Open Access. Powered by Scholars. Published by Universities.®

Materials Science and Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

2009

Discipline
Institution
Keyword
Publication
Publication Type
File Type

Articles 31 - 60 of 310

Full-Text Articles in Materials Science and Engineering

Synthesis And Characterization Of Silicon-Silicon Carbide Composites From Rice Husk Ash Via Self-Propagating High Temperature Synthesis, S Niyomwas Dec 2009

Synthesis And Characterization Of Silicon-Silicon Carbide Composites From Rice Husk Ash Via Self-Propagating High Temperature Synthesis, S Niyomwas

Journal of Metals, Materials and Minerals

Silicon-Silicon Carbide (Si-SiC) composites were synthesized by self-propagating high temperature synthesis (SHS) from a powder mixture of rice husk ash (RHA)-C-Mg. The reaction was carried out in a SHS reactor under static argon gas at a pressure of 0.5 MPa. The standard Gibbs energy minimization method was used to calculate the equilibrium composition of the reacting species. The comparison of silica from RHA and commercial sources in the precursor mixture on the Si-SiC conversion has investigated using X-ray diffraction and scanning electron microscope technique. The as-synthesized products of Si-SiC-MgO powders were leached with 0.1M HCl acid solution to obtain the …

Go to article

Utilization Of Rice Husk Ash Silica In Controlled Releasing Application, P Prawingwong, C Chaiya, P Reubroycharoen, C Samart Dec 2009

Utilization Of Rice Husk Ash Silica In Controlled Releasing Application, P Prawingwong, C Chaiya, P Reubroycharoen, C Samart

Journal of Metals, Materials and Minerals

Mesoporous silica was produced by sol-gel technique using rice husk ash as a silica source which was applied in the drug delivery system. The drug releasing behavior was studied in phosphate buffer using indigo carmine as a drug model. The textural properties of mesoporous silica were characterized and considered with the result of the releasing study. The pore volume and silanol group on the surface of mesoporous silica affected the releasing behavior. The larger pore volume could contain the larger amount of drug which showed fast release. The effect of the silanol group presented an interaction between the drug molecule …

Go to article

Preparation And Characterization Of Silicon From Rice Hulls, E Swatsitang, M Krochai Dec 2009

Preparation And Characterization Of Silicon From Rice Hulls, E Swatsitang, M Krochai

Journal of Metals, Materials and Minerals

High purity silica can be prepared by reflux raw rice hulls in 1 N HCl for 45 minutes first, then pyrolyzed at 650°C for 3 hours in O2 atmosphere. The obtained white ash was examined by XRD showing a broad peak of amorphous silica at 2 theta = 22 degree. Silicon can be prepared by metallothermal reduction of pure silica at 650°C in Ar atmosphere for 1-3 hours, using magnesium (99% purity) as a reducing agent. High purity silicon (99.98 %) can be obtained by subsequently washing the as-reduced silica with HCl: H2O and HF: H2O solutions. The results from …

Go to article

Simpler Packaging, Tomiko Oden Dec 2009

Simpler Packaging, Tomiko Oden

Graphic Communication

This project explains how product packaging is become more "green", and thus more simple. Packaging needs to go beyond just simplifying materials and graphics - it needs to create a simpler process in order to reduce wasted time, energy, and resources.

Go to article

Investigation Of The Thermoelectric Behavior And Structure Formation Of (Pbte/Agsbte2)-Silver Chalcogenide Mixtures, Yisha Wang Dec 2009

Investigation Of The Thermoelectric Behavior And Structure Formation Of (Pbte/Agsbte2)-Silver Chalcogenide Mixtures, Yisha Wang

