Ramazan Asmatulu, Md. Nizam Uddin, Karina Suarez-Alcantara

Faculty Publications

Nanostructured metal hydrides have garnered interest in their potential to store hydrogen safely and effectively as an energy carrier. By partially substituting lanthanum (La) with cerium (Ce), the structure of lanthanum pentanickel (LaNi5) was maintained to create a novel encapsulated La–Ce–Ni-based metal hydride (La0.6Ce0.4Ni5). The incorporation of metal-polymer composites can protect metal hydrides from oxidation and enhance cyclic stability. Carbon-based materials such as graphene and multi-walled carbon nanotubes (MWCNTs) not only store hydrogen but also improve the reaction kinetics and address thermal management issues. This study presents La0.6Ce0.4Ni …

Go to article

Impact Of Glass Powder As A Sustainable Material On The Workability, Strength, And Durability Properties In High-Performance Basalt Fiber Reinforced Concrete: A Statistical Analysis, Ahmed Fathi Mohamed Salih Mar 2026

Impact Of Glass Powder As A Sustainable Material On The Workability, Strength, And Durability Properties In High-Performance Basalt Fiber Reinforced Concrete: A Statistical Analysis, Ahmed Fathi Mohamed Salih

Journal of Sustainable Construction Materials and Technologies

The global construction sector is increasingly challenged to balance environmental sustainability with the growing demand for durable, high-performance materials. As cement production continues to be a major source of anthropogenic CO2 emissions, the incorporation of alternative, low-impact binders has become a key strategy for reducing the environmental footprint of concrete. In this context, glass powder (GP)—a finely ground industrial by-product rich in amorphous silica—has emerged as a promising partial replacement for Portland cement. Its pozzolanic reactivity contributes to improved hydration and matrix densification, while its use also supports circular economy principles by diverting waste glass from landfills. At the same …

Go to article

Developing And Delphi-Validating A Phase-Based Sustainable Bsc Framework For Contractors' Sustainable Productivity Management In Developing Countries, Truong Van Luu, Le Minh Long Nguyen Mar 2026

Developing And Delphi-Validating A Phase-Based Sustainable Bsc Framework For Contractors' Sustainable Productivity Management In Developing Countries, Truong Van Luu, Le Minh Long Nguyen

HBRC Journal

This study develops and validates, using the Delphi method, a conceptual decision-support framework for construction contractors' sustainable productivity management (CSPM) in developing-country settings. Guided by KAMET rules, semi-structured interviews were conducted with 15 experts to elicit, refine, and reach consensus on a set of productivity management attributes that construction contractors can realistically apply. The outcome is 29 feasible productivity management attributes, organized under the four Sustainable Balanced Scorecard (SBSC) perspectives and mapped onto five management phases (planning, organizing, staffing, leading/coordination, and controlling). Rather than predicting or demonstrating productivity gains, the framework provides a practical roadmap for diagnosing capability gaps, prioritizing …

Go to article

Heuristic Particle Swarm Optimization Method For The Stability Analysis Of Geosynthetics-Reinforced Slopes, Hoda Mostafa, Ibrahim Mashhour Mar 2026

Heuristic Particle Swarm Optimization Method For The Stability Analysis Of Geosynthetics-Reinforced Slopes, Hoda Mostafa, Ibrahim Mashhour

HBRC Journal

Slope stability is considered one of the crucial topics in geotechnical engineering. Accurate soil slopes stability analyses are essential as slope failures could cause catastrophic environmental and human disasters. Geosynthetics are widely used as stabilizing elements in slope stability analyses. Incorporating geosynthetic reinforcement generally improves the global factor of safety against slope failure. However, in practice, analyses must not only focus on the global slope stability but should also account for any sliding along geosynthetic interfaces, since geosynthetics are considered as week layers within the reinforced soil mass and act as potential slip interfaces that should be checked for stability. …

Go to article

Investigating Confounding Factors In Shear Wave Speed Measurements Of Fibrotic Liver Tissues: A Computer Simulation Study, Emily J. Miller, Yongmei Jin, Jingfeng Jiang Mar 2026

Investigating Confounding Factors In Shear Wave Speed Measurements Of Fibrotic Liver Tissues: A Computer Simulation Study, Emily J. Miller, Yongmei Jin, Jingfeng Jiang

