Open Access. Powered by Scholars. Published by Universities.®

Materials Science and Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

2009

Discipline
Institution
Keyword
Publication
Publication Type
File Type

Articles 91 - 120 of 310

Full-Text Articles in Materials Science and Engineering

Redox State Of Polyaniline Nanodot And Its Coulomb Staircase Effect, Jian-Zhang Zhou, Shao-Huang Weng, Zhong-Hua Lin Aug 2009

Redox State Of Polyaniline Nanodot And Its Coulomb Staircase Effect, Jian-Zhang Zhou, Shao-Huang Weng, Zhong-Hua Lin

Journal of Electrochemistry

Polyaniline nanodot array had been fabricated in AAO template with potentiostatic method and the I~V characteristics of nanodots with different redox states were measured by conducting atomic force microscope (C-AFM) in atmosphere at room temperature. We found that only nanodots in partial oxidation state exhibit coulomb staircase in the I~V curves,while those in the full oxidation state and reduced state do not. The above phenomena were discussed preliminarily.

Go to article

Electrochemical Reduction Of Nitrobenzene In Different Ionic Liquids, Jun-Li Fan, Wei-Lin Ye, Rong Wang, Li-Qun Xu, Xia-Qin Wu Aug 2009

Electrochemical Reduction Of Nitrobenzene In Different Ionic Liquids, Jun-Li Fan, Wei-Lin Ye, Rong Wang, Li-Qun Xu, Xia-Qin Wu

Journal of Electrochemistry

Electrochemical reduction of nitrobenzene at glassy carbon electrode in different ionic liquids,such as N-methylimidazolium-p-toluene sulfonic acid ([Mim][PhSO3]) and ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate ([Bmim][PF6]) have been investigated by cyclic voltammetry. Experimental results showed that only a cathodic current peak was observed in [Mim][PhSO3],which is a diffusional controlled irreversible reaction. And two pairs of current peaks were obtained in [Bmim][PF6] in the same potential range,indicating showed that the reduction products of nitrobenzene were different in different ionic liquids.

Go to article

Electrochemical Studies On The Ionic Charge Transfer Properties Of The Oxygen Vacancy Defects In The Oxide Films Formed On Titanium, De-Sheng Kong, Hai-Yan Liu, Wen-Juan Fan, Wen-Hua Lv, Zhang-Yu Yu, Yuan-Yuan Feng Aug 2009

Electrochemical Studies On The Ionic Charge Transfer Properties Of The Oxygen Vacancy Defects In The Oxide Films Formed On Titanium, De-Sheng Kong, Hai-Yan Liu, Wen-Juan Fan, Wen-Hua Lv, Zhang-Yu Yu, Yuan-Yuan Feng

Journal of Electrochemistry

The ionic charge transfer properties of the oxygen vacancy point defects in TiO2 films formed on titanium were studied in 1.0 mol·L-1 HClO4 solution with cyclic voltammetry,potentiostatic polarization,galvanostatic reduction and capacitance measurements. The measured capacitance data were analyzed based on the Mott-Schottky equation and Einstein equation. Based on the different response times to the changes of the applied electric field between the ionic and the electronic charge transfers,the diffusion coefficient of the point defects in the anodic oxide film on titanium was estimated. It was shown that the passive potential region for titanium in 1.0 mol·L-1 …

Go to article

Composite Micro-Porous Polymer Electrolyte Of Pvdf-Hfp Modified By Mcm-48, Wei-Feng Wu, Chang-Chun Yang, Su-Jiao He, Bing-Bing Zhang, Song Xu Aug 2009

Composite Micro-Porous Polymer Electrolyte Of Pvdf-Hfp Modified By Mcm-48, Wei-Feng Wu, Chang-Chun Yang, Su-Jiao He, Bing-Bing Zhang, Song Xu

Journal of Electrochemistry

The composite micro-porous polymer electrolyte (CMPE) of PVDF-HFP modified by meso-porous molecular sieves of MCM-48 was prepared by phase-inversion process. The ionic conductivity and Li+ transference number of the polymer electrolyte were raised,respectively,by 97%(from 0.89 mS/cm to 1.75 mS/cm) and 39%(from 0.57 to 0.79),when 4%(by mass) MCM-48 was added in. Meanwhile,the crystallinity and electrochemical stability of the polymer electrolyte had not been changed by the addition of MCM-48. The charge-discharge efficiency of the button cell assembled with the composite membrane (Li/4%MCM-48-CMPE/LiFePO4) was 91% in the first cycle,and no loss of capacity was found even after 30 cycles. …