All Theses

Sustainable energy research is currently on the forefront of scientific exploration and energy conservation and the development of new energy production techniques are both crucial for our long lasting stable future. Accordingly, thermoelectric materials will be a significant energy conservation and production source. The state-of -the-art thermoelectric materials can be used to collect the wasted heat and converted to power, which is the future for the green power generation.
PbTe is considered a state-of-the-art thermoelectric material, which has been extensively studied. It forms in the NaCl structure and it is a semiconductor with a room temperature gap value of 0.29 …

Go to article

Mechanical And Chemical Characterization Of Biological Composite Structures, Bonnie Zimmerman Dec 2009

Mechanical And Chemical Characterization Of Biological Composite Structures, Bonnie Zimmerman

All Theses

A better understanding of the bioresponse of naturally occurring systems will help
to optimize the engineering of synthetic biomaterials. The aim of this thesis was to
characterize the mechanical and chemical behavior of two distinct biological composite
systems, human teeth and wool fibers. These mechanical and chemical properties were
also studied as a function of natural structure and environmental conditions.
Human teeth are composite systems consisting primarily of hydroxylapatite and
protein. This project investigated how the use of clinical dental treatments and
procedures, such as whitening and etching, affects mechanical properties. Analysis of
nanoindentation with the Oliver-Pharr model provided elastic …

Go to article

Nucleation And Growth Behavior Of Tellurite-Based Glasses Suitable For Mid-Infrared Applications, Jonathan Massera Dec 2009

Nucleation And Growth Behavior Of Tellurite-Based Glasses Suitable For Mid-Infrared Applications, Jonathan Massera

All Dissertations

Optical fibers transmitting in the 2-5 μm mid-infrared (MIR) spectral region are highly desirable for a variety of military and civilian applications including super-continuum generation, infrared countermeasures (IRCM), and MIR laser sources. These new applications in the mid-infrared require novel optical materials that transmit in this window and can be fabricated into fiber. As tellurite glasses are known to have good transparency in the (NIR) region, tellurite-based glasses are the material of choice for this study due to their high linear and nonlinear refractive index, their low glass transition temperature and the ability to form them into optical fiber.
This …

Go to article

Production And Characterization Of Novel Shaped Fibers For Fluid Sorption And Transport, Lisa Fuller Dec 2009

Production And Characterization Of Novel Shaped Fibers For Fluid Sorption And Transport, Lisa Fuller

All Dissertations

This work investigated the production and characterization of novel shaped fibers for fluid adsorption and transport. Shaped fibers such as Y, H, and octolobal, as well as conventional round fibers, were extruded using a research melt extruder. The fibers were extruded from 18 melt flow index (MFI) polypropylene (PP) and blends of 18 MFI PP and 400 MFI PP. Hydrophilic spin finish Bozzetto Favorol SF2 was applied to the surface of extruded fibers and hydrophilic polyester additive LB-100 was included in the blend of some H fibers to increase the hydrophilicity of the fiber surface. The geometric shape retention of …

Go to article

Electrooxidation Of Formic Acid On Pd-Ni Alloy Film Electrode-The Effect Of Dealloying, Chao Wang, Fei-Fei Shi, Jin-Yi Wang, Han-Xuan Zhang, Wen-Bin Cai Nov 2009

Electrooxidation Of Formic Acid On Pd-Ni Alloy Film Electrode-The Effect Of Dealloying, Chao Wang, Fei-Fei Shi, Jin-Yi Wang, Han-Xuan Zhang, Wen-Bin Cai

Journal of Electrochemistry

A Pd-Ni alloy film was electrodeposited on Au disc electrode at a constant potential from a weakly basic bath containing PdCl2,NiSO4 and ethylenediamine.The as-deposited film was then subjected to potential cycling in a perchloric acid solution for surface dealloying treatment.The dealloyed Pd-Ni film electrode was examined for the electrocatalytic oxidation of formic acid,and compared with the as-deposited one as well as a Pd film electrode.The FE-SEM and electrochemical measurements on the Pd-Ni films revealed that the dealloying treatment caused a surface roughening and an increase in specific surface reaction area.The ICP-AES and XPS analyses demonstrated that the …