Michigan Tech Publications

Screening patients with liver fibrosis and identifying those at risk of developing advanced liver fibrosis is of clinical interest. Shear wave elastography (SWE), a promising non-invasive screening tool used to distinguish healthy tissue from diseased tissue, measures tissue shear wave speed (SWS) to describe tissue stiffness and identify liver fibrosis. However, considerable variations in the reported results have been found. We propose that the heterogeneity of the liver tissue background, such as the presence of fatty liver tissue and the preferred local orientation of the scarred fibrotic liver tissues embedded into the liver parenchyma, may contribute to the uncertainty in …

Go to article

Co-Electrospinning Polyacrylonitrile (Pan) / Polymer Of Intrinsic Microporosity-1 (Pim-1) For Electrochemical-Based Sensor For Pyridine Detection And Absorption, Samar A. Salim Mar 2026

Co-Electrospinning Polyacrylonitrile (Pan) / Polymer Of Intrinsic Microporosity-1 (Pim-1) For Electrochemical-Based Sensor For Pyridine Detection And Absorption, Samar A. Salim

Nanotechnology Research Centre

The electrospinning of the polymer of intrinsic microporosity-1 (PIM-1) poses challenges due to its limited solubility and tendency to form bead-like structures at high concentrations. This work details the synthesis and analysis of electrospun composite fibers made from polyacrylonitrile (PAN) and PIM-1 for electrochemical applications. The data analysis confirmed the successful incorporation of PIM-1 into the PAN matrix. The fiber characteristics were significantly influenced by PIM-1 loading (1–10%), resulting in fiber diameters ranging from 0.8 to 1.7 μm. A 10% concentration of PIM-1 results in the formation of macropores with diameters ranging from 0.5 to 1.7 μm. Optical analysis using …

Go to article

The Effect Of Si And Zr On The Formation Of Al3x And V-Phase In A 6005a Alloy With Sc—Part 1: Alloy Design And Heat Treatment Selection, Eli A. Harma, Timothy Langan, Paul Sanders Mar 2026

The Effect Of Si And Zr On The Formation Of Al3x And V-Phase In A 6005a Alloy With Sc—Part 1: Alloy Design And Heat Treatment Selection, Eli A. Harma, Timothy Langan, Paul Sanders

Michigan Tech Publications

Adding Sc to 6xxx series alloys has led to inconsistent results due to the formation of the high-temperature, thermodynamically stable V-phase (AlSc2Si2). Thermo-Calc single-axis equilibrium and phase diagram calculations were employed to identify V-phase formation with varying Si and Zr concentrations, indicating that increasing Zr and decreasing Si lowered the V-phase equilibrium volume fraction. Increasing Zr also shifted the V-phase equilibrium to higher Si concentrations. To access real-world influences of Zr and Si, four compositions were cast with different Si and Zr concentrations: a high-Si, low-Zr alloy; a medium-Si, medium-Zr alloy; a low-Si, high-Zr alloy; and a baseline alloy without …

Go to article

Creation Of The 2-Way Cross Laminated Timber Subroutine For Computing Dynamic Analysis Parameters, Joseph Freitas Mar 2026

Creation Of The 2-Way Cross Laminated Timber Subroutine For Computing Dynamic Analysis Parameters, Joseph Freitas

Architectural Engineering

This document will describe the inputs, methodology, and outputs for the CLT 2-way subroutine for cases with and without openings recently added to a proprietary structural analysis software. For the sake of simplicity, most of the discussion will be focused on cases without openings from here on out, as the verification process for a novel method for cases with openings is still in progress. The CLT 2-way module calculates multi-point resistance functions for panels without openings by automating the procedure outlined in an industry-standard structural design manual. The subroutine also finds the appropriate dynamic response factors, kinetic load multipliers, mass, …

Go to article

New Insights Into Dynamic Evolution Of Colloidal Network Structure During Early-Age Hardening Of Cementitious Materials, Hengrui Liu, Kaiyin Zhao, Shipeng Zhang, Hanghua Zhang, Shuangshuang Liu, Lucen Hao, Hongyan Ma, Kamal Khayat, Chi Sun Poon Mar 2026

