Materials Science and Engineering Commons^™

Assessment Of Natural Radioactivity And Radiation Hazards Of Building Materials In Kinondoni District, Dar Es Salaam, Tanzania, Huruma P Mammba, Vitus A Balobegwa, Alex P Muhulo, Peter A Pantaleo, Remigius A Kawala

Tanzania Journal of Science

Natural radionuclides from building materials are one of the potential sources of external as well as internal radiation exposure to the human body. Currently, this exposure has been increasing since people spend more than  of their time indoors (ICRP 1991). Commonly used building materials from Kinondoni District were investigated using γ-spectrometry; their activity concentrations of 226Ra, 232Th and 40K in Bq/kg were measured. The results showed that average values of activity concentrations of 226Ra, 232Th and 40K were 15.62, 21.51 and 237.99 Bq/kg, respectively. All the activity concentrations in the studied samples were lower than the world average values of …

Copper Slag As A Potential Waste Filler For Polyethylene-Based Composites Manufacturing, Aleksander Hejna, Paulina Kosmela, Mateusz Barczewski, Olga Mysiukiewicz, Adam Piasecki

Tanzania Journal of Science

The present study aimed to analyze the application of waste material from copper production– copper slag (ŻŻL) as filler for composites based on the high-density polyethylene (HDPE). Copper slag filler was introduced in the amounts of 1–20 wt%, and its influence on the appearance (color analysis), chemical structure (Fourier-transform infrared (FTIR) spectroscopy), microstructure (optical microscopy), as well as static (tensile tests) and dynamic (dynamical mechanical analysis (DMA)) mechanical properties of composites were investigated. Proper dispersion of filler implicated that the incorporation of up to 5 wt% of filler caused only slight, 5% drop of tensile strength, with the simultaneous 16% …

Upgrading Biogas Using Eburru Zeolitic Rocks And Other Adsorbent Materials To Remove Carbon Dioxide And Hydrogen Sulphide, James K Mbugua, Joseph M Mwaniki, Damaris M Nduta, Francis B Mwaura

Tanzania Journal of Science

The trace amounts of carbon dioxide and hydrogen sulfide in raw biogas lower its calorific value,cause corrosion and make it hard to compress biogas into the cylinder. Raw biogas was obtainedfrom anaerobic digestion of cow dung and market wastes. The gas was stored in tubes or urine bagbefore upgrading. Natural zeolite rocks, maize cobs, steel wire, desulphurizer, and worn-out tyreswere used as the upgrade materials. The composition of biogas was recorded before and afterupgrading using a GP180 portable biogas analyzer from Henan, China. The measured level of rawbiogas was 0.0227% H2S, >20% CO2 and 52-56% CH4. The most efficient upgrade …

Influence Of Carbonitriding Conditions On Phase Composition And Residual Stresses For 20mncr5 Low Alloy Steel, Richard J Katemi, Jeremy Epp

Tanzania Journal of Science

This paper reports an investigation of the influence of carbonitriding conditions for 20MnCr5 low alloy steel. Three gaseous carbonitriding conditions were investigated based on different carbon and nitrogen potentials to attain varying levels of carbon between 0.62 and 0.93% mass, whereas for nitrogen between 0.19 and 0.26% mass at the surface. Analysis of retained austenite and residual stress distributions was conducted using X-ray diffraction technique. The effective case depth varied between 900 and 1200 µm. The case microstructures were characterized by varying proportions of retained austenite and martensite, while the core contained essentially bainitic microstructures. The maximum amount of retained …

Use Of Biomimicry Design Approach In Constructing Sustainable Resilient Structures (Case Study: Port Of Beirut), Farouk Bader, Marwan Halabi, Hiba Mohsen, Maged Youssef