Go to article

Electrocatalytic Performance Of Carbon Supported Ir Catalysts With Different Ir Loadings For Ammonia Oxidation, Yu-Zhi Jiang, Qing-Mei Kong, Tian-Hong Lu, Yi-Ming Zhou, Ya-Wen Tang Nov 2009

Electrocatalytic Performance Of Carbon Supported Ir Catalysts With Different Ir Loadings For Ammonia Oxidation, Yu-Zhi Jiang, Qing-Mei Kong, Tian-Hong Lu, Yi-Ming Zhou, Ya-Wen Tang

Journal of Electrochemistry

The electrocatalytic performance of the Ir/C catalyst as the anodic catalyst in the amperometric and electrochemical NH3 sensor was investigated.The experimental results illustrated that in the NaClO4 neutral electrolyte,the electrocatalytic performance of the Ir/C catalyst for the NH3 oxidation is related to the Ir loading in the Ir/C catalyst.Among the Ir/C catalysts with different Ir loading,the best electrocatalytic activity,stability and sensitivity were achieved by the Ir/C catalyst with 10% Ir loadings.In addition,the current densities of the NH3 oxidation at the Ir/C catalysts with the different Ir loadings were linearly proportional to the NH3 concentration.The Ir/C …

Go to article

Cyclic Voltammetric And In-Situ Ftir Spectroscopic Studies Of Adsorption And Reduction Of No On Electrode Of Pt Nanoparticles, Qian Cheng, Yan-Xia Jiang, Dong-Mei Zeng, Shi-Gang Sun Nov 2009

Cyclic Voltammetric And In-Situ Ftir Spectroscopic Studies Of Adsorption And Reduction Of No On Electrode Of Pt Nanoparticles, Qian Cheng, Yan-Xia Jiang, Dong-Mei Zeng, Shi-Gang Sun

Journal of Electrochemistry

Adsorption and reduction of NO on electrode of Pt nanoparticles in acid solutions were studied by means of cyclic voltammetry(CV) and in-situ FTIR spectroscopy.The results indicated that the reduction of NO is a complicated process including the adsorption of NO on electrode surface.Two types of surface-bonded NO were determined on Pt nanoparticles.The weakly adsorbed NO was reduced between 0.6 V and-0.05 V,which yielded nitrous oxide(N2O) and ammonium(NH4+) as products;while the strongly bonded NO was reduced at more negative potentials between-0.05V and-0.15V,producing only NH4+ species.

Go to article

Synthesis Of α-Mno2 Microspheres For The Application In Supercapacitor, Liang Wang, Gui-Chang Liu, Zhi-Cong Shi Nov 2009

Synthesis Of α-Mno2 Microspheres For The Application In Supercapacitor, Liang Wang, Gui-Chang Liu, Zhi-Cong Shi

Journal of Electrochemistry

The MnO2 microspheres were prepared through the oxidation of KMnO4 and MnCO3 microspheres precursor.The microstructure and supercapacitor properties of MnO2 were characterized by XRD,SEM and CV.The results show that MnO2 was in a poorly crystalline state with α-crystallographic form,the size of microspheres typically ranged from 0.5 to 2 μm.Loading 5 mg·cm-2 MnO2 microspheres had excellent capacitance behaviors in 2 mol·L-1(NH4)2SO4 solution.The specific capacitance was 135.6 F·g-1 with the scan rate at 2 mV·s-1,and 118.8 F·g-1 with the large scan rate at 100 …

Go to article

Indirect Electrosynthesis Of Double Aldehyde Starch Using Pb-(Bro3-/Br-) As Electro-Catalytic Mediator, Ni-Na Chen, Ri-Yao Chen, Xi Zheng, Xiao Chen, Zhen Chen Nov 2009

