Materials Science and Engineering Commons^™

The Effect Of Gamma Radiation On Fibre Bragg Grating Sensors When Used As Radiation Dosimeters, Des Baccini

Theses : Honours

The effects of Gamma Radiation on Fibre Bragg Gratings (FBGs), when used as a radiation dosimeter, was proposed. The focus of this study centred on the FBG performance, and in particular the Bragg Wavelength Shift (BWS) whilst being exposed to ionizing radiation. Current research suggests that certain types of fibres manufactured by varying methods produce different results. The different responses to exposure from gamma irradiation between Germanium (Ge) doped optical fibres, with and without Hydrogen loading, along with the standard SMF-28 fibre with Hydrogen, were used and results noted and compared to previous work. The FBG’s in each fibre were …

Investigation Of Nbnx Thin Films And Nanoparticles Grown By Pulsed Laser Deposition And Thermal Diffusion, Ashraf Hassan Farha

Electrical & Computer Engineering Theses & Dissertations

Niobium nitride films (NbNx) were grown on Nb and Si (100) substrates using pulsed laser deposition (PLD), laser heating, and thermal diffusion methods. Niobium nitride films were deposited on Nb substrates using PLD with a Q-switched Nd: YAG laser (λ = 1064 nm, 40 ns pulse width, and 10 Hz repetition rate) at different laser fluences, different nitrogen background pressures and deposition temperatures. The effect of changing PLD parameters for films done by PLD was studied. The seen observations establish guidelines for adjusting the laser parameters to achieve the desired morphology and phase of the grown NbNx films.

When the …

Prediction Of The Thermomechanical Behavior Of Particle-Reinforced Metal Matrix Composites, Yi Hua, Linxia Gu

Department of Mechanical and Materials Engineering: Faculty Publications

The objective of this paper was to predict the thermomechanical behavior of 2080 aluminum alloy reinforced with SiC particles using the Mori–Tanaka theory combined with the finite element method. The influences of particle volume fraction, stiffness, aspect ratio and orientation were examined in terms of effective Young’s modulus, Poisson’s ratio and coefficient of thermal expansion (CTE) of the composite. The microstructure induced local stress and strain field was obtained through the numerical models of the representative volume element. Results suggested that particle volume fraction had significant impact on the effective Young’s modulus, Poisson’s ratio and CTE of the composite. Stiffer …

Infiltrated Composite Electrodes For Solid Oxide Fuel Cells, Aligul Buyukaksoy

Doctoral Dissertations

"Solid oxide fuel cells (SOFCs) are electrochemical devices which can convert chemical energy to electrical energy with efficiencies up to 60%. In order for SOFCs to be favorable energy conversion devices, the power obtained from a unit volume should be improved. This corresponds to minimized resistances from SOFC components (composite electrodes and electrolyte). Stability of the generated power is another important issue. Degradation of SOFCs with time due to microstructural processes or chemical reactions that occur at operating conditions; and due to reduction/oxidation cycles caused by the changes in the anode has been an important obstacle that has prevented the …

Review Of Anchorage Systems For Externally Bonded Frp Laminates, Stephen V. Grelle, Lesley Sneed

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

No abstract provided.

Recycling Of Electronic Waste: Printed Wiring Boards, Alex Luyima

Doctoral Dissertations

"Pyrolysis and leaching are the dominant techniques applied in the recycling of waste printed wiring boards (PWBs). Waste PWB pyrolysis is a highly polluting technology and produces brominated pyrolysis oils in addition to hydrogen bromide (HBr) gas. Moreover, leaching as a treatment process of waste PWBs is not well investigated. In this work, the pyrolysis of waste PWBs has been studied with the aim of reducing the amount of brominated oils and HBr gas evolved. The effects of powder inorganic chemicals (CaO, CaCO₃, Fe₂O₃, Al₂O₃, Y-Zeolite, and ZSM-5) additions on the pyrolysis of waste PWBs has been studied through experiments …

Effects Of Material Variables And Process Parameters On Properties Of Investment Casting Shells, Priyatham Tumurugoti

Masters Theses

"Manufacture of investment casting shells is a complex process. The choice of raw materials - refractory powders or grains, binders and additives - affects the properties of investment casting shells. In this study, different systems of shells were prepared, according to a design of experiments, with commercially available raw materials that differ in chemistry, particle size or particle size distribution. Shell strength was measured in green, fired and cooled, and hot conditions and the results were analyzed for strength-material property relation. Various microstructures of polished cross sections of these shells were characterized using scanning electron microscope. It was determined that …

On The Effect Of Silicon And Phosphorus During The Precipitation Of Κ-Carbide In Fe-Mn-Al-C Alloys, Laura Bartlett

Doctoral Dissertations

"Implementation of lightweight high manganese and aluminum steels for use in high energy absorbing applications requires a detailed knowledge of how alloying additions and impurities affect age hardening and high strain rate fracture properties. Dynamic fracture toughness is an important design criterion but has not been reported previously in these alloys. In addition, previous studies have shown that silicon and phosphorus increased the strength and aged hardness; however, the mechanism was unknown. This research mainly focuses on the effect of silicon and phosphorus on the precipitation of Κ-carbide and alloy partitioning during aging. Short range ordering, SRO, of Fe-Al-C into …

Processing, Microstructural Evolution And Electrochemical Performance Relationships In Solid Oxide Fuel Cells, Ayhan Sarikaya

Doctoral Dissertations

"The relationships between the processing parameters, microstructures and electrochemical performance of solid oxide fuel cell (SOFC) components were investigated. The operating regimes (i.e., reducing vs. oxidizing) as well as the elevated temperatures (e.g. 800°C) for their operation introduce several material challenges. Therefore, composite materials are employed to withstand operating conditions while providing sufficient electrochemical performance for fuel cell operation. Analyses on lanthanum-strontium manganite (LSM) - yttria stabilized zirconia (YSZ) compositions (45 vol%-55 vol%) by impedance spectroscopy demonstrated that two competing polarization mechanisms (i.e. charge-exchange and surface adsorption-diffusion of oxygen) limit performance. Optimization of microstructures resulted in total resistances as low …

Bioactive Glass Scaffolds For The Regeneration Of Load-Bearing Bone, Xin Liu

Doctoral Dissertations

"Biocompatible scaffolds that replicate the structure and function of bone would be ideal bone substitutes for structural bone loss, provided they have the requisite mechanical properties for reliable long-term loading. In this dissertation, strong porous scaffolds of silicate 13-93 bioactive glass, created with two different microstructures, were evaluated to determine their mechanical properties and their capacity to regenerate bone in a rat calvarial defect model. Scaffolds with an oriented microstructure of columnar pores were prepared by unidirectional freezing of camphene-based suspensions, followed by thermal annealing and sintering. By optimizing the freezing conditions, annealing time, and sintering temperature, constructs (porosity = …