Materials Science and Engineering Commons^™

Ball-On-Ring Test Validation For Equibiaxial Flexural Strength Testing Of Engineered Ceramics, Adrianna E. Lupercio, Ehsan Moshkelgosha, Riley C. Winters, Cayden Doyle, Mahmood Mamivand, Andrew T. Nelson, Brian J. Jaques

Materials Science and Engineering Faculty Publications and Presentations

The validation of a ball-on-ring, equibiaxial flexural strength method to obtain the transverse rupture strength (TRS) of right cylindrical ceramic specimens was performed in this study. Validation of the test method was achieved using commercially available engineered high purity alumina disks and finite element (FE) model analysis. The validated fixture was then used to obtain the TRS and Weibull statistical analysis of MgO-partially stabilized zirconia (MSZ) and Y₂O₃-partially stabilized zirconia (YSZ) ceramic disks. TRS data for alumina, MSZ, and YSZ agreed with the TRS values reported in the literature. A statistically relevant number of samples (N …

Atomic Layer Deposition Of Sodium Fluoride Thin Films, Sara Kuraitis, Donghyeon Kang, Anil U. Mane, Hua Zhou, Jake Soares, Jeffrey W. Elam, Elton Graugnard

Materials Science and Engineering Faculty Publications and Presentations

The need for advanced energy conversion and storage devices remains a critical challenge amid the growing worldwide demand for renewable energy. Metal fluoride thin films are of great interest for applications in lithium-ion and emerging rechargeable battery technologies, particularly for enhancing the stability of the electrode-electrolyte interface and thereby extending battery cyclability and lifetime. Reported within, sodium fluoride (NaF) thin films were synthesized via atomic layer deposition (ALD). NaF growth experiments were carried out at reactor temperatures between 175 and 250 °C using sodium tert-butoxide and HF-pyridine solution. The optimal deposition temperature range was 175–200 °C, and the resulting …

Development Of Biomaterials For Drug Delivery, Raquel De Castro

Graduate Theses and Dissertations

Drug delivery systems (DDS) have highly evolved in the last decades with the development of hydrogels and nanoparticles. However, high systemic uptake, side effects, low bioavailability, and encapsulation efficiency continue to be a major hurdle faced by such DDSs.

Nanoparticles and hydrogels can be specifically designed for targeted DDSs to mitigate some of the problems. This dissertation aimed to design two DDSs for ocular drug delivery and one for cancer treatment. The first project sought to develop chitosan nanoparticles (Cs-NP) using PEGDA as a copolymer to encapsulate gentamicin (GtS) for ocular drug delivery. Cs-NPs contain positive charges that can interact …

Peptoid-Functionalized Gold Nanoparticles For Zika Virus Envelope Protein Detection, Meagan Olsen

Chemical Engineering Undergraduate Honors Theses

Detection and identification of viral pathogens is essential in providing effective and rapid medical treatment. Well-established detection methods can be expensive, slow, and sometimes unable to provide the needed sensitivity and specificity. The Zika virus is one clinically relevant pathogen that cannot be easily identified due to cross-reactivity with other viruses from the same family. Electrochemical sensors enhanced with peptoid-functionalized gold nanoparticles (AuNPs) are an alternative to traditional techniques that offers rapid, accurate, label-free pathogen detection for point-of-care diagnostics. To this end, a peptoid capable of binding to the Zika virus envelope protein was developed and its binding affinity for …

Study Of Static And Dynamical Properties Of Complex Antiferroelectrics Materials, Kinnary Yogeshbhai Patel

Graduate Theses and Dissertations

The aim of this dissertation is the investigation of the static and dynamical properties of the complex antiferroelectric materials using Effective Hamiltonian method and First principles calculations. In chapter 3, a novel elemental interatomic coupling in perovskite materials which bilinearly couples the antiferroelectric displacements of cations with the rotations of the oxygen octahedra. This new coupling explains a very complex crystal structure of prototypical antiferroelectric PbZrO3. My explanation provides a unified description of many other complex antipolar crystal structures in variety of perovskite materials, including the occurrence of incommensurate phases in some of them. In chapter 4, results and analysis …