Indirect Electrosynthesis Of Double Aldehyde Starch Using Pb-(Bro3-/Br-) As Electro-Catalytic Mediator, Ni-Na Chen, Ri-Yao Chen, Xi Zheng, Xiao Chen, Zhen Chen

Journal of Electrochemistry

In this paper,Nafion membrane was used as the separator in the electrolysis cell to indirectly electro-generating the double aldehyde starch(DAS) with BrO3-/Br-as a redox mediator and Pb as an anode.Effects of temperature,concentration of sulfuric acid and starch on the electro-oxidation of DAS were discussed.The steady state polarization curves were obtained.The experiment results showed that the current efficiency was over 50% when the electrolysis current density was 15mA/ cm2.

Go to article

Progresses In Electrocatalysis Of Nanomaterials—Tuning The Surface Structure And Property Of Electrocatalysts, Yan-Xia Jiang, Na Tian, Zhi-You Zhou, Sheng-Pei Chen, Shi-Gang Sun Nov 2009

Progresses In Electrocatalysis Of Nanomaterials—Tuning The Surface Structure And Property Of Electrocatalysts, Yan-Xia Jiang, Na Tian, Zhi-You Zhou, Sheng-Pei Chen, Shi-Gang Sun

Journal of Electrochemistry

The property of an electrocatalyst depends strongly on its surface structure.The study of surface structure-catalytic functionality is the base of design and preparation of electrocatalysts of high activity,high stability and high selectivity at microstructure level.In this paper,based mainly on our results concering hydrogen and oxygen adsorption-desorption,ethylene glycol oxidation and CO2 reduction,the research progresses in tuning the surface structure and property of electrocatalysts are summarized.This paper overviews firstly the cyclic voltammetric characteristics,electrocatalytic properties of platinum single crystal planes lying on different crystallographic zones of the unit stereographic triangle of face-centered cubic(fcc) metals.Next,the innovation of electrochemical methods to control the surface …

Go to article

Synthesis And Electrocatalytic Properties Of Ni-Pd/C Catalysts With Pd-Enriched Surface, Yu-Mei Chen, Zhi-Xiu Liang, Sheng-Li Chen Nov 2009

Synthesis And Electrocatalytic Properties Of Ni-Pd/C Catalysts With Pd-Enriched Surface, Yu-Mei Chen, Zhi-Xiu Liang, Sheng-Li Chen

Journal of Electrochemistry

The Ni-Pd alloy catalysts with Pd-enriched surface were synthesized through a modified polyol process.The synthesized materials were investigated by XRD and electrochemical methods,and tested as electrocatalysts for CH3OH-tolerant oxygen reduction.The results indicated that the synthesized Ni-Pd nanoparticles possess multiple phases containing Pd-Ni alloy and pure Ni.Comparing with Pd/C,the prepared Ni-Pd/C nanoparticles exhibited better resolved voltammetric peaks between the hydrogen absorption and adsorption,and positively shifted current peaks for the reduction of Pd oxide.The prepared Ni-Pd alloys with Pd-enriched surface have significantly enhanced ORR activity and improved CH3OH tolerance as comparing with Pd/C catalysts.

Go to article

Complex Reduction Preparation Of Carbon Supported Pd Nanoparticle Catalyst And Its Electrocatalysis For Formic Acid Oxidation, Wei He, Yong-Yin Kang, Chong Du, Zhi-Qing Zou, Xiao-Gang Zhang, Hui Yang Nov 2009

Complex Reduction Preparation Of Carbon Supported Pd Nanoparticle Catalyst And Its Electrocatalysis For Formic Acid Oxidation, Wei He, Yong-Yin Kang, Chong Du, Zhi-Qing Zou, Xiao-Gang Zhang, Hui Yang

