Materials Science and Engineering Commons^™

Multi-Scale Computational Modeling Of Metal/Ceramic Interfaces, Abu Shama Mohammad Miraz

Master's Theses

Multi-scale atomistic calculations were carried out to understand the interfacial features that dictate the mechanical integrity of the metal/ceramic nanolaminates. As such, first principles density functional theory (DFT) calculations were performed to understand the electronic and atomistic factors governing adhesion and resistance to shear for simple metal/ceramic interfaces, whereas molecular dynamics (MD) simulations were performed to observe the impact of interfacial structures, such as misfit dislocation network geometries and orientation relationships, on interfacial mechanical properties.

For the DFT investigation, we choose metals with different crystal structures, namely - Cu (fcc), Cr (bcc) and Ti (hcp) along with a variety of …

Atomic Oxygen Resistant Low Earth Orbit Stable Polymer Matrix Composites Employing Phenylphosphine Oxide Epoxy-Amines, Witold Fuchs

Dissertations

Atomic oxygen (AO) attacks polymer matrix composites (PMC’s) on the surfaces of spacecraft in low earth orbit (LEO) and threatens safe spacecraft operation and service life. Incorporating phenylphosphine oxide (PPO) groups into polymer chains offers a self-regenerating method of protection from AO but remains poorly understood. Herein, epoxies containing PPO groups were synthesized with increasing concentrations of phosphorus [P] from 0 to 8 wt % to investigate their AO resistance. Measurements confirmed the exposure of these materials to AO produces a passivation phosphate (POx) layer on the surface of the sample and the efficacy of the resultant layer was directly …

Voltage-Controlled Magnetic Anisotropy In Antiferromagnetic Mgo-Capped Mnpt Films, P. H. Chang, Wuzhang Fang, T. Ozaki, Kirill Belashchenko

Kirill Belashchenko Publications

The magnetic anisotropy in MgO-capped MnPt films and its voltage control are studied using first-principles calculations. Sharp variation of the magnetic anisotropy with film thickness, especially in the Pt-terminated film, suggests that it may be widely tuned by adjusting the film thickness. In thick films the linear voltage control coefficient is as large as 1.5 and -0.6 pJ/Vm for Pt-terminated and Mn-terminated interfaces, respectively. The combination of a widely tunable magnetic anisotropy energy and a large voltage-control coefficient suggest that MgO-capped MnPt films can serve as a versatile platform for magnetic memory and antiferromagnonic applications.

Design And Fabrication Of A Microstrip Bandpass Filter In Ltcc, Allison Rucker

Electrical Engineering Undergraduate Honors Theses

The goal of the project was to design and fabricate a bandpass filter with a center frequency of 25GHz with a 2GHz bandwidth. The first step was to do the calculation to design a bandpass filter to meet these specifications along with the properties of the Dupont^TM GreenTape^TM 9K7. HFSS was then used to verify the results from the initial calculations. There was a significant error between the two results, so more tweaking was done to the calculations to get a better center frequency. After a final design was decided, the fabrication process started. Low-Temperature Co-Fired Ceramics (LLTC) …

An Investigation Of Testing Parameters On The Frictional Properties Of Patterned Core-Shell Nanostructures, Colin Phelan

Graduate Theses and Dissertations

Friction tests are a beneficial means to analyze the tribological characteristics and advantages of materials and textured surfaces. However, the selected test parameters can significantly influence the results. This work explores the significance of the friction testing parameters on the frictional performances of core-shell nanostructure-textured surfaces (CSNTSs). Several applied normal loads (10 μN, 100 μN, and 500 μN) and diamond counterface indenter tip radii (1 μm, 5 μm, and 20 μm) were selected for the testing of Al/diamond-like-carbon (DLC) and Al/amorphous silicon (a-Si) CSNTSs. The measured friction values of the CSNTSs were then compared to a matching Al/DLC film and …