New Insights Into Dynamic Evolution Of Colloidal Network Structure During Early-Age Hardening Of Cementitious Materials, Hengrui Liu, Kaiyin Zhao, Shipeng Zhang, Hanghua Zhang, Shuangshuang Liu, Lucen Hao, Hongyan Ma, Kamal Khayat, Chi Sun Poon

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The evolution of microstructure in cementitious materials during their transition from fluid to solid state plays a critical role in determining their ultimate mechanical strength and overall performance. This hydration stage primarily involves a dynamic densification process occurring within the colloidal network. However, the field of cement-based materials currently lacks a comprehensive theoretical framework and associated parameters capable of effectively characterizing the specific structural regions within this network. In this study, we propose an Improved Particle Linkage (IPL) theory for describing the strength, types, and quantities of particle linkages within colloidal network. The IPL theory classifies the internal network structure …

Go to article

A Borophosphate Glass Doped With Cobalt Oxide Improves Skeletal Muscle Structure And Function In Myopathic Mice, Jacob A. Kendra, Alexandra G. Naman, Rebekah L. Blatt, Carla D. Zingariello, Richard K. Brow, Steven S. Segal, Aaron B. Morton Mar 2026

A Borophosphate Glass Doped With Cobalt Oxide Improves Skeletal Muscle Structure And Function In Myopathic Mice, Jacob A. Kendra, Alexandra G. Naman, Rebekah L. Blatt, Carla D. Zingariello, Richard K. Brow, Steven S. Segal, Aaron B. Morton

Materials Science and Engineering Faculty Research & Creative Works

Skeletal muscle myopathy remains a significant cause of disability with limited treatment strategies. Advancements in tissue engineering have led to the development of borophosphate bioactive glasses (BPBGs) capable of enhancing skeletal muscle structure and function. Using a mouse model of severe myopathy (D2.mdx), we investigated muscle force, regeneration, angiogenesis and inflammation at 14, 70 and 140 days post-treatment (dpt). Tibialis anterior (TA) muscles of D2.mdx mice that received a single injection of cobalt oxide-doped BPBG (CoO-TRIM) particles exhibit greater active force, myofiber size, and regeneration through 70 dpt compared to control D2.mdx mice injected with Saline. Vascular endothelial growth factor …

Go to article

Microstructural Evolution Of Zirconium Diboride Irradiated With 5–10 Mev Au Ions At Room Temperature And 570 °C, Narrie Loftus, José Olivares, Miguel Crespillo, Esther Enríquez Pérez, Jeremy Watts, Eric W. Bohannan, Gregory Hilmas, William Fahrenholtz, Joseph Graham Mar 2026

Microstructural Evolution Of Zirconium Diboride Irradiated With 5–10 Mev Au Ions At Room Temperature And 570 °C, Narrie Loftus, José Olivares, Miguel Crespillo, Esther Enríquez Pérez, Jeremy Watts, Eric W. Bohannan, Gregory Hilmas, William Fahrenholtz, Joseph Graham

Materials Science and Engineering Faculty Research & Creative Works

Zirconium diboride was irradiated with 5 MeV Au2 + , 7 MeV Au4+ and 10 MeV Au3+ ions at room temperature and 570 °C to doses from 1 to 8 displacements per atom (dpa). Grazing incidence X-ray diffraction (GIXRD) analysis revealed no secondary phase formation. Rietveld analysis of the GIXRD data indicated an accumulation of microstrain at low dpa and room temperature. Dislocations observed in transmission electron microscopy (TEM) cross-sections are likely the main contributor to the microstrain. High dpa and high-temperature samples exhibit lower lattice distortion than lower dpa samples, suggesting the presence of enhanced defect …

Go to article

Thermally Stable Sic Particulate-Reinforced Sic Composites Up To 2000 ℃ Fabricated By Precursor Impregnation And Pyrolysis Method, Jian Gu, Vu Viet Hung, Lun Feng, William G. Fahrenholtz, Daejong Kim, Seyoung Kim, Sea Hoon Lee Mar 2026

Thermally Stable Sic Particulate-Reinforced Sic Composites Up To 2000 ℃ Fabricated By Precursor Impregnation And Pyrolysis Method, Jian Gu, Vu Viet Hung, Lun Feng, William G. Fahrenholtz, Daejong Kim, Seyoung Kim, Sea Hoon Lee