Go to article

Crystallization And Electrochemical Corrosion Behaviors Of Amorphous And Nanocrystalline Fe-Based Alloys, Xiang Li, Biao Yan, Peng Dong Aug 2009

Crystallization And Electrochemical Corrosion Behaviors Of Amorphous And Nanocrystalline Fe-Based Alloys, Xiang Li, Biao Yan, Peng Dong

Journal of Electrochemistry

In this study,amorphous Fe78Si13B9 and Fe73.5Si13.5B9Nb3Cu1 ribbons were prepared by the chill block melt-spinning process and nanocrystalline Fe73.5Si13.5B9Nb3Cu1 ribbons were obtained by annealing. The amorphous ribbons and their crystallization processes were identified by differential scanning calorimeter (DSC) and X-ray diffraction (XRD). A comparative study of the electrochemical corrosion behaviors of  Fe78Si13B9 and Fe73.5Si13.5B9Nb3Cu1 amorphous and nanocrystallized alloys was performed by linear polarization method …

Go to article

Strain Energy And Lateral Friction Force Distributions Of Carbon Nanotubes Manipulated Into Shapes By Atomic Force Microscopy, Mark C. Strus, Roya R. Lahiji, Pablo Ares, Vincente Lopez, Arvind Raman, Ron R. Reifenberger Aug 2009

Strain Energy And Lateral Friction Force Distributions Of Carbon Nanotubes Manipulated Into Shapes By Atomic Force Microscopy, Mark C. Strus, Roya R. Lahiji, Pablo Ares, Vincente Lopez, Arvind Raman, Ron R. Reifenberger

Other Nanotechnology Publications

The interplay between local mechanical strain energy and lateral frictional forces determines the shape of carbon nanotubes on substrates. In turn, because of its nanometer-size diameter, the shape of a carbon nanotube strongly influences its local electronic, chemical, and mechanical properties. Few, if any, methods exist for resolving the strain energy and static frictional forces along the length of a deformed nanotube supported on a substrate. We present a method using nonlinear elastic rod theory in which we compute the flexural strain energy and static frictional forces along the length of single walled carbon nanotubes (SWCNTs) manipulated into various shapes …

Go to article

Synthesis And Characterization Of Sulfur-Carbonnanotubes As Cathode Of Lithium/Sulfur Rechargeable Battery, Rui Du, Zhong-Zhi Yuan Aug 2009

Synthesis And Characterization Of Sulfur-Carbonnanotubes As Cathode Of Lithium/Sulfur Rechargeable Battery, Rui Du, Zhong-Zhi Yuan

Journal of Electrochemistry

A carbon-containing composite was synthesized by heating element sulfur and carbon nanotubes. The sulfur-carbonnanotube composites were characterized by X-ray diffraction, SEM, Brunauer-Emmett-Teller. The electrochemical property was characterized by cyclic voltammetry,constant current charge and discharge. It was revealed that the sulfur-carbonnanotube cathode 2016-type coin cells exhibited a good electrochemical property with the initial dicharge specific capacity up to 680 mAh/g and a stable capacity approximately 500 mAh/g after 30 cycle numbers.

Go to article

Capacitor Property Of Pani/Mwcnt Electrode In Li2So4 Solution, Wen-Bo Cong, Xiao-Shu He Aug 2009

Capacitor Property Of Pani/Mwcnt Electrode In Li2So4 Solution, Wen-Bo Cong, Xiao-Shu He

Journal of Electrochemistry

Polyaniline/multi-walled carbon nanotubes (PANI/MWCNT) composites synthesized by chemical oxidation method were characterized by scanning electron microscopy (SEM),X-ray diffraction (XRD) and IR techniques. In 1mol/L Li2SO4 neutral solution,the electrochemical performance of the composites electrode was investigated by cyclic voltammetry,galvanostatic charge-discharge tests and ac impedance spectroscopy. The results showed that the composites electrode performed well in 1mol/L Li2SO4 solution,the specific capacitance reached 412F/g at 5 mA/cm2. The composites electrode possessed better capability of high current than that of PANI electrode,the specific capacitance kept at 318 F/g at 50mA/cm2 and was 77.2% of that …

