Materials Science and Engineering Commons^™

Surfactant Formulations For Water-Based Processing Of A Polythiophene Derivative, Cameron Dean Danesh

Master's Theses

Conjugated polymers are semiconducting materials that are currently being researched for numerous applications from chemical and biological sensors to electronic devices, including photovoltaics and transistors. Much of the novel research on conjugated polymers is performed in academic settings, where scientists are working to prepare conjugated polymers for commercially viable applications. By offering numerous advantages, inherent in macromolecular materials, conjugated polymers may hold the key to cheap and environmentally friendly manufacturing of future electronic devices. Mechanical flexibility, and solvent-based coating processes are two commonly cited advantages. Transitions in the backbone conformation of polythiophenes (PT) in organic solvents have been widely observed …

Shelf Life Study Of Electrospun Plga Copolymers, Sean Youra, Nick Hudson

Biomedical Engineering

Poly(lactic-co-glycolic acid) (PLGA) is one of the most commonly used copolymers for electrospinning in tissue engineering applications. However, most research has not focused on the copolymer itself in regards to how long it can be used effectively and if varying the concentrations of polylactic acid (PLA) and polyglycolic acid (PGA) affect the resulting properties. Electrospinning is the method we use to create the three-dimensional constructs, or “scaffolds”, for the blood vessel mimic (BVM) in the tissue engineering lab. The aim of our project was to investigate if the morphology and mechanical properties of the scaffolds changed over time when they …

Influence Of Sinx/Si Interface States On Si Solar Cells, Santosh Sahoo

Dissertations

Impact of the SiN_x/n⁺-Si interface on silicon solar cell performance was investigated, where SiN_x is used as a passivation layer. Significant shifts in capacitance, conductance and leakage current characteristics were observed for metal/SiN:H/n⁺-Si MOS capacitor when it was subjected to a constant voltage stress (CVS) of +10V at room temperature. The interface trap density (D_it) across the SiN:H/n⁺-Si interface increased from 6.3 x 10⁹ to 7.5 x 10⁹ cm^-2 eV^-1 after a 500-second stress whereas the n⁺/p junction diode remained unaffected by the …

Synthesis And Characterization Of Novel Boron-Based Nanostructures And Composites, Rajen B. Patel

Dissertations

A number of nanomaterials have been synthesized by using a method that has been previously utilized to make pure boron nanostructures through the addition of different reactant gases to the process. This method was pioneered by Iqbal-Liu and will be referred to as the IL method in this dissertation. The IL method successfully created boron nanowires, boron nanoflakes, and boron nanotubes. In this dissertation, by adding methane, hydrogen sulfide, and ammonia to the process, an entire family of nanomaterials is prepared. These include nanowires, nano-heterostructures, and thin nanoplatelets of a variety of elemental compositions. These materials can be integrated with …

The Effects Of Rapid Stretch Injury On Rat Neocortical Cultures, George Constandinos Magou

Dissertations

Several key biological mechanisms of traumatic injury to axons have been elucidated using in vitro stretch injury models. These models, however, are based on the experimentation of single cultures keeping productivity slow. Indeed, low yield has hindered important and well founded investigations requiring high throughput methods such as proteomic analyses. To meet this need, a multi-well high throughput injury device is engineered to accelerate and accommodate the next generation of traumatic brain injury research. This modular system stretch-injures neuronal cultures in either a 24-well culture plate format or six individual wells simultaneously. Custom software control allows the user to accurately …

Foaming Of Amorphous Drug Delivery Systems Prepared By Hot Melt Mixing And Extrusion, Graciela Terife

Dissertations

Currently there is considerable interest from both academe and pharmaceutical industry in exploring foaming processes and their products in drug delivery applications. However, there is still little knowledge of the impact of the morphology of the foamed structures on the performance of drug products in spite of some publications in this area. Therefore, the main objective of this dissertation is to gain a fundamental understanding of the correlation between foam morphology and performance of amorphous drug delivery systems, which are comprised of an Active Pharmaceutical Ingredient (API) and Polymer excipient.