A 3d Sers Device For Highly Sensitive Detection Of Organic Chemicals In Liquid, Sankgeeth Vennila Sigamani

Material Science and Engineering Theses - Archive

Detection of organic chemicals in liquid medium have been gaining utmost attention in recent times. Real time detection and monitoring of a variety of environmental pollutants, explosive materials, chemical agents, and pharmaceutical drugs in liquid medium are of great need in today’s technological advancements. While there are several scattering, emission and spectroscopy techniques in use, Raman spectroscopy is attractive because of its molecular specificity i.e., each molecule has a Raman fingerprint. Raman spectroscopy utilizes the inelastic portion of the scattered wave for detection. But since intensity of inelastic scattering (Raman scattering) is very low, compared to the elastic scattering, low …

Characterization Of Asphalt/Recycled Plastic Blends Modified By Exfoliated Clay Nanoplatelets, Kate A. Nguyen

Material Science and Engineering Theses - Archive

There is a renewed interest from federal and state transportation agencies as well as the asphalt industry in developing successful utilization of recycled plastics in asphalt pavements. By incorporating a third material into the asphalt/plastic blend, a stimulation of enhanced compatibility between the waste plastics and asphalt can be observed. In this thesis, the need for increased stability and improved mechanical performance of asphalt blends, at low and high temperatures, are addressed through the use of dispersed/exfoliated organic montmorillonite nanoplatelets a.k.a. nanoclay (NC). Previous studies with non-dispersed NC as a modifier in asphalt (AS) and polyethylene (PE) blends reported the …

Study Of Electromigration Failure Mechanism In Micro Solder Joint, Hossein Madanipour

Material Science and Engineering Dissertations - Archive

The miniaturizing trend for advanced electronic devices has motivated the microelectronic industries to pursue device integration and packaging technology based on the micro-bump solder joint. This type of the joint enables devices with far higher interconnect density and miniaturized form factors which are ideal for mobile applications. The focus of this research is to conduct comprehensive investigation on the electromigration (EM) reliability of micro solder joint. For that purpose, a series of EM tests on micro solder joints under direct current (DC) load was conducted with variation in the contributing factors to EM failure, including solder joint arrangement (change of …

Metal Nanodendrites And Their Applications As 3d Surface Enhanced Scattering (Sers) Substrates, Aseem Athavale

Material Science and Engineering Dissertations - Archive

Ultrasensitive detection of chemicals and biological analytes has been a focus of a lot of studies in the recent years. In this search for the versatile detection technique, Surface Enhanced Raman Spectroscopy (SERS) has proved to be one powerful method. SERS is a powerful vibrational spectroscopy technique that allows for label free ultrasensitive detection. This method utilizes the Localized Surface Plasmon resonance (LSPR) effect of nanoparticles. LSPR effect is profound in noble metals such as silver (Ag) and gold (Au). We have developed a novel SERS substrate using Ag dendrites that can be applied as a ready-to-use device in a …

Multi-Scale Computational Modeling Of Metal/Ceramic Interfaces, Abu Shama Mohammad Miraz

Doctoral Dissertations

Multi-scale atomistic calculations were carried out to understand the interfacial features that dictate the mechanical integrity of the metal/ceramic nanolaminates. As such, first principles density functional theory (DFT) calculations were performed to understand the electronic and atomistic factors governing adhesion and resistance to shear for simple metal/ceramic interfaces, whereas molecular dynamics (MD) simulations were performed to observe the impact of interfacial structures, such as misfit dislocation network geometries and orientation relationships, on interfacial mechanical properties.