Go to article

Tungstate/Pertungstate System Cathodic Indirect Oxidation To Synthesis Hydrophobic Monascus Yellow Colorant, Wen-Jian Chen, Xue-Hong Huang, Zhen Chen, Sheng-Bo Ke, You-Zhen Lin Aug 2009

Tungstate/Pertungstate System Cathodic Indirect Oxidation To Synthesis Hydrophobic Monascus Yellow Colorant, Wen-Jian Chen, Xue-Hong Huang, Zhen Chen, Sheng-Bo Ke, You-Zhen Lin

Journal of Electrochemistry

Using SBS-g-(AA/StSO3Na)/SBS-g-DMAEMA Bipolar Membrane as a separator between the cathode and anode chambers in the electrolysis cell,the optimum conditions of deoxidization of oxygen in cathode were obtained through orthogonal experiment. Then using tungstate/pertungstate as media to indirect electrooxidate hydrophobic monascus red colorant to prepare hydrophobic monascus yellow colorant in cathode. The experiment results show the average current efficiency of cathode was up to 72.39% under the following conditions:that graphite as electrode,10% sulfuric acid as anode electrolyte,0.5 g·L-1 hydrophobic monascus red colorant solution as cathode electrolyte,tungstate concentration:15 mmol/L,pH=3,flow rate of oxygen:65 cm3/min,electrolyze 2 h under the …

Go to article

Electrocatalytic Oxidation Of Glucose On Cnt/Nanocrystlline Tio2-Pt Complex Film Electrode In Ionic Liquids, Dao-Bao Chu, Long-Wu Zha, Shu-Xi Wang, Jian Wang, Ying Xiao, Yuan-Yuan Hou, Jian-Guo He, Xue-Jiao Zhang Aug 2009

Electrocatalytic Oxidation Of Glucose On Cnt/Nanocrystlline Tio2-Pt Complex Film Electrode In Ionic Liquids, Dao-Bao Chu, Long-Wu Zha, Shu-Xi Wang, Jian Wang, Ying Xiao, Yuan-Yuan Hou, Jian-Guo He, Xue-Jiao Zhang

Journal of Electrochemistry

Using ionic liquid [EMI]BF4 as the electrolyte,the electrocatalytic oxidation of glucose on carbon nanotubes/nanocrystlline TiO2 film loaded on Pt (CNT/nanoTiO2-Pt) complex film electrode was investigated by cyclic voltammetry. The results found that the CNT/nanoTiO2-Pt complex electrode had high catalytic activity to the electrochemical oxidation of glucose in ionic liquids and the oxidation potential was -0.46 V. The best effect of glucose oxidation was obtained with the volume ratio of ionic liquid to water being 3:1. The process of electrodic reaction process was concentration polarization controlled.

Go to article

Electrochemical Properties Of Ru-P/Mwcnts-Dhp/Gc Electrode, Miao-Jing Chen, Bao-Yi Lu, Wen-Jie Mei, Hong Li Aug 2009

Electrochemical Properties Of Ru-P/Mwcnts-Dhp/Gc Electrode, Miao-Jing Chen, Bao-Yi Lu, Wen-Jie Mei, Hong Li

Journal of Electrochemistry

Electrochemical properties of a novel monoruthenated porphyrin [Ru(phen)2(MPyTMPP)Cl]+ (where phen =1,10-phenanthroline,MPyTMPP =5-(3-pyridyl)-10,15,20-tris-(4-methylphenyl) porphyrin) on a multi-walled carbon nanotubes (MWCNTs) modified glassy carbon (GC) electrode with the participation of dihexadecyl phosphate (DHP) have been investigated by using cyclic voltammetry,differential pulse voltammetry,UV-Visible spectroscopy and fluorescence spectroscopy. It is found that [Ru(phen)2(MPyTMPP)Cl]+ has the ability to adsorb strongly onto the MWCNTs-DHP modified GC electrode and exhibits a pair of redox waves controlled by surface electrochemical process. DHP dispersed on the MWCNTs/GC electrode can facilitate the ruthenium complex to adsorb onto the MWCNTs-DHP surface. A new complex is generated by the …