The Hot Melt Extrusion (HME) process is used to compound …

Measurement Of Gas Flow Through Porous Structures Using Thz Spectroscopy, Yihui Wang

Theses

Comparing THz transmission through a sample with the transmission through free-space allows one to calculate the THz absorbance of a sample. Previous studies have focused on using THz absorbance to measure the diffusion of liquid through materials. In this study, the ability of THz spectroscopy to measure the flow of gas in a porous material, packaging foam, is investigated. Specifically, Terahertz spectroscopy from 0.5 to 0.7 THz is used to measure the THz absorption of 1, 1 -difluoroethane. Several experiments are performed to test the ability of THz spectroscopy to measure the flow of gas in a porous material: (1) …

Current Measurements In Electrospinning, Clinton K. Lien

Theses

Electrospinning provides an economical method of producing nanofibers. The current carried by the main spinning jet is found to be one of the factors in determining the diameter of the fiber product. However, current sources such as the corona discharge and secondary jets will lead to a systematic overestimation of the actual current value.

In this research, experiments with different configurations are set up to investigate the influence of various parameters on the measured current. It is noticed that the measured current is nearly independent on the flow rate of the solution and the external cover. A large amount of …

Role Of Materials & Design On Performance Of Baseball Bats, Kim Benson-Worth

Theses

Baseball bat safety has become an increasing area of interest with more than 19 million people in the United States alone participating in this sport. An increase in injuries resulting from bat injuries has brought the performance of the bats into question. A review of several studies focusing on the effects of the material properties of various baseball bats designs were examined. From this review it is evident that player and spectator safety greatly rely on proper baseball bat design. There was a 30% reduction in the Multi-Piece Failures (MPF) of wooden bats once the requirement of a Slope of …

Study Of Poly (L-Lactic Acid)/Poly (D-Lactic Acid) Stereocomplex As Nucleating Agent For Poly (L- Lactic Acid) Crystallization, Yuan Lao

Theses

Poly (lactic acid) (PLA) is a biodegradable polymer with good renewability and processability. However, it has some drawbacks. The Poly (lactic acid) (PLA) stereocomplex formed via the interaction between optical isomers Poly (L-lactic acid) (PLLA) and Poly (D-lactic acid) (PDLA), provides improvements on PLA thermomechanical properties. To investigate the nucleating effect brought by the PLA stereocomplex, samples of PLLA blended with different content of PDLA are prepared by the solution casting method. With different cooling rates (5, 15, 25 °C/min), DSC non-isothermal crystallization experiments are performed. The results suggest that in the presence of the stereocomplex, the PLLA crystallization temperatures …

Stress Analysis Of Ramberg-Osgood And Hollomon 1-D Axial Rods, Ronald J. Giardina Jr

LSU New Orleans Theses and Dissertations

In this paper we present novel analytic and finite element solutions to 1-D straight rods made of Ramberg-Osgood and Hollomon type materials. These material models are studied because they are a more accurate representation of the material properties of certain metals used often in manufacturing than the simpler composite linear types of stress/strain models. Here, various types of loads are considered and solutions are compared against some linear models. It is shown that the nonlinear models do have manageable solutions, which produce important differences in the results - attributes which suggest that these models should take a more prominent place …

Fatigue Testing And Data Analysis Of Welded Steel Cruciform Joints, Alina Shrestha

LSU New Orleans Theses and Dissertations

In this study, ABS Publication 115, “Guidance on Fatigue Assessment of Offshore Structures” is briefly reviewed. Emphasis is on the S-N curves based fatigue assessment approach of non-tubular joints, and both size and environment effects are also considered. Further, fatigue tests are performed to study the fatigue strength of load-carrying and non-load-carrying steel cruciform joints that represent typical joint types in marine structures. The experimental results are then compared against ABS fatigue assessment methods, based on nominal stress approach, which demonstrates a need for better fatigue evaluation parameter. A good fatigue parameter by definition should be consistent and should correlate …

Studies On Structure And Property Of Polymer-Based Nano-Composite Materials, Yun Zhai

LSU New Orleans Theses and Dissertations

The mixing of polymers and nanoparticles makes it possible to give advantageous macroscopic material performance by tailoring the microstructure of composites. In this thesis, five combinations of nano inclusion and polymer matrix have been investigated.