For the DFT investigation, we choose metals with different crystal structures, namely - Cu (fcc), Cr (bcc) and Ti (hcp) along with a variety of …

Steam Oxidation Of Ytterbium Disilicate Environmental Barrier Coatings With And Without A Silicon Bond Coat, Ken A. Kane, Eugenio Garcia, Sharon Uwanyuze, Michael Lance, Kinga A. Unocic, Sanjay Sampath, Bruce A. Pint

Materials Science and Engineering Faculty Research & Creative Works

The current generation of multilayer Si/Yb₂Si₂O₇ environmental barrier coatings (EBCs) are temperature limited by the melting point of Si, 1414°C. To investigate higher temperature EBCs, the cyclic steam oxidation of EBCs comprised of a single layer of ytterbium disilicate (YbDS) was compared to multilayered Si/YbDS EBCs, both deposited on SiC substrates using atmospheric plasma spray. After 500 1-h cycles at 1300°C in 90 vol%H₂O-10 vol%air with a gas velocity of 1.5 cm/s, both multilayer Si/YbDS and single layer YbDS grew thinner silica scales than bare SiC, with the single layer YbDS forming the …

Characterization Of Protein Aggregation Using A Solid-State Nanopore Device, Mitu Chandra Acharjee

Graduate Theses and Dissertations

Protein aggregation has been linked to many chronic and devastating neurodegenerative human diseases and is also strongly associated with aging. In the case of neurodegenerative diseases, α, β tubulins and tau proteins dissociate in a neuron cell and aggregate both intra and extra-cellularly. Tau and tubulin aggregations were found as one of the major causes of many neurodegenerative diseases, such as Parkinson’s, Picks, Alzheimer’s, Huntington, and Prion. Finding the state and mechanism of protein aggregation is significant. In this work, tau and tubulin aggregations were detected in ionic solutions using the solid-state nanopore technique. Besides tau and tubulin, aggregations of …

Characterization Of Gesn Semiconductors For Optoelectronic Devices, Hryhorii Stanchu

Graduate Theses and Dissertations

Germanium-tin alloys with Sn compositions higher than 8 at. % to 10 at. % have recently attracted significant interest as a group IV semiconductor that is ideal for active photonics on a Si substrate. The interest is due to the fact that while at a few percent of Sn, GeSn is an indirect bandgap semiconductor, at about 8 to 10 at. % Sn, GeSn transitions to a direct bandgap semiconductor. This is at first surprising since the solid solubility of Sn in Ge under equilibrium growth conditions is limited to only about 1 at. %. However, under non-equilibrium growth conditions, …

Comparison Of Tensile Properties Of Triaxial Braided Carbon Fiber Composites Made From Vacuum Assisted Resin Transfer Molding (Vartm) And Autoclave Molding, Donald A. Klosterman, Charles Browning

Chemical and Materials Engineering Faculty Publications

Triaxially braided fiber composites are increasingly being used in aerospace, ballistic, and sporting good applications due to their inherent damage tolerance, torsional stability, and cost compared to woven fabrics and unidirectional preforms. There have been numerous publications over the past 15-20 years on the mechanical properties and failure mechanisms of triaxial braided composites. However, most of these have involved panels made with autoclave curing. In the present study, braided carbon fiber composites were made using autoclave curing and vacuum assisted resin transfer molding (VARTM). The goal of the study was to compare the physical and tensile properties of quasi-isotropic panels …

Peptoid-Functionalized Gold Nanoparticles For Zika Virus Envelope Protein Detection, Meagan Olsen

Chemical Engineering Undergraduate Honors Theses

Detection and identification of viral pathogens is essential in providing effective and rapid medical treatment. Well-established detection methods can be expensive, slow, and sometimes unable to provide the needed sensitivity and specificity. The Zika virus is one clinically relevant pathogen that cannot be easily identified due to cross-reactivity with other viruses from the same family. Electrochemical sensors enhanced with peptoid-functionalized gold nanoparticles (AuNPs) are an alternative to traditional techniques that offers rapid, accurate, label-free pathogen detection for point-of-care diagnostics. To this end, a peptoid capable of binding to the Zika virus envelope protein was developed and its binding affinity for …