BAU Journal - Creative Sustainable Development

Resiliency is not the same as sustainability, nor its substitute, but definitely the two concepts complement each other’s. Sustainability is the avoidance of depletion of natural resources to maintain ecological balance whereas resiliency is to recover, adapt and keep going in the face of setbacks. While designing with green approach is important but what will happen to leed points if the building becomes uninhabitable due to disasters, that’s where resiliency comes into play. The 2019 statistics showed that natural disasters accounted for 133 billion dollars losses and manmade ones accounted for other 7 billion in addition to 11,755 people worldwide …

First-Principles Studies Of Substituent Effects On Squaraine Dyes, German Barcenas, Austin Biaggne, Olga A. Mass, Christopher K. Wilson, Ryan D. Pensack, Jeunghoon Lee, William B. Knowlton, Bernard Yurke, Lan Li

Materials Science and Engineering Faculty Publications and Presentations

Dye molecules that absorb light in the visible region are key components in many applications, including organic photovoltaics, biological fluorescent labeling, super-resolution microscopy, and energy transport. One family of dyes, known as squaraines, has received considerable attention recently due to their favorable electronic and photophysical properties. In addition, these dyes have a strong propensity for aggregation, which results in emergent materials properties, such as exciton delocalization. This will be of benefit in charge separation and energy transport along with fundamental studies in quantum information. Given the high structural tunability of squaraine dyes, it is possible that exciton delocalization could be …

Cyclic Regeneration Of Nanostructured Composites For Catalytic Applications, Fatih Dogan

Materials Science and Engineering Faculty Research & Creative Works

A cermet catalyst material, defining a matrix having interconnected open pores, the matrix selected from the group consisting of YSZ and CGO and defining a substrate, a ceramic coating having a general formula AyBnOx at least partially coating the pores, and a plurality of metal particles A at least partially embedded in the ceramic coating. A is selected from the group consisting of Co, Cu, Ce, Ni, Ti, and combinations thereof and B is selected from the group consisting of Mo, W, Ce, and combinations thereof. When the coating is in a first oxidizing atmosphere and at a temperature between …

Mash 2016 Test Level 3 And Test Level 4 Evaluation Of Roadside Safety Barrier With Pedestrian Features, Miguel Angel Hinojosa Palacios

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

The Minnesota Department of Transportation (MnDOT) desires to use a vehicle, bicycle, and pedestrian combination bridge railing system along pedestrian and bicycle bridge paths. The system was evaluated per MASH 2016.

In full-scale crash test no. MNPD-3, the system was evaluated according to MASH test designation no. 3-11. The 2014 Dodge Ram 1500 crew cab pickup truck impacted the system 71¼ in. upstream from the centerline of post no. 4 with a speed of 63.4 mph at an angle of 25.3 degrees. The combination railing system was found to meet the AASHTO MASH 2016 TL-3 impact safety criteria.

MnDOT uses …

Effects Of Air Pollution, Temperature And Moisture Content On Copper And Silver Corrosions And The Reliability Of Data Center Equipment, Rui Zhang

Dissertations - ALL

The effects of moisture content, temperature, and pollutant mixture on atmospheric corrosion of copper and silver were investigated by exposing test specimens to different environmental conditions, followed by surface characterization using the coulometric reduction, Scanning Electron Microscopy, and Energy Dispersive Spectrometry (SEM/EDS). Printed circuit board test cards (PCBs) with bare copper were also used to investigate the effects of voltage bias on the PCBs on the corrosion rate. The test specimens were exposed to mixed flowing gases (MFG) environment with eight different combinations of the following five pollutants at the fixed concentration levels: 60 ppb O3, 80 ppb NO2, 40 …

Effects Of Air Pollution, Temperature And Moisture Content On Copper And Silver Corrosions And The Reliability Of Data Center Equipment, Rui Zhang

Dissertations - ALL

The effects of moisture content, temperature, and pollutant mixture on atmospheric corrosion of copper and silver were investigated by exposing test specimens to different environmental conditions, followed by surface characterization using the coulometric reduction, Scanning Electron Microscopy, and Energy Dispersive Spectrometry (SEM/EDS). Printed circuit board test cards (PCBs) with bare copper were also used to investigate the effects of voltage bias on the PCBs on the corrosion rate. The test specimens were exposed to mixed flowing gases (MFG) environment with eight different combinations of the following five pollutants at the fixed concentration levels: 60 ppb O3, 80 ppb NO2, 40 …