Materials Science and Engineering Faculty Research & Creative Works

The thermo-mechanical properties of SiC particulate-reinforced SiC composites (SiC-PRCs), fabricated using precursor impregnation & pyrolysis (PIP) process, were analyzed up to 2000 ℃. The relative density of the SiC-PRCs after 4 PIP cycles was 88.6 %. The number of PIP cycles required decreased to nearly half compared with the conventional PIP method by using ultra-high concentration slurries up to 70 vol%. In addition, room-temperature bending strength (215 MPa) and Young's modulus (269 GPa) improved as the solid loading of the slurry increased. The bending strength increased to 232 MPa at 2000 ℃ in Ar. Despite the thermal deterioration of the …

Go to article

A Software Package For Generating Robust And Accurate Potentials Using The Moment Tensor Potential Framework, Josiah Roberts, Biswas Rijal, Simon Divilov, Jon Paul Maria, William G. Fahrenholtz, Douglas E. Wolfe, Donald W. Brenner, Stefano Curtarolo, Eva Zurek Mar 2026

A Software Package For Generating Robust And Accurate Potentials Using The Moment Tensor Potential Framework, Josiah Roberts, Biswas Rijal, Simon Divilov, Jon Paul Maria, William G. Fahrenholtz, Douglas E. Wolfe, Donald W. Brenner, Stefano Curtarolo, Eva Zurek

Materials Science and Engineering Faculty Research & Creative Works

We present the Plan for Robust and Accurate Potentials (PRAPs), a software package for training and using moment tensor potentials (MTPs) in concert with the Machine Learned Interatomic Potentials (MLIP) software package. PRAPs provides an automated workflow to train MTPs using active learning procedures, and a variety of utilities to ease and improve workflows when utilizing the MLIP software. PRAPs was originally developed in the context of crystal structure prediction, in which one calculates convex hulls and predicts low energy metastable and thermodynamically stable structures, but the potentials PRAPs develops are not limited to such applications. PRAPs produces two potentials, …

Go to article

Superhard Refractory High-Entropy Diborides, M. D. Hossain, N. S. Mcilwaine, N. O. Marquez-Rios, A. C. Feltrin, V. Chawla, R. A. Mayanovic, W. G. Fahrenholtz, D. Penumadu, E. Zurek, D. W. Brenner, D. E. Wolfe, S. Divilov, H. Eckert, S. Curtarolo Mar 2026

Superhard Refractory High-Entropy Diborides, M. D. Hossain, N. S. Mcilwaine, N. O. Marquez-Rios, A. C. Feltrin, V. Chawla, R. A. Mayanovic, W. G. Fahrenholtz, D. Penumadu, E. Zurek, D. W. Brenner, D. E. Wolfe, S. Divilov, H. Eckert, S. Curtarolo

Materials Science and Engineering Faculty Research & Creative Works

Using first-principles calculations and companion experimental validations, we demonstrate that the valence electron concentration (VEC) can be used to self-consistently parameterize the bonding characteristics of high-entropy diborides (HEBs) and in turn predict their mechanical properties. When VEC is 10.0 per formula unit (f.u.), HEBs enter the superhard category where Hv>40GPa because bonding states are optimally filled to resist shear deformation. Conversely, above or below a VEC of 10.0, the hardness decreases due to the filling of antibonding or the emptying of bonding states of the HEBs, respectively. This result is supported by analyses of the electronic structure, bonding, antibonding, …

Go to article

Current Research Progress On Electrode Materials For All-Vanadium Redox Flow Batteries, Wen-Qi Wang, Jie Jin, Li-Min Wang, Xin-Yue Liu, Tao Cheng, Yong Hou, Han Xue, Zhi-Yu Wang, Bo Liu, Jia-Bao Liu, Xu-Bin Lu Feb 2026

Current Research Progress On Electrode Materials For All-Vanadium Redox Flow Batteries, Wen-Qi Wang, Jie Jin, Li-Min Wang, Xin-Yue Liu, Tao Cheng, Yong Hou, Han Xue, Zhi-Yu Wang, Bo Liu, Jia-Bao Liu, Xu-Bin Lu

Journal of Electrochemistry

The redox active species in all-vanadium redox flow batteries (VRFBs) reside in the electrolyte, while the heterogeneous reactions occur on the electrode surface; the electrode is therefore the decisive platform for dynamic adsorption, electron transfer, and ion conversion, especially for the VO2+/VO2+ and V2+/V3+ couples. One of the major challenges for VRFBs is the slow charge transfer in VO2+/VO2+ and V2+/V3+ reactions, mainly caused by poor catalytic performance of electrodes and weak adhesion of catalysts to electrodes. This review focuses on the key challenges and recent …