Characterizing High Entropy Alloys For Hypersonic Applications, Katherine Pettus

Mechanical Engineering Undergraduate Honors Theses

In this paper, the properties of a new and broad class of materials, high entropy alloys (HEAs), were investigated and evaluated for hypersonic applications. The plan was to identify candidate hypersonic HEAs and model the high-temperature strength using new advanced material models that account for asymmetry and anisotropy characterized with available test data. After accessing a local database of HEAs and their material properties in collaboration with Dr. Gorsse et al., it was realized the knowledge of HEAs is currently very broad but lacks depth. While hundreds of HEAs have been created and tested, none so far have both sufficient …

Si-Based Germanium Tin Photodetectors For Infrared Imaging And High-Speed Detection, Huong Tran

Graduate Theses and Dissertations

Infrared (IR) radiation spans the wavelengths of the windows: (1) near-IR region ranging from 0.8 to 1.0 μm, (2) shortwave IR (SWIR) ranging from 1.0 to 3.0 μm, (3) mid-wave IR (MWIR) region covering from 3.0 to 5.0 μm, (4) longwave IR (LWIR) spanning from 8.0 to 12.0 μm, and (5) very longwave IR extending beyond 12.0 μm. The MWIR and LWIR regions are important for night vision in the military, and since the atmosphere does not absorb at these wavelengths, they are also used for free-space communications and astronomy. Automotive and defect detection in the food industry and electronic …

Utilizing The Oxygen-Barrier Properties Of Poly(Isobutylene) To Enhance Photon Upconversion In Thermoplastic Elastomers, Haley Carroll

Honors Theses

Upconversion (UC) is the conversion of low energy light to higher energy light. It is utilized for a broad range of applications such as solar energy harvesting, microscopy of cellular biology, and cancer therapy. Specifically, triplet-triplet annihilation UC (TTA-UC) involves two dye species, a sensitizer and an annihilator, which are capable of upconverting noncoherent light such as sunlight. Traditionally, TTA-UC is achieved in solution, rubbers, or glasses, however, this work probes the capabilities of a thermoplastic elastomer (TPE) matrix to examine the effect of phase-separated morphology on the energy transfers necessary for TTA-UC. The system herein consists of poly(styrene-isobutylene-styrene) (SIBstar) …

Effects Of Static Mixer Geometry On Polyurethane Properties, Christian R. Dixon

Honors Theses

The field of additive manufacturing has gained significant academic interest in the past few decades with a recently developed type of three-dimensional (3D) printing. Reactive extrusion additive manufacturing combines precursor materials within a static mixer (SM) head, where polymerization begins before deposition. Variable static mixer geometries currently exist, but the relationship between mixer geometry and post-polymerization mechanical properties is undefined. To elucidate this relationship, a series of experiments with identical chemistry was performed using a high shear SM, a low shear SM, and a comparative batch reaction. While higher shear mixing trends with faster polymerization for step-growth polymerizations, consistent precursor …

Remote Performance Modulation Of Ultrafiltration Membranes By Magnetically And Thermally Responsive Polymer Chains, Arijit Sengupta, Anh Vu, Xianghong Qian, Sumith R. Wickramasinghe

Chemical Engineering Faculty Publications and Presentations

Ultrafiltration membranes, that respond to an external magnetic field and local temperature have been developed. Surface-initiated activator-generated electron transfer (AGET) atom transfer radical polymerization (ATRP) has been used to graft poly(N-isopropylacrylamide) (PNIPAm) from the surface of 300 kDa regenerated cellulose membranes. The polymerization initiator was selectively attached to the entire membrane surface, only the outer membrane surface or only the inner pore surface. A superparamagnetic nanoparticle was attached to the end of the polymer chain. The DI water flux as well as the flux and rejection of bovine serum albumin were investigated in the absence and presence of a 20 …

Surface Engineering Of Cerium Oxide Nanocyrstal Dispersions: Colloidal Properties, Ageing Effects, & Electroanalysis, Craig Neal