Journal of Electrochemistry

A simple procedure involved the complexing of PdCl2 with sodium citrate followed by ethylene glycol reduction has been employed for the preparation of carbon-supported Pd nanoparticles(Pd/C).The XRD and TEM characterizations indicate that Pd nanoparticles with a small particle size were well-dispersed on carbon support.The mean particle sizes of the Pd/C catalysts were found to be increased from 2.7 to 5.8 nm with heat-treatments at different temperature.The mass activity of the Pd/C catalyst for formic acid electrooxidation increased with the decrease in Pd particle size.However,the specific activity increased with Pd particle size.Furthermore,the Pd/C catalyst with a particle size of ca.3.6 …

Go to article

Research Progress Of Synergistic Effect Of Metal Oxides On Pt-Based Catalysts, Hui-Ping Yuan, Xun Guo, Xin-Ping Qiu, Wen-Tao Zhu, Li-Quan Chen Nov 2009

Research Progress Of Synergistic Effect Of Metal Oxides On Pt-Based Catalysts, Hui-Ping Yuan, Xun Guo, Xin-Ping Qiu, Wen-Tao Zhu, Li-Quan Chen

Journal of Electrochemistry

In this paper,the work of Pt-based catalysts modified by metal oxides as the anode catalysts of direct methanol fuel cell(DMFC) is reviewed.The relationship between the structure and the composition of the catalysts and the reaction mechanism,exiting problems and developing direction are discussed.

Go to article

Electrocatalysis In Polymer Electrolyte Membrane Fuel Cells, Li Li, Si-Guo Chen, Xue-Qiang Qi, Yao-Qiong Wang, Meng-Bo Ji, Lan-Lan Li, Zi-Dong Wei Nov 2009

Electrocatalysis In Polymer Electrolyte Membrane Fuel Cells, Li Li, Si-Guo Chen, Xue-Qiang Qi, Yao-Qiong Wang, Meng-Bo Ji, Lan-Lan Li, Zi-Dong Wei

Journal of Electrochemistry

This review presents the study of Chongqing University in electrocatalysis for polymer electrolyte membrane fuel cells(PEMFCs).Based on the understanding to the performance degradation of PEMFCs' catalysts,the university has being concentrated on how to increase the activity,stability and utility of noble metal catalysts.It covers the molecular design of near-surface alloy catalysts for improvement of activity to oxygen reduction reaction(ORR) and resistance to foreign poison species,selective deposition of Pt on the so-called "three-phase interface" for a high Pt utility,and invention of anti-flooding electrode against water flooding in the catalyst layer of the membrane assemble electrode(MEA),and so on.The catalytic mechanism of electrode reactions …

Go to article

Highly Durable Pt/Ruo2/C Catalyst For The Cathode Of Direct Methanol Fuel Cells, Chun-Yu Du, Tao Dong, Ge-Ping Yin, Peng-Fei Shi Nov 2009

Highly Durable Pt/Ruo2/C Catalyst For The Cathode Of Direct Methanol Fuel Cells, Chun-Yu Du, Tao Dong, Ge-Ping Yin, Peng-Fei Shi

Journal of Electrochemistry

Instability of the carbon-supported Pt(Pt/C) catalyst at the cathode is one of the key technical challenges for the development of Direct Methanol Fuel Cells(DMFCs).In this paper,an efficient approach to enhancing the stability of the cathode catalyst was explored by designing and synthesizing a novel nanocomposite support,RuO2 coated carbon black(RuO2/C).Firstly,a wet chemical method was employed to synthesize the RuO2/C nanocomposite,from which Pt/RuO2/C catalyst was further prepared by a microwave method.The morphology and crystalline structure of the RuO2/C support and Pt/RuO2/C catalyst were then characterized by TEM and XRD.Finally,the electrochemical performance …

Go to article

Preparation Of Pt Nanoflower/Zno Composites Arrays And Their Electrocatalysis For Methanol Oxidation, Li Gao, Yi-Feng E, Lou-Zhen Fan Nov 2009

Preparation Of Pt Nanoflower/Zno Composites Arrays And Their Electrocatalysis For Methanol Oxidation, Li Gao, Yi-Feng E, Lou-Zhen Fan