Composite Elastomer Materials Based On New Ingredients, Akhmadjon Ibadullaev, Elmira Teshabaeva, Murodjon Vapaev

CHEMISTRY AND CHEMICAL ENGINEERING

The results of a study present the effect of new modified ingredients on the complex of properties of composite elastomeric materials. Methods for modifying mineral fillers have developed. It found that the introduction of modified ingredients into the composition of elastomeric compositions enhances the interfacial interaction at the “rubber-filler” interface and the formation of additional bonds between rubber macromolecules and functional groups, resulting in an improvement in the complex of properties of the compositions. New accelerators, activators for vulcanization of rubbers and plasticizers with stabilizing properties have proposed, and their optimal contents in the composition have determined.

Composition For Protecting Technological Equipment Against Salt Deposits And Internal Corrosion, Hasan Kadirov, Sadritdin Turabdjanov

CHEMISTRY AND CHEMICAL ENGINEERING

Aimed studies on the synthesis of metal complexonates have carried out. The reaction of obtaining zincate zincate oxyethylene diphosphonic acid OEDP has studied. On the basis of synthesized zincate-OEDP, compositions of corrosion inhibitors and deposits of mineral salts with the addition of a vacuum residue of monoethanolamine (RMEA) and polyaminocrotanol (PKI-3), which are able to effectively suppress corrosion processes in environments with different initial corrosive activity, have been compiled. It is proved that the high efficiency of the composition OEDP : zincate-OEDP : PKI-3 (maximum protective effect - 97.9%) is much more effective than the composition OEDP : zincate-OEDP : …

Rational Disposal Of Pet Containing Waste And Prospects For The Synthesis Of New Polymers, Asror Juraev, Muzaffar Alimukhamedov, Ravshan Adilov, Farhod Magrupov

CHEMISTRY AND CHEMICAL ENGINEERING

As a result of the research on the utilization of polyethylene terephthalate-containing household waste, a promising direction was identified in the production of a new type of secondary polyethylene terephthalate (SPET) - unsaturated polyesters.It was revealed that the final product, which formed when the alcoholization process is complete in any proportion of of glycol and secondary polyethylene terephthalate, is the bisalkylent terephthalate of terephthalic acid; the content of the alcoholysis product consists of bisalkylent terephthalate, different molecule mass, functionally hydroxyl-containing complex polyester polyol and free diols.

The laws of alcoholization of secondary …

Layered Bismuth Tungstate: Heterogeneous Photocatalysis For Environmental Remediation, Mirabbos Hojamberdiev, Zuhra Kadirova, Shahlo Daminova, Khasan Sharipov, Nobuhiro Matsushita

CHEMISTRY AND CHEMICAL ENGINEERING

Air and water pollution has been one of the challenging environmental issues in modern society. Since the Honda-Fujishima effect was first reported in 1972, a semiconductor-based photocatalysis has been regarded as one of the most green and economical processes for potential application in environmental remediation. Bismuth-based semiconductors are regarded as a promising group of advanced photocatalytic materials due to their suitable band gap for visible light response, an increased mobility of photo-generated charge carriers because of well-dispersed Bi 6s orbital, non-toxicity, and easy tailoring of their morphologies. To utilize its full potential in environmental remediation, various studies have been carried …

Chitosan/Gelatin/Silver Nanoparticles Composites Films For Biodegradable Food Packaging Applications., Sreelekha Ediyilyam, Bini George, Sarojini Sharath Shankar, Thomas Thuruthiyil Dennis, Stanisław Wacławek, Miroslav Černík, Vinod V T Padil