Steam Oxidation Of Ytterbium Disilicate Environmental Barrier Coatings With And Without A Silicon Bond Coat, Ken A. Kane, Eugenio Garcia, Sharon Uwanyuze, Michael Lance, Kinga A. Unocic, Sanjay Sampath, Bruce A. Pint

Materials Science and Engineering Faculty Research & Creative Works

The current generation of multilayer Si/Yb₂Si₂O₇ environmental barrier coatings (EBCs) are temperature limited by the melting point of Si, 1414°C. To investigate higher temperature EBCs, the cyclic steam oxidation of EBCs comprised of a single layer of ytterbium disilicate (YbDS) was compared to multilayered Si/YbDS EBCs, both deposited on SiC substrates using atmospheric plasma spray. After 500 1-h cycles at 1300°C in 90 vol%H₂O-10 vol%air with a gas velocity of 1.5 cm/s, both multilayer Si/YbDS and single layer YbDS grew thinner silica scales than bare SiC, with the single layer YbDS forming the …

A Hyperelastic Porous Media Framework For Ionic Polymer-Metal Composites And Characterization Of Transduction Phenomena Via Dimensional Analysis And Nonlinear Regression, Zakai J. Olsen

UNLV Theses, Dissertations, Professional Papers, and Capstones

Ionic polymer-metal composites (IPMC) are smart materials that exhibit large deformation in response to small applied voltages, and conversely generate detectable electrical signals in response to mechanical deformations. The study of IPMC materials is a rich field of research, and an interesting intersection of material science, electrochemistry, continuum mechanics, and thermodynamics. Due to their electromechanical and mechanoelectrical transduction capabilities, IPMCs find many applications in robotics, soft robotics, artificial muscles, and biomimetics. This study aims to investigate the dominating physical phenomena that underly the actuation and sensing behavior of IPMC materials. This analysis is made possible by developing a new, hyperelastic …

Characterization Of Protein Aggregation Using A Solid-State Nanopore Device, Mitu Chandra Acharjee

Graduate Theses and Dissertations

Protein aggregation has been linked to many chronic and devastating neurodegenerative human diseases and is also strongly associated with aging. In the case of neurodegenerative diseases, α, β tubulins and tau proteins dissociate in a neuron cell and aggregate both intra and extra-cellularly. Tau and tubulin aggregations were found as one of the major causes of many neurodegenerative diseases, such as Parkinson’s, Picks, Alzheimer’s, Huntington, and Prion. Finding the state and mechanism of protein aggregation is significant. In this work, tau and tubulin aggregations were detected in ionic solutions using the solid-state nanopore technique. Besides tau and tubulin, aggregations of …

Peptoid-Based Microsphere Coatings For Biomaterial Applications, Jesse Leland Roberts

Graduate Theses and Dissertations

Peptoids are peptidomimetic oligomers that predominantly harness similarities to peptides for biomimetic functionality. The incorporation of chiral, aromatic side chains in the peptoid sequence allows for the formation of distinct secondary structures and self-assembly into supramolecular assemblies, including microspheres. Peptoid microspheres can be coated onto substrates for potential use in biosensor technologies, tissue engineering platforms, and drug-delivery systems. They have the potential for use in biomedical applications due to their resistance to proteolytic degradation and low immunogenicity. This dissertation focuses on the physical characteristics and robustness of the peptoid microsphere coatings in various physiological conditions, along with their ability to …

Si-Based Germanium Tin Photodetectors For Infrared Imaging And High-Speed Detection, Huong Tran

Graduate Theses and Dissertations

Infrared (IR) radiation spans the wavelengths of the windows: (1) near-IR region ranging from 0.8 to 1.0 μm, (2) shortwave IR (SWIR) ranging from 1.0 to 3.0 μm, (3) mid-wave IR (MWIR) region covering from 3.0 to 5.0 μm, (4) longwave IR (LWIR) spanning from 8.0 to 12.0 μm, and (5) very longwave IR extending beyond 12.0 μm. The MWIR and LWIR regions are important for night vision in the military, and since the atmosphere does not absorb at these wavelengths, they are also used for free-space communications and astronomy. Automotive and defect detection in the food industry and electronic …

