Materials Science and Engineering Commons^™

Simulation Of Optical Properties Of Dielectric Layers From Visible To Near Infrared Spectral Range, Andrew Cochran, Cory Conkel

ONU Student Research Colloquium

Optical properties of dielectrics play a critical role in various applications including the design and manufacture of optical components & devices such as detectors, filters, imagers, lenses, optical coatings, photonic crystals, sensors and waveguides, and solar cells. Radiative properties of varying thicknesses of different dielectrics such as Aluminum Oxide (Al2O3), Silicon Dioxide (SiO2), Indium Tin Oxide (ITO), Magnesium Fluoride (MgF2) and Silicon Nitride (Si3N4) have been simulated and compared in the range of visible to near infrared by mathematical modelling using MATLAB simulations. The results of the evolution of the radiative properties, as a function of dielectric material thickness, on …

Polymers And Solvents Used In Membrane Fabrication: A Review Focusing On Sustainable Membrane Development, Xiaobo Dong, David Lu, Tequila A. L. Harris, Isabel C. Escobar

Chemical and Materials Engineering Faculty Publications

(1) Different methods have been applied to fabricate polymeric membranes with non-solvent induced phase separation (NIPS) being one of the mostly widely used. In NIPS, a solvent or solvent blend is required to dissolve a polymer or polymer blend. N-methyl-2-pyrrolidone (NMP), dimethylacetamide (DMAc), dimethylformamide (DMF) and other petroleum-derived solvents are commonly used to dissolve some petroleum-based polymers. However, these components may have negative impacts on the environment and human health. Therefore, using greener and less toxic components is of great interest for increasing membrane fabrication sustainability. The chemical structure of membranes is not affected by the use of different solvents, …

An Alternative Approach To Nucleic Acid Memory, George D. Dickinson, Golam Md Mortuza, William Clay, Luca Piantanida, Christopher M. Green, Chad Watson, Eric J. Hayden, Tim Andersen, Wan Kuang, Elton Graugnard, Reza Zadegan, William L. Hughes

Materials Science and Engineering Faculty Publications and Presentations

DNA is a compelling alternative to non-volatile information storage technologies due to its information density, stability, and energy efficiency. Previous studies have used artificially synthesized DNA to store data and automated next-generation sequencing to read it back. Here, we report digital Nucleic Acid Memory (dNAM) for applications that require a limited amount of data to have high information density, redundancy, and copy number. In dNAM, data is encoded by selecting combinations of single-stranded DNA with (1) or without (0) docking-site domains. When self-assembled with scaffold DNA, staple strands form DNA origami breadboards. Information encoded into the breadboards is read by …

Funtionalization Of Morphologically Different Nanoclays For Enhanced Mechanical Properties, Malachi Kent

Honors College Theses

Nanoclays are microscopic clays that are comprised of layered nanoparticle aluminosilicates that are naturally arranged in several morphologies. Halloysite nanotubes (HNT) are hollow, double-layered tubes, bentonite (BNT) clays are trapezoidal platelets, and nanosilica or silica dioxide (SiO₂) are spherical. These nanoclays were chosen for sustainable purposes as they are naturally derived and for economical purposes because of their cheap commercial availability. In this study, the nanoclays are functionalized with an epoxy organosilane group through reflux conditions at 120 °C for 24 hours. The pristine and functionalized nanoclays were extensively characterized with infrared radiation (IR) spectroscopy, scanning electron microscope …

Growth And Characterization Of Molecular Ferroelectric Thin Films, Yifan Yuan

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

Compared with inorganic ferroelectrics, organic ferroelectrics have advantages of low cost and low toxicity, are in increasing demand in capacitors, piezoelectric, and memory devices to reduce the environmental load. This work focuses on two types of organic molecular ferroelectric materials, croconic acid (CA) and 2-methylbenzimidazole (MBI). The work here introduces several origins of ferroelectricity in typical organics and their switching mechanism. We then investigated the nucleation, growth, and ferroelectric measurements of CA thin films. We explored the effect of substrate temperature and an external electric field on the nucleation and growth processes. The results can be used to improve the …

Fundamental Dislocation Solutions For Infinite And Semi-Infinite Media, Luo Li Mr