Electronic Theses and Dissertations, 2020-2023

Colloidal materials are highly diverse and present complex physicochemical properties which define their utilities in applications spanning diverse industries. In particular, nano-scale colloids have received tremendous attention due to their unique, specific activities as compared to larger-sized preparations. Within the biomedical sciences, nano-colloids are routinely used as inert carriers of therapeutics and/or diagnostic agents. Beyond this, researchers have developed functional colloids which demonstrate bio-active or diagnostic properties themselves: often related to an optimized, or tuned, surface character. Among these, nanoscale cerium oxide (nanoceria) has shown great promise as a bi-functional, therapeutic material: producing pro- or anti- oxidative chemical response in …

Mechanical Behavior Of Cyclo-18 On Nickel And Copper Substrates, Reagan Michael Kraft

Mechanical Engineering Undergraduate Honors Theses

Carbyne, an -hybridized allotrope of carbon, has been the subject of many studies recently due to its incredible mechanical properties and small size. More recently, another -hybridized allotrope known as cyclo-18, has gained interest. In this study, computational molecular dynamics will be used to determine the mechanical properties of cyclo-18. Peeling and shearing tests of the molecule will be conducted on nickel and copper, which are respectively active and less-active transition metals. Additionally, a carbyne chain of equal length will undergo the same tests on the copper substrate to compare the mechanical properties of the two. The results conclude that …

Noise Control In Sorting Conveyors, Eyra Herrera

Mechanical Engineering Undergraduate Honors Theses

E-commerce has increased the necessity of effective material handling equipment in warehouses and distribution centers. Sorter conveyors systems facilitate material handling by providing a reliable and automated system to classify and distribute products in a gentle and rapid manner. With the steady increase of speed in sorter conveyors to satisfy today’s industry demand, some systems have started to produce high noise levels that could potentially affect workers’ health. Since decreasing the speed of these conveyors is not a viable option to decrease noise in sorter equipment, industries have opted to find other ways to apply noise control to their equipment. …

Design And Control Of A Peristaltic Pump To Simulate Left Atrial Pressure In A Conductive Silicone Model, Jeremy Collins

Mechanical Engineering Undergraduate Honors Theses

According to the CDC, atrial fibrillation is responsible for more than 454,000 hospitalizations and approximately 158,000 deaths per year. A common treatment for atrial fibrillation is catheter ablation, a process in which a long flexible tube is guided through the femoral artery and to the source of arrhythmia in the heart, where it measures the electrical potential at various locations and converts problematic heart tissue to scar tissue via ablation. This paper details the design and control of a low-cost ($400) peristaltic pump system using repetitive control to replicate blood pressure in the left atrium in a conductive silicone model …

First-Principles Studies Of Nucleation Of Atomic-Layered Molybdenum Disulfide By Atomic Layer Deposition, Matthew Lawson

Boise State University Theses and Dissertations

This dissertation implements first-principles calculations to understand the nucleation mechanisms for atomic layer deposition (ALD) of molybdenum disulfide (MoS₂) using MoF₆ and H₂S precursors. ALD is a self-limiting process that can deposit a range of materials at the nanoscale, while maintaining chemical stoichiometry, atomic scale thickness control, and can conform to high-aspect ratio substrate designs. ALD is extremely sensitive to surface chemistry and morphology; therefore, it is critical to understand how these factors control deposition.