Oxone® Mediated Tempo-Oxidized Cellulose Nanomaterials: Material Characterization, Ultrafiltration Membrane Separations, And Thin Film Composite Gas Transport Analysis, John Phillips Moore

Graduate Theses and Dissertations

Cellulose nanomaterials (CNMs) are derived from plant matter and are comprised of nanoscopic cellulose crystals and fibers. They have a diverse set of applications, from cosmetics to oil recovery. This study focuses on the properties of Oxone® mediated TEMPO-oxidized cellulose nanomaterials (OTO-CNMs) and their use in controlling the transport properties of polymeric substrates. Synthesis and characterization of cellulosic nanoparticles have resulted in the creation of OTO-CNMs with properties that increase hydrophilicity. With added hydrophilicity, OTO-CNMs possess lower fouling propensity, making them ideal membrane additive for transport limited separations such as hemodialysis.

To utilize the material and unique properties thereof, this …

Effects Of Static Mixer Geometry On Polyurethane Properties, Christian R. Dixon

Honors Theses

The field of additive manufacturing has gained significant academic interest in the past few decades with a recently developed type of three-dimensional (3D) printing. Reactive extrusion additive manufacturing combines precursor materials within a static mixer (SM) head, where polymerization begins before deposition. Variable static mixer geometries currently exist, but the relationship between mixer geometry and post-polymerization mechanical properties is undefined. To elucidate this relationship, a series of experiments with identical chemistry was performed using a high shear SM, a low shear SM, and a comparative batch reaction. While higher shear mixing trends with faster polymerization for step-growth polymerizations, consistent precursor …

U.S. Potential Of Sustainable Backyard Distributed Animal And Plant Protein Production During And After Pandemics, Theresa K. Meyer, Alexis Pascaris, David Denkenberger, Joshua M. Pearce

Michigan Tech Publications, Part 1

To safeguard against meat supply shortages during pandemics or other catastrophes, this study analyzed the potential to provide the average household’s entire protein consumption using either soybean production or distributed meat production at the household level in the U.S. with: (1) pasture-fed rabbits, (2) pellet and hay-fed rabbits, or (3) pellet-fed chickens. Only using the average backyard resources, soybean cultivation can provide 80-160% of household protein and 0- 50% of a household’s protein needs can be provided by pasture-fed rabbits using only the yard grass as feed. If external supplementation of feed is available, raising 52 chickens while also harvesting …

Husky Hand: A Low-Cost Electro-Mechanical Prosthetic Arm For The Underprivileged, Adam Robert

Thinking Matters Symposium

A continuation of a low-cost prosthetic upper limb prototype design which was investigated in EGN 301. The prosthetic is specifically designed for the needs and requirements of under privileged individuals in the Dominican Republic with upper limb amputations. The project focuses on the creation of an open-source computer aided prosthetic hand/arm model. The design allows consumer-grade fused filament fabrication (FFF) 3-D printers to be used. The improved design allows for the integration of the PQ-12 linear actuator for grasp and finger control. This simplifies the assembly, while, also reducing the size and mass of the whole unit. Producing a low-cost …

Finite Element Analysis Of Impact Resistant Composites Inspired By Peacock Mantis Shrimp, Nandati Shrestha

Thinking Matters Symposium

The fist-like club of the peacock mantis shrimp, a 5-inch marine crustacean, can strike its prey with speed faster than a .22-caliber bullet with an impact force more than 1,000 times its own weight. Although these creatures punch so fast that it even boils the water, they don’t take any damage. This incredible insusceptibility is due to the arrangement of mineralized fiber layers in which each fibrous layer is laid at a slightly rotated angle to form a helicoidal structure that acts as a shock absorber for the club. The goal is to perform a finite element analysis to investigate …

Pd-Based Electrocatalysts For Oxygen Reduction And Ethanol Oxidation Reactions: Some Recent Insights Into Structures And Mechanisms, Zhi-Peng Wu, Chuan-Jian Zhong

Journal of Electrochemistry

The development of efficient electrocatalysts for applications in fuel cells, including proton-exchange membrane fuel cell (PEMFC) and direct ethanol fuel cell (DEFC), has attracted extensive research attention in recent years. Oxygen reduction reaction and ethanol oxidation reaction are two of the key reactions where the design of active, stable and low-cost electrocatalysts is critical for the mass commercializations of PEMFCs and DEFCs. This challenge stems largely from the limited understanding of the catalyst structures and reaction mechanisms. Progress has been made in investigations of electrocatalysts derived from Pd-based alloy nanomaterials both experimentally and computationally. We highlight herein some of the …