The first type of composites is titanium dioxide/ polyaniline combination. The effects of 4 different doping-acids on the microstructure, morphology, thermal stability and thermoelectric properties were discussed, showing that the sample with HCl and sulfosalicylic dual acids gave a better thermoelectric property. The second combination is titanium dioxide/polystyrene composite. Avrami equation was used to investigate the crystallization process. The best fit of the mass derivative …

The Effects Of A Collaborative Problem-Based Learning Experience On Students’ Motivation In Engineering Capstone Courses, Brett D. Jones, Cory M. Epler, Parastou Mokri, Lauren H. Bryant, Marie C. Paretti

Interdisciplinary Journal of Problem-Based Learning

We identified and examined how the instructional elements of problem-based learning capstone engineering courses affected students’ motivation to engage in the courses. We employed a two-phase, sequential, explanatory, mixed methods research design. For the quantitative phase, 47 undergraduate students at a large public university completed a questionnaire that measured the components of the MUSIC Model of Academic Motivation (Jones, 2009): empowerment, usefulness, success, situational interest, individual interest, academic caring, and personal caring. For the qualitative phase that followed, 10 students answered questions related to the MUSIC components. We identified several instructional elements that led to motivating opportunities that affected students’ …

Heterogeneous Relaxation Dynamics In Amorphous Materials Under Cyclic Loading, Nikolai V. Priezjev

Mechanical and Materials Engineering Faculty Publications

Molecular dynamics simulations are performed to investigate heterogeneous dynamics in amorphous glassy materials under oscillatory shear strain. We consider three-dimensional binary Lennard-Jones mixture well below the glass transition temperature. The structural relaxation and dynamical heterogeneity are quantified by means of the self-overlap order parameter and the dynamic susceptibility. We found that at sufficiently small strain amplitudes, the mean square displacement exhibits a broad subdiffusive plateau and the system undergoes nearly reversible deformation over about 104 cycles. Upon increasing strain amplitude, the transition to the diffusive regime occurs at shorter time intervals and the relaxation process involves intermittent bursts of large …

College Of Engineering Senior Design Competition Spring 2013, University Of Nevada, Las Vegas

Fred and Harriet Cox Senior Design Competition Projects

Senior Design Experience

Part of every UNLV engineering student's academic experience, the Senior Design project stimulates engineering innovation and entrepreneurship. Each student in their senior year chooses, plans, designs and prototypes a product in this required element of the curriculum. Working in teams, the senior design project encourages students to use everything learned in the engineering and computer design programs to create a practical, real world solution to an engineering challenge.

Beyond the classroom ...

Because of the requirement to work in teams, students also build good communication skills, presentation skills and even business writing skills. They also have to …

Energy And Climate Interactions In The Urban Environment, David J. Sailor

Mechanical and Materials Engineering Faculty Publications and Presentations

This presentation focuses on sustainable design choices and characteristics

Analysis Of Bimetallic Adhesion And Interfacial Toughness Of Kinetic Metallization Coatings, Alec D. Guraydin

Master's Theses

Due to their ability to confer enhanced surface properties without compromising the properties of the substrate, coatings have become ubiquitous in heavy industrial applications for corrosion, wear, and thermal protection, among others. Kinetic Metallization (KM), a solid-state impact consolidation and coating process, is well-suited for depositing industrial coatings due to its versatility, low substrate heat input, and low cost. The ability of KM coatings to adhere to the substrate is determined by the quality of the interface. The purpose of this study is to develop a model to predict the interfacial quality of KM coatings using known coating and substrate …

Creep, Fatigue And Creep-Fatigue Interactions In Modified 9% Cr - 1% Mo (P91) Steels, Valliappa Kalyanasundaram