Density functional theory (DFT) was used to understand what factors can control the nucleation for ALD of MoS₂ using …

Ball-On-Ring Test Validation For Equibiaxial Flexural Strength Testing Of Engineered Ceramics, Adrianna E. Lupercio, Ehsan Moshkelgosha, Riley C. Winters, Cayden Doyle, Mahmood Mamivand, Andrew T. Nelson, Brian J. Jaques

Materials Science and Engineering Faculty Publications and Presentations

The validation of a ball-on-ring, equibiaxial flexural strength method to obtain the transverse rupture strength (TRS) of right cylindrical ceramic specimens was performed in this study. Validation of the test method was achieved using commercially available engineered high purity alumina disks and finite element (FE) model analysis. The validated fixture was then used to obtain the TRS and Weibull statistical analysis of MgO-partially stabilized zirconia (MSZ) and Y₂O₃-partially stabilized zirconia (YSZ) ceramic disks. TRS data for alumina, MSZ, and YSZ agreed with the TRS values reported in the literature. A statistically relevant number of samples (N …

Atomic Layer Deposition Of Sodium Fluoride Thin Films, Sara Kuraitis, Donghyeon Kang, Anil U. Mane, Hua Zhou, Jake Soares, Jeffrey W. Elam, Elton Graugnard

Materials Science and Engineering Faculty Publications and Presentations

The need for advanced energy conversion and storage devices remains a critical challenge amid the growing worldwide demand for renewable energy. Metal fluoride thin films are of great interest for applications in lithium-ion and emerging rechargeable battery technologies, particularly for enhancing the stability of the electrode-electrolyte interface and thereby extending battery cyclability and lifetime. Reported within, sodium fluoride (NaF) thin films were synthesized via atomic layer deposition (ALD). NaF growth experiments were carried out at reactor temperatures between 175 and 250 °C using sodium tert-butoxide and HF-pyridine solution. The optimal deposition temperature range was 175–200 °C, and the resulting …

Phase Field Modeling Of Crack Growth In Shape Memory Ceramics, Ehsan Moshkelgosha

Boise State University Theses and Dissertations

Shape memory ceramics (SMCs) are promising candidates for actuators in extreme environments such as high temperature and corrosive applications. Despite outstanding energy dissipation, compared to metallic shape memory materials, SMCs suffer from a sudden brittle fracture. While the interaction of crack propagation and phase transformation in SMCs has been the subject of several experimental and theoretical studies, mainly at the macroscale, the fundamental understanding of the dynamic interaction of crack propagation and martensitic transformation is poorly understood. This dissertation attempts to provide a mathematical model for crack propagation in transformable zirconia to address the shortage of classical methods. This dissertation …

Tensile-Strained Germanium Quantum Dots Grown On Indium Aluminum Arsenide (111)A And (110) By Molecular Beam Epitaxy, Kathryn Eva Sautter

Boise State University Theses and Dissertations

Molecular beam epitaxy (MBE) enables the growth of semiconductor nanostructures known as tensile-strained quantum dots (TSQDs). The highly tunable nature of TSQD properties means that they are of interest for a wide variety of applications including for infrared (IR) lasers and light-emitting diodes (LEDs), improved tunnel junction efficiency in multijunction solar cell technology, quantum key encryption, and entangled photon emission. In this project, I focus on one of the most technologically important materials, germanium (Ge). Ge has a high gain coefficient, high electron mobility, and low band gap: all excellent properties for optoelectronic applications. Until recently, these technological advantages were …

A Hyperelastic Porous Media Framework For Ionic Polymer-Metal Composites And Characterization Of Transduction Phenomena Via Dimensional Analysis And Nonlinear Regression, Zakai J. Olsen

UNLV Theses, Dissertations, Professional Papers, and Capstones

Ionic polymer-metal composites (IPMC) are smart materials that exhibit large deformation in response to small applied voltages, and conversely generate detectable electrical signals in response to mechanical deformations. The study of IPMC materials is a rich field of research, and an interesting intersection of material science, electrochemistry, continuum mechanics, and thermodynamics. Due to their electromechanical and mechanoelectrical transduction capabilities, IPMCs find many applications in robotics, soft robotics, artificial muscles, and biomimetics. This study aims to investigate the dominating physical phenomena that underly the actuation and sensing behavior of IPMC materials. This analysis is made possible by developing a new, hyperelastic …