Mechanical Engineering ETDs

Much research has gone into determining stress fields of dislocation, as the understanding of dislocations is fundamental to understanding metal or crystal plasticity. In this thesis, the stress field of a rectangular dislocation loop in an infinite isotropic solid is developed for a Volterra-type dislocation with three non-zero Burgers vector components. Also, the stress and strain fields of a rectangular dislocation loop in an isotropic solid, which is a semi-infinite medium, are obtained here for a Volterra-type dislocation. Moreover, analytical and numerical verifications of the developed stress/strain fields are performed. This is done by ensuring the satisfaction of the equilibrium …

Open Source 3d-Printable Planetary Roller Screw For Food Processing Applications, Marcello C. Guadagno, Jacob M. Loss, Joshua M. Pearce

Michigan Tech Publications, Part 1

Historically, open source agriculture (OSA) was based on grassroots technology generally manufactured by hand tools or with manual machining. The rise of distributed digital manufacturing provides an opportunity for much more rapid lateral scaling of open source appropriate technologies for agriculture. However, the most mature distributed manufacturing area is plastic, which has limited use for many OSA applications. To overcome this limitation with design, this study reports on of a completely 3D-printable planetary roller screw linear actuator. The device is designed as a parametric script-based computer aided design (CAD) package to allow for the easy adaption for a number of …

Sulfate Optimization In The Cement-Slag Blended System Based On Calorimetry And Strength Studies, Mustafa Fincan

USF Tampa Graduate Theses and Dissertations

Optimization of sulfur trioxide (SO³) content is typically conducted for plain cements (OPC-based) paste or mortar systems using compressive strength testing and isothermal calorimetry for quality control. The objective of these procedures is to ensure adequate strength and set properties by controlling the time of occurrence of the aluminate peak by adjusting the SO³ content by incremental addition of sulfate in the form of hemihydrate at three or more levels, at the same time attempting to maximize either strength or heat of hydration at 1 and 3 days. The inclusion of supplementary cementitious materials such as blast …

Experiment On Activated Carbon Manufactured From Waste Coffee Grounds On The Compressive Strength Of Cement Mortars, Sukjoon Na, Sanghoon Lee, Sungmin Youn

All Engineering Faculty Research

In this paper, we performed an experiment with activated carbon manufactured from waste coffee grounds on the compressive strength of normal cement mortars. The activated carbon reinforcement was manufactured from waste coffee grounds, and the collected coffee grounds were then transformed into activated carbon granules through the physical activation process. The activated carbon/cement composites were prepared by mixing cement with activated carbon granules with the weight fractions of 0.5%, 1%, 1.5%, 5%, and 10% cement. The experimental results show that adding activated carbon up to 1.5 wt% increased the early strength of cement mortars. Furthermore, we found that the composites …

Actuating A Magnetic Shape Memory Element Locally With A Set Of Coils, Andrew Armstrong, Peter Müllner

Materials Science and Engineering Faculty Publications and Presentations

The local actuation of a magnetic shape memory (MSM) element as used in an MSM micropump is considered. This paper presents the difference between an electromagnetic driver and a driver that uses a rotating permanent magnet. For the magnetic field energy of the permanent magnetic drive, the element takes in a significant stray field. In a particular case, energy reduction was 12.7 mJ. For an electromagnetic drive with an identical size of the MSM element, the total magnetic field energy created by the system was 2.28 mJ. Attempts to experimentally nucleate twins in an MSM element by energizing an electromagnetic …

A Foray Into Laboratory Scale Soil Incubations With Corn Stover And High Lignin Fermentation Byproduct, Michelle Wang

ENGS 88 Honors Thesis (AB Students)

As the production of biofuels increases to meet the demands of a growing low carbon economy, questions of sustainability surrounding its feedstock and waste streams have become increasingly relevant. In the biofuel production process, crop residues like corn stover are harvested from the field and converted to biofuels leaving generating a residue called high lignin fermentation byproduct (HLFB). From extensive process modelling in the literature, it is suggested that HLFB should be either combusted to fuel auxiliary conversion processes or returned to the soil in place of the crop residues that were harvested. Currently, there is little literature testing the …

Securing Pint Glasses On Serving Trays With Magnetic Attachments, Jayden Commendatore

Senior Theses

It is extremely common for servers in the restaurant industry to have pint glasses slip off their serving tray, wasting both time and money for the restaurant. I have designed a sleeve attachment that will clip on to the bottom of a pint glass. The metal sleeve attachment will be attracted to a magnet placed into the serving tray. This increases the normal force of the pint glass, resulting in an increase in the friction force between the tray and sleeve attachment, and helping secure the glass to the tray. In order to optimize the design, the value of the …