Electrochemical Surface-Enhanced Raman Spectroscopic Studies On Nickel Ultramicroelectrode, Li-Wen Wu, Wei Wang, Yi-Fan Huang

Journal of Electrochemistry

Nickel (Ni) electrodes are widely used in electrochemical researches. Understanding electrochemical processes on Ni electrodes through in-situ characterization of adsorbed species on their surfaces is helpful for rational optimization and application of Ni electrochemistry. Microelectrochemical surface-enhanced Raman spectroscopy (μEC-SERS) combines the mass transfer feature of ultramicroelectrode with high-sensitivity characterizations of molecular structures, which is a powerful method for studying Ni electrochemistry on polarization and non-equilibrium conditions. The key point of performing μEC-SERS is to make a SERS-active Ni ultramicroelectrode.
Here, we demonstrate a method of preparing a SERS-active Ni ultramicroelectrode through electrochemical deposition of several atomic layers of …

Theoretical Studies Of Metal-N-C For Oxygen Reduction And Hydrogen Evolution Reactions In Acid And Alkaline Solutions, Xue-Ping Qin, Shang-Qian Zhu, Lu-Lu Zhang, Shu-Hui Sun, Min-Hua Shao

Journal of Electrochemistry

Single atom catalysts (SAC) have been regarded as the promising alternatives to platinum group metals due to their low costs and potentially high catalytic activities in various electrocatalytic reactions. The atomic mechanism understanding of activity discrepancy among different metal and nitrogen co-doped carbon-based catalysts is still lacking. Here, non-precious metal and nitrogen co-doped carbons (Me-N-C, Me = Fe and Co) as the model catalysts are investigated by combining experimental and theoretical studies to explore the catalytic activities and corresponding reaction mechanisms toward oxygen reduction reaction (ORR) and hydrogen evolution reaction (HER) at universal pHs. Atomic theoretical simulations suggest that Fe-N-C …

Electrochemiluminescence Imaging Hydrogen Evolution Reaction On Single Platinum Nanoparticles Using A Bipolar Nanoelectrode Array, Xiang Qin, Zhong-Qiu Li, Jian-Bin Pan, Jian Li, Kang Wang, Xing-Hua Xia

Journal of Electrochemistry

A high-density (5.7 × 10⁸ cm^-2) nanoelectrode array with the electrode diameter of 200 nm and the interelectrode distance of 450 nm were fabricated. The nanoelectrode array consisted of gold nanowires embedded in a porous anodic aluminum oxide (AAO) matrix, having regular nanoelectrode distribution and highly uniform nanoelectrode size. The gold nanoelectrode array was used as a closed bipolar nanoelectrode array combined with electrochemiluminescence (ECL) method to map the electrocatalytic activity of platinum nanoparticles toward hydrogen evolution reaction (HER) by modifying the catalysts on single nanoelectrodes. Results show that HER on single bipolar nanoelectrodes could be imaged …

Preparation And Characterization Of "Water-In-Salt" Polymer Electrolyte For Lithium-Ion Batteries, Xu Hou, Xin He, Jie Li

Journal of Electrochemistry

Since the development of wearable and flexible electronic products, the demand of flexible energy storage devices such as batteries and super capacitors is in urgent. To enhance the safety and cycling stability for flexible lithium-ion batteries, “water-in-salt” polymer electrolyte was prepared by introducing 21 mol·kg^-1 LiTFSI electrolyte into cross-linked polyacrylamide (PAM) after freeze-drying. A great amount of holes with the size range of 10 ~ 20 μm can be found on the surface and in the bulk of polyacrylamide, which is benefited from the freeze-drying process and acts as a great support for the electrolyte uptake. The “water-in-salt” polymer …

Oxygen-Exposure Induced Rapid Oxidation Of Spiro-Ometad In Cspbibr2 Perovskite Solar Cells, Wei-Guo Wang, Tian Bai, Gao-Fei Xue, Mei-Dan Ye