Graduate Theses and Dissertations

Grade P91 steel, from the class of advanced high-chrome ferritic steels, is one of the preferred materials for many elevated temperature structural components. Creep-fatigue (C-F) interactions, along with oxidation, can accelerate the kinetics of damage accumulation and consequently reduce such components' life. Hence, reliable C-F test data is required for meticulous consideration of C-F interactions and oxidation, which in turn is vital for sound design practices. It is also imperative to develop analytical constitutive models that can simulate and predict material response under various long-term in-service conditions using experimental data from short-term laboratory experiments. Consequently, the major objectives of the …

Impedance Analysis Of Dielectric Nanoparticles Enabled Via A Self-Assembled Monolayer, Sasidhar Siddabattuni, Thomas P. Schuman, Vladimir Petrovsky, Fatih Dogan

Materials Science and Engineering Faculty Research & Creative Works

Impedance spectroscopy has been shown to be a powerful tool to investigate the dielectric characteristics of powders suspended in suitable liquids. The electrical and dielectrical contributions of different components of the slurry can be extracted from the impedance spectra through measurement of frequency-dependent relaxations. However, for ferroelectric powders that possess innate surface conductivity, such as BaTiO₃, nanoparticles have sufficient conductivity to exclude low frequency fields that preclude impedance characterization of the particle core. In this work, the slurry technique is shown to be effective for dielectric characterization of not only micrometer-sized particles through equivalent circuit modeling but also …

The Application Of Advanced Composites For The Construction Of Commercial Transport Aircraft, Mark D. Severson

Graduate Student Works

This individual Capstone project examined and evaluated current industry methods of testing, certification, and maintenance of advanced composite materials for the construction of commercial transport aircraft and the FAA regulations governing their use. The project critically compared and contrasted existing FAA standards and regulations governing the testing, certification, and maintenance of advanced composites for commercial transport aircraft structural applications with current industry practices to determine whether there were any areas of conflict between the two in order to accept or reject that current testing, certification, and maintenance procedures for advanced composites used in primary and secondary commercial transport aircraft structures …

Design And Fundamental Understanding Of Minimum Quantity Lubrication (Mql) Assisted Grinding Using Advanced Nanolubricants, Parash Kalita

Graduate Theses and Dissertations

Abrasive grinding is widely used across manufacturing industry for finishing parts and components requiring smooth superficial textures and precise dimensional tolerances and accuracy. Unlike any other machining operations, the complex thermo-mechanical processes during grinding produce excessive friction-induced energy consumption, heat, and intense contact seizures. Lubrication and cooling from grinding fluids is crucial in minimizing the deleterious effects of friction and heat to maximize the output part quality and process efficiency. The conventional flood grinding approach of an uneconomical application of large quantities of chemically active fluids has been found ineffective to provide sufficient lubrication and produces waste streams and pollutants …

An Experimentally Generated Constitutive Model For Peak Stress (Σ_Peak) In Compression Samples, Kevin Mathew Lopez Galang

Master's Theses

The hot working behavior of AISI 1018 steel was studied by hot-compression deformation tests on the Gleeble 1500 thermo-mechanical simulator at true strain values of -0.143 and -0.405, true strain rate values of 0.01 and 0.1, and working temperatures of 900^°C and 1000°C. The tests show that a lower working temperature and lower true strain value results in a greater maximum compressive force. The apparent activation energy Q_app was calculated by using the Zener-Hollomon parameter combined with the low stress law. Q_{app ­}was calculated to be 311 kJ mol^-1 K^-1.