Go to article

Ellipsometric Study On Colored Electroplating Of Cuprous Oxide On Ni Substrate, Xue-Song Feng, Jing-Lei Lei, Ai-Xiang Chen, Wan-Shan Yin, Ling-Jie Li, Sha Zheng, Hui Zhao, Shao-Yan Pan Aug 2009

Ellipsometric Study On Colored Electroplating Of Cuprous Oxide On Ni Substrate, Xue-Song Feng, Jing-Lei Lei, Ai-Xiang Chen, Wan-Shan Yin, Ling-Jie Li, Sha Zheng, Hui Zhao, Shao-Yan Pan

Journal of Electrochemistry

The colored Cu2O coating was electroplated on Ni substrate to meet the decorative requirements. Results of X-ray photoelectron spectroscopy (XPS) indicate the coating consisting of Cu2O. Images of scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS) show that the Cu2O coating is smooth and uniform,and covers the Ni substrate wholly. Ellipsomtric measurements for Cu2O coatings with various electroplating time were carried out. Using a 4-layer model of "Air-Cu2O layer-interphase-Ni" ,the interphase was modeled with the graded effective medium approximation (EMA),the ellipsomtric data were deconvoluted and the Cu2O …

Go to article

Exploring Earth-Building Technology For Liberia., Isaac Dompo Mayon Aug 2009

Exploring Earth-Building Technology For Liberia., Isaac Dompo Mayon

Electronic Theses and Dissertations

This paper discusses earth as a building material and the extent to which earth building technology has evolved over the years. In particular it addresses the adobe, compressed and rammed earth techniques of earth building as suitable techniques for Liberia consumption. In addition, the paper investigates the suitability of the Latosols soils of Liberia for earth building construction purposes using standardized earth building principles and requirements. A local Johnson City, Tennessee, earth sample found to have the same physical characteristics of the Latosols of Liberia was used to simulate Liberia soils to produce specimen blocks at different configurations of moisture …

Go to article

Doppler Broadening Analysis Of Steel Specimens Using Accelerator Based In Situ Pair Production, V. Makarashvili, Douglas P. Wells, Ajit K. Roy Aug 2009

Doppler Broadening Analysis Of Steel Specimens Using Accelerator Based In Situ Pair Production, V. Makarashvili, Douglas P. Wells, Ajit K. Roy

Mechanical Engineering Faculty Research

Positron Annihilation Spectroscopy (PAS) techniques can be utilized as a sensitive probe of defects in materials. Studying these microscopic defects is very important for a number of industries in order to predict material failure or structural integrity. We have been developing gamma‐induced pair‐production techniques to produce positrons in thick samples ( ∼4–40 g/cm2, or ∼0.5–5 cm in steel). These techniques are called ‘Accelerator‐based Gamma‐induced Positron Annihilation Spectroscopy’ (AG‐PAS). We have begun testing the capabilities of this technique for imaging of defect densities in thick structural materials. As a first step, a linear accelerator (LINAC) was employed to produce photon beams …

Go to article

The Effects Of Pressure On Wide Bandgap Gan Semiconductors, William Kang, Linda Tran, Eunja Kim Aug 2009

The Effects Of Pressure On Wide Bandgap Gan Semiconductors, William Kang, Linda Tran, Eunja Kim

Undergraduate Research Opportunities Program (UROP)

Gallium nitride (GaN) is a group-III nitride semiconductor; which may prove useful in developing optical instruments that operate under high ambient pressures. The purpose of this project is to examine the properties of GaN under varying conditions. The methods used in this experiment consist of modeling free energy as a function of lattice constants; calculating bond lengths, bond strengths, and bulk moduli; and comparing the resultant data with values in published literature. We will also compare these results with experimental data drawn from x-ray diffraction scans. By doing so, we hope to determine whether gallium nitride is suitable for use …

Go to article

Functionally Graded Materials By Laser Metal Deposition, Syamala Rani Pulugurtha, Joseph William Newkirk, Frank W. Liou, Hsin-Nan Chou Aug 2009

Functionally Graded Materials By Laser Metal Deposition, Syamala Rani Pulugurtha, Joseph William Newkirk, Frank W. Liou, Hsin-Nan Chou

Materials Science and Engineering Faculty Research & Creative Works

Fabrication of functionally graded materials (FGMs) by laser metal deposition (LMD) has the potential to offer solutions to key engineering problems over the traditional metal-working techniques. But the issues that need to be addressed while building FGMs are intermixing in the layers and cracking due to the residual stresses. This paper is to present the study of the effect of process parameters (laser power and travel speed) on the degree of dilution between the substrate (or, previous layer) and powder material for few metallurgical systems.