Journal of Electrochemistry

The Pt nanoflower/ZnO(PtNF/ZnO) nanorod composites arrays were electrochemically prepared by controlling the hydrophobicity and the hydrophilicity of ZnO nanorods arrays.The Pt nanoflowers grew on the tip of ZnO nanorods,which maintain the vertical array of Zno nanorods with a high degree of size uniformity and high surface area.Compared with Pt nanoparticle covered ZnO nanorod arrays,which were prepared by controlling the hydrophilicities of ZnO nanorods and Pt nanoparticles,the PtNF/ZnO displayed highest electrocatalytic activities for the oxidation of methanol.

Go to article

Electrocatalysis Of Myoglobin-Chitosan-Au Colloid Film Modified Glass Carbon Electrode, Yu-Hua Qin, Jun Guo, Hui Xu, Li-Heng Zhou, Sheng-Tian Wang Nov 2009

Electrocatalysis Of Myoglobin-Chitosan-Au Colloid Film Modified Glass Carbon Electrode, Yu-Hua Qin, Jun Guo, Hui Xu, Li-Heng Zhou, Sheng-Tian Wang

Journal of Electrochemistry

The cyclic voltammgram of Mb/AAO/Au Colloid/GCE shows a pair of well-defined and nearly reversible peaks at about-0.20 V(vs.Ag/AgCl) in 0.1 mol/L NaAc-HAc buffer(pH = 5.4),being the characteristic peaks of the Mb heme Fe(Ⅲ) / Fe(Ⅱ)redox couples.The electron transfer between Mb and the electrode was greatly enhanced under present testing conditions.The effects of scan rate,pH and buffers concentration on the electrochemical behaviors of Mb were studied in detail.Position of the Soret absorbance band suggested that Mb in chitosan-colloidal gold hept its secondary structure similar to the native states.Oxygen was catalytically reduced by Mb in chitosan-colloidal gold films.

Go to article

Enhanced Visible Light Photoelectrochemical Performances With Nitrogen Doped Tio2 Nanowire Arrays, Xiao-Jun Lv, Yue-Ming Li, Hao Zhang, Da Chen, Jennifer Hensel, Jin Z Zhang, Jing-Hong Li Nov 2009

Enhanced Visible Light Photoelectrochemical Performances With Nitrogen Doped Tio2 Nanowire Arrays, Xiao-Jun Lv, Yue-Ming Li, Hao Zhang, Da Chen, Jennifer Hensel, Jin Z Zhang, Jing-Hong Li

Journal of Electrochemistry

Self-organized anodic anatase TiO2 nanowire arrays doped with nitrogen have been successfully fabri-cated and their photoelectrochemical(PEC) properties have been characterized and found to be substantially im-proved compared to undoped nanowires or commercial P25 nanoparticles.Photocurrent measured with monochro-matic incident light showed that the incident photon-to-current efficiency(IPCE,%) values of nanowire arrayelectrodes with or without N-doping were obviously higher than that of commercial P25 nanoparticle electrodes,and nitrogen-doped TiO2 nanowire arrays(NTNA) had noticeable absorption in the visible region.The NTNAelectrodes showed the highest photocurrent density and power conversion efficiency under 100 mW/cm2 visiblelight illumination.A maximumolphotoconversion efficiency of 0.52% was achieved for the …

Go to article

Electrocatalytic Activities Of Au-Mmni(3.2)Al(0.2)Mn(0.6)Co(1.00) For Borohydride Oxidation, Gui-Ling Wang, Jin-Cheng Liu, Ke-Ning Sun, Dian-Xue Cao Nov 2009

Electrocatalytic Activities Of Au-Mmni(3.2)Al(0.2)Mn(0.6)Co(1.00) For Borohydride Oxidation, Gui-Ling Wang, Jin-Cheng Liu, Ke-Ning Sun, Dian-Xue Cao