Full Depth Reclamation: Bringing Developing Countries' Transportation Up To Speed, Sadie Smith

Civil Engineering Undergraduate Honors Theses

Often, a direct correlation is observed between a country’s transportation network and economic development. Evidence of this is observed all over the world. Full Depth Reclamation (FDR) is a roadway recycling technique that mills and mixes the existing roadway with a stabilizing agent and then re-compacts the mixture to create a thicker, stabilized pavement layer. This method is both cost effective and environmentally friendly, making it a very appealing option as the need to rehabilitate or increase the structural capacity of existing roads grows. In this study, the material characterization of FDR was examined as a composite material of both …

Strategic Electronic Property Control Of Self-Assembling Pyrazine-Acenes, Lacie Brownell

UNLV Theses, Dissertations, Professional Papers, and Capstones

Control of electronic properties in organic semiconductor materials is essential for electro-optical applications such as field-effect transistors, light-emitting diodes, and photovoltaic devices. This work is focused on two systems that highlight different approaches for the manipulation of electronic properties: (I) the development of electron-deficient (n-type) materials by selective lowering of E_LUMO and (II) low energy gap materials by controlling both E_LUMO and E_HOMO

To specifically lower E_LUMO, a pyrazine-acene π-platform was extended using electron-withdrawing moieties. These include: pyridine, pyrazine, and benzothiadiazole (system I). From the base pyrazine-acene, the most significant change in E_LUMO of …

Design And Testing Of Novel Mouthguard With Intermediate Nitinol And Foam Layers, Adam Kessler

UNLV Theses, Dissertations, Professional Papers, and Capstones

It is the aim of this study to investigate a novel mouthguard design that incorporates the use of a nickel-titanium (Nitinol) layer and thin foam layer in addition to EVA layers. It is thought that the Nitinol layer can distribute the force of an impact and that the thin foam layer may absorb this distributed force better than a solid EVA mouthguard of the same thickness. Rectangular, flat coupons representative of several mouthguard configurations were constructed for testing using an instrumented drop-weight impact tower. The coupon configurations include a control made of laminated EVA, a group of laminated EVA and …

Closed Loop Control Of A Cylindrical Tube Type Ionic Polymer Metal Composite (Ipmc), Benjamin Mead

UNLV Theses, Dissertations, Professional Papers, and Capstones

The goal of this research is to provide a framework for the integration of tube type, cylindrical Ionic Polymer Metal-Composite (IPMC) into conventional devices. IPMCs are one of the most widely used types of electro-active polymer actuator, due to their low electric driving potential and large deformation range. For this research a tube type IPMC was investigated. This IPMC has a circular cross section with four separate electrodes on its surface and a hole through the middle. The four electrodes allow for biaxial bending and accurate control of the tip location. One of the main advantages of using this type …

Longitudinally Graded Optical Fibers, Alexander Evert

All Theses

Described herein, for the first time to the best of our knowledge, are optical fibers possessing significant compositional gradations along their length due to longitudinal control of the core glass composition. More specifically, MCVD-derived germanosilicate fibers were fabricated that exhibited a gradient of up to about 0.55 weight percent GeO₂ per meter. These gradients are about 1900 times greater than previously reported for fibers possessing longitudinal changes in composition. The refractive index difference is shown to change by about 0.001, representing a numerical aperture change of about 10%, over a fiber length of less than 20 m. The lowest …

Improving R-Value In Brick Systems Using Various Pore-Forming Agents, Graham Shepherd

All Theses

Energy efficiency and energy savings are two topics that have continued to gain momentum over the last decade. This topic is extremely important when it comes to the construction of buildings and homes. Efforts have been ongoing to increase the insulation value of brick systems to hinder the conductive heat transfer through the material. The use of pore-forming agents (PFA’s) have been studied to increase the porosity within a ceramic system, through sacrificial burnout or place–holder method, which leave a residual, defined pore size distribution. This increase in porosity leads to better insulating capabilities and inherently lower conductivity values. In …

Glass-Clad Semiconductor Core Optical Fibers, Stephanie Morris

All Dissertations

Glass-clad optical fibers comprising a crystalline semiconductor core have garnered considerable recent attention for their potential utility as novel waveguides for applications in nonlinear optics, sensing, power delivery, and biomedicine.
As research into these fibers has progressed, it has become evident that excessive losses are limiting performance and so greater understanding of the underlying materials science, coupled with advances in fiber processing, is needed. More specifically, the semiconductor core fibers possess three performance-limiting characteristics that need to be addressed: (a) thermal expansion mismatches between crystalline core and glass cladding that lead to cracks, (b) the precipitation of oxide species in …