Go to article

Evaluation Of Direct Diode Laser Deposited Stainless Steel 316l On 4340 Steel Substrate For Aircraft Landing Gear Application, Tian Fu, Todd E. Sparks, Frank W. Liou, Joseph William Newkirk, Zhiqiang Fan, Syamala Rani Pulugurtha, Jianzhong Ruan, Hsin-Nan Chou Aug 2009

Evaluation Of Direct Diode Laser Deposited Stainless Steel 316l On 4340 Steel Substrate For Aircraft Landing Gear Application, Tian Fu, Todd E. Sparks, Frank W. Liou, Joseph William Newkirk, Zhiqiang Fan, Syamala Rani Pulugurtha, Jianzhong Ruan, Hsin-Nan Chou

Mechanical and Aerospace Engineering Faculty Research & Creative Works

300M steel is used extensively for aircraft landing gears because of its high strength, ductility and toughness. However, like other high-strength steels, 300M steel is vulnerable to corrosion fatigue and stress corrosion cracking, which can lead to catastrophic consequences in the landing gear. Stainless steels offer a combination of corrosion, wear, and fatigue properties. But for an aircraft landing gear application a higher surface hardness is required. A laser cladding process with fast heating and cooling rates can improve the surface hardness. AISI 4340 steel is used as a lower cost alternative to 300M due to its similar composition. In …

Go to article

Increase Of Heat Transfer To Reduce Build Time In Rapid Freeze Prototyping, Ming-Chuan Leu, Sriram Praneeth Isanaka, Von Richards Aug 2009

Increase Of Heat Transfer To Reduce Build Time In Rapid Freeze Prototyping, Ming-Chuan Leu, Sriram Praneeth Isanaka, Von Richards

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Reduction of part build time in the Rapid Freeze Prototyping (RFP) process, which fabricates a 3D ice part layer-by-layer by depositing and freezing water droplets, has been achieved by increase of heat transfer. Three mechanisms have been experimentally investigated: 1) cooling the substrate, 2) use of forced convection, and 3) use of a chilling plate. Cooling the substrate is effective for parts of small heights but becomes ineffective with increase in part height. Forced convection produced desirable reduction in part build time but with the undesirable formation of frost on the built ice part. The use of chilling plate to …

Go to article

Development Of A Low Cost Handheld Microfluidic Phosphate Colorimeter For Water Quality Analysis, Sean C. Kaylor Aug 2009

Development Of A Low Cost Handheld Microfluidic Phosphate Colorimeter For Water Quality Analysis, Sean C. Kaylor

Master's Theses

This thesis describes the design, fabrication, and testing process for a microfluidic phosphate colorimeter utilized for water quality analysis. The device can be powered by, and interfaced for data collection with, a common cell phone or laptop to dramatically reduce costs. Unlike commercially available colorimeters, this device does not require the user to measure or mix sample and reagent. A disposable poly(dimethylsiloxane) (PDMS) microfluid chip, powered by an absorption pumping mechanism, was used to draw water samples, mix the sample at a specific ratio with a molybdovanadate reagent, and load both fluids into an onboard cuvette for colorimetric analysis. A …

Go to article

Short-Term Failure Analysis Of Aluminum Conducting Composite Core Transmission Lines, Brian Burks Aug 2009

Short-Term Failure Analysis Of Aluminum Conducting Composite Core Transmission Lines, Brian Burks

Electronic Theses and Dissertations

Recently the inefficiency and lack of capabilities of electric energy transmission have been put in the global spotlight; a transmission line design known as the Aluminum Conducting Composite Core Trapezoidal Wire (ACCC/TWTM) attempts to eliminate the deficiencies. The ACCC core is comprised of a new hybrid composite material. The most probable causes of short-term damage to the ACCC core were investigated through a series of finite element models. It was found that excessive bending was the most likely cause of short-term damage to the core. During bending of the ACCC core, stresses are concentrated at the interface in …