Journal of Electrochemistry

2,2′,7,7′-tetrakis(N,N-di-p-methoxyphenyl-amine)-9,9′-spirobifluorene (Spiro-OMeTAD) is the most widely used hole transport material in perovskite solar cells (PSCs). However, its oxidation in the air takes a long time and results in the attack of perovskite by water. In this regard, we performed the oxidation process of Spiro-OMeTAD in oxygen, where perovskite can be protected from water, guaranteeing the integrity of perovskite. It was demonstrated that the champion Spiro-OMeTAD based CsPbIBr₂ PSCs after oxygen oxidation achieved a 7.19% power conversion efficiency (PCE), showing a higher PCE than 6.29% of the champion device oxidized in air. A series of electrochemical characterization methods were applied …

Application Of Atomically Precise Metal Nanoclusters In Electrocatalysis, Zhi-Hua Zhuang, Wei Chen

Journal of Electrochemistry

Metal nanoclusters (M NCs) consist of only several to a few hundred of metal atoms and possess core sizes less than 2 nm. Owing to the quantum size effect, the electronic states of M NCs evolve to discrete levels similar to the molecule energy gaps, other than a continuous density of states to produce plasmon characteristic of bulk metal nanoparticles (M NPs). In comparison with the conventional M NPs, M NCs exhibit dramatically unique electronic and optical properties, such as molecule-like energy gaps, strong photoluminescence and high catalytic properties, which make them promising for potential application in numerous fields, such …

Lithium Storage Performance Of Hard Carbons Anode Materials Prepared By Different Precursors, Zhen-Lang Liang, Yao Yang, Hao Li, Li-Ying Liu, Zhi-Cong Shi

Journal of Electrochemistry

Hard carbon is one of the most promising anode material for lithium ion batteries (LIBs) owing to its high stability, widespread availability, low-cost, and excellent performance. The electrochemical properties of hard carbon materials depend strongly on the type of precursors. It is, therefore, very important to choose an excellent hard carbon precursor. Polyacrylonitrile, petroleum pitch and peanut shells were used as raw materials to prepare different hard carbon anode materials for LIBs. These hard carbon anode materials were successfully synthesized in two steps. The selected precursor was firstly carbonized at 600℃ for 1 h in argon atmosphere using heating rate …

Detection And Aggregation Of Listeria Monocytogenes Using Polyclonal Antibody Gold-Coated Magnetic Nanoshells Surface-Enhanced Raman Spectroscopy Substrates, Robert T. Busch, Farzia Karim, Yvonne Sun, H. Christopher Fry, Yuzi Liu, Chenglong Zhao, Erick S. Vasquez

Chemical and Materials Engineering Faculty Publications

Magnetic nanoshells with tailored surface chemistry can enhance bacterial detection and separation technologies. This work demonstrated a simple technique to detect, capture, and aggregate bacteria with the aid of end-functionalized polyclonal antibody gold-coated magnetic nanoshells (pAb-Lis-AuMNs) as surface-enhanced Raman spectroscopy (SERS) probes. Listeria monocytogenes were used as the pathogenic bacteria and the pAb-Lis-AuMNs, 300 nm diameter, were used as probes allowing facile magnetic separation and aggregation. An optimized covalent bioconjugation procedure between the magnetic nanoshells and the polyclonal antibody was performed at pH six via a carbodiimide crosslinking reaction. Spectroscopic and morphological characterization techniques confirmed the fabrication of stable pAb-Lis-AuMNs. …

Features Of Chloridizing Roasting Of Almalyk Mining Metallurgical Combinate Wastes, Malokhat Atamuratova, Dildora Khakimboeva, Khasan Sharipov, Zuhra Kadirova, Tulkin Shakarov

CHEMISTRY AND CHEMICAL ENGINEERING

With the aim to develop a comprehensive technology for processing Almalyk Mining Metallurgical Combinate (AMMC) wastes, the influence of chloride additives on the copper and zinc chloride volatilization process is considered. The relationship between presence of the calcium, potassium and sodium chlorides chlorinating additive on the copper and zinc chlorides sublimation from the AGMK wastes at roasting temperatures up to 700-1000˚C was established.