Department of Medicine Faculty Papers

The food packaging industry explores economically viable, environmentally benign, and non-toxic packaging materials. Biopolymers, including chitosan (CH) and gelatin (GE), are considered a leading replacement for plastic packaging materials, with preferred packaging functionality and biodegradability. CH, GE, and different proportions of silver nanoparticles (AgNPs) are used to prepare novel packaging materials using a simple solution casting method. The functional and morphological characterization of the prepared films was carried out by using Fourier transform infrared spectroscopy (FTIR), UV-Visible spectroscopy, and scanning electron microscopy (SEM). The mechanical strength, solubility, water vapor transmission rate, swelling behavior, moisture retention capability, and biodegradability of composite …

Sound, Material And Strength Correlation, Ryan Mcbride

Symposium of Student Scholars

With a growing amount of manufacturing utilizing 3D printing, there is a correlation between strength and material which can affect sound produced by sirens. An air raid siren that has been downloaded from Thingiverse.com spins with a 49:1 gear ratio to produce 2 tone sounds and with that large number of revolutions comes friction, and in order to create a 3D printed air raid siren, the siren must be made out of a material that can withstand high temperatures without melting and quick rotations without delaminating. There are many materials that can be printed to withstand those forces, but it …

Ph-Responsive Oxygen/Glucose Delivery System To Increase Cell Survival Under Ischemia, Yubin Ying

McKelvey School of Engineering Graduate Student Theses & Dissertations

Ischemic diseases, including myocardial infarction, stroke and limb ischemia, are life-threatening vascular diseases with high mortality. Under ischemic condition, less blood supply causes insufficient oxygen and nutrients transported to the affected tissues, which leads to cell death. To support cell survival under ischemia, oxygen and nutrients (especially glucose) are needed for aerobic respiration to generate energy. Therefore, directly supplying oxygen and glucose to the ischemic tissues is a promising therapy for ischemic diseases. In this work, we aim to design biomaterials to deliver oxygen and glucose to enhance cell survival under ischemia. In the first project, we fabricated oxygen releasing …

Open Source Vacuum Oven Design For Low-Temperature Drying: Performance Evaluation For Recycled Pet And Biomass, Benjamin R. Hubbard, Lindsay I. Putman, Stephen Techtmann, Joshua M. Pearce

Michigan Tech Publications, Part 1

Vacuum drying can dehydrate materials further than dry heat methods, while protecting sensitive materials from thermal degradation. Many industries have shifted to vacuum drying as cost-or time-saving measures. Small-scale vacuum drying, however, has been limited by the high costs of specialty scientific tools. To make vacuum drying more accessible, this study provides design and performance information for a small-scale open source vacuum oven, which can be fabricated from off-the-shelf and 3-D printed components. The oven is tested for drying speed and effectiveness on both waste plastic polyethylene terephthalate (PET) and a consortium of bacteria developed for bioprocessing of terephthalate wastes …

Experimental Investigation Of Surface Resistivity Of Yttrium Stabilized Zirconium As A Thin Film, Matthew J. Melfi

Seton Hall University Dissertations and Theses (ETDs)

Solid Oxide Fuel Cells are devices that use electrochemical reactions to convert chemical energy from fuel to electricity. In comparison with coal power plants, a Solid Oxide Fuel Cell, produces a higher electrical conversion efficiency. However, at higher temperatures (1000°C) it creates a lower ionic conductivity, which limit the Solid Oxide Fuel Cells. When lowering the temperature, the ohmic resistance increases. In our research, an Yttrium Stabilized Zirconium layer will be produced from a fine dimple grain structure allowing high flow of oxygen mobility. This mobility increases ionic conductivity and decrease ohmic loss. The goal of our research is first …

Computational Design Of Nonlinear Stress-Strain Of Isotropic Materials, Askhad M.Polatov, Akhmat M. Ikramov, Daniyarbek Razmukhamedov