Go to article

Triphenylmethane-Derived Levelers For High-Speed Redistribution Layer Copper Electroplating Of Tailored Surface Morphologies, Zi-Hao Song, Wei-Bin Wang, Xiao-Hui Liu, Xiao-Min Han, Yi Zhou, Rui Huang, Yan-Xia Jiang, Zhe Li, Xiao-Wei Liu, Mei-Ling Xiao, Hong-Gang Liao, Wei-Lin Xu, Rong Sun Feb 2026

Triphenylmethane-Derived Levelers For High-Speed Redistribution Layer Copper Electroplating Of Tailored Surface Morphologies, Zi-Hao Song, Wei-Bin Wang, Xiao-Hui Liu, Xiao-Min Han, Yi Zhou, Rui Huang, Yan-Xia Jiang, Zhe Li, Xiao-Wei Liu, Mei-Ling Xiao, Hong-Gang Liao, Wei-Lin Xu, Rong Sun

Journal of Electrochemistry

Redistribution Layer (RDL), composed of layered dielectrics and electroplated copper materials, is a basic structure to rearrange numerous I/O pads on the chip surface in wafer-level advanced packaging. As the key chemicals in electrolyte baths, electroplating additives have undergone continuous development to meet the industrial needs for high-speed and fine-line/fine-pitch applications. Meanwhile, the intricate relationships between additive chemical structures and electroplated copper properties are yet to be well understood. In this work, a pair of triphenylmethane-based dye molecules, i.e., gentian violet (GV) and methyl green (MG), was comparatively investigated as levelers for high-speed RDL copper electroplating. Compared to GV, significantly …

Go to article

Control Of Pore Nucleation And Rearrangement Kinetics During Aluminium Anodizing In Phosphoric Acid Electrolyte, Ilya V. Roslyakov, Nikita A. Shirin, Dmitry M. Tsymbarenko, Sergei N. Pavlov, Sergey E. Kushnir, Nikolay V. Lyskov, Kirill S. Napolskii Feb 2026

Control Of Pore Nucleation And Rearrangement Kinetics During Aluminium Anodizing In Phosphoric Acid Electrolyte, Ilya V. Roslyakov, Nikita A. Shirin, Dmitry M. Tsymbarenko, Sergei N. Pavlov, Sergey E. Kushnir, Nikolay V. Lyskov, Kirill S. Napolskii

Journal of Electrochemistry

Anodic aluminium oxide (AAO) porous films with an interpore distance of several hundred nanometers are of great interest due to their unique interaction with visible and near-infrared light, and high thermal stability up to 1500 °C. These porous films are prepared by aluminium anodizing at high voltages in weak acids, leading to a slow kinetics of initial stages of porous structure formation. Here, we propose an approach to accelerate AAO formation in electrolytes based on weak acids such as phosphoric acid. Aluminium foils, pre-patterned using first anodizing under different conditions and subsequent selective dissolution of a sacrificial AAO layer, were …

Go to article

Balancing Carbon Emissions In Façade Of Residential Buildings Through Bim-Lca: A Comparative Analysis Of Insulation Materials, Mehran Alipour Feb 2026

Balancing Carbon Emissions In Façade Of Residential Buildings Through Bim-Lca: A Comparative Analysis Of Insulation Materials, Mehran Alipour

Journal of Sustainable Construction Materials and Technologies

Thermal insulation materials play a significant role in balancing buildings' total carbon emissions. Balancing involves applying the optimized amount of insulation materials to avoid excessive emissions in either the operational or embodied phases. Due to the wide range of insulation materials and variations of their specifications, it is vital to analyse them individually. The focus of this study is to optimize the amount of insulation materials in the facades of Residential Buildings (RB) to balance the amount of Operational Carbon Emissions (OCE) and Embodied Carbon Emissions (ECE) by applying the Building Information Modelling-Life Cycle Assessment (BIM-LCA) integration method. The Life …