Go to article

Electrodeposition Of Nanocrystalline Ni-Based Alloys, Hanseung Park Aug 2009

Electrodeposition Of Nanocrystalline Ni-Based Alloys, Hanseung Park

All Theses

Nanocrystalline materials can often process superior properties, but they are generally unstable against grain growth. Addition of a dopant can stabilize nanocrystalline alloys by decreasing the excess grain boundary energy as the thermodynamic driving force for grain growth and reducing grain boundary mobility via a kinetic effect of solute drag. In this thesis study, eight Ni-based alloys (Ni-W, Ni-P, Ni-Mo, Ni-Cu, Ni-B, Ni-Mg, Ni-Zn and Ni-Co) and pure Ni were made using an electrodeposition method. It is concluded that the use of different dopant can drastically affect the deposition mechanism as well as the morphology of resultant films. Ni-W and …

Go to article

Colloidal Electroluminescence: Novel Routes To Controlled Emission Of Organic Light Emitting Diode Devices, Christopher Huebner Aug 2009

Colloidal Electroluminescence: Novel Routes To Controlled Emission Of Organic Light Emitting Diode Devices, Christopher Huebner

All Dissertations

In recent years the importance of the organic light emitting diode (OLED) has grown immensely, and the past two decades have seen ongoing and exhaustive research in organic routes to solid state lighting,
wherein electricity is directly converted into emitted light through an excited state relaxation mechanism. The benefits of incorporating polymeric and small molecule materials into solid state lighting devices include high efficiences, low production costs, amenability to large-scale production and devices, reduced environmental impact and low energy consumption. Herein are presented novel routes to materials engineering and preparation, device fabrication and emission tailoring through the abilility to form …

Go to article

Morphology Of Ingaas Multilayer Nanostructure On Gaas High-Index Surfaces, Yanze Xie Aug 2009

Morphology Of Ingaas Multilayer Nanostructure On Gaas High-Index Surfaces, Yanze Xie

Graduate Theses and Dissertations

This work aimed to explore nanostructure configuration by growing multiple layers of strained InGaAs on GaAs high index surface. The knowledge learned would help to achieve a comprehensive picture of strain-driven nanostructure evolution. Ordered arrays of InGaAs quantum dots were demonstrated on GaAs(311)B. The ordering patterns depended on the thickness of GaAs interlayer between InGaAs Quantum Dots (QDs). With an increased interfacial thickness, a transition from two dimensional (2D) lateral ordering to 1D dot chains was observed. InGaAs growth on GaAs(311)A and GaAs(331)A ended up with 1D quantum wires (QWRs). Straight InGaAs QWRs were uniformly distributed across the surfaces owing …

Go to article

Chameleon Coatings: Adaptive Surfaces To Reduce Friction And Wear In Extreme Environments, Christopher Muratore, Andrey A. Voevodin Aug 2009

Chameleon Coatings: Adaptive Surfaces To Reduce Friction And Wear In Extreme Environments, Christopher Muratore, Andrey A. Voevodin

Chemical and Materials Engineering Faculty Publications

Adaptive nanocomposite coating materials that automatically and reversibly adjust their surface composition and morphology via multiple mechanisms are a promising development for the reduction of friction and wear over broad ranges of ambient conditions encountered in aerospace applications, such as cycling of temperature and atmospheric composition. Materials selection for these composites is based on extensive study of interactions occurring between solid lubricants and their surroundings, especially with novel in situ surface characterization techniques used to identify adaptive behavior on size scales ranging from 10−10 to 10−4 m. Recent insights on operative solid-lubricant mechanisms and their dependency upon the ambient environment …

Go to article

Proton Irradiation Effects On Semiconductor Cdse/Zns Core/Shell Nanocrystals, Stephen Graham Charter Aug 2009

Proton Irradiation Effects On Semiconductor Cdse/Zns Core/Shell Nanocrystals, Stephen Graham Charter