Journal of Electrochemistry

In this work,the electrocatalytic activities of MmNi3.2Al0.2Mn0.6Co1.0, NaOH treated MmNi3.2Al0.2Mn0.6Co1.0 and Au-MmNi3.2Al0.2Mn0.6Co1.0 obtained after NaOH treatment(Mm: misch metal) for NaBH4 oxidation were reported. The electrodes were prepared by electrodeposition, their morphologies were analysized by SEM, their electrocatalytic properties were studied by the linear sweeping test. It was found that the oxidation current density of the Au-MmNi3.2Al0.2Mn0.6Co1.0 was 60 mA·cm-2, it was 3.5 times higher than that at the …

Go to article

Preparation Of Polyaniline/Polyester Conductive Fabric Via In-Situ Polymerization, Fang Na, Wei Wang Nov 2009

Preparation Of Polyaniline/Polyester Conductive Fabric Via In-Situ Polymerization, Fang Na, Wei Wang

Journal of Electrochemistry

The formation of PANI coating on the surface of PET fiber and fabric was obtained by in-situ polymerization method.The coating′s thickness was about 1～2 μm.Orthogonal test methodology was used to analyze the main factors of preparation of PANI / PET conductive fabric.The effects of the aniline monomer concentration,oxidant: aniline molar ratio,doping acid concentration and types,reaction time on the conductivities of the fabric were studied.The structure of the polymer were characterized by SEM,FTIR and XRD.The results indicated that there was uniform and continuous polyaniline film on the surface of polyester fabric.The contents of oxidation and reduction of polyaniline molecular chain structure …

Go to article

Platinum Modified With Hydrogen Molybdenum/Tungsten Bronze As Electrocatalysts For Direct Small Organic Molecule Fuel Cell, Wei-Shan Li, Li-Peng Tian, Jun-Hua Du, Hong-Liang Huang, Wei Li, Li-Xia Zhang, Hong-Yan Yang, Pan-Pan Guo, Zhi-Hui Zhou, Xing-De Xiang, Zhao Fu Nov 2009

Platinum Modified With Hydrogen Molybdenum/Tungsten Bronze As Electrocatalysts For Direct Small Organic Molecule Fuel Cell, Wei-Shan Li, Li-Peng Tian, Jun-Hua Du, Hong-Liang Huang, Wei Li, Li-Xia Zhang, Hong-Yan Yang, Pan-Pan Guo, Zhi-Hui Zhou, Xing-De Xiang, Zhao Fu

Journal of Electrochemistry

There are several problems that limit the application of direct small organic fuel cell,including the use of precious platinum and the activity loss of platinum due to the intermediates poisons from the oxidation of small organic molecules.These problems have attracted wide interest and many solutions have been proposed.We have developed a new method to reduce the platinum usage and improve its activity,based on the modification of platinum with hydrogen molybdenum/tungsten bronze(HxMo(W)O3) was reviewed.

Go to article

Enhanced [Ru(Bpy)3]2+-Mediated Oxidation Of Guanine Prompted By Dhp, Bao-Lian Zhang, Wei Hong, Bao-Yi Lu, Hong Li Nov 2009

Enhanced [Ru(Bpy)3]2+-Mediated Oxidation Of Guanine Prompted By Dhp, Bao-Lian Zhang, Wei Hong, Bao-Yi Lu, Hong Li

Journal of Electrochemistry

The effects of dihexadecyl phosphate(DHP) and multi-walled carbon nanotubes(MWNTs) on the oxidation of guanine mediated by[Ru(bpy)3]2+ on the ITO electrode have been investigated by cyclic voltammetry and differential pulse voltammetry.The results showed that [Ru(bpy)3]2+ can mediate the oxidation.In the range from 0.01 to 0.15 mmol·L-1,peak currents for guanine oxidation mediated by [Ru(bpy)3]2+ increased with the rise of DHP concentrations.On the contrary,cationic surfactant HTAC has the ability to weaken the mediated oxidation of guanine.In addition,the oxidative mechanism of guanine mediated by [Ru(bpy)3]2+ with the participation of DHP …