Go to article

Integrating Sustainable Material Procurement In Construction Waste Management: A Systematic Review With Narrative Synthesis For The Libyan Construction Sector, Ramzi Fouzi Hamad Abdullah, Safaa N Saud Al-Humairi, Zunirah Binti Mohd Talib Feb 2026

Integrating Sustainable Material Procurement In Construction Waste Management: A Systematic Review With Narrative Synthesis For The Libyan Construction Sector, Ramzi Fouzi Hamad Abdullah, Safaa N Saud Al-Humairi, Zunirah Binti Mohd Talib

Journal of Sustainable Construction Materials and Technologies

Integrating sustainable material procurement with construction waste management is essential to reduce construction and demolition waste in Libya, where current practices remain largely reactive and disposal-oriented. This narrative review aims to develop a conceptual framework linking procurement decisions to waste-generation pathways in Libyan construction projects, clarifying how proactive, sustainability-driven purchasing can serve as a primary driver of waste prevention. Using a PRISMA-guided systematic search of Web of Science, Scopus, and IEEE Xplore for 2001–2026, and a bibliometric analysis via VOSviewer, 956 high-quality studies were synthesized to map global knowledge and to expose the paucity of integrated SMP–CWM studies in developing …

Go to article

Sound Insulation Performance Of Sustainable Lc3 Mortars With Barite And Waste Rubber Aggregates, Begüm Söyek Abay, Leyla Tanaçan Feb 2026

Sound Insulation Performance Of Sustainable Lc3 Mortars With Barite And Waste Rubber Aggregates, Begüm Söyek Abay, Leyla Tanaçan

Journal of Sustainable Construction Materials and Technologies

This study investigates the potential of limestone calcined clay cement (LC3) as a sustainable binder for developing a single-layer composite material incorporating barite and rubber aggregates, hypothesized to achieve enhanced sound insulation performance compared to conventional multi-layered wall systems. Mortars were prepared using LC3 with 55% clinker, 30% metakaolin, 15% limestone, substituting 45% of cement clinker. Hybrid mixtures of barite and rubber aggregates (barite-to-rubber volume ratios of 2:1 and 1:2) were tested at aggregate-to-binder ratios of 2.0, 2.75, and 3.5 to evaluate their combined mass and damping effects on acoustic performance. Experiments were conducted to determine physical, mechanical, and acoustic …

Go to article

From Lime To Geopolymers: Emerging Trends And Advances In Sustainable Soil Stabilization, Favour Chukwuebuka Egwu, Amin Eisazadeh Feb 2026

From Lime To Geopolymers: Emerging Trends And Advances In Sustainable Soil Stabilization, Favour Chukwuebuka Egwu, Amin Eisazadeh

Journal of Sustainable Construction Materials and Technologies

Soil stabilization remains a critical challenge in geotechnical engineering, particularly for weak and expansive soils that compromise the safety and serviceability of infrastructure. Traditional stabilizers such as lime and cement have been widely applied; however, their limitations in terms of long-term durability, carbon footprint, and performance under aggressive environmental conditions necessitate alternative approaches. In recent years, geopolymer-based stabilizers derived from industrial by-products such as fly ash (FA), slag, and bottom ash (BA) have emerged as promising substitutes. This review critically examines the comparative performance of lime and geopolymer stabilization with respect to strength development, durability, compressibility, environmental impact, and economic …

Go to article

Investigating The Behavior Of Self-Compacting Concrete Containing Scms And Recycled Fine Aggregates, Sachin Tiwari, Mahakavi P Feb 2026

Investigating The Behavior Of Self-Compacting Concrete Containing Scms And Recycled Fine Aggregates, Sachin Tiwari, Mahakavi P

Journal of Sustainable Construction Materials and Technologies

This study addresses the unresolved gap in quantifying how recycled fine aggregates (RFA) and metakaolin (MK) interact synergistically in self-compacting concrete (SCC), a relationship that previous works have studied only in isolation or without mechanistic justification. Twenty-five SCC mixtures containing MK (0–25%) and RFA (0–100%) were evaluated to generate a unified understanding of fresh behaviour, strength development, pore refinement, interfacial transition zone (ITZ) characteristics, and sustainability indicators. Results show that RFA alone increases water demand and reduces strength, while MK compensates for these losses by densifying the matrix and improving ITZ bonding, as confirmed through SEM analysis. An optimum synergy …

Go to article

First Prev Next Last