Synthesis Of Superabsorbing Hydrogels Based On Starch Copolymers, Baxodir Kholnazarov, Khayit Turaev, Abdulakhat Jalilov

CHEMISTRY AND CHEMICAL ENGINEERING

The aim of this work is to synthesize highly swellable superabsorbent hydrogels based on starch copolymers. To achieve this goal, mineral-containing superabsorbent hydrogels based on starch, acrylamide, binder and initiator were synthesized. The optimal synthesis conditions were determined and studies were carried out on the influence of the molar ratios of the starting substances on the composition and physicochemical properties of the synthesized superabsorbent hydrogel. In the course of research, the optimum copolymerization temperature was 60 ° C, and the reaction time was 3 hours.

As a result of the study, a superabsorbent hydrogel based on starch, acrylamide and bentonite …

Synthesis Of Thiocol Oligomer Based On Sodium Tetrasulphide, Epichlorhydrine And Ammonium Phosphate, Bakhtiyor Normurodov, Khayit Turaev, Abdulakhat Jalilov, Sherzod Kasimov

CHEMISTRY AND CHEMICAL ENGINEERING

The purpose of this study is the synthesis and study of thiokol oligomer NEP-12 brand based on sodium tetrasulfide, epichlorohydrin and ammonium phosphate, which is intended for use as a main component of Thiokol sealant. To achieve this goal, a thiokol oligomer based on sodium tetrasulfide, epichlorohydrin, and ammonium phosphate was synthesized and investigated, and the optimal conditions for the synthesis of a thiokol oligomer were determined. Research has been carried out on the influence of the molar ratios of the starting substances on the composition and physicochemical properties of the synthesized thiocol oligomer. The optimum polycondensation temperature was taken …

Synthesis And Structure Of The Coordination Complex Of Copper Ion With Collagen, Dildorа Sadikova, Adham Rafikov, Oybek Tursunqulov, Dilnoza Soyibova

CHEMISTRY AND CHEMICAL ENGINEERING

The aim of this work is to synthesize, determine the composition and microstructure of complexes of copper (II) sulfate with collagen for use as a dye for textile material. Coordination complexes of copper (II) sulfate with collagen synthesized at different ratios of the initial substances by the interaction of solutions of different concentrations of copper sulfate and collagen of raw skin. With an increase in the salt content, the yield of the reaction product increases. With an excess of collagen, some of it does not bind into a complex and precipitates. With an excess of salt, almost the weight of …

Synthesis Of Sodium Ammonium Hydrophosphate And Sodium Dihydrophosphate Based On Extraction Phosphoric Acid From Central Kyzylkum Phosphorites, Kamola Arifdjanova, Kholtura Mirzakulov, Sherzod Khujamberdiev, Melikulova Gavkhar

CHEMISTRY AND CHEMICAL ENGINEERING

The aim of the research is the synthesis of sodium ammonium hydrogen phosphate and sodium dihydrogen phosphate based on purified extraction phosphoric acid.

The acid was purified from accompanying impurities by precipitation methods using sodium carbonate and metasilicate, washed burnt phosphoconcentrate, barium carbonate, acid neutralization with gaseous ammonia. Pre-neutralization of the purified solution of monoammonium phosphate with sodium carbonate to the ratio Na₂O:P₂O₅ = 0.44 and subsequent drying at a temperature of 50 °С allows to obtain sodium ammonium hydrogen phosphate tetrahydrate, and at 100 °С sodium dihydrogen phosphate monohydrate.

The individuality and purity of …

Physico-Chemical Properties And Structural Transformations In The Synthesis Of Boroalumosilicate Glass-Crystal Materials, Julia Yeganyan

CHEMISTRY AND CHEMICAL ENGINEERING

The aim of this work is to study the areas of glass formation and metastable liquation of the pseudo-ternary system (MgO·Al₂O₃)-B₂O₃-SiO₂, and study of the crystallization process of glasses of cordierite composition. The crystallization process of glasses of cordierite composition containing B₂O₃ by a single-stage heat treatment at 1000 ^oC and 1200 ^oC, the nature of crystallization, the thermal properties of glasses and glass crystalline materials of the system (MgO·A_l2O₃)-B₂O₃-SiO₂ were studied. It revealed that during …