Go to article

Aligned Nanotubule Membranes, Bruce J. Hinds Iii Nov 2009

Aligned Nanotubule Membranes, Bruce J. Hinds Iii

Chemical and Materials Engineering Faculty Patents

A method is provided for producing a permeable membrane, comprising the steps of aligning a plurality of hollow nanotubules to form a mat, coating the mat with a continuous polymer matrix to form a membrane. The membrane is etched (a) to open the plurality of hollow nanotubules and form pores and (b) to oxidize the carboxyl groups to carboxylate groups. At least one additional functional unit having at least one available amine group to bind the at least one additional functional unit to the nanotubule end carboxylate group may be provided. Membranes fabricated in accordance with the method of the …

Go to article

Semi-Automatic Image Segmentation For Volumetric Visualization Of Pelvis Ct Scan-Images, Suprijanto Suprijanto, Farida I. Muchtadi, Irwan Setiawan Nov 2009

Semi-Automatic Image Segmentation For Volumetric Visualization Of Pelvis Ct Scan-Images, Suprijanto Suprijanto, Farida I. Muchtadi, Irwan Setiawan

Makara Journal of Technology

Semi-Automatic Image Segmentation for Volumetric Visualization of Pelvis CT Scan-Images. The current development of computerized tomography (CT) has enable us to obtain cross sectional image using multi slicing techniques in an order of few seconds. The obtained images represent several tissue structures on cross section slice being imaged. One challenge to help diagnosis using CT images is extracting an anatomic structure of interest using a method of image segmentation and volumetric visualization with the assistance of computers. In case of volumetric visualization of pelvis bones extracted from multi-slice CT images, whole images which are containing part of pelvis bone structures …

Go to article

Implementation Of Six Sigma Method To Maintain The Quality Of Construction Projects, Yusuf Latief, Retyaning Puji Utami Nov 2009

Implementation Of Six Sigma Method To Maintain The Quality Of Construction Projects, Yusuf Latief, Retyaning Puji Utami

Makara Journal of Technology

Implementation of Six Sigma Method to Maintain The Quality of Construction Projects. Six sigma (6-sigma) is a method that widely developed in the world, especially in manufacturing industry to decrease failures in achieving good quality in construction projects. The objective of this research is to explore the existing condition of quality management and the aplication of 6-sigma method in maintaining quality of construction projects. Structured interviews to experienced experts and people who were recommended by their companies were conducted. Non-parametric analysis using frequencies distribution procedures were used for analysis. The result shows that existing condition in quality management of construction …

Go to article

Mechanical Properties Of Ramie Fiber Reinforced Epoxy Lamina Composite For Socket Prosthesis, Tresna P. Soemardi, Widjajalaksmi Kusumaningsih, Agustinus Purna Irawan Nov 2009

Mechanical Properties Of Ramie Fiber Reinforced Epoxy Lamina Composite For Socket Prosthesis, Tresna P. Soemardi, Widjajalaksmi Kusumaningsih, Agustinus Purna Irawan

Makara Journal of Technology

Mechanical properties of ramie fiber reinforced epoxy lamina composite for socket prosthesis. This paper presents an investigation into the application of natural fiber composite especially ramie fiber reinforced epoxy lamina composite for socket prosthesis. The research focuses on the tensile and shear strength from ramie fiber reinforced epoxy lamina composite which will be applied as alternative material for socket prosthesis. The research based on American Society for Testing Material (ASTM) standard D 3039/D 3039M for tensile strength and ASTM D 4255/D 4255M-83 for shear strength. The ramie fiber applied is a fiber continue 100 % Ne14'S with Epoxy Resin Bakelite …

Go to article

First Prev Next Last