Chemical Technology, Control and Management

The article deals with the problems of numerical modeling of nonlinear physical processes of the stress-strain state of structural elements. An elastoplastic medium of a homogeneous solid material is investigated. The results of computational experiments on the study of the process of physically nonlinear deformation of isotropic elements of three-dimensional structures with a system of one- and double-periodic spherical cavities under uniaxial compression are presented. The influence and mutual influence of stress concentrators in the form of spherical cavities, vertically located two cavities and a horizontally located system of two cavities on the deformation of the structure are investigated. Numerical …

Rehology And Electrical Conductivity Of Particulate Composites In Additive Manufacturing, Bin Xia

Mechanical Engineering Research Theses and Dissertations

Extrusion-based multi-functional additive manufacturing (AM) has been a rapidly developing area in AM recently. Particulate composites are widely used in this area to provide different functionalities with different types of particulate additives. However, there is no systematic understanding of the behavior of particulate composites during extrusion (especially in small nozzles) or of their properties once deposited in the build. This work investigates the properties of the type of particulate composites usually used in additive manufacturing, composed of a polymer matrix material and particulate additives within the micrometer scale. The focus is on the material rheology in the nozzle/capillary (for the …

Converting Inorganic Rust To Organic Nanostructured Conducting Polymers: Synthesis And Applications, Yifan Diao

McKelvey School of Engineering Graduate Student Theses & Dissertations

Iron rust is a type of corrosion product, coming from the chemical reaction between iron and oxygen in the presence of water that first documented ca. 800 BCE. It is a heterogeneous inorganic solid-state material composed of multiple phases and is ubiquitous throughout the universe. Rust species such as Hematite (α-Fe2O3), Akaganeite (β-FeOOH), and ferrous hydroxide (Fe(OH)2), make up the solid-state chemical family composed of iron oxides, oxyhydroxides, and hydroxides that are typically recognized as chemical waste. Conducting polymer is a type of organic plastic composed of long chains with repeating subunits that bonding with strong interactions between neighboring molecules. …

Plasmonically-Enhanced Ultrasensitive Biodetection Technologies, Zheyu Wang

McKelvey School of Engineering Graduate Student Theses & Dissertations

Detection and quantification of biomolecules within biological fluids and tissues is of fundamental importance to biomedical research and clinical diagnostics. It is impossible to fully characterize complex, non-linear, biochemical systems without being able to accurately and quantitatively determine the component molecules. This problem is ubiquitous across all domains of biomedical research, and it is a major barrier to fully understanding health, ageing, and disease. Such bottlenecks are extremely challenging to be solved, especially for proteins and peptides, which do not have amplification schemes such as polymerase chain reaction for nucleic acids, because relevant concentrations of molecules related to diseases such …

Aerosol Vapor Synthesis Of Organic Processable Pedot Particles And Measuring Electric Conductivity Using A 3d Printed Probe Station, Yang Lu

McKelvey School of Engineering Graduate Student Theses & Dissertations

Conducting polymers are organic semiconductors characterized by conjugated backbones (alternating single-double bonds) that enable mixed ionic-electronic conductivity. Their polymeric nature, tunable band structure and reversible redox capability have demonstrated fundamental advances in the fields ranging from electrochemical energy storage, sensing, to electro/photo catalysis and neuromorphic engineering. Conjugated backbones, the origin of all the unique physical and chemical properties associated with conducting polymers, prevent their solubility due to high lattice energy which hinders processing. Current solution utilizes a long-chain polymer (PSS) as dopants to render conducting polymer water dispersible (PEDOT:PSS). Nonetheless, PSS is highly acidic and hydrophilic limiting applicability with acid-incompatible …

Rational Design And Optimization Of Perovskite Semiconductors, Arashdeep Thind

McKelvey School of Engineering Graduate Student Theses & Dissertations

ABSTRACT OF THE DISSERTATIONRational design and optimization of perovskite semiconductors by Arashdeep Singh Thind Doctor of Philosophy in Materials Science and Engineering Washington University in St. Louis, 2021 Professor Rohan Mishra, Chair