Graduate Theses and Dissertations

The absorbance and photoluminescence measurement of semiconductor CdSe/ZnS core shell nanocrystals were reviewed and investigated after they were exposed to proton irradiation. The CdSe/ZnS core shell nanocrystals of 3.2nm and 4.4nm were commercially purchased and investigated. These nanocrystals were embedded in UV resin. Proton irradiation of energy 2MeV was applied at doses from 3 x 1013 protons cm-2 to 1.47 x 1015 protons cm-2 for both nanocrystal sizes. Absorbance measurements were conducted at 300K. Results from absorbance measurements showed slight broadening of the first exciton peak of both samples but was most noticeable in the 3.2nm nanocrystal sample. UV resin …

Go to article

Synthesis And Polymorphic Control For Visible Light Active Titania Nanoparticles, Sujaree Kaewgun Aug 2009

Synthesis And Polymorphic Control For Visible Light Active Titania Nanoparticles, Sujaree Kaewgun

All Dissertations

Titania (TiO2) is useful for many applications in photocatalysis, antimicrobials, pigment, deodorization, and decomposition of harmful organics and undesirable compounds in the air and waste water under UV irradiation. Among the three phases of TiO2, Rutile, Anatase, and Brookite, studies have been more focused on the anatase and rutile phases.
Pure brookite is the most difficult phase to prepare, even under hydrothermal conditions. Predominantly brookite phase TiO2 nanoparticles were prepared by the Water-based Ambient Condition Sol (WACS) process in our laboratory. The objectives of this research were to enhance visible light active (VLA) photocatalytic properties …

Go to article

51st Rocky Mountain Conference On Analytical Chemistry Jul 2009

51st Rocky Mountain Conference On Analytical Chemistry

Rocky Mountain Conference on Magnetic Resonance

Final program, abstracts, and information about the 51st annual meeting of the Rocky Mountain Conference on Analytical Chemistry, co-endorsed by the Colorado Section of the American Chemical Society and the Society for Applied Spectroscopy. Held in Snowmass, Colorado, July 19-23, 2009.

Go to article

Dislocation-Particle Interaction At Elevated Temperatures, Rajiv S. Mishra Jul 2009

Dislocation-Particle Interaction At Elevated Temperatures, Rajiv S. Mishra

Materials Science and Engineering Faculty Research & Creative Works

There is a major difference in dislocation-particle interaction at low and elevated temperatures. This article will only discuss the historic development of and the current understanding of the interaction of dislocations with non-shearable particles at elevated temperatures. It will show that the understanding of repulsive-attractive transition in dislocation-particle interaction at elevated temperatures has undergone remarkable change and is at a level where a physics-Based high-temperature strengthening framework can be developed. © TMS 2009.

Go to article

Design And Development Of Rapid Battery Exchange Systems For Electric Vehicles To Be Used As Efficient Student Transportation, Jonathan A. Bevier Jul 2009

Design And Development Of Rapid Battery Exchange Systems For Electric Vehicles To Be Used As Efficient Student Transportation, Jonathan A. Bevier

Master's Theses

Rapid battery exchange systems were built for an electric van and pedal assist electric bike as a method of eliminating the need to recharge the vehicles batteries in order to increase the feasibility of using electric propulsion as a method of efficient student transportation. After selecting proper materials it was found that the systems would need a protective coating to ensure consistent operation. 1020 cold rolled steel samples coated with multiple thicknesses of vinyl resin paint, epoxy resin paint, and powder coating were subjected to environmental wear tests in order to determine if the type and thickness of common protective …

Go to article

Effect Of Electron Donor On Pe Polymerization, A Thongdonjui, W Trakarnpruk, R H. Strauss Jul 2009

Effect Of Electron Donor On Pe Polymerization, A Thongdonjui, W Trakarnpruk, R H. Strauss

Journal of Metals, Materials and Minerals

Ziegler-Natta catalyst was prepared from colloidal MgCl2 (from reaction between magnesium ethyl carbonate and aluminium sesquichloride, Al2Et3Cl3) followed by contact with TiCl4. Al/Mg and Ti/Mg molar ratios were studied as parameters affecting the catalyst synthesis. Catalytic performance and effect of electron donor on ethylene polymerization were investigated. Results showed that addition of electron donor (ethyl benzoate) increased activity balance when polymerizations were performed under hydrogen pressure of 1 bar and 3 bars. The morphology of the polymer can be improved while fine content of the polymer was reduced by addition of dicyclopentyl dimethoxysilane. A productivity of 17.3 and 15.0 kg …

Go to article

First Prev Next Last