Relationship Between Thermal Conductivity And Free Electrons In Metal, Yansong Liu

Senior Theses

An experiment was designed and conducted to explore the relationship between thermal conductivity with free electrons in metal. In the experiment, copper, iron, aluminum, and titanium rods with close diameters were used to carry out the experiment. Each rod was heated up by a heat unit at one end while cooled on the other end with a heat sink to maintain a steady state. DC current was applied to rods in the direction along, as well as against, the heat flow. Thermal conductivities were measured in these two situations for each rod. Results showed electrons do dominate thermal flow inside …

Statistical Study Of The Effect Of Implementing An Airveyor System On The Warpage Of Injection Molded Closures, Charles Wesley Bozarth

Masters Theses & Specialist Projects

Berry Global in Bowling Green, Kentucky produces predominantly polypropylene container closures. One variant, the 83mm lined jar closure, is produced by first being injection molded, placed in work-in-progress (WIP) hold for 24 hours to cool, and then finished through the auxiliary liner operation into a final product. While this process is an effective method to produce a quality large-diameter closure and allows the polypropylene adequate time to cool without warping out of shape, the 24-hour WIP time and the manpower needed to accomplish this can negatively impact several business metrics as well as employee safety.

The purpose of this thesis …

Damage Evolution And High-Rate Response Of High-Strength Concrete Under Triaxial Loading, Brett Williams

Mechanical Engineering Research Theses and Dissertations

The research presented in this study focuses on understanding fundamental mechanisms that drive material response under dynamic loading conditions. The objectives of the research were to: (1) to understand damage initiation and propagation in the bulk geomaterial under a variety of loading conditions and (2) to systematically investigate the strain rate effects on the triaxial compressive response of cementitious materials through the development of an innovative, first of its kind large-diameter (50 mm) triaxial Kolsky bar system.

The triaxial compressive response of high-strength concrete is needed to understand pressure-dependent material behavior, which is important for modeling extreme loading events. However, …

Improving The Intellectual And Social Development Of Children With Autism: Design Of A Training Center For Autism, Hasti Jalalian

Makara Journal of Technology

Research on the relationship between the role of architecture and the psychology of children with autism, which indicates that appropriate environments for these children can have a significant effect on their healthcare process, has been recently conducted. However, statistics show that autism spectrum disorders are pervasive, and its extent in Iran has been increasing. Moreover, centers that are specifically designed for children with autism are limited, and paradigms are made without considering the mood of these children. Given the role of architecture in designing a suitable space for these children, an investigation that can identify the specific requirements of these …

Analysis Of The Interfacial Reaction Between Bulk Metallic Glass Coated Copper, Nickel, And Titanium With Lead-Free Solders, Andromeda Dwi Laksono, Yee-Wen Yen, Rifqi Aulia Tanjung, Teodoro A. Amatosa, Ruki Harwahyu

Makara Journal of Technology

Bulk metallic glass (BMG) has good mechanical strength, high hardness, wear resistance, and corrosion resistance with promising application in various industries. However, for the industrial production of BMG, the main issue is how to overcome limitations of joining with other materials. The present study focuses on solder processing at low operating temperature to avoid exceeding the recrystallization temperature. A feasible joining process for BMG was developed using lead-free solders. The BMG surface is pre-plated with copper, nickel, or titanium as a wetting layer. The reaction temperature is set between the glass transition temperature of BMG and the melting point of …

Design Of Ac Microgrid Topology With Photovoltaic Uncertainties In A Rural Village, Vannak Vai

Makara Journal of Technology

Energy needs are increasing day by day, especially for developing countries, due to population growth and changing lifestyles. A suitable microgrid topology with renewable energy integration is considered to fulfill the people and society’s needs. This paper focuses on the design of AC microgrid topology for a nonelectrified village with the integration of PV uncertainties in both sitting and sizing. The development of an optimal algorithm based on the conductor use minimization and unbalanced load improvement is proposed. The shortest path is proposed to search for the minimum conductor use. Then, the algorithm for improving the unbalanced load with two …

Mean-Shift Object Tracking Algorithm With Systematic Sampling Technique, Yoanes Bandung, Aris Ardiansyah