Lead-halide perovskites have emerged as a promising class of semiconductors for next-generation solar cells and optoelectronic devices. Since the report of the photovoltaic effect in 2009 in CH3NH3PbBr3 and CH3NH3PbI3, the power conversion efficiency of these perovskites has rapidly approached 25.2% from 3.8%. These perovskite semiconductors can be synthesized using low-cost solution-based techniques, unlike traditional semiconductors that require slow and expensive growth techniques to reduce the formation of …

Lagrangian Diffusion Properties Of A Free Shear Turbulent Jet, Bianca F. Viggiano, Thomas Basset, Stephen Solovitz, Thomas Barois, Mathieu Gibert, Nicolas Mordant, Laurent Chevillard, Romain Volk, Mickael Bourgoin, Raul Bayoan Cal

Mechanical and Materials Engineering Faculty Publications and Presentations

A Lagrangian experimental study of an axisymmetric turbulent water jet is performed to investigate the highly anisotropic and inhomogeneous flow field. Measurements are conducted within a Lagrangian exploration module, an icosahedron apparatus, to facilitate optical access of three cameras. Stereoscopic particle tracking velocimetry results in three-component tracks of position, velocity and acceleration of the tracer particles within the vertically oriented jet with a Taylor-based Reynolds number Reλ≃230. Analysis is performed at seven locations from 15 diameters up to 45 diameters downstream. Eulerian analysis is first carried out to obtain critical parameters of the jet and relevant scales, namely the Kolmogorov …

Exploration Of The Sludge Biodiesel Pathway, Zachary Christman

Department of Agronomy and Horticulture: Dissertations, Theses, and Student Research

Wastewater sludge is an overlooked source of fat, oil, and grease (FOG) that could be converted into biodiesel. The United States produces about 8 million tons of sludge per year. The disposal cost for this amount of sludge is about 2 billion US dollars. The widespread availability and low cost of sludge compared to other biodiesel raw materials make it an economical choice for a renewable fuel. Using sludge as a raw material can produce 25 to 30 mg per gram of fatty acid methyl ester (FAME); the main component of biodiesel. Sludge biodiesel has the potential of transforming a …

Device Development For Long-Term Systemic Oral Biologic Drug Delivery, Benjamin Wankum

Department of Mechanical and Materials Engineering: Dissertations, Theses, and Student Research

A biologic drug is a drug that is produced by a living organism. Biologic drugs are used to treat various medical conditions such as arthritis, diabetes, or certain forms of cancers due to their high potency and high selectivity of action. Drawbacks of biologics include their poor stability in the gastrointestinal tract and their poor absorption. In effect, this gives the drugs very low bioavailability and short therapeutic half-lives. To combat these obstacles, current delivery methods include subcutaneous injections at home or intravenous or intramuscular injections in a medical facility.

The overall scientific goal of the research was to utilize …

Higher-Order Topolectrical Semimetal Realized Via Synthetic Gauge Fields, Xiang Ni, Andrea Alù

Advanced Science Research Center

Classical bosonic systems may be tailored to support topological order and unidirectional edge transport exploiting gauge fields. Here, we theoretically explore how synthetic gauge fields may be used to induce higher-order topological phases and zero-energy boundary states. We demonstrate these principles in two types of three-dimensional topolectrical circuits with synthetic gauge fields threading through their reduced two-dimensional lattices, leading to a half-quantized quadrupole charge within a region of the momentum space. We theoretically show the emergence of nodal line rings and Weyl points in the bulk dispersion, whose projected surfaces and hinges support surface Fermi arcs and flat hinge Fermi …

Supporting Materials From The Program "Development Of A Physically-Based Creep Model Incorporating Eta Phase Evolution For Nickel Base Superalloys", N. R. Mohale, C. L. White, P. G. Sanders, W. W. Milligan, J. P. Shingledecker, P. A. Bridges

Michigan Tech Research Data

This research was funded by the US Department of Energy, Fossil Energy Program, Grant Number DE-FE0027822, with Omer Bakshi as the Program Manager. The grant conditions required that all supporting data and materials would be made publicly-available. This public repository was created on May 13, 2021.