Makara Journal of Technology

Mean shift is a fast object tracking algorithm that only considers pixels in an object area, hence its relatively small computational load. This algorithm is suitable for use in real-time conditions in terms of execution time. The use of histograms causes this algorithm to be relatively resistant to rotation and changes in object size. However, its resistance to lighting changes is not optimal. This study aims to improve the performance of the algorithm under lighting changes and reduce its processing time. The proposed technique involves the use of sampling techniques to reduce the number of iterations, optimization of candidate search …

Analysis Of Correlation And Mapping Of Chlorophyll-A Concentrations And Sea Surface Temperatures In Coastal Areas Based On Terra Modis Satellite Image Data, Hendrata Wibisana, Bangun Muljo Sukotjo, Umboro Lasminto

Makara Journal of Technology

Ecosystems in aquatic environments are distinct from ecosystems on land. Changes that occur in ecosystems in aquatic environments affect the lives of biota in these waters, including the fish used as a food source in fishing communities in coastal areas. This study aims to determine the role of remote sensing in mapping and analyzing the relationship between the parameters of sea surface temperature and chlorophyll-a concentrations on the coast. The correlation of sea surface temperature with chlorophyll-a concentrations is modeled via linear regression. An analysis of variance test is performed to establish the suitability of the temperature data for the …

Adsorption And Surface Diffusion Of Metals On Α-Al2O3 For Advanced Manufacturing Applications, Austin Biaggne, Gregory Noble, Lan Li

Materials Science and Engineering Faculty Publications and Presentations

The adsorption and diffusion of Mo and Nb adatoms on the α-Al₂O₃ (0001) surface were explored using density functional theory-based methods. Adsorption energies of Mo and Nb adatoms at minima sites on the surface were determined. Mo and Nb adatoms prefer to adsorb to the same locations on the surface, and larger adsorption energies calculated for Nb compared to Mo indicate that Nb adatom-surface interactions are stronger than Mo. Using minima adsorption sites as initial and final locations for surface diffusion, energy barriers for diffusion were calculated using the nudged elastic band method. Overall, Mo and …

In-Service Performance Evaluation And Installation Recommendations For Cable Median Barriers On Non-Continuously Shielded, Divided-Median Kansas Freeways, Nathan Dowler

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

The Kansas Department of Transportation (KDOT) installed 7.95 miles of cable median barrier (CMB) along K-10, K-96, and US-75 freeways in 2011 and 2012. In January 2020, KDOT funded a study to determine the in-service performance of its CMBs. In addition, KDOT sought to determine if it was cost-effective to modify guidelines for installing median barriers, which were based on annual daily traffic and median width.

Researchers reviewed every crash within approximately ¼ mile of a CMB installation and extracted crashes which involved a CMB impact. Researchers analyzed the critical details of each CMB crash, with particular emphasis on penetrations, …

Experimental Study Of Hollow-Core Slab Containing Waste Pet Bottles, Mulia Orientilize, Josia Irwan Rastandi, R. M. Dimas Aries C., Marsha Niken P., Krisna Adi S.S., Abimantrana Abimantrana

Makara Journal of Technology

This study investigated the utilization of plastic-waste concrete as an effort to reduce urban waste problems. The waste plastic bottles were utilized to form the hollows of the hollow-core slabs (HCSs). The bottles were made of polyethylene terephthalate (PET). As a part of green research to reuse waste material, shredded PET was also added to the concrete mixture to improve the HCS strength. The cast-in-site HCS could be constructed without any difficulties. Three parameters were investigated: the effects of void content, shredded PET content, and steel-fiber (SF) content on the HCS ultimate bending capacity (Mu). Fifteen specimens were tested under …

Signatures Of Vibrational And Electronic Quantum Beats In Femtosecond Coherence Spectra, Paul C. Arpin, Daniel B. Turner

Materials Science and Engineering Faculty Publications and Presentations

Femtosecond laser pulses can produce oscillatory signals in transient-absorption spectroscopy measurements. The quantum beats are often studied using femtosecond coherence spectra (FCS), the Fourier domain amplitude, and phase profiles at individual oscillation frequencies. In principle, one can identify the mechanism that gives rise to each quantum-beat signal by comparing its measured FCS to those arising from microscopic models. To date, however, most measured FCS deviate from the ubiquitous harmonic oscillator model. Here, we expand the inventory of models to which the measured spectra can be compared. We develop quantum-mechanical models of the fundamental, overtone, and combination-band FCS arising from harmonic …

The Role Of Rejuvenators In Embedded Damage Healing For Asphalt Pavement, Shi Xu, Xueyan Liu, Amir Tabakovic, P Lin, Y Zhang, S Nahar, B J. Lommerts, Erik Schlangen

Articles

Rejuvenator encapsulation technique showed great potential for extrinsic asphalt pavement damage healing. Once the capsules are embedded within asphalt pavement, the healing is activated on-demand via progressing microcrack. When the microcrack encounters the capsule, the fracture energy at the tip opens the capsule and releases the rejuvenator. Then the released rejuvenator wets the crack surfaces, diffuses into and softens the aged bitumen, allowing two broken edges to come in the contact, preventing further asphalt pavement deterioration. The quality and speed of the damage repair process strongly depend on the quality of rejuvenator, thus it is important to choose a proper …

An Injectable Thermosensitive Hydrogel Potentially Used For Wound Dressing With Self-Adhesive Properties, Yunxiu Qiu

McKelvey School of Engineering Graduate Student Theses & Dissertations

Wound healing is a complex process, and different kinds of materials are tried to achieve rapid healing. Among them, hydrogel is one of the best candidates for would dressing due to its distinctive properties, such as high biocompatibility, flexibility, and sensitivity to physiological environments. Injectable hydrogels can be facilely delivered in vivo without massive impairment to the body, as no surgical incision is needed for hydrogel embedment. This is highly consistent with the need of minimal invasion on human body. Multiple stimuli could be applied to achieve its injectability, including pH, temperature, light, ions in body fluids. Thermosensitive hydrogel is …

Numerical Study Of A Buckling Restrained Brace (Brb) In Steel Structures And Comparison With A Convergent Ordinary Brace (Ocb) Under Static And Dynamic Loading, Fatemeh Habibpour

Makara Journal of Technology

Bulk metallic glass (BMG) has good mechanical strength, high hardness, wear resistance, and corrosion resistance with promising application in various industries. However, for the industrial production of BMG, the main issue is how to overcome limitations of joining with other materials. The present study focuses on solder processing at low operating temperature to avoid exceeding the recrystallization temperature. A feasible joining process for BMG was developed using lead-free solders. The BMG surface is pre-plated with copper, nickel, or titanium as a wetting layer. The reaction temperature is set between the glass transition temperature of BMG and the melting point of …

Authors From All Over The World Share Their Tech In Hardwarex To Battle Covid-19, Joshua M. Pearce

Michigan Tech Publications, Part 1

No abstract provided.

Development Of Novel Phase Change Material (Pcm)-Based Nanocomposites Using Emerging Nanomaterials For Energy Storage Applications, Navid Aslfattahi

Student Works (2020-2029)

Energy storage is a global critical issue and important area of research as most of the renewable sources of energy are intermittent. In this thesis, novel nanomaterials including recently emerged two-dimensional nanomaterial MXene (Ti3C2), hybrid graphene-silver (Gr-Si), hexagonal boron nitride (hBN), magnesium oxide (MgO) and alumina (Al2O3) nanoparticles are used as additives into various types of organic/inorganic phase change materials (PCMs) for formulation of promising PCM-based nanocomposites to improve their thermo-physical properties. This research work focuses on synthesis, preparation, characterization, thermal storage properties and thermal stability characteristic of new class of nanocomposites induced with advanced/emerging nanomaterials. Novel two_dimensional MXene (Ti3C2) …

Applied Evanescent Wave On Zinc Oxide Nanorods Coated Glass Surface For Sensing Applications, Mohd Hafiz Jali

Student Works (2020-2029)

A simple and workable optical fiber sensor was successfully proposed and demonstrated by integrating the microfiber and the glass surface coated with Zinc Oxide (ZnO) nanorods. It exploited the distinctive features of the large evanescent wave of the microfiber and surface absorption capability of the ZnO nanomaterials coated glass surface to couple with the surrounding analyte. An experimental validation was performed to optimize and verify the sensing performance of the proposed structure. ZnO nanorod growth time of 12-hours and microfiber waist diameter of 6 µm provide optimum sensing results towards the changes of humidity concentration level. The